! Started logfile: /scr/pima/bg219i_uvs/J0727+4844_X_dfm.log on Thu May 19 23:08:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0727+4844_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0727+4844_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.868519 visibilities/baseline/integration-bin.
! Found source: J0727+4844
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 16884 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0727+4844_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009642Jy  sigma=24.292793
! Fit after  self-cal, rms=0.862503Jy  sigma=20.734443
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8329 mas, bmaj=1.039 mas, bpa=-15.39 degrees
! Estimated noise=0.441143 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103904 Jy
! Component: 100  -  total flux cleaned = 0.128952 Jy
! Total flux subtracted in 100 components = 0.128952 Jy
! Clean residual min=-0.004412 max=0.010302 Jy/beam
! Clean residual mean=-0.000004 rms=0.001107 Jy/beam
! Combined flux in latest and established models = 0.128952 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.128952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063992Jy  sigma=1.467318
! Fit after  self-cal, rms=0.063880Jy  sigma=1.464441
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114279 Jy
! Component: 100  -  total flux cleaned = 0.0178065 Jy
! Total flux subtracted in 100 components = 0.0178065 Jy
! Clean residual min=-0.003020 max=0.003228 Jy/beam
! Clean residual mean=-0.000003 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.146758 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.146758 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061310Jy  sigma=1.392249
! Fit after  self-cal, rms=0.061321Jy  sigma=1.392037
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.066 mas, bmaj=1.301 mas, bpa=-10.13 degrees
! Estimated noise=0.247763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536363 Jy
! Component: 100  -  total flux cleaned = 0.0081121 Jy
! Component: 150  -  total flux cleaned = 0.00977721 Jy
! Component: 200  -  total flux cleaned = 0.0108031 Jy
! Total flux subtracted in 200 components = 0.0108031 Jy
! Clean residual min=-0.001949 max=0.003227 Jy/beam
! Clean residual mean=-0.000010 rms=0.000501 Jy/beam
! Combined flux in latest and established models = 0.157561 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 25 components and 0.157561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060911Jy  sigma=1.379664
! Fit after  self-cal, rms=0.060919Jy  sigma=1.379557
! Inverting map 
! Added new window around map position (-1.2, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00312272 Jy
! Component: 100  -  total flux cleaned = 0.0048471 Jy
! Component: 150  -  total flux cleaned = 0.00596785 Jy
! Component: 200  -  total flux cleaned = 0.00672243 Jy
! Total flux subtracted in 200 components = 0.00672243 Jy
! Clean residual min=-0.001552 max=0.001822 Jy/beam
! Clean residual mean=-0.000006 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.164284 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 46 components and 0.164284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060747Jy  sigma=1.375554
! Fit after  self-cal, rms=0.060739Jy  sigma=1.375195
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.066 x 1.301 at -10.13 degrees (North through East)
! Clean map  min=-0.0014642  max=0.13816 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.00     KP        0.96     
!   LA        1.01     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.04     NL        0.99     OV        0.94     
!   PT        0.97     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.96     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.99     KP        0.98     
!   LA        1.00     MK        1.00     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.03     KP        1.01     
!   LA        0.97     MK        1.03     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.04     KP        0.99     
!   LA        1.01     MK        0.97     NL        1.04     OV        0.99     
!   PT        0.99     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.06     HN        0.95     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.97     KP        1.01     
!   LA        1.03     MK        1.01     NL        1.01     OV        0.99     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        1.02     KP        0.96     
!   LA        1.01     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.01     HN        1.05     KP        1.02     
!   LA        1.02     MK        0.95     NL        1.00     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.04     KP        1.00     
!   LA        1.02     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.060739Jy  sigma=1.375195
