! Started logfile: /scr/pima/bg219i_uvs/J0555+3948_X_dfm.log on Thu May 19 23:05:54 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0555+3948_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0555+3948_X_uva.fits
! AN table 1: 29 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.928161 visibilities/baseline/integration-bin.
! Found source: J0555+3948
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11628 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0555+3948_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 12 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.372549Jy  sigma=34.392481
! Fit after  self-cal, rms=2.307242Jy  sigma=22.906807
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6866 mas, bmaj=2.176 mas, bpa=27.71 degrees
! Estimated noise=1.30691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.80536 Jy
! Component: 100  -  total flux cleaned = 2.54146 Jy
! Total flux subtracted in 100 components = 2.54146 Jy
! Clean residual min=-0.199485 max=0.367344 Jy/beam
! Clean residual mean=0.000067 rms=0.052320 Jy/beam
! Combined flux in latest and established models = 2.54146 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 2.54146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=1.093909Jy  sigma=10.527629
! Fit after  self-cal, rms=1.080393Jy  sigma=10.455734
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.456559 Jy
! Component: 100  -  total flux cleaned = 0.753276 Jy
! Total flux subtracted in 100 components = 0.753276 Jy
! Clean residual min=-0.088318 max=0.158378 Jy/beam
! Clean residual mean=0.000036 rms=0.024408 Jy/beam
! Combined flux in latest and established models = 3.29474 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 11 components and 3.29474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.534818Jy  sigma=5.101336
! Fit after  self-cal, rms=0.524963Jy  sigma=5.042410
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.202833 Jy
! Component: 100  -  total flux cleaned = 0.337981 Jy
! Total flux subtracted in 100 components = 0.337981 Jy
! Clean residual min=-0.045251 max=0.081963 Jy/beam
! Clean residual mean=0.000022 rms=0.013289 Jy/beam
! Combined flux in latest and established models = 3.63272 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 3.63272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.295569Jy  sigma=2.840083
! Fit after  self-cal, rms=0.292514Jy  sigma=2.817285
! Inverting map 
! Added new window around map position (-11.6, 23.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0956954 Jy
! Component: 100  -  total flux cleaned = 0.164362 Jy
! Total flux subtracted in 100 components = 0.164362 Jy
! Clean residual min=-0.028518 max=0.053963 Jy/beam
! Clean residual mean=0.000016 rms=0.008715 Jy/beam
! Combined flux in latest and established models = 3.79708 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 30 components and 3.79708 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.200350Jy  sigma=1.948410
! Fit after  self-cal, rms=0.199302Jy  sigma=1.938117
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8491 mas, bmaj=2.232 mas, bpa=26.61 degrees
! Estimated noise=0.673635 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0955926 Jy
! Component: 100  -  total flux cleaned = 0.157618 Jy
! Component: 150  -  total flux cleaned = 0.200808 Jy
! Component: 200  -  total flux cleaned = 0.232071 Jy
! Total flux subtracted in 200 components = 0.232071 Jy
! Clean residual min=-0.028363 max=0.024528 Jy/beam
! Clean residual mean=0.000012 rms=0.006556 Jy/beam
! Combined flux in latest and established models = 4.02915 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 61 components and 4.02915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112336Jy  sigma=1.133131
! Fit after  self-cal, rms=0.111731Jy  sigma=1.130432
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8491 x 2.232 at 26.61 degrees (North through East)
! Clean map  min=-0.027662  max=2.7801 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.97     NL        1.00     OV        0.97     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        0.98     
!   LA        0.98     NL        1.00     OV        0.97     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.00     KP        1.00     
