! Started logfile: /scr/pima/bg219i_uvs/J0627+0324_X_dfm.log on Thu May 19 23:07:25 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0627+0324_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0627+0324_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.776628 visibilities/baseline/integration-bin.
! Found source: J0627+0324
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24324 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0627+0324_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.007949Jy  sigma=23.803132
! Fit after  self-cal, rms=0.890990Jy  sigma=20.958709
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.73 mas, bmaj=1.851 mas, bpa=-9.536 degrees
! Estimated noise=0.355912 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0781005 Jy
! Component: 100  -  total flux cleaned = 0.109172 Jy
! Total flux subtracted in 100 components = 0.109172 Jy
! Clean residual min=-0.006039 max=0.014058 Jy/beam
! Clean residual mean=-0.000004 rms=0.001799 Jy/beam
! Combined flux in latest and established models = 0.109172 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.109172 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074950Jy  sigma=1.626477
! Fit after  self-cal, rms=0.074025Jy  sigma=1.604126
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0186988 Jy
! Component: 100  -  total flux cleaned = 0.0283049 Jy
! Total flux subtracted in 100 components = 0.0283049 Jy
! Clean residual min=-0.005028 max=0.010759 Jy/beam
! Clean residual mean=-0.000001 rms=0.001189 Jy/beam
! Combined flux in latest and established models = 0.137477 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.137477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068633Jy  sigma=1.442037
! Fit after  self-cal, rms=0.068562Jy  sigma=1.440663
! Inverting map 
! Added new window around map position (-2.2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00960525 Jy
! Component: 100  -  total flux cleaned = 0.0151051 Jy
! Total flux subtracted in 100 components = 0.0151051 Jy
! Clean residual min=-0.004309 max=0.004330 Jy/beam
! Clean residual mean=-0.000000 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.152582 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 23 components and 0.152582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067132Jy  sigma=1.394109
! Fit after  self-cal, rms=0.067015Jy  sigma=1.391214
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9449 mas, bmaj=2.294 mas, bpa=-10.81 degrees
! Estimated noise=0.202161 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055615 Jy
! Component: 100  -  total flux cleaned = 0.0086418 Jy
! Component: 150  -  total flux cleaned = 0.00967749 Jy
! Component: 200  -  total flux cleaned = 0.00996137 Jy
! Total flux subtracted in 200 components = 0.00996137 Jy
! Clean residual min=-0.002734 max=0.003994 Jy/beam
! Clean residual mean=0.000003 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.162543 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 34 components and 0.162543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066641Jy  sigma=1.376043
! Fit after  self-cal, rms=0.066596Jy  sigma=1.374948
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9449 x 2.294 at -10.81 degrees (North through East)
! Clean map  min=-0.0026953  max=0.10689 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.13     KP        0.99     
!   LA        0.96     MK        1.02     NL        0.97     OV        0.98     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.15     KP        0.96     
!   LA        0.98     MK        0.97     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.84     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.14     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.02     OV        0.94     
!   PT        0.95     SC        0.84     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.17     KP        0.99     
!   LA        0.95     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.96     SC        0.86     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.17     KP        1.01     
!   LA        0.96     MK        1.01     NL        0.98     OV        0.97     
!   PT        0.95     SC        0.84     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.03     HN        1.18     KP        1.01     
!   LA        0.98     MK        1.03     NL        0.95     OV        0.97     
!   PT        0.99     SC        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.12     KP        1.01     
!   LA        0.98     MK        0.95     NL        0.97     OV        0.98     
!   PT        1.00     SC        0.83     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.16     KP        1.01     
!   LA        0.99     MK        0.96     NL        0.97     OV        0.97     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.18     KP        1.01     
!   LA        0.98     MK        0.97     NL        0.98     OV        0.97     
!   PT        1.01     SC        0.87     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.11     KP        0.99     
!   LA        0.95     MK        1.05     NL        1.00     OV        0.97     
!   PT        1.01     SC        0.90     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.18     KP        0.99     
