! Started logfile: /scr/pima/bg219i_uvs/J0732+0150_X_dfm.log on Thu May 19 23:08:35 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0732+0150_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0732+0150_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.884568 visibilities/baseline/integration-bin.
! Found source: J0732+0150
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 17196 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0732+0150_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.011551Jy  sigma=23.172660
! Fit after  self-cal, rms=0.873113Jy  sigma=19.959285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7639 mas, bmaj=1.672 mas, bpa=-5.118 degrees
! Estimated noise=0.441281 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.093239 Jy
! Component: 100  -  total flux cleaned = 0.127394 Jy
! Total flux subtracted in 100 components = 0.127394 Jy
! Clean residual min=-0.006048 max=0.014528 Jy/beam
! Clean residual mean=-0.000001 rms=0.001515 Jy/beam
! Combined flux in latest and established models = 0.127394 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.127394 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074407Jy  sigma=1.590486
! Fit after  self-cal, rms=0.073967Jy  sigma=1.581063
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160278 Jy
! Component: 100  -  total flux cleaned = 0.0244458 Jy
! Total flux subtracted in 100 components = 0.0244458 Jy
! Clean residual min=-0.004079 max=0.007828 Jy/beam
! Clean residual mean=-0.000000 rms=0.000997 Jy/beam
! Combined flux in latest and established models = 0.15184 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.15184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069178Jy  sigma=1.449995
! Fit after  self-cal, rms=0.069132Jy  sigma=1.449082
! Inverting map 
! Added new window around map position (-2.4, -3.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00703332 Jy
! Component: 100  -  total flux cleaned = 0.0114235 Jy
! Total flux subtracted in 100 components = 0.0114235 Jy
! Clean residual min=-0.003404 max=0.003515 Jy/beam
! Clean residual mean=-0.000000 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.163263 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 33 components and 0.163263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068151Jy  sigma=1.420465
! Fit after  self-cal, rms=0.068108Jy  sigma=1.419386
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9502 mas, bmaj=1.989 mas, bpa=-4.091 degrees
! Estimated noise=0.259655 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, -3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00652839 Jy
! Component: 100  -  total flux cleaned = 0.011064 Jy
! Component: 150  -  total flux cleaned = 0.0143521 Jy
! Component: 200  -  total flux cleaned = 0.0167831 Jy
! Total flux subtracted in 200 components = 0.0167831 Jy
! Clean residual min=-0.002435 max=0.002680 Jy/beam
! Clean residual mean=0.000001 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.180047 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 68 components and 0.180047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067428Jy  sigma=1.397414
! Fit after  self-cal, rms=0.067392Jy  sigma=1.396386
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9502 x 1.989 at -4.091 degrees (North through East)
! Clean map  min=-0.0024592  max=0.12556 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        0.96     
!   LA        0.97     MK        1.06     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.01     KP        0.97     
!   LA        0.96     MK        1.02     NL        0.99     OV        0.97     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.99     HN        0.99     KP        1.03     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.93     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.02     KP        0.99     
!   LA        0.96     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.03     KP        1.02     
!   LA        0.93     MK        1.03     NL        1.03     OV        0.95     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.93     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.97     MK        1.06     NL        0.98     OV        0.97     
!   PT        1.08     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.94     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.09     KP        1.01     
!   LA        0.97     MK        0.98     NL        1.00     OV        0.95     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        0.97     KP        1.00     
!   LA        0.96     MK        1.02     NL        1.03     OV        0.95     
!   PT        1.03     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        0.98     
