! Started logfile: /scr/pima/bg219i_uvs/J0622-0109_X_dfm.log on Thu May 19 23:07:08 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0622-0109_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0622-0109_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.815595 visibilities/baseline/integration-bin.
! Found source: J0622-0109
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25104 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0622-0109_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003563Jy  sigma=22.932506
! Fit after  self-cal, rms=0.939366Jy  sigma=21.422006
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7055 mas, bmaj=1.736 mas, bpa=-5.743 degrees
! Estimated noise=0.357668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0444264 Jy
! Component: 100  -  total flux cleaned = 0.0575726 Jy
! Total flux subtracted in 100 components = 0.0575726 Jy
! Clean residual min=-0.005720 max=0.014196 Jy/beam
! Clean residual mean=-0.000000 rms=0.001388 Jy/beam
! Combined flux in latest and established models = 0.0575726 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0575726 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072647Jy  sigma=1.525878
! Fit after  self-cal, rms=0.071612Jy  sigma=1.502501
! Inverting map 
! Added new window around map position (0, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0143881 Jy
! Component: 100  -  total flux cleaned = 0.0220484 Jy
! Total flux subtracted in 100 components = 0.0220484 Jy
! Clean residual min=-0.004025 max=0.008469 Jy/beam
! Clean residual mean=0.000000 rms=0.000983 Jy/beam
! Combined flux in latest and established models = 0.079621 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 15 components and 0.079621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068374Jy  sigma=1.417862
! Fit after  self-cal, rms=0.067740Jy  sigma=1.403323
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848624 Jy
! Component: 100  -  total flux cleaned = 0.012553 Jy
! Total flux subtracted in 100 components = 0.012553 Jy
! Clean residual min=-0.003260 max=0.004603 Jy/beam
! Clean residual mean=0.000000 rms=0.000749 Jy/beam
! Combined flux in latest and established models = 0.0921741 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 16 components and 0.0921741 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066672Jy  sigma=1.375263
! Fit after  self-cal, rms=0.066452Jy  sigma=1.370230
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443251 Jy
! Component: 100  -  total flux cleaned = 0.00653098 Jy
! Total flux subtracted in 100 components = 0.00653098 Jy
! Clean residual min=-0.002696 max=0.002702 Jy/beam
! Clean residual mean=0.000000 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.098705 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 29 components and 0.098705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066191Jy  sigma=1.363206
! Fit after  self-cal, rms=0.066112Jy  sigma=1.361515
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8724 mas, bmaj=2.064 mas, bpa=-6.38 degrees
! Estimated noise=0.20437 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203035 Jy
! Component: 100  -  total flux cleaned = 0.00211976 Jy
! Component: 150  -  total flux cleaned = 0.00212178 Jy
! Component: 200  -  total flux cleaned = 0.00209108 Jy
! Total flux subtracted in 200 components = 0.00209108 Jy
! Clean residual min=-0.001978 max=0.002239 Jy/beam
! Clean residual mean=-0.000001 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.100796 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.100796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066032Jy  sigma=1.359427
! Fit after  self-cal, rms=0.066006Jy  sigma=1.358921
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8724 x 2.064 at -6.38 degrees (North through East)
! Clean map  min=-0.0016519  max=0.058416 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        0.97     KP        1.01     
!   LA        1.03     MK        1.02     NL        0.96     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.94     KP        0.98     
!   LA        1.04     MK        1.01     NL        0.97     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.95     KP        1.02     
!   LA        1.01     MK        0.98     NL        1.02     OV        0.95     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.07     HN        0.96     KP        1.00     
!   LA        1.00     MK        0.97     NL        0.98     OV        0.98     
!   PT        1.06     SC        1.08     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        0.96     KP        1.00     
!   LA        1.00     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.01     KP        1.05     
!   LA        1.03     MK        0.86     NL        0.98     OV        0.97     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.12     HN        0.92     KP        1.03     
!   LA        1.01     MK        0.94     NL        1.00     OV        0.97     
!   PT        0.96     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.94     HN        0.94     KP        1.01     
!   LA        1.06     MK        0.92     NL        1.00     OV        1.00     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        0.94     KP        1.05     
!   LA        1.05     MK        1.07     NL        0.99     OV        0.96     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        0.95     KP        1.03     