! Fit after  self-cal, rms=0.061268Jy  sigma=1.370645
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.07 mas, bmaj=1.307 mas, bpa=-10.57 degrees
! Estimated noise=0.248572 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180098 Jy
! Component: 100  -  total flux cleaned = 0.00271779 Jy
! Component: 150  -  total flux cleaned = 0.00312153 Jy
! Component: 200  -  total flux cleaned = 0.003253 Jy
! Total flux subtracted in 200 components = 0.003253 Jy
! Clean residual min=-0.001392 max=0.001289 Jy/beam
! Clean residual mean=-0.000002 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.167537 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 68 components and 0.167537 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061207Jy  sigma=1.369176
! Fit after  self-cal, rms=0.061219Jy  sigma=1.369071
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061219Jy  sigma=1.369071
! Fit after  self-cal, rms=0.061252Jy  sigma=1.365100
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.07 mas, bmaj=1.304 mas, bpa=-10.18 degrees
! Estimated noise=0.248136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000320843 Jy
! Component: 100  -  total flux cleaned = 0.000362768 Jy
! Component: 150  -  total flux cleaned = 0.000363253 Jy
! Component: 200  -  total flux cleaned = 0.000397299 Jy
! Total flux subtracted in 200 components = 0.000397299 Jy
! Clean residual min=-0.001277 max=0.001215 Jy/beam
! Clean residual mean=0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.167934 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.167934 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061238Jy  sigma=1.364825
! Fit after  self-cal, rms=0.061249Jy  sigma=1.364772
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.81088e-05 Jy
! Component: 100  -  total flux cleaned = 0.000133618 Jy
! Component: 150  -  total flux cleaned = 0.000162333 Jy
! Component: 200  -  total flux cleaned = 0.000204315 Jy
! Total flux subtracted in 200 components = 0.000204315 Jy
! Clean residual min=-0.001279 max=0.001221 Jy/beam
! Clean residual mean=0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.168138 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 81 components and 0.168138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061242Jy  sigma=1.364639
! Fit after  self-cal, rms=0.061242Jy  sigma=1.364635
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061242Jy  sigma=1.364635
! Fit after  self-cal, rms=0.061266Jy  sigma=1.364612
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.305 mas, bpa=-10.15 degrees
! Estimated noise=0.248132 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.54845e-05 Jy
! Component: 100  -  total flux cleaned = -8.68708e-05 Jy
! Component: 150  -  total flux cleaned = -8.66573e-05 Jy
! Component: 200  -  total flux cleaned = -8.65851e-05 Jy
! Total flux subtracted in 200 components = -8.65851e-05 Jy
! Clean residual min=-0.001273 max=0.001215 Jy/beam
! Clean residual mean=0.000003 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.168052 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.168052 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061259Jy  sigma=1.364496
! Fit after  self-cal, rms=0.061260Jy  sigma=1.364492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.05622e-07 Jy
! Component: 100  -  total flux cleaned = 1.27968e-05 Jy
! Component: 150  -  total flux cleaned = 1.2543e-05 Jy
! Component: 200  -  total flux cleaned = 1.24765e-05 Jy
! Total flux subtracted in 200 components = 1.24765e-05 Jy
! Clean residual min=-0.001271 max=0.001213 Jy/beam
! Clean residual mean=0.000003 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.168064 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 90 components and 0.168064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061255Jy  sigma=1.364407
! Fit after  self-cal, rms=0.061255Jy  sigma=1.364407
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061255Jy  sigma=1.364407
! Fit after  self-cal, rms=0.061263Jy  sigma=1.364398
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.292 mas, bmaj=2.425 mas, bpa=-13.45 degrees
! Estimated noise=0.310399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103882 Jy
! Component: 100  -  total flux cleaned = -9.39282e-05 Jy
! Component: 150  -  total flux cleaned = -9.3202e-05 Jy
! Component: 200  -  total flux cleaned = -0.000107747 Jy
! Total flux subtracted in 200 components = -0.000107747 Jy
! Clean residual min=-0.001210 max=0.001308 Jy/beam
! Clean residual mean=0.000007 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.167957 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 98 components and 0.167957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061262Jy  sigma=1.364387
! Fit after  self-cal, rms=0.061262Jy  sigma=1.364375
