! Started logfile: /scr/pima/bg219i_uvs/J0643+0857_S_dfm.log on Thu May 19 23:07:38 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0643+0857_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0643+0857_S_uva.fits
! AN table 1: 31 integrations on 1 of 1 possible baselines.
! AN table 2: 62 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.483871 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0643+0857
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1860 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0643+0857_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 62 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 62 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 62 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 62 telescope corrections were flagged in sub-array 1.
!  A total of 148 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.035618Jy  sigma=23.549993
! Fit after  self-cal, rms=0.808088Jy  sigma=18.832507
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=22.55 mas, bmaj=33.62 mas, bpa=14.08 degrees
! Estimated noise=1.06503 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.199796 Jy
! Component: 100  -  total flux cleaned = 0.281293 Jy
! Total flux subtracted in 100 components = 0.281293 Jy
! Clean residual min=-0.052824 max=0.053569 Jy/beam
! Clean residual mean=-0.004676 rms=0.024468 Jy/beam
! Combined flux in latest and established models = 0.281293 Jy
! Performing phase self-cal
! Adding 60 model components to the UV plane model.
! The established model now contains 60 components and 0.281293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.119360Jy  sigma=2.424711
! Fit after  self-cal, rms=0.118688Jy  sigma=2.409250
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=23.88 mas, bmaj=30.67 mas, bpa=19.5 degrees
! Estimated noise=0.859352 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0031793 Jy
! Component: 100  -  total flux cleaned = -0.00625682 Jy
! Component: 150  -  total flux cleaned = -0.0149559 Jy
! Component: 200  -  total flux cleaned = -0.0270184 Jy
! Total flux subtracted in 200 components = -0.0270184 Jy
! Clean residual min=-0.015279 max=0.015165 Jy/beam
! Clean residual mean=-0.001184 rms=0.007462 Jy/beam
! Combined flux in latest and established models = 0.254275 Jy
! Performing phase self-cal
! Adding 183 model components to the UV plane model.
! The established model now contains 243 components and 0.254275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071307Jy  sigma=1.476354
! Fit after  self-cal, rms=0.071159Jy  sigma=1.471146
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 23.88 x 30.67 at 19.5 degrees (North through East)
! Clean map  min=-0.043011  max=0.20761 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.14     HN        1.00*    KP        1.14     LA        0.91     
!   NL        1.00*    PT        0.87     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.09     HN        1.00*    KP        1.09     LA        0.90     
!   NL        1.00*    PT        0.89     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    OV        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.96     HN        1.00*    KP        1.10     LA        0.95     
!   NL        1.00*    PT        0.86     
! 
! 
! Fit before self-cal, rms=0.071159Jy  sigma=1.471146
! Fit after  self-cal, rms=0.059323Jy  sigma=1.286454
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=24.51 mas, bmaj=30.76 mas, bpa=22.05 degrees
! Estimated noise=0.839888 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296972 Jy
! Component: 100  -  total flux cleaned = 0.00331985 Jy
! Component: 150  -  total flux cleaned = 0.00199017 Jy
! Component: 200  -  total flux cleaned = 4.8424e-05 Jy
! Total flux subtracted in 200 components = 4.8424e-05 Jy
! Clean residual min=-0.002635 max=0.002637 Jy/beam
! Clean residual mean=-0.000276 rms=0.001476 Jy/beam
! Combined flux in latest and established models = 0.254323 Jy
! Performing phase self-cal
! Adding 139 model components to the UV plane model.
! The established model now contains 382 components and 0.254323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056446Jy  sigma=1.229826
! Fit after  self-cal, rms=0.056406Jy  sigma=1.228718
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056406Jy  sigma=1.228718
! Fit after  self-cal, rms=0.054326Jy  sigma=1.170076
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.49 mas, bmaj=30.81 mas, bpa=22.48 degrees
! Estimated noise=0.835001 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000963497 Jy
! Component: 100  -  total flux cleaned = 3.80544e-05 Jy
! Component: 150  -  total flux cleaned = -0.00145206 Jy
! Component: 200  -  total flux cleaned = -0.00301512 Jy
! Total flux subtracted in 200 components = -0.00301512 Jy
! Clean residual min=-0.001368 max=0.001357 Jy/beam
! Clean residual mean=-0.000161 rms=0.000825 Jy/beam
! Combined flux in latest and established models = 0.251308 Jy
selfcal
! Performing phase self-cal
! Adding 134 model components to the UV plane model.