!   LA        0.97     NL        1.00     OV        0.96     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.97     NL        1.00     OV        0.96     PT        1.00     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.97     NL        1.01     OV        0.97     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.97     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        0.99     
!   LA        0.98     NL        1.00     OV        0.97     PT        1.02     
!   SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.97     NL        1.00     OV        0.96     PT        1.00     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.98     NL        1.00     OV        0.97     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.98     NL        1.02     OV        0.97     PT        1.01     
!   SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.02     HN        1.03     KP        1.00     
!   LA        0.99     NL        1.01     OV        0.97     PT        1.00     
!   SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.01     
!   LA        0.98     NL        1.02     OV        0.97     PT        1.00     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.111731Jy  sigma=1.130432
! Fit after  self-cal, rms=0.078471Jy  sigma=0.783761
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8507 mas, bmaj=2.24 mas, bpa=26.59 degrees
! Estimated noise=0.671859 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 12.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391867 Jy
! Component: 100  -  total flux cleaned = 0.00325318 Jy
! Component: 150  -  total flux cleaned = 0.00361891 Jy
! Component: 200  -  total flux cleaned = 0.00406427 Jy
! Total flux subtracted in 200 components = 0.00406427 Jy
! Clean residual min=-0.006021 max=0.006357 Jy/beam
! Clean residual mean=0.000006 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 4.03322 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 4.03322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077172Jy  sigma=0.767725
! Fit after  self-cal, rms=0.076923Jy  sigma=0.766873
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076923Jy  sigma=0.766873
! Fit after  self-cal, rms=0.076732Jy  sigma=0.765912
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8509 mas, bmaj=2.24 mas, bpa=26.59 degrees
! Estimated noise=0.671669 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000592666 Jy
! Component: 100  -  total flux cleaned = 0.0011191 Jy
! Component: 150  -  total flux cleaned = 0.00180348 Jy
! Component: 200  -  total flux cleaned = 0.00220945 Jy
! Total flux subtracted in 200 components = 0.00220945 Jy
! Clean residual min=-0.005323 max=0.005347 Jy/beam
! Clean residual mean=0.000005 rms=0.001227 Jy/beam
! Combined flux in latest and established models = 4.03543 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 93 components and 4.03543 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076321Jy  sigma=0.761170
! Fit after  self-cal, rms=0.076213Jy  sigma=0.760729
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, -15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00197625 Jy
! Component: 100  -  total flux cleaned = 0.0023952 Jy
! Component: 150  -  total flux cleaned = 0.00367895 Jy
! Component: 200  -  total flux cleaned = 0.00438302 Jy
! Total flux subtracted in 200 components = 0.00438302 Jy
! Clean residual min=-0.004984 max=0.004325 Jy/beam
! Clean residual mean=0.000006 rms=0.001071 Jy/beam
! Combined flux in latest and established models = 4.03981 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 107 components and 4.03981 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075840Jy  sigma=0.755513
! Fit after  self-cal, rms=0.075747Jy  sigma=0.754900
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075747Jy  sigma=0.754900
! Fit after  self-cal, rms=0.075664Jy  sigma=0.754374
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8509 mas, bmaj=2.24 mas, bpa=26.59 degrees
! Estimated noise=0.671554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119386 Jy
! Component: 100  -  total flux cleaned = 0.0011914 Jy
! Component: 150  -  total flux cleaned = 0.00158548 Jy
! Component: 200  -  total flux cleaned = 0.0020287 Jy
! Total flux subtracted in 200 components = 0.0020287 Jy
! Clean residual min=-0.004678 max=0.004106 Jy/beam
! Clean residual mean=0.000006 rms=0.000990 Jy/beam
! Combined flux in latest and established models = 4.04184 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 120 components and 4.04184 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075467Jy  sigma=0.752176