!   LA        1.00     MK        0.93     NL        1.00     OV        0.96     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.97     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.96     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.067392Jy  sigma=1.396386
! Fit after  self-cal, rms=0.066863Jy  sigma=1.389477
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9563 mas, bmaj=2.001 mas, bpa=-3.974 degrees
! Estimated noise=0.25672 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151788 Jy
! Component: 100  -  total flux cleaned = 0.00196447 Jy
! Component: 150  -  total flux cleaned = 0.00227784 Jy
! Component: 200  -  total flux cleaned = 0.00255898 Jy
! Total flux subtracted in 200 components = 0.00255898 Jy
! Clean residual min=-0.002126 max=0.002165 Jy/beam
! Clean residual mean=0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.182606 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 87 components and 0.182606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066806Jy  sigma=1.388008
! Fit after  self-cal, rms=0.066822Jy  sigma=1.387749
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066822Jy  sigma=1.387749
! Fit after  self-cal, rms=0.068027Jy  sigma=1.381097
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.954 mas, bmaj=1.997 mas, bpa=-4.012 degrees
! Estimated noise=0.256535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00116408 Jy
! Component: 100  -  total flux cleaned = 0.00167962 Jy
! Component: 150  -  total flux cleaned = 0.00188543 Jy
! Component: 200  -  total flux cleaned = 0.00203698 Jy
! Total flux subtracted in 200 components = 0.00203698 Jy
! Clean residual min=-0.001589 max=0.001622 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.184643 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 111 components and 0.184642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068004Jy  sigma=1.380498
! Fit after  self-cal, rms=0.068038Jy  sigma=1.380343
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411138 Jy
! Component: 100  -  total flux cleaned = 0.000527184 Jy
! Component: 150  -  total flux cleaned = 0.000624084 Jy
! Component: 200  -  total flux cleaned = 0.000707697 Jy
! Total flux subtracted in 200 components = 0.000707697 Jy
! Clean residual min=-0.001605 max=0.001598 Jy/beam
! Clean residual mean=0.000001 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.18535 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 120 components and 0.18535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068031Jy  sigma=1.380181
! Fit after  self-cal, rms=0.068030Jy  sigma=1.380157
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068030Jy  sigma=1.380157
! Fit after  self-cal, rms=0.068057Jy  sigma=1.380039
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9529 mas, bmaj=1.995 mas, bpa=-4.07 degrees
! Estimated noise=0.256193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000563734 Jy
! Component: 100  -  total flux cleaned = 0.000799883 Jy
! Component: 150  -  total flux cleaned = 0.000989591 Jy
! Component: 200  -  total flux cleaned = 0.00113658 Jy
! Total flux subtracted in 200 components = 0.00113658 Jy
! Clean residual min=-0.001539 max=0.001464 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.186487 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 130 components and 0.186487 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068050Jy  sigma=1.379885
! Fit after  self-cal, rms=0.068053Jy  sigma=1.379859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000262123 Jy
! Component: 100  -  total flux cleaned = 0.000369004 Jy
! Component: 150  -  total flux cleaned = 0.000415685 Jy
! Component: 200  -  total flux cleaned = 0.000441188 Jy
! Total flux subtracted in 200 components = 0.000441188 Jy
! Clean residual min=-0.001541 max=0.001454 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.186928 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 138 components and 0.186928 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068050Jy  sigma=1.379796
! Fit after  self-cal, rms=0.068049Jy  sigma=1.379787
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068049Jy  sigma=1.379787
! Fit after  self-cal, rms=0.068014Jy  sigma=1.379749
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.124 mas, bmaj=3.241 mas, bpa=-1.142 degrees
! Estimated noise=0.323504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000757196 Jy
! Component: 100  -  total flux cleaned = 0.00107184 Jy
! Component: 150  -  total flux cleaned = 0.00116759 Jy
! Component: 200  -  total flux cleaned = 0.00118448 Jy
! Total flux subtracted in 200 components = 0.00118448 Jy
! Clean residual min=-0.001736 max=0.001628 Jy/beam
! Clean residual mean=0.000001 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.188112 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 150 components and 0.188112 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068012Jy  sigma=1.379768
! Fit after  self-cal, rms=0.068012Jy  sigma=1.379724