!   LA        0.96     MK        1.04     NL        0.99     OV        0.99     
!   PT        0.96     SC        0.84     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.066596Jy  sigma=1.374948
! Fit after  self-cal, rms=0.068735Jy  sigma=1.364834
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9451 mas, bmaj=2.248 mas, bpa=-9.774 degrees
! Estimated noise=0.200432 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017775 Jy
! Component: 100  -  total flux cleaned = 0.000235624 Jy
! Component: 150  -  total flux cleaned = 0.000330539 Jy
! Component: 200  -  total flux cleaned = 0.000330499 Jy
! Total flux subtracted in 200 components = 0.000330499 Jy
! Clean residual min=-0.002162 max=0.002568 Jy/beam
! Clean residual mean=0.000002 rms=0.000564 Jy/beam
! Combined flux in latest and established models = 0.162874 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 43 components and 0.162874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068634Jy  sigma=1.362369
! Fit after  self-cal, rms=0.068714Jy  sigma=1.362042
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068714Jy  sigma=1.362042
! Fit after  self-cal, rms=0.068587Jy  sigma=1.356688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9403 mas, bmaj=2.244 mas, bpa=-9.695 degrees
! Estimated noise=0.196914 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129121 Jy
! Component: 100  -  total flux cleaned = -0.00115746 Jy
! Component: 150  -  total flux cleaned = -0.00107791 Jy
! Component: 200  -  total flux cleaned = -0.000972847 Jy
! Total flux subtracted in 200 components = -0.000972847 Jy
! Clean residual min=-0.001713 max=0.002341 Jy/beam
! Clean residual mean=0.000001 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.161901 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 45 components and 0.161901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068503Jy  sigma=1.354740
! Fit after  self-cal, rms=0.068508Jy  sigma=1.354624
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.4, 2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202887 Jy
! Component: 100  -  total flux cleaned = 0.00247799 Jy
! Component: 150  -  total flux cleaned = 0.00255326 Jy
! Component: 200  -  total flux cleaned = 0.00269238 Jy
! Total flux subtracted in 200 components = 0.00269238 Jy
! Clean residual min=-0.001544 max=0.001565 Jy/beam
! Clean residual mean=0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.164593 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 0.164593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068406Jy  sigma=1.352694
! Fit after  self-cal, rms=0.068401Jy  sigma=1.352427
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068401Jy  sigma=1.352427
! Fit after  self-cal, rms=0.068714Jy  sigma=1.351049
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9365 mas, bmaj=2.24 mas, bpa=-9.624 degrees
! Estimated noise=0.194905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176352 Jy
! Component: 100  -  total flux cleaned = 0.000306546 Jy
! Component: 150  -  total flux cleaned = 0.000460166 Jy
! Component: 200  -  total flux cleaned = 0.000545324 Jy
! Total flux subtracted in 200 components = 0.000545324 Jy
! Clean residual min=-0.001478 max=0.001212 Jy/beam
! Clean residual mean=0.000001 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.165139 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 83 components and 0.165139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068664Jy  sigma=1.350091
! Fit after  self-cal, rms=0.068675Jy  sigma=1.350009
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000424442 Jy
! Component: 100  -  total flux cleaned = 0.000504497 Jy
! Component: 150  -  total flux cleaned = 0.000603268 Jy
! Component: 200  -  total flux cleaned = 0.000650773 Jy
! Total flux subtracted in 200 components = 0.000650773 Jy
! Clean residual min=-0.001456 max=0.001201 Jy/beam
! Clean residual mean=0.000001 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.165789 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 87 components and 0.165789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068655Jy  sigma=1.349535
! Fit after  self-cal, rms=0.068655Jy  sigma=1.349511
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068655Jy  sigma=1.349511
! Fit after  self-cal, rms=0.068112Jy  sigma=1.349286
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.355 mas, bmaj=3.264 mas, bpa=-0.4404 degrees
! Estimated noise=0.242422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346086 Jy
! Component: 100  -  total flux cleaned = 0.000634156 Jy
! Component: 150  -  total flux cleaned = 0.000861221 Jy
! Component: 200  -  total flux cleaned = 0.000929714 Jy
! Total flux subtracted in 200 components = 0.000929714 Jy
! Clean residual min=-0.001253 max=0.001288 Jy/beam
! Clean residual mean=0.000001 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.166719 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 107 components and 0.166719 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068095Jy  sigma=1.349233
! Fit after  self-cal, rms=0.068094Jy  sigma=1.349187
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176366 Jy
! Component: 100  -  total flux cleaned = 0.00022689 Jy
