! Started logfile: /scr/pima/bg219i_uvs/J0656+0315_X_dfm.log on Thu May 19 23:07:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0656+0315_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0656+0315_X_uva.fits
! AN table 1: 62 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.712186 visibilities/baseline/integration-bin.
! Found source: J0656+0315
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 23844 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0656+0315_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001766Jy  sigma=24.395380
! Fit after  self-cal, rms=0.961981Jy  sigma=23.432568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8828 mas, bmaj=1.847 mas, bpa=-0.6321 degrees
! Estimated noise=0.344207 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0297728 Jy
! Component: 100  -  total flux cleaned = 0.0364607 Jy
! Total flux subtracted in 100 components = 0.0364607 Jy
! Clean residual min=-0.002553 max=0.002606 Jy/beam
! Clean residual mean=-0.000000 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0364607 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0364607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060843Jy  sigma=1.378701
! Fit after  self-cal, rms=0.058812Jy  sigma=1.327297
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00480179 Jy
! Component: 100  -  total flux cleaned = 0.00720215 Jy
! Total flux subtracted in 100 components = 0.00720215 Jy
! Clean residual min=-0.002234 max=0.002557 Jy/beam
! Clean residual mean=0.000000 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.0436629 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.0436629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058266Jy  sigma=1.314734
! Fit after  self-cal, rms=0.058248Jy  sigma=1.314043
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.215 mas, bpa=1.385 degrees
! Estimated noise=0.205107 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257966 Jy
! Component: 100  -  total flux cleaned = 0.00382868 Jy
! Component: 150  -  total flux cleaned = 0.0040768 Jy
! Component: 200  -  total flux cleaned = 0.00427748 Jy
! Total flux subtracted in 200 components = 0.00427748 Jy
! Clean residual min=-0.001844 max=0.002330 Jy/beam
! Clean residual mean=0.000001 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.0479403 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.0479404 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.058119Jy  sigma=1.310925
! Fit after  self-cal, rms=0.058107Jy  sigma=1.310465
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.083 x 2.215 at 1.385 degrees (North through East)
! Clean map  min=-0.0017856  max=0.042557 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.05     KP        1.04     
!   LA        1.08     MK        1.04     NL        1.10     OV        0.98     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.04     KP        0.99     
!   LA        1.01     MK        1.18     NL        1.08     OV        0.98     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        0.99     KP        1.13     
!   LA        0.95     MK        0.99     NL        1.10     OV        1.07     
!   PT        0.95     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.00     HN        0.95     KP        1.15     
!   LA        0.97     MK        1.07     NL        1.12     OV        1.01     
!   PT        0.98     SC        1.05     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        0.99     KP        1.15     
!   LA        0.93     MK        1.09     NL        1.14     OV        0.94     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        0.98     KP        1.19     
!   LA        0.93     MK        1.00     NL        1.05     OV        0.99     
!   PT        0.99     SC        1.12     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.87     KP        1.12     
!   LA        0.94     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.92     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        0.87     KP        1.19     
!   LA        0.94     MK        0.89     NL        1.03     OV        1.06     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.91     FD        0.93     HN        0.91     KP        1.07     
!   LA        1.00     MK        0.91     NL        1.04     OV        1.00     
!   PT        0.94     SC        0.88     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.058107Jy  sigma=1.310465
! Fit after  self-cal, rms=0.057912Jy  sigma=1.307888
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.218 mas, bpa=1.222 degrees
! Estimated noise=0.206242 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000730572 Jy
! Component: 100  -  total flux cleaned = 0.000862036 Jy
! Component: 150  -  total flux cleaned = 0.000954028 Jy
! Component: 200  -  total flux cleaned = 0.00103511 Jy
! Total flux subtracted in 200 components = 0.00103511 Jy