! Fit after  self-cal, rms=0.075424Jy  sigma=0.751919
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000188548 Jy
! Component: 100  -  total flux cleaned = 0.000682928 Jy
! Component: 150  -  total flux cleaned = 0.00081694 Jy
! Component: 200  -  total flux cleaned = 0.00100531 Jy
! Total flux subtracted in 200 components = 0.00100531 Jy
! Clean residual min=-0.004329 max=0.003844 Jy/beam
! Clean residual mean=0.000006 rms=0.000941 Jy/beam
! Combined flux in latest and established models = 4.04284 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 124 components and 4.04284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075311Jy  sigma=0.750572
! Fit after  self-cal, rms=0.075286Jy  sigma=0.750462
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075286Jy  sigma=0.750462
! Fit after  self-cal, rms=0.075267Jy  sigma=0.750237
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.993 mas, bmaj=2.609 mas, bpa=16.81 degrees
! Estimated noise=1.02747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130265 Jy
! Component: 100  -  total flux cleaned = 0.00146185 Jy
! Component: 150  -  total flux cleaned = 0.00180919 Jy
! Component: 200  -  total flux cleaned = 0.00200062 Jy
! Total flux subtracted in 200 components = 0.00200062 Jy
! Clean residual min=-0.004544 max=0.004882 Jy/beam
! Clean residual mean=0.000014 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 4.04484 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 131 components and 4.04484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075160Jy  sigma=0.749817
! Fit after  self-cal, rms=0.075129Jy  sigma=0.749656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025016 Jy
! Component: 100  -  total flux cleaned = 0.000308454 Jy
! Component: 150  -  total flux cleaned = 0.000474398 Jy
! Component: 200  -  total flux cleaned = 0.000576494 Jy
! Total flux subtracted in 200 components = 0.000576494 Jy
! Clean residual min=-0.004317 max=0.004541 Jy/beam
! Clean residual mean=0.000013 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 4.04542 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 138 components and 4.04542 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075072Jy  sigma=0.749682
! Fit after  self-cal, rms=0.075053Jy  sigma=0.749591
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.851 mas, bmaj=2.24 mas, bpa=26.59 degrees
! Estimated noise=0.671525 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.851 x 2.24 at 26.59 degrees (North through East)
! Clean map  min=-0.003686  max=2.7674 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075053Jy  sigma=0.749591
! Fit after  self-cal, rms=0.064833Jy  sigma=0.585016
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=2.239 mas, bpa=26.59 degrees
! Estimated noise=0.67181 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000600257 Jy
! Component: 100  -  total flux cleaned = 0.000255549 Jy
! Component: 150  -  total flux cleaned = -0.000113216 Jy
! Component: 200  -  total flux cleaned = -0.000109257 Jy
! Total flux subtracted in 200 components = -0.000109257 Jy
! Clean residual min=-0.003787 max=0.003338 Jy/beam
! Clean residual mean=0.000005 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 4.04531 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 154 components and 4.04531 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064717Jy  sigma=0.583423
! Fit after  self-cal, rms=0.064709Jy  sigma=0.583350
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.83459e-05 Jy
! Component: 100  -  total flux cleaned = 1.98006e-05 Jy
! Component: 150  -  total flux cleaned = 6.36952e-05 Jy
! Component: 200  -  total flux cleaned = 0.000151647 Jy
! Total flux subtracted in 200 components = 0.000151647 Jy
! Clean residual min=-0.003657 max=0.003244 Jy/beam
! Clean residual mean=0.000005 rms=0.000783 Jy/beam
! Combined flux in latest and established models = 4.04546 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 159 components and 4.04546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064642Jy  sigma=0.582522
! Fit after  self-cal, rms=0.064637Jy  sigma=0.582481
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064637Jy  sigma=0.582481
! Fit after  self-cal, rms=0.064586Jy  sigma=0.582301
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6875 mas, bmaj=2.18 mas, bpa=27.68 degrees