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000275991 Jy
! Component: 100  -  total flux cleaned = 0.000356491 Jy
! Component: 150  -  total flux cleaned = 0.000381057 Jy
! Component: 200  -  total flux cleaned = 0.000387916 Jy
! Total flux subtracted in 200 components = 0.000387916 Jy
! Clean residual min=-0.001714 max=0.001643 Jy/beam
! Clean residual mean=0.000001 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.1885 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 153 components and 0.1885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068013Jy  sigma=1.379761
! Fit after  self-cal, rms=0.068012Jy  sigma=1.379748
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9522 mas, bmaj=1.994 mas, bpa=-4.101 degrees
! Estimated noise=0.255957 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9522 x 1.994 at -4.101 degrees (North through East)
! Clean map  min=-0.0013781  max=0.1232 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7651 mas, bmaj=1.674 mas, bpa=-5.084 degrees
! Estimated noise=0.435886 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0924579 Jy
! Component: 100  -  total flux cleaned = 0.127002 Jy
! Component: 150  -  total flux cleaned = 0.142522 Jy
! Component: 200  -  total flux cleaned = 0.151532 Jy
! Total flux subtracted in 200 components = 0.151532 Jy
! Clean residual min=-0.003352 max=0.004776 Jy/beam
! Clean residual mean=-0.000001 rms=0.000845 Jy/beam
! Combined flux in latest and established models = 0.151532 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.151532 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9522 mas, bmaj=1.994 mas, bpa=-4.101 degrees
! Estimated noise=0.255957 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010116 Jy
! Component: 100  -  total flux cleaned = 0.0168444 Jy
! Component: 150  -  total flux cleaned = 0.0215724 Jy
! Component: 200  -  total flux cleaned = 0.0249926 Jy
! Total flux subtracted in 200 components = 0.0249926 Jy
! Clean residual min=-0.002041 max=0.001957 Jy/beam
! Clean residual mean=0.000000 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.176525 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 52 components and 0.176525 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.124 mas, bmaj=3.241 mas, bpa=-1.142 degrees
! Estimated noise=0.323504 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00441574 Jy
! Component: 100  -  total flux cleaned = 0.00708121 Jy
! Component: 150  -  total flux cleaned = 0.00879674 Jy
! Component: 200  -  total flux cleaned = 0.00992492 Jy
! Total flux subtracted in 200 components = 0.00992492 Jy
! Clean residual min=-0.001781 max=0.001607 Jy/beam
! Clean residual mean=0.000001 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.18645 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00075658 Jy
! Component: 100  -  total flux cleaned = 0.00127025 Jy
! Component: 150  -  total flux cleaned = 0.00162393 Jy
! Component: 200  -  total flux cleaned = 0.00173368 Jy
! Total flux subtracted in 200 components = 0.00173368 Jy
! Clean residual min=-0.001734 max=0.001604 Jy/beam
! Clean residual mean=0.000001 rms=0.000445 Jy/beam
! Combined flux in latest and established models = 0.188183 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 111 components and 0.188183 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9522 mas, bmaj=1.994 mas, bpa=-4.101 degrees
! Estimated noise=0.255957 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.29627e-05 Jy
! Component: 100  -  total flux cleaned = 1.10466e-05 Jy
! Component: 150  -  total flux cleaned = 5.95028e-05 Jy
! Component: 200  -  total flux cleaned = 0.000143981 Jy
! Total flux subtracted in 200 components = 0.000143981 Jy
! Clean residual min=-0.001496 max=0.001530 Jy/beam
! Clean residual mean=0.000001 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.188327 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 125 components and 0.188327 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068023Jy  sigma=1.379930
! Fit after  self-cal, rms=0.068019Jy  sigma=1.379884
wmodel /J0732+0150_X_map.mod
! wmodel: Unable to open new model file: /J0732+0150_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0732+0150_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9522 x 1.994 at -4.101 degrees (North through East)
! Clean map  min=-0.0013855  max=0.12285 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0732+0150_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.122845 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000354075 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.864685 0.864685 1.72937 3.45874 6.91748 13.835 27.6699 55.3399
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.122 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  346.946 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0732+0150_X_dfm.log closed on Thu May 19 23:08:38 2016