! Started logfile: /scr/pima/bg219i_uvs/J0624-0103_S_uvs.log on Wed Apr 6 22:54:46 2016 obs /scr/pima/bg219i_uvs/J0624-0103_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J0624-0103_S_uva.fits ! AN table 1: 60 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.988889 visibilities/baseline/integration-bin. ! Found source: J0624-0103 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 10680 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0624-0103_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 40 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999713Jy sigma=21.571013 ! Fit after self-cal, rms=0.925847Jy sigma=19.974712 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.719 mas, bmaj=6.581 mas, bpa=-4.691 degrees ! Estimated noise=0.440042 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0568372 Jy ! Component: 100 - total flux cleaned = 0.0721572 Jy ! Total flux subtracted in 100 components = 0.0721572 Jy ! Clean residual min=-0.005486 max=0.012756 Jy/beam ! Clean residual mean=0.000004 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.0721572 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0721572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074112Jy sigma=1.434388 ! Fit after self-cal, rms=0.073812Jy sigma=1.430269 ! Inverting map ! Added new window around map position (-2.5, -9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126054 Jy ! Component: 100 - total flux cleaned = 0.0200548 Jy ! Total flux subtracted in 100 components = 0.0200548 Jy ! Clean residual min=-0.004125 max=0.005174 Jy/beam ! Clean residual mean=0.000004 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.0922119 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 21 components and 0.0922119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071092Jy sigma=1.373916 ! Fit after self-cal, rms=0.070950Jy sigma=1.370260 ! Inverting map ! Added new window around map position (-5.5, -14.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0062367 Jy ! Component: 100 - total flux cleaned = 0.0102646 Jy ! Total flux subtracted in 100 components = 0.0102646 Jy ! Clean residual min=-0.002946 max=0.002854 Jy/beam ! Clean residual mean=0.000003 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.102477 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 33 components and 0.102476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070215Jy sigma=1.355952 ! Fit after self-cal, rms=0.070183Jy sigma=1.355276 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.269 mas, bmaj=7.566 mas, bpa=-5.294 degrees ! Estimated noise=0.337443 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040596 Jy ! Component: 100 - total flux cleaned = 0.0067918 Jy ! Component: 150 - total flux cleaned = 0.00877942 Jy ! Component: 200 - total flux cleaned = 0.0102595 Jy ! Total flux subtracted in 200 components = 0.0102595 Jy ! Clean residual min=-0.002627 max=0.002104 Jy/beam ! Clean residual mean=0.000001 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.112736 Jy ! Performing phase self-cal ! Adding 65 model components to the UV plane model. ! The established model now contains 86 components and 0.112736 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069831Jy sigma=1.349313 ! Fit after self-cal, rms=0.069801Jy sigma=1.348935 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.269 x 7.566 at -5.294 degrees (North through East) ! Clean map min=-0.0024117 max=0.073725 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.06 KP 1.02 ! LA 1.01 MK 1.06 NL 0.97 OV 1.00 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.05 HN 1.01 KP 1.02 ! LA 0.99 MK 1.04 NL 1.04 OV 1.00 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 1.03 KP 1.06 ! LA 1.00 MK 0.99 NL 1.02 OV 0.96 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.85 HN 0.99 KP 1.05 ! LA 0.98 MK 0.98 NL 1.01 OV 0.89 ! PT 0.93 SC 1.05 ! ! ! Fit before self-cal, rms=0.069801Jy sigma=1.348935 ! Fit after self-cal, rms=0.068174Jy sigma=1.343821 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.623 mas, bpa=-5.255 degrees ! Estimated noise=0.33598 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000623025 Jy ! Component: 100 - total flux cleaned = 0.000582415 Jy ! Component: 150 - total flux cleaned = 0.000516278 Jy ! Component: 200 - total flux cleaned = 0.00053111 Jy ! Total flux subtracted in 200 components = 0.00053111 Jy ! Clean residual min=-0.001942 max=0.002033 Jy/beam ! Clean residual mean=0.000002 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.113267 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.113267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068161Jy sigma=1.343543 ! Fit after self-cal, rms=0.068177Jy sigma=1.343368 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068177Jy