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.84924e-05 Jy
! Component: 100  -  total flux cleaned = -5.36155e-05 Jy
! Component: 150  -  total flux cleaned = -6.01587e-05 Jy
! Component: 200  -  total flux cleaned = -7.20267e-05 Jy
! Total flux subtracted in 200 components = -7.20267e-05 Jy
! Clean residual min=-0.001209 max=0.001311 Jy/beam
! Clean residual mean=0.000006 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.167885 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 105 components and 0.167885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061262Jy  sigma=1.364372
! Fit after  self-cal, rms=0.061261Jy  sigma=1.364366
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.305 mas, bpa=-10.13 degrees
! Estimated noise=0.248094 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.071 x 1.305 at -10.13 degrees (North through East)
! Clean map  min=-0.0011383  max=0.13849 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8357 mas, bmaj=1.041 mas, bpa=-15.43 degrees
! Estimated noise=0.443892 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104441 Jy
! Component: 100  -  total flux cleaned = 0.129641 Jy
! Component: 150  -  total flux cleaned = 0.140924 Jy
! Component: 200  -  total flux cleaned = 0.147142 Jy
! Total flux subtracted in 200 components = 0.147142 Jy
! Clean residual min=-0.002820 max=0.003081 Jy/beam
! Clean residual mean=-0.000001 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.147142 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.147142 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.305 mas, bpa=-10.13 degrees
! Estimated noise=0.248094 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507813 Jy
! Component: 100  -  total flux cleaned = 0.008351 Jy
! Component: 150  -  total flux cleaned = 0.0107567 Jy
! Component: 200  -  total flux cleaned = 0.012632 Jy
! Total flux subtracted in 200 components = 0.012632 Jy
! Clean residual min=-0.001547 max=0.001484 Jy/beam
! Clean residual mean=-0.000002 rms=0.000359 Jy/beam
! Combined flux in latest and established models = 0.159774 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 39 components and 0.159774 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.292 mas, bmaj=2.425 mas, bpa=-13.45 degrees
! Estimated noise=0.310399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235219 Jy
! Component: 100  -  total flux cleaned = 0.00391138 Jy
! Component: 150  -  total flux cleaned = 0.00502373 Jy
! Component: 200  -  total flux cleaned = 0.0058489 Jy
! Total flux subtracted in 200 components = 0.0058489 Jy
! Clean residual min=-0.001224 max=0.001476 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.165623 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000510898 Jy
! Component: 100  -  total flux cleaned = 0.000816372 Jy
! Component: 150  -  total flux cleaned = 0.00106892 Jy
! Component: 200  -  total flux cleaned = 0.00127887 Jy
! Total flux subtracted in 200 components = 0.00127887 Jy
! Clean residual min=-0.001202 max=0.001395 Jy/beam
! Clean residual mean=0.000005 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.166902 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 97 components and 0.166902 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.071 mas, bmaj=1.305 mas, bpa=-10.13 degrees
! Estimated noise=0.248094 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.21373e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100301 Jy
! Component: 150  -  total flux cleaned = 0.000186364 Jy
! Component: 200  -  total flux cleaned = 0.000206291 Jy
! Total flux subtracted in 200 components = 0.000206291 Jy
! Clean residual min=-0.001332 max=0.001224 Jy/beam
! Clean residual mean=0.000002 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.167108 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.167108 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061285Jy  sigma=1.364913
! Fit after  self-cal, rms=0.061280Jy  sigma=1.364863
wmodel /J0727+4844_X_map.mod
! wmodel: Unable to open new model file: /J0727+4844_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0727+4844_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.071 x 1.305 at -10.13 degrees (North through East)
! Clean map  min=-0.0011644  max=0.13918 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0727+4844_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.139185 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297909 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.642117 0.642117 1.28423 2.56847 5.13694 10.2739 20.5478 41.0955 82.191
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.139 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  467.204 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0727+4844_X_dfm.log closed on Thu May 19 23:08:30 2016