! Component: 150  -  total flux cleaned = 0.000272609 Jy
! Component: 200  -  total flux cleaned = 0.000300323 Jy
! Total flux subtracted in 200 components = 0.000300323 Jy
! Clean residual min=-0.001221 max=0.001291 Jy/beam
! Clean residual mean=0.000001 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.167019 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 119 components and 0.167019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068088Jy  sigma=1.349177
! Fit after  self-cal, rms=0.068089Jy  sigma=1.349156
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.238 mas, bpa=-9.592 degrees
! Estimated noise=0.193518 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9354 x 2.238 at -9.592 degrees (North through East)
! Clean map  min=-0.0013084  max=0.10097 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7236 mas, bmaj=1.801 mas, bpa=-8.059 degrees
! Estimated noise=0.337046 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0760362 Jy
! Component: 100  -  total flux cleaned = 0.10869 Jy
! Component: 150  -  total flux cleaned = 0.125449 Jy
! Component: 200  -  total flux cleaned = 0.135675 Jy
! Total flux subtracted in 200 components = 0.135675 Jy
! Clean residual min=-0.003587 max=0.005403 Jy/beam
! Clean residual mean=-0.000001 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.135675 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.135675 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.238 mas, bpa=-9.592 degrees
! Estimated noise=0.193518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00988899 Jy
! Component: 100  -  total flux cleaned = 0.0157088 Jy
! Component: 150  -  total flux cleaned = 0.0196734 Jy
! Component: 200  -  total flux cleaned = 0.0224773 Jy
! Total flux subtracted in 200 components = 0.0224773 Jy
! Clean residual min=-0.001634 max=0.001918 Jy/beam
! Clean residual mean=0.000002 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.158152 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 44 components and 0.158152 Jy
! Inverting map 
! Added new window around map position (-4.2, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00218671 Jy
! Component: 100  -  total flux cleaned = 0.00387738 Jy
! Component: 150  -  total flux cleaned = 0.00523468 Jy
! Component: 200  -  total flux cleaned = 0.00634207 Jy
! Total flux subtracted in 200 components = 0.00634207 Jy
! Clean residual min=-0.001482 max=0.001269 Jy/beam
! Clean residual mean=0.000001 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.164494 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 0.164494 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.355 mas, bmaj=3.264 mas, bpa=-0.4404 degrees
! Estimated noise=0.242422 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127584 Jy
! Component: 100  -  total flux cleaned = 0.00176764 Jy
! Component: 150  -  total flux cleaned = 0.00212037 Jy
! Component: 200  -  total flux cleaned = 0.00223389 Jy
! Total flux subtracted in 200 components = 0.00223389 Jy
! Clean residual min=-0.001345 max=0.001333 Jy/beam
! Clean residual mean=0.000001 rms=0.000380 Jy/beam
! Combined flux in latest and established models = 0.166728 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.00944e-05 Jy
! Component: 100  -  total flux cleaned = 5.82793e-05 Jy
! Component: 150  -  total flux cleaned = 9.15003e-05 Jy
! Component: 200  -  total flux cleaned = 0.000122699 Jy
! Total flux subtracted in 200 components = 0.000122699 Jy
! Clean residual min=-0.001293 max=0.001342 Jy/beam
! Clean residual mean=0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.166851 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 119 components and 0.166851 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9354 mas, bmaj=2.238 mas, bpa=-9.592 degrees
! Estimated noise=0.193518 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000254487 Jy
! Component: 100  -  total flux cleaned = -0.000175368 Jy
! Component: 150  -  total flux cleaned = -0.000175701 Jy
! Component: 200  -  total flux cleaned = -0.000153751 Jy
! Total flux subtracted in 200 components = -0.000153751 Jy
! Clean residual min=-0.001430 max=0.001279 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.166697 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 135 components and 0.166697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068059Jy  sigma=1.348352
! Fit after  self-cal, rms=0.068050Jy  sigma=1.348030
wmodel /J0627+0324_X_map.mod
! wmodel: Unable to open new model file: /J0627+0324_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0627+0324_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9354 x 2.238 at -9.592 degrees (North through East)
! Clean map  min=-0.0012767  max=0.10043 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0627+0324_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.100431 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00029113 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.869644 0.869644 1.73929 3.47858 6.95716 13.9143 27.8286 55.6572
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.1 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  344.968 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0627+0324_X_dfm.log closed on Thu May 19 23:07:28 2016