! Started logfile: /scr/pima/bg219i_uvs/J0742+4900_X_dfm.log on Thu May 19 23:08:50 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0742+4900_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0742+4900_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.836508 visibilities/baseline/integration-bin.
! Found source: J0742+4900
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6324 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0742+4900_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 9 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.144223Jy  sigma=30.883705
! Fit after  self-cal, rms=0.459247Jy  sigma=12.295684
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8359 mas, bmaj=1.06 mas, bpa=-7.525 degrees
! Estimated noise=0.487593 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.417229 Jy
! Component: 100  -  total flux cleaned = 0.508445 Jy
! Total flux subtracted in 100 components = 0.508445 Jy
! Clean residual min=-0.007847 max=0.027199 Jy/beam
! Clean residual mean=0.000009 rms=0.002376 Jy/beam
! Combined flux in latest and established models = 0.508445 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.508445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075515Jy  sigma=1.998441
! Fit after  self-cal, rms=0.075512Jy  sigma=1.998251
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0277539 Jy
! Component: 100  -  total flux cleaned = 0.0420909 Jy
! Total flux subtracted in 100 components = 0.0420909 Jy
! Clean residual min=-0.005539 max=0.008514 Jy/beam
! Clean residual mean=0.000003 rms=0.001359 Jy/beam
! Combined flux in latest and established models = 0.550536 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 15 components and 0.550536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062199Jy  sigma=1.579586
! Fit after  self-cal, rms=0.062198Jy  sigma=1.579397
! Inverting map 
! Added new window around map position (0.4, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00922991 Jy
! Component: 100  -  total flux cleaned = 0.0154408 Jy
! Total flux subtracted in 100 components = 0.0154408 Jy
! Clean residual min=-0.004902 max=0.005879 Jy/beam
! Clean residual mean=0.000001 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.565977 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 22 components and 0.565977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060338Jy  sigma=1.518586
! Fit after  self-cal, rms=0.060290Jy  sigma=1.517428
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=1.349 mas, bpa=7.467 degrees
! Estimated noise=0.339293 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00666918 Jy
! Component: 100  -  total flux cleaned = 0.010611 Jy
! Component: 150  -  total flux cleaned = 0.0131318 Jy
! Component: 200  -  total flux cleaned = 0.0147696 Jy
! Total flux subtracted in 200 components = 0.0147696 Jy
! Clean residual min=-0.004076 max=0.005064 Jy/beam
! Clean residual mean=-0.000005 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 0.580746 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.580746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.059625Jy  sigma=1.491703
! Fit after  self-cal, rms=0.059595Jy  sigma=1.490896
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 1.349 at 7.467 degrees (North through East)
! Clean map  min=-0.0040216  max=0.54335 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.98     KP        1.02     
!   LA        0.99     MK        1.04     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.02     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.01     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.01     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        1.02     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.99     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        1.02     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        0.98     KP        1.02     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.059595Jy  sigma=1.490896
! Fit after  self-cal, rms=0.058489Jy  sigma=1.455514
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.354 mas, bpa=7.181 degrees
! Estimated noise=0.33866 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00250588 Jy
! Component: 100  -  total flux cleaned = -0.00293497 Jy
! Component: 150  -  total flux cleaned = -0.00309056 Jy
! Component: 200  -  total flux cleaned = -0.00308985 Jy
! Total flux subtracted in 200 components = -0.00308985 Jy
! Clean residual min=-0.003218 max=0.003220 Jy/beam
! Clean residual mean=-0.000002 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.577656 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 40 components and 0.577656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058355Jy  sigma=1.452796
! Fit after  self-cal, rms=0.058359Jy  sigma=1.452706
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058359Jy  sigma=1.452706
! Fit after  self-cal, rms=0.057706Jy  sigma=1.430268
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.351 mas, bpa=7.286 degrees
! Estimated noise=0.338065 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150649 Jy
! Component: 100  -  total flux cleaned = -0.00170976 Jy