sigma=1.343368 ! Fit after self-cal, rms=0.068675Jy sigma=1.341042 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.614 mas, bpa=-5.199 degrees ! Estimated noise=0.336931 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000595398 Jy ! Component: 100 - total flux cleaned = 0.000862064 Jy ! Component: 150 - total flux cleaned = 0.000930262 Jy ! Component: 200 - total flux cleaned = 0.000950594 Jy ! Total flux subtracted in 200 components = 0.000950594 Jy ! Clean residual min=-0.001875 max=0.001903 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.114218 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.114218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068666Jy sigma=1.340934 ! Fit after self-cal, rms=0.068673Jy sigma=1.340854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.16185e-05 Jy ! Component: 100 - total flux cleaned = 6.26419e-05 Jy ! Component: 150 - total flux cleaned = 7.23351e-05 Jy ! Component: 200 - total flux cleaned = 8.13316e-05 Jy ! Total flux subtracted in 200 components = 8.13316e-05 Jy ! Clean residual min=-0.001872 max=0.001896 Jy/beam ! Clean residual mean=0.000004 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.114299 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 112 components and 0.114299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068670Jy sigma=1.340802 ! Fit after self-cal, rms=0.068670Jy sigma=1.340796 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068670Jy sigma=1.340796 ! Fit after self-cal, rms=0.069048Jy sigma=1.340778 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.282 mas, bmaj=7.604 mas, bpa=-5.132 degrees ! Estimated noise=0.338796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000558251 Jy ! Component: 100 - total flux cleaned = 0.000868243 Jy ! Component: 150 - total flux cleaned = 0.000936035 Jy ! Component: 200 - total flux cleaned = 0.000953979 Jy ! Total flux subtracted in 200 components = 0.000953979 Jy ! Clean residual min=-0.001879 max=0.001903 Jy/beam ! Clean residual mean=0.000004 rms=0.000475 Jy/beam ! Combined flux in latest and established models = 0.115253 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 121 components and 0.115253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069041Jy sigma=1.340697 ! Fit after self-cal, rms=0.069041Jy sigma=1.340694 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.03253e-05 Jy ! Component: 100 - total flux cleaned = 1.92979e-05 Jy ! Component: 150 - total flux cleaned = 1.08799e-05 Jy ! Component: 200 - total flux cleaned = 1.93039e-05 Jy ! Total flux subtracted in 200 components = 1.93039e-05 Jy ! Clean residual min=-0.001878 max=0.001895 Jy/beam ! Clean residual mean=0.000004 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.115272 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 125 components and 0.115272 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069039Jy sigma=1.340654 ! Fit after self-cal, rms=0.069039Jy sigma=1.340650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069039Jy sigma=1.340650 ! Fit after self-cal, rms=0.069346Jy sigma=1.340624 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=11.83 mas, bpa=-1.28 degrees ! Estimated noise=0.446946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000893156 Jy ! Component: 100 - total flux cleaned = 0.000981654 Jy ! Component: 150 - total flux cleaned = 0.001032 Jy ! Component: 200 - total flux cleaned = 0.00103213 Jy ! Total flux subtracted in 200 components = 0.00103213 Jy ! Clean residual min=-0.002108 max=0.002751 Jy/beam ! Clean residual mean=0.000008 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.116304 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 137 components and 0.116304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069349Jy sigma=1.340789 ! Fit after self-cal, rms=0.069343Jy sigma=1.340731 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153136 Jy ! Component: 100 - total flux cleaned = 0.00018026 Jy ! Component: 150 - total flux cleaned = 0.000180043 Jy ! Component: 200 - total flux cleaned = 0.000180207 Jy ! Total flux subtracted in 200 components = 0.000180207 Jy ! Clean residual min=-0.002120 max=0.002773 Jy/beam ! Clean residual mean=0.000008 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.116485 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 140 components and 0.116485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069349Jy sigma=1.340902 ! Fit after self-cal, rms=0.069349Jy sigma=1.340887 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.596 mas, bpa=-5.082 degrees ! Estimated noise=0.340616 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.596 at -5.082 degrees (North through East) ! Clean map min=-0.0019614 max=0.073563 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.727 