!   LA        1.04     MK        1.06     NL        1.00     OV        0.95     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.93     KP        1.04     
!   LA        1.02     MK        0.91     NL        1.02     OV        0.95     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        0.93     KP        1.02     
!   LA        1.01     MK        1.04     NL        1.02     OV        0.96     
!   PT        0.98     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.066006Jy  sigma=1.358921
! Fit after  self-cal, rms=0.065257Jy  sigma=1.356440
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.867 mas, bmaj=2.067 mas, bpa=-6.756 degrees
! Estimated noise=0.20223 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, -38.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197166 Jy
! Component: 100  -  total flux cleaned = 0.00288971 Jy
! Component: 150  -  total flux cleaned = 0.00343316 Jy
! Component: 200  -  total flux cleaned = 0.00375443 Jy
! Total flux subtracted in 200 components = 0.00375443 Jy
! Clean residual min=-0.001494 max=0.001744 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.104551 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 58 components and 0.104551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065191Jy  sigma=1.354460
! Fit after  self-cal, rms=0.065186Jy  sigma=1.354039
! Inverting map 
! Added new window around map position (-10.8, -16.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015287 Jy
! Component: 100  -  total flux cleaned = 0.00179075 Jy
! Component: 150  -  total flux cleaned = 0.00182083 Jy
! Component: 200  -  total flux cleaned = 0.00179431 Jy
! Total flux subtracted in 200 components = 0.00179431 Jy
! Clean residual min=-0.001359 max=0.001463 Jy/beam
! Clean residual mean=-0.000000 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.106345 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 76 components and 0.106345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065141Jy  sigma=1.352932
! Fit after  self-cal, rms=0.065129Jy  sigma=1.352800
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065129Jy  sigma=1.352800
! Fit after  self-cal, rms=0.065725Jy  sigma=1.350657
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.866 mas, bmaj=2.069 mas, bpa=-6.907 degrees
! Estimated noise=0.20223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000483738 Jy
! Component: 100  -  total flux cleaned = 0.000586026 Jy
! Component: 150  -  total flux cleaned = 0.000631158 Jy
! Component: 200  -  total flux cleaned = 0.000693248 Jy
! Total flux subtracted in 200 components = 0.000693248 Jy
! Clean residual min=-0.001349 max=0.001329 Jy/beam
! Clean residual mean=0.000000 rms=0.000289 Jy/beam
! Combined flux in latest and established models = 0.107038 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 86 components and 0.107038 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065708Jy  sigma=1.350223
! Fit after  self-cal, rms=0.065729Jy  sigma=1.350053
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011563 Jy
! Component: 100  -  total flux cleaned = 0.000136744 Jy
! Component: 150  -  total flux cleaned = 0.000136254 Jy
! Component: 200  -  total flux cleaned = 0.000188988 Jy
! Total flux subtracted in 200 components = 0.000188988 Jy
! Clean residual min=-0.001316 max=0.001287 Jy/beam
! Clean residual mean=0.000000 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.107227 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 95 components and 0.107227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065718Jy  sigma=1.349778
! Fit after  self-cal, rms=0.065716Jy  sigma=1.349720
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065716Jy  sigma=1.349720
! Fit after  self-cal, rms=0.065870Jy  sigma=1.349560
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8673 mas, bmaj=2.071 mas, bpa=-6.969 degrees
! Estimated noise=0.202258 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.56256e-05 Jy
! Component: 100  -  total flux cleaned = 0.000172784 Jy
! Component: 150  -  total flux cleaned = 0.000189406 Jy
! Component: 200  -  total flux cleaned = 0.000204454 Jy
! Total flux subtracted in 200 components = 0.000204454 Jy
! Clean residual min=-0.001280 max=0.001227 Jy/beam
! Clean residual mean=0.000000 rms=0.000277 Jy/beam
! Combined flux in latest and established models = 0.107432 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 100 components and 0.107432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065860Jy  sigma=1.349323
! Fit after  self-cal, rms=0.065861Jy  sigma=1.349274
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.93513e-05 Jy
! Component: 100  -  total flux cleaned = 9.72403e-05 Jy
! Component: 150  -  total flux cleaned = 9.71235e-05 Jy
! Component: 200  -  total flux cleaned = 0.000124556 Jy
! Total flux subtracted in 200 components = 0.000124556 Jy
! Clean residual min=-0.001266 max=0.001196 Jy/beam
! Clean residual mean=0.000000 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.107556 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 109 components and 0.107556 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065855Jy  sigma=1.349115
! Fit after  self-cal, rms=0.065852Jy  sigma=1.349086
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065852Jy  sigma=1.349086
! Fit after  self-cal, rms=0.065934Jy  sigma=1.349067
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=3.382 mas, bpa=-5.886 degrees