! Component: 150  -  total flux cleaned = -0.00181065 Jy
! Component: 200  -  total flux cleaned = -0.00184129 Jy
! Total flux subtracted in 200 components = -0.00184129 Jy
! Clean residual min=-0.002810 max=0.002657 Jy/beam
! Clean residual mean=-0.000002 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.575815 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 50 components and 0.575815 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057649Jy  sigma=1.428905
! Fit after  self-cal, rms=0.057650Jy  sigma=1.428829
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.86951e-05 Jy
! Component: 100  -  total flux cleaned = -7.83871e-05 Jy
! Component: 150  -  total flux cleaned = -7.87216e-05 Jy
! Component: 200  -  total flux cleaned = -5.65529e-05 Jy
! Total flux subtracted in 200 components = -5.65529e-05 Jy
! Clean residual min=-0.002777 max=0.002645 Jy/beam
! Clean residual mean=-0.000002 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.575758 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.575758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057632Jy  sigma=1.428307
! Fit after  self-cal, rms=0.057631Jy  sigma=1.428292
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057631Jy  sigma=1.428292
! Fit after  self-cal, rms=0.057588Jy  sigma=1.427907
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.064 mas, bmaj=1.352 mas, bpa=7.438 degrees
! Estimated noise=0.33766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102399 Jy
! Component: 100  -  total flux cleaned = -0.00123613 Jy
! Component: 150  -  total flux cleaned = -0.00123579 Jy
! Component: 200  -  total flux cleaned = -0.00121434 Jy
! Total flux subtracted in 200 components = -0.00121434 Jy
! Clean residual min=-0.002662 max=0.002634 Jy/beam
! Clean residual mean=-0.000002 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.574544 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 53 components and 0.574544 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057560Jy  sigma=1.427315
! Fit after  self-cal, rms=0.057559Jy  sigma=1.427290
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108836 Jy
! Component: 100  -  total flux cleaned = -7.06362e-05 Jy
! Component: 150  -  total flux cleaned = -7.05255e-05 Jy
! Component: 200  -  total flux cleaned = -7.00047e-05 Jy
! Total flux subtracted in 200 components = -7.00047e-05 Jy
! Clean residual min=-0.002647 max=0.002614 Jy/beam
! Clean residual mean=-0.000002 rms=0.000602 Jy/beam
! Combined flux in latest and established models = 0.574474 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 54 components and 0.574474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057549Jy  sigma=1.427003
! Fit after  self-cal, rms=0.057549Jy  sigma=1.426994
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057549Jy  sigma=1.426994
! Fit after  self-cal, rms=0.057509Jy  sigma=1.426779
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.21 mas, bmaj=2.376 mas, bpa=-4.881 degrees
! Estimated noise=0.423788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00060102 Jy
! Component: 100  -  total flux cleaned = -0.000659479 Jy
! Component: 150  -  total flux cleaned = -0.000675773 Jy
! Component: 200  -  total flux cleaned = -0.000663244 Jy
! Total flux subtracted in 200 components = -0.000663244 Jy
! Clean residual min=-0.003220 max=0.002752 Jy/beam
! Clean residual mean=-0.000004 rms=0.000805 Jy/beam
! Combined flux in latest and established models = 0.573811 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 58 components and 0.573811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057503Jy  sigma=1.426770
! Fit after  self-cal, rms=0.057499Jy  sigma=1.426672
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000111653 Jy
! Component: 100  -  total flux cleaned = -5.68654e-05 Jy
! Component: 150  -  total flux cleaned = -2.45404e-06 Jy
! Component: 200  -  total flux cleaned = 4.20535e-05 Jy
! Total flux subtracted in 200 components = 4.20535e-05 Jy
! Clean residual min=-0.003207 max=0.002769 Jy/beam
! Clean residual mean=-0.000004 rms=0.000802 Jy/beam
! Combined flux in latest and established models = 0.573853 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 58 components and 0.573853 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057502Jy  sigma=1.426824
! Fit after  self-cal, rms=0.057499Jy  sigma=1.426779
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.065 mas, bmaj=1.353 mas, bpa=7.562 degrees
! Estimated noise=0.337306 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.065 x 1.353 at 7.562 degrees (North through East)
! Clean map  min=-0.0024626  max=0.54075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057499Jy  sigma=1.426779
! Fit after  self-cal, rms=0.054212Jy  sigma=1.342484
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.353 mas, bpa=8.017 degrees
! Estimated noise=0.336218 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00128415 Jy
! Component: 100  -  total flux cleaned = -0.00134625 Jy
! Component: 150  -  total flux cleaned = -0.00134562 Jy
! Component: 200  -  total flux cleaned = -0.00136522 Jy