! Clean residual min=-0.001582 max=0.001733 Jy/beam
! Clean residual mean=0.000001 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.0489755 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 39 components and 0.0489755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057885Jy  sigma=1.307262
! Fit after  self-cal, rms=0.057894Jy  sigma=1.306271
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057894Jy  sigma=1.306271
! Fit after  self-cal, rms=0.057470Jy  sigma=1.303629
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.083 mas, bmaj=2.212 mas, bpa=1.255 degrees
! Estimated noise=0.206183 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000342329 Jy
! Component: 100  -  total flux cleaned = 0.000304043 Jy
! Component: 150  -  total flux cleaned = 0.000271361 Jy
! Component: 200  -  total flux cleaned = 0.000271799 Jy
! Total flux subtracted in 200 components = 0.000271799 Jy
! Clean residual min=-0.001460 max=0.001611 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.0492473 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 43 components and 0.0492473 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057458Jy  sigma=1.303352
! Fit after  self-cal, rms=0.057483Jy  sigma=1.302939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166854 Jy
! Component: 100  -  total flux cleaned = 0.00258209 Jy
! Component: 150  -  total flux cleaned = 0.00310582 Jy
! Component: 200  -  total flux cleaned = 0.00337026 Jy
! Total flux subtracted in 200 components = 0.00337026 Jy
! Clean residual min=-0.001300 max=0.001267 Jy/beam
! Clean residual mean=0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.0526175 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 70 components and 0.0526175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057431Jy  sigma=1.301711
! Fit after  self-cal, rms=0.057405Jy  sigma=1.301251
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057405Jy  sigma=1.301251
! Fit after  self-cal, rms=0.057392Jy  sigma=1.300963
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.08 mas, bmaj=2.207 mas, bpa=1.466 degrees
! Estimated noise=0.205984 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000911344 Jy
! Component: 100  -  total flux cleaned = 0.00148893 Jy
! Component: 150  -  total flux cleaned = 0.00182353 Jy
! Component: 200  -  total flux cleaned = 0.00195463 Jy
! Total flux subtracted in 200 components = 0.00195463 Jy
! Clean residual min=-0.001338 max=0.001186 Jy/beam
! Clean residual mean=0.000001 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.0545722 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 76 components and 0.0545722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057373Jy  sigma=1.300526
! Fit after  self-cal, rms=0.057374Jy  sigma=1.300378
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000488362 Jy
! Component: 100  -  total flux cleaned = 0.000604281 Jy
! Component: 150  -  total flux cleaned = 0.000663425 Jy
! Component: 200  -  total flux cleaned = 0.000704307 Jy
! Total flux subtracted in 200 components = 0.000704307 Jy
! Clean residual min=-0.001322 max=0.001191 Jy/beam
! Clean residual mean=0.000001 rms=0.000279 Jy/beam
! Combined flux in latest and established models = 0.0552765 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 83 components and 0.0552765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057365Jy  sigma=1.300183
! Fit after  self-cal, rms=0.057362Jy  sigma=1.300141
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057362Jy  sigma=1.300141
! Fit after  self-cal, rms=0.057411Jy  sigma=1.300064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.285 mas, bmaj=3.36 mas, bpa=-0.2677 degrees
! Estimated noise=0.252536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00090013 Jy
! Component: 100  -  total flux cleaned = 0.00143808 Jy
! Component: 150  -  total flux cleaned = 0.0016945 Jy
! Component: 200  -  total flux cleaned = 0.00175313 Jy
! Total flux subtracted in 200 components = 0.00175313 Jy
! Clean residual min=-0.001155 max=0.001392 Jy/beam
! Clean residual mean=0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.0570296 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 92 components and 0.0570296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057407Jy  sigma=1.299955
! Fit after  self-cal, rms=0.057404Jy  sigma=1.299866
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000386824 Jy
! Component: 100  -  total flux cleaned = 0.000424596 Jy
! Component: 150  -  total flux cleaned = 0.000456757 Jy
! Component: 200  -  total flux cleaned = 0.000476571 Jy
! Total flux subtracted in 200 components = 0.000476571 Jy
! Clean residual min=-0.001119 max=0.001348 Jy/beam
! Clean residual mean=0.000001 rms=0.000309 Jy/beam
! Combined flux in latest and established models = 0.0575062 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 94 components and 0.0575062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057403Jy  sigma=1.299841