! The established model now contains 516 components and 0.251308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053776Jy  sigma=1.161888
! Fit after  self-cal, rms=0.053755Jy  sigma=1.161595
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118103 Jy
! Component: 100  -  total flux cleaned = -0.00269291 Jy
! Component: 150  -  total flux cleaned = -0.00409928 Jy
! Component: 200  -  total flux cleaned = -0.0053074 Jy
! Total flux subtracted in 200 components = -0.0053074 Jy
! Clean residual min=-0.000869 max=0.000856 Jy/beam
! Clean residual mean=-0.000100 rms=0.000508 Jy/beam
! Combined flux in latest and established models = 0.246 Jy
! Performing phase self-cal
! Adding 127 model components to the UV plane model.
! The established model now contains 640 components and 0.246 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053563Jy  sigma=1.159351
! Fit after  self-cal, rms=0.053558Jy  sigma=1.159316
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053558Jy  sigma=1.159316
! Fit after  self-cal, rms=0.051810Jy  sigma=1.124244
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.53 mas, bmaj=30.81 mas, bpa=22.67 degrees
! Estimated noise=0.836751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000407782 Jy
! Component: 100  -  total flux cleaned = -0.000718834 Jy
! Component: 150  -  total flux cleaned = -0.00105849 Jy
! Component: 200  -  total flux cleaned = -0.00133007 Jy
! Total flux subtracted in 200 components = -0.00133007 Jy
! Clean residual min=-0.000401 max=0.000394 Jy/beam
! Clean residual mean=-0.000005 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.24467 Jy
selfcal
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 733 components and 0.24467 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051777Jy  sigma=1.123802
! Fit after  self-cal, rms=0.051778Jy  sigma=1.123614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000229948 Jy
! Component: 100  -  total flux cleaned = -0.000324802 Jy
! Component: 150  -  total flux cleaned = -0.000469661 Jy
! Component: 200  -  total flux cleaned = -0.000522519 Jy
! Total flux subtracted in 200 components = -0.000522519 Jy
! Clean residual min=-0.000289 max=0.000290 Jy/beam
! Clean residual mean=-0.000001 rms=0.000116 Jy/beam
! Combined flux in latest and established models = 0.244148 Jy
! Performing phase self-cal
! Adding 91 model components to the UV plane model.
! The established model now contains 813 components and 0.244148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051764Jy  sigma=1.123415
! Fit after  self-cal, rms=0.051761Jy  sigma=1.123408
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051761Jy  sigma=1.123408
! Fit after  self-cal, rms=0.051822Jy  sigma=1.123364
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.77 mas, bmaj=30.88 mas, bpa=22.89 degrees
! Estimated noise=0.836788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000362931 Jy
! Component: 100  -  total flux cleaned = -0.000502791 Jy
! Component: 150  -  total flux cleaned = -0.000639031 Jy
! Component: 200  -  total flux cleaned = -0.0007401 Jy
! Total flux subtracted in 200 components = -0.0007401 Jy
! Clean residual min=-0.000279 max=0.000276 Jy/beam
! Clean residual mean=-0.000002 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.243408 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 877 components and 0.243408 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051809Jy  sigma=1.123191
! Fit after  self-cal, rms=0.051807Jy  sigma=1.123188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.12663e-05 Jy
! Component: 100  -  total flux cleaned = -0.000142139 Jy
! Component: 150  -  total flux cleaned = -0.000157041 Jy
! Component: 200  -  total flux cleaned = -0.000186853 Jy
! Total flux subtracted in 200 components = -0.000186853 Jy
! Clean residual min=-0.000246 max=0.000245 Jy/beam
! Clean residual mean=0.000001 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 0.243221 Jy
! Performing phase self-cal
! Adding 84 model components to the UV plane model.