mas, bmaj=6.609 mas, bpa=-4.529 degrees ! Estimated noise=0.442645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569562 Jy ! Component: 100 - total flux cleaned = 0.0754274 Jy ! Component: 150 - total flux cleaned = 0.0869691 Jy ! Component: 200 - total flux cleaned = 0.094631 Jy ! Total flux subtracted in 200 components = 0.094631 Jy ! Clean residual min=-0.002779 max=0.004107 Jy/beam ! Clean residual mean=0.000004 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.094631 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.094631 Jy ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.596 mas, bpa=-5.082 degrees ! Estimated noise=0.340616 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665984 Jy ! Component: 100 - total flux cleaned = 0.0110561 Jy ! Component: 150 - total flux cleaned = 0.0141476 Jy ! Component: 200 - total flux cleaned = 0.0163635 Jy ! Total flux subtracted in 200 components = 0.0163635 Jy ! Clean residual min=-0.002038 max=0.002248 Jy/beam ! Clean residual mean=0.000003 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.110995 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 69 components and 0.110995 Jy ! Inverting map ! Added new window around map position (-10.5, -20.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227089 Jy ! Component: 100 - total flux cleaned = 0.00370169 Jy ! Component: 150 - total flux cleaned = 0.00481801 Jy ! Component: 200 - total flux cleaned = 0.00539404 Jy ! Total flux subtracted in 200 components = 0.00539404 Jy ! Clean residual min=-0.002006 max=0.001739 Jy/beam ! Clean residual mean=0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.116389 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 99 components and 0.116389 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.461 mas, bmaj=11.83 mas, bpa=-1.28 degrees ! Estimated noise=0.446946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116489 Jy ! Component: 100 - total flux cleaned = 0.0012537 Jy ! Component: 150 - total flux cleaned = 0.0013453 Jy ! Component: 200 - total flux cleaned = 0.0014026 Jy ! Total flux subtracted in 200 components = 0.0014026 Jy ! Clean residual min=-0.002061 max=0.002533 Jy/beam ! Clean residual mean=0.000011 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.117791 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.41447e-05 Jy ! Component: 100 - total flux cleaned = 0.000118945 Jy ! Component: 150 - total flux cleaned = 0.000167477 Jy ! Component: 200 - total flux cleaned = 0.000200044 Jy ! Total flux subtracted in 200 components = 0.000200044 Jy ! Clean residual min=-0.002040 max=0.002523 Jy/beam ! Clean residual mean=0.000011 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.117991 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 161 components and 0.117991 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.279 mas, bmaj=7.596 mas, bpa=-5.082 degrees ! Estimated noise=0.340616 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.99855e-05 Jy ! Component: 100 - total flux cleaned = 7.21494e-05 Jy ! Component: 150 - total flux cleaned = 0.000104532 Jy ! Component: 200 - total flux cleaned = 0.000104692 Jy ! Total flux subtracted in 200 components = 0.000104692 Jy ! Clean residual min=-0.002016 max=0.001786 Jy/beam ! Clean residual mean=0.000005 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.118096 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 174 components and 0.118096 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069283Jy sigma=1.339610 ! Fit after self-cal, rms=0.069262Jy sigma=1.339336 wmodel /scr/pima/bg219i_uvs/J0624-0103_S_map.mod ! Writing 174 model components to file: /scr/pima/bg219i_uvs/J0624-0103_S_map.mod wobs /scr/pima/bg219i_uvs/J0624-0103_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J0624-0103_S_uvs.fits wwins /scr/pima/bg219i_uvs/J0624-0103_S_map.win ! wwins: Wrote 4 windows to /scr/pima/bg219i_uvs/J0624-0103_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0002125 Jy ! Component: 100 - total flux cleaned = 0.000118472 Jy ! Component: 150 - total flux cleaned = 0.00026169 Jy ! Component: 200 - total flux cleaned = 0.00037183 Jy ! Component: 250 - total flux cleaned = 0.000503239 Jy ! Component: 300 - total flux cleaned = 0.000604279 Jy ! Component: 350 - total flux cleaned = 0.000677968 Jy ! Component: 400 - total flux cleaned = 0.00070158 Jy ! Component: 450 - total flux cleaned = 0.000654853 Jy ! Component: 500 - total flux cleaned = 0.000586496 Jy ! Component: 550 - total flux cleaned = 0.0004759 Jy ! Component: 600 - total flux cleaned = 0.000432886 Jy ! Component: 650 - total flux cleaned = 0.000369366 Jy ! Component: 700 - total flux cleaned = 0.000327483 Jy ! Component: 750 - total flux cleaned = 0.000265475 Jy ! Component: 800 - total