! Fit after  self-cal, rms=0.057401Jy  sigma=1.299824
! Inverting map 
! Added new window around map position (38, -22.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111174 Jy
! Component: 100  -  total flux cleaned = 0.0012834 Jy
! Component: 150  -  total flux cleaned = 0.0014524 Jy
! Component: 200  -  total flux cleaned = 0.00159691 Jy
! Total flux subtracted in 200 components = 0.00159691 Jy
! Clean residual min=-0.001111 max=0.000904 Jy/beam
! Clean residual mean=0.000000 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.0591031 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 131 components and 0.0591031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057379Jy  sigma=1.299267
! Fit after  self-cal, rms=0.057371Jy  sigma=1.299133
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.204 mas, bpa=1.573 degrees
! Estimated noise=0.206173 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 2.204 at 1.573 degrees (North through East)
! Clean map  min=-0.0011284  max=0.042849 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8774 mas, bmaj=1.829 mas, bpa=-0.4398 degrees
! Estimated noise=0.342865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0316745 Jy
! Component: 100  -  total flux cleaned = 0.0394523 Jy
! Component: 150  -  total flux cleaned = 0.0434051 Jy
! Component: 200  -  total flux cleaned = 0.0458445 Jy
! Total flux subtracted in 200 components = 0.0458445 Jy
! Clean residual min=-0.002131 max=0.002528 Jy/beam
! Clean residual mean=0.000000 rms=0.000533 Jy/beam
! Combined flux in latest and established models = 0.0458445 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0458445 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.204 mas, bpa=1.573 degrees
! Estimated noise=0.206173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00304714 Jy
! Component: 100  -  total flux cleaned = 0.00521522 Jy
! Component: 150  -  total flux cleaned = 0.00685839 Jy
! Component: 200  -  total flux cleaned = 0.00799819 Jy
! Total flux subtracted in 200 components = 0.00799819 Jy
! Clean residual min=-0.001492 max=0.001408 Jy/beam
! Clean residual mean=0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.0538427 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 47 components and 0.0538427 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.285 mas, bmaj=3.36 mas, bpa=-0.2677 degrees
! Estimated noise=0.252536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185787 Jy
! Component: 100  -  total flux cleaned = 0.00321439 Jy
! Component: 150  -  total flux cleaned = 0.00416829 Jy
! Component: 200  -  total flux cleaned = 0.00479602 Jy
! Total flux subtracted in 200 components = 0.00479602 Jy
! Clean residual min=-0.001119 max=0.001036 Jy/beam
! Clean residual mean=0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0586387 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511724 Jy
! Component: 100  -  total flux cleaned = 0.000762222 Jy
! Component: 150  -  total flux cleaned = 0.000966006 Jy
! Component: 200  -  total flux cleaned = 0.0011097 Jy
! Total flux subtracted in 200 components = 0.0011097 Jy
! Clean residual min=-0.001012 max=0.000909 Jy/beam
! Clean residual mean=0.000000 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.0597484 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 79 components and 0.0597484 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.078 mas, bmaj=2.204 mas, bpa=1.573 degrees
! Estimated noise=0.206173 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257818 Jy
! Component: 100  -  total flux cleaned = 0.000260426 Jy
! Component: 150  -  total flux cleaned = 0.000261784 Jy
! Component: 200  -  total flux cleaned = 0.0002077 Jy
! Total flux subtracted in 200 components = 0.0002077 Jy
! Clean residual min=-0.001287 max=0.001198 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0599561 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 103 components and 0.0599561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.057381Jy  sigma=1.299415
! Fit after  self-cal, rms=0.057374Jy  sigma=1.299209
wmodel /J0656+0315_X_map.mod
! wmodel: Unable to open new model file: /J0656+0315_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0656+0315_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.078 x 2.204 at 1.573 degrees (North through East)
! Clean map  min=-0.0011754  max=0.04281 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0656+0315_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0428099 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000252252 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.76771 1.76771 3.53543 7.07085 14.1417 28.2834 56.5668
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.042 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  169.71 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0656+0315_X_dfm.log closed on Thu May 19 23:07:57 2016