! The established model now contains 944 components and 0.243221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051798Jy  sigma=1.123043
! Fit after  self-cal, rms=0.051797Jy  sigma=1.123041
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=30.81 mas, bpa=22.64 degrees
! Estimated noise=0.837189 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 24.54 x 30.81 at 22.64 degrees (North through East)
! Clean map  min=-0.030465  max=0.19625 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=23.27 mas, bmaj=33.66 mas, bpa=15.46 degrees
! Estimated noise=1.02916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.190181 Jy
! Component: 100  -  total flux cleaned = 0.2708 Jy
! Component: 150  -  total flux cleaned = 0.294774 Jy
! Component: 200  -  total flux cleaned = 0.285822 Jy
! Total flux subtracted in 200 components = 0.285822 Jy
! Clean residual min=-0.021352 max=0.021146 Jy/beam
! Clean residual mean=-0.001872 rms=0.010387 Jy/beam
! Combined flux in latest and established models = 0.285822 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 141 model components to the UV plane model.
! The established model now contains 141 components and 0.285822 Jy
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=30.81 mas, bpa=22.64 degrees
! Estimated noise=0.837189 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0084507 Jy
! Component: 100  -  total flux cleaned = -0.0148805 Jy
! Component: 150  -  total flux cleaned = -0.019249 Jy
! Component: 200  -  total flux cleaned = -0.0244883 Jy
! Total flux subtracted in 200 components = -0.0244883 Jy
! Clean residual min=-0.006454 max=0.006413 Jy/beam
! Clean residual mean=-0.000464 rms=0.003090 Jy/beam
! Combined flux in latest and established models = 0.261334 Jy
! Adding 160 model components to the UV plane model.
! The established model now contains 300 components and 0.261334 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=24.77 mas, bmaj=30.88 mas, bpa=22.89 degrees
! Estimated noise=0.836788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0059572 Jy
! Component: 100  -  total flux cleaned = -0.0117771 Jy
! Component: 150  -  total flux cleaned = -0.0172892 Jy
! Component: 200  -  total flux cleaned = -0.0213344 Jy
! Total flux subtracted in 200 components = -0.0213344 Jy
! Clean residual min=-0.003069 max=0.003047 Jy/beam
! Clean residual mean=-0.000224 rms=0.001479 Jy/beam
! Combined flux in latest and established models = 0.239999 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00224925 Jy
! Component: 100  -  total flux cleaned = -0.00378753 Jy
! Component: 150  -  total flux cleaned = -0.00492115 Jy
! Component: 200  -  total flux cleaned = -0.00583696 Jy
! Total flux subtracted in 200 components = -0.00583696 Jy
! Clean residual min=-0.002147 max=0.002102 Jy/beam
! Clean residual mean=-0.000070 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.234162 Jy
! Adding 201 model components to the UV plane model.
! The established model now contains 490 components and 0.234162 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=24.54 mas, bmaj=30.81 mas, bpa=22.64 degrees
! Estimated noise=0.837189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000316585 Jy
! Component: 100  -  total flux cleaned = -0.00139605 Jy
! Component: 150  -  total flux cleaned = -0.00208017 Jy
! Component: 200  -  total flux cleaned = -0.00269156 Jy
! Total flux subtracted in 200 components = -0.00269156 Jy
! Clean residual min=-0.000780 max=0.000786 Jy/beam
! Clean residual mean=-0.000051 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.231471 Jy
selfcal
! Performing phase self-cal
! Adding 141 model components to the UV plane model.
! The established model now contains 628 components and 0.231471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051918Jy  sigma=1.126021
! Fit after  self-cal, rms=0.051899Jy  sigma=1.125747
wmodel /J0643+0857_S_map.mod
! wmodel: Unable to open new model file: /J0643+0857_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0643+0857_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 24.54 x 30.81 at 22.64 degrees (North through East)
! Clean map  min=-0.026235  max=0.18747 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0643+0857_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.187474 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000370868 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.593472 0.593472 1.18694 2.37389 4.74777 9.49555 18.9911 37.9822 75.9644
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.187 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  505.5 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0643+0857_S_dfm.log closed on Thu May 19 23:07:41 2016