flux cleaned = 0.000205092 Jy ! Component: 850 - total flux cleaned = 0.000165679 Jy ! Component: 900 - total flux cleaned = 0.000146655 Jy ! Component: 950 - total flux cleaned = 0.000108654 Jy ! Component: 1000 - total flux cleaned = 0.000127599 Jy ! Component: 1050 - total flux cleaned = 0.000108889 Jy ! Component: 1100 - total flux cleaned = 7.24699e-05 Jy ! Component: 1150 - total flux cleaned = 7.23298e-05 Jy ! Component: 1200 - total flux cleaned = 8.96843e-05 Jy ! Component: 1250 - total flux cleaned = 1.41364e-06 Jy ! Component: 1300 - total flux cleaned = -8.51081e-05 Jy ! Component: 1350 - total flux cleaned = -8.49821e-05 Jy ! Component: 1400 - total flux cleaned = -0.00023693 Jy ! Component: 1450 - total flux cleaned = -0.000237145 Jy ! Component: 1500 - total flux cleaned = -0.000369366 Jy ! Component: 1550 - total flux cleaned = -0.000401879 Jy ! Component: 1600 - total flux cleaned = -0.000434309 Jy ! Component: 1650 - total flux cleaned = -0.000466333 Jy ! Component: 1700 - total flux cleaned = -0.000545523 Jy ! Component: 1750 - total flux cleaned = -0.00056134 Jy ! Component: 1800 - total flux cleaned = -0.00056131 Jy ! Component: 1850 - total flux cleaned = -0.000561166 Jy ! Component: 1900 - total flux cleaned = -0.000622129 Jy ! Component: 1950 - total flux cleaned = -0.000607115 Jy ! Component: 2000 - total flux cleaned = -0.000637206 Jy ! Component: 2050 - total flux cleaned = -0.00062221 Jy ! Component: 2100 - total flux cleaned = -0.000592894 Jy ! Component: 2150 - total flux cleaned = -0.000593052 Jy ! Component: 2200 - total flux cleaned = -0.000665443 Jy ! Component: 2250 - total flux cleaned = -0.000622282 Jy ! Component: 2300 - total flux cleaned = -0.000622283 Jy ! Component: 2350 - total flux cleaned = -0.000608104 Jy ! Component: 2400 - total flux cleaned = -0.000580228 Jy ! Component: 2450 - total flux cleaned = -0.000566244 Jy ! Component: 2500 - total flux cleaned = -0.000621306 Jy ! Component: 2550 - total flux cleaned = -0.000511994 Jy ! Component: 2600 - total flux cleaned = -0.000525738 Jy ! Component: 2650 - total flux cleaned = -0.000566062 Jy ! Component: 2700 - total flux cleaned = -0.000526038 Jy ! Component: 2750 - total flux cleaned = -0.000459999 Jy ! Component: 2800 - total flux cleaned = -0.000486092 Jy ! Component: 2850 - total flux cleaned = -0.000394896 Jy ! Component: 2900 - total flux cleaned = -0.000407753 Jy ! Component: 2950 - total flux cleaned = -0.000343723 Jy ! Component: 3000 - total flux cleaned = -0.000318419 Jy ! Component: 3050 - total flux cleaned = -0.000267952 Jy ! Component: 3100 - total flux cleaned = -0.000268018 Jy ! Component: 3150 - total flux cleaned = -0.000218312 Jy ! Component: 3200 - total flux cleaned = -0.000205912 Jy ! Component: 3250 - total flux cleaned = -0.000169057 Jy ! Component: 3300 - total flux cleaned = -0.000181209 Jy ! Component: 3350 - total flux cleaned = -0.000120549 Jy ! Component: 3400 - total flux cleaned = -0.000120651 Jy ! Component: 3450 - total flux cleaned = -9.67241e-05 Jy ! Component: 3500 - total flux cleaned = -9.65697e-05 Jy ! Component: 3550 - total flux cleaned = -2.57261e-05 Jy ! Component: 3600 - total flux cleaned = -1.4081e-05 Jy ! Component: 3650 - total flux cleaned = -2.51465e-06 Jy ! Component: 3700 - total flux cleaned = 2.06279e-05 Jy ! Component: 3750 - total flux cleaned = 4.36165e-05 Jy ! Component: 3800 - total flux cleaned = 4.37253e-05 Jy ! Component: 3850 - total flux cleaned = 8.8957e-05 Jy ! Component: 3900 - total flux cleaned = 8.87603e-05 Jy ! Component: 3950 - total flux cleaned = 0.000167063 Jy ! Component: 4000 - total flux cleaned = 0.000166982 Jy ! Component: 4050 - total flux cleaned = 0.000189204 Jy ! Total flux subtracted in 4096 components = 0.000200074 Jy ! Clean residual min=-0.000640 max=0.000782 Jy/beam ! Clean residual mean=0.000002 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.118296 Jy keep ! Adding 320 model components to the UV plane model. ! The established model now contains 494 components and 0.118296 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J0624-0103_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.279 x 7.596 at -5.082 degrees (North through East) ! Clean map min=-0.0013866 max=0.073867 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0624-0103_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0738666 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000205346 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.833988 0.833988 1.66798 3.33595 6.67191 13.3438 26.6876 53.3752 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.073 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 359.717 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J0624-0103_S_uvs.log closed on Wed Apr 6 22:54:51 2016