! Total flux subtracted in 200 components = -0.00136522 Jy
! Clean residual min=-0.002590 max=0.002529 Jy/beam
! Clean residual mean=-0.000002 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.572488 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 61 components and 0.572488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054151Jy  sigma=1.341685
! Fit after  self-cal, rms=0.054150Jy  sigma=1.341669
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.2162e-06 Jy
! Component: 100  -  total flux cleaned = -1.30344e-05 Jy
! Component: 150  -  total flux cleaned = -1.32748e-05 Jy
! Component: 200  -  total flux cleaned = -2.65443e-05 Jy
! Total flux subtracted in 200 components = -2.65443e-05 Jy
! Clean residual min=-0.002579 max=0.002499 Jy/beam
! Clean residual mean=-0.000002 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.572461 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.572461 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054141Jy  sigma=1.341513
! Fit after  self-cal, rms=0.054141Jy  sigma=1.341508
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.054141Jy  sigma=1.341508
! Fit after  self-cal, rms=0.053980Jy  sigma=1.340669
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8403 mas, bmaj=1.061 mas, bpa=-6.835 degrees
! Estimated noise=0.48369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.413865 Jy
! Component: 100  -  total flux cleaned = 0.504219 Jy
! Component: 150  -  total flux cleaned = 0.530108 Jy
! Component: 200  -  total flux cleaned = 0.543795 Jy
! Total flux subtracted in 200 components = 0.543795 Jy
! Clean residual min=-0.004176 max=0.007084 Jy/beam
! Clean residual mean=0.000003 rms=0.001057 Jy/beam
! Combined flux in latest and established models = 0.543795 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.543795 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.353 mas, bpa=8.164 degrees
! Estimated noise=0.33525 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111839 Jy
! Component: 100  -  total flux cleaned = 0.0172786 Jy
! Component: 150  -  total flux cleaned = 0.0209681 Jy
! Component: 200  -  total flux cleaned = 0.0233136 Jy
! Total flux subtracted in 200 components = 0.0233136 Jy
! Clean residual min=-0.002787 max=0.002381 Jy/beam
! Clean residual mean=-0.000003 rms=0.000622 Jy/beam
! Combined flux in latest and established models = 0.567108 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 31 components and 0.567108 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.209 mas, bmaj=2.374 mas, bpa=-4.579 degrees
! Estimated noise=0.421581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241285 Jy
! Component: 100  -  total flux cleaned = 0.00354246 Jy
! Component: 150  -  total flux cleaned = 0.0041086 Jy
! Component: 200  -  total flux cleaned = 0.00436131 Jy
! Total flux subtracted in 200 components = 0.00436131 Jy
! Clean residual min=-0.003024 max=0.002776 Jy/beam
! Clean residual mean=-0.000004 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 0.57147 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.45846e-05 Jy
! Component: 100  -  total flux cleaned = 5.84303e-05 Jy
! Component: 150  -  total flux cleaned = 7.35579e-05 Jy
! Component: 200  -  total flux cleaned = 9.5099e-05 Jy
! Total flux subtracted in 200 components = 9.5099e-05 Jy
! Clean residual min=-0.003011 max=0.002766 Jy/beam
! Clean residual mean=-0.000004 rms=0.000781 Jy/beam
! Combined flux in latest and established models = 0.571565 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 44 components and 0.571565 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.063 mas, bmaj=1.353 mas, bpa=8.164 degrees
! Estimated noise=0.33525 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369487 Jy
! Component: 100  -  total flux cleaned = -0.000392361 Jy
! Component: 150  -  total flux cleaned = -0.000393111 Jy
! Component: 200  -  total flux cleaned = -0.00042799 Jy
! Total flux subtracted in 200 components = -0.00042799 Jy
! Clean residual min=-0.002603 max=0.002495 Jy/beam
! Clean residual mean=-0.000002 rms=0.000596 Jy/beam
! Combined flux in latest and established models = 0.571137 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.571137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.053944Jy  sigma=1.340539
! Fit after  self-cal, rms=0.053941Jy  sigma=1.340502
wmodel /J0742+4900_X_map.mod
! wmodel: Unable to open new model file: /J0742+4900_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0742+4900_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.063 x 1.353 at 8.164 degrees (North through East)
! Clean map  min=-0.0023869  max=0.53772 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0742+4900_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.537719 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000595804 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.332406 0.332406 0.664813 1.32963 2.65925 5.3185 10.637 21.274 42.548 85.096
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.537 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  902.509 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0742+4900_X_dfm.log closed on Thu May 19 23:08:53 2016