! Estimated noise=0.265952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000132817 Jy
! Component: 100  -  total flux cleaned = -0.000111769 Jy
! Component: 150  -  total flux cleaned = -9.54717e-05 Jy
! Component: 200  -  total flux cleaned = -9.59185e-05 Jy
! Total flux subtracted in 200 components = -9.59185e-05 Jy
! Clean residual min=-0.001300 max=0.001371 Jy/beam
! Clean residual mean=0.000001 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.10746 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 124 components and 0.10746 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065930Jy  sigma=1.348987
! Fit after  self-cal, rms=0.065930Jy  sigma=1.348941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.38235e-05 Jy
! Component: 100  -  total flux cleaned = 7.13584e-05 Jy
! Component: 150  -  total flux cleaned = 6.10019e-05 Jy
! Component: 200  -  total flux cleaned = 3.35444e-05 Jy
! Total flux subtracted in 200 components = 3.35444e-05 Jy
! Clean residual min=-0.001282 max=0.001354 Jy/beam
! Clean residual mean=0.000001 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.107494 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 130 components and 0.107494 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065928Jy  sigma=1.348905
! Fit after  self-cal, rms=0.065925Jy  sigma=1.348882
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8686 mas, bmaj=2.074 mas, bpa=-7.006 degrees
! Estimated noise=0.202253 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8686 x 2.074 at -7.006 degrees (North through East)
! Clean map  min=-0.0011662  max=0.057362 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7044 mas, bmaj=1.747 mas, bpa=-6.42 degrees
! Estimated noise=0.351616 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0466893 Jy
! Component: 100  -  total flux cleaned = 0.0682882 Jy
! Component: 150  -  total flux cleaned = 0.0793884 Jy
! Component: 200  -  total flux cleaned = 0.0852837 Jy
! Total flux subtracted in 200 components = 0.0852837 Jy
! Clean residual min=-0.002753 max=0.003070 Jy/beam
! Clean residual mean=0.000000 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.0852837 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0852837 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8686 mas, bmaj=2.074 mas, bpa=-7.006 degrees
! Estimated noise=0.202253 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0056197 Jy
! Component: 100  -  total flux cleaned = 0.00920502 Jy
! Component: 150  -  total flux cleaned = 0.0118966 Jy
! Component: 200  -  total flux cleaned = 0.0139837 Jy
! Total flux subtracted in 200 components = 0.0139837 Jy
! Clean residual min=-0.001610 max=0.001508 Jy/beam
! Clean residual mean=0.000000 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.0992674 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 43 components and 0.0992674 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.063 mas, bmaj=3.382 mas, bpa=-5.886 degrees
! Estimated noise=0.265952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262142 Jy
! Component: 100  -  total flux cleaned = 0.00437598 Jy
! Component: 150  -  total flux cleaned = 0.00549764 Jy
! Component: 200  -  total flux cleaned = 0.00612793 Jy
! Total flux subtracted in 200 components = 0.00612793 Jy
! Clean residual min=-0.001510 max=0.001470 Jy/beam
! Clean residual mean=0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.105395 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00053343 Jy
! Component: 100  -  total flux cleaned = 0.000767945 Jy
! Component: 150  -  total flux cleaned = 0.00090142 Jy
! Component: 200  -  total flux cleaned = 0.000999201 Jy
! Total flux subtracted in 200 components = 0.000999201 Jy
! Clean residual min=-0.001412 max=0.001306 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.106395 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 90 components and 0.106395 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8686 mas, bmaj=2.074 mas, bpa=-7.006 degrees
! Estimated noise=0.202253 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.60059e-05 Jy
! Component: 100  -  total flux cleaned = 0.000142861 Jy
! Component: 150  -  total flux cleaned = 0.000186287 Jy
! Component: 200  -  total flux cleaned = 0.000206783 Jy
! Total flux subtracted in 200 components = 0.000206783 Jy
! Clean residual min=-0.001406 max=0.001165 Jy/beam
! Clean residual mean=0.000001 rms=0.000275 Jy/beam
! Combined flux in latest and established models = 0.106601 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.106601 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065949Jy  sigma=1.349392
! Fit after  self-cal, rms=0.065938Jy  sigma=1.349081
wmodel /J0622-0109_X_map.mod
! wmodel: Unable to open new model file: /J0622-0109_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0622-0109_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8686 x 2.074 at -7.006 degrees (North through East)
! Clean map  min=-0.0012432  max=0.057676 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0622-0109_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0576759 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00026969 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.40279 1.40279 2.80558 5.61115 11.2223 22.4446 44.8892 89.7784
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.057 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  213.859 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0622-0109_X_dfm.log closed on Thu May 19 23:07:11 2016