! Estimated noise=1.30784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.80814 Jy
! Component: 100  -  total flux cleaned = 2.55187 Jy
! Component: 150  -  total flux cleaned = 3.0043 Jy
! Component: 200  -  total flux cleaned = 3.29778 Jy
! Total flux subtracted in 200 components = 3.29778 Jy
! Clean residual min=-0.088213 max=0.157875 Jy/beam
! Clean residual mean=0.000029 rms=0.022808 Jy/beam
! Combined flux in latest and established models = 3.29778 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 3.29778 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=2.239 mas, bpa=26.59 degrees
! Estimated noise=0.671805 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.312216 Jy
! Component: 100  -  total flux cleaned = 0.468935 Jy
! Component: 150  -  total flux cleaned = 0.555389 Jy
! Component: 200  -  total flux cleaned = 0.609537 Jy
! Total flux subtracted in 200 components = 0.609537 Jy
! Clean residual min=-0.015765 max=0.029957 Jy/beam
! Clean residual mean=0.000019 rms=0.005654 Jy/beam
! Combined flux in latest and established models = 3.90732 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 33 components and 3.90732 Jy
! Inverting map 
! Added new window around map position (-1.2, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0360916 Jy
! Component: 100  -  total flux cleaned = 0.0604966 Jy
! Component: 150  -  total flux cleaned = 0.0780237 Jy
! Component: 200  -  total flux cleaned = 0.0913921 Jy
! Total flux subtracted in 200 components = 0.0913921 Jy
! Clean residual min=-0.008303 max=0.010009 Jy/beam
! Clean residual mean=0.000010 rms=0.002138 Jy/beam
! Combined flux in latest and established models = 3.99871 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 61 components and 3.99871 Jy
! Inverting map 
! Added new window around map position (2.6, -7.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011069 Jy
! Component: 100  -  total flux cleaned = 0.0188996 Jy
! Component: 150  -  total flux cleaned = 0.0244597 Jy
! Component: 200  -  total flux cleaned = 0.0291112 Jy
! Total flux subtracted in 200 components = 0.0291112 Jy
! Clean residual min=-0.005664 max=0.005595 Jy/beam
! Clean residual mean=0.000008 rms=0.001306 Jy/beam
! Combined flux in latest and established models = 4.02782 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 83 components and 4.02782 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.993 mas, bmaj=2.61 mas, bpa=16.78 degrees
! Estimated noise=1.02733 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0077968 Jy
! Component: 100  -  total flux cleaned = 0.0119562 Jy
! Component: 150  -  total flux cleaned = 0.0122742 Jy
! Component: 200  -  total flux cleaned = 0.0122671 Jy
! Total flux subtracted in 200 components = 0.0122671 Jy
! Clean residual min=-0.004083 max=0.004588 Jy/beam
! Clean residual mean=0.000017 rms=0.001260 Jy/beam
! Combined flux in latest and established models = 4.04008 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.64003e-06 Jy
! Component: 100  -  total flux cleaned = 8.19547e-05 Jy
! Component: 150  -  total flux cleaned = 0.000157246 Jy
! Component: 200  -  total flux cleaned = 8.57704e-05 Jy
! Total flux subtracted in 200 components = 8.57704e-05 Jy
! Clean residual min=-0.003385 max=0.003998 Jy/beam
! Clean residual mean=0.000015 rms=0.001117 Jy/beam
! Combined flux in latest and established models = 4.04017 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 118 components and 4.04017 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8513 mas, bmaj=2.239 mas, bpa=26.59 degrees
! Estimated noise=0.671805 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289061 Jy
! Component: 100  -  total flux cleaned = 0.0031615 Jy
! Component: 150  -  total flux cleaned = 0.00316599 Jy
! Component: 200  -  total flux cleaned = 0.00296458 Jy
! Total flux subtracted in 200 components = 0.00296458 Jy
! Clean residual min=-0.004173 max=0.003705 Jy/beam
! Clean residual mean=0.000006 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 4.04313 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 143 components and 4.04314 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064601Jy  sigma=0.586329
! Fit after  self-cal, rms=0.064571Jy  sigma=0.585076
wmodel /J0555+3948_X_map.mod
! wmodel: Unable to open new model file: /J0555+3948_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0555+3948_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8513 x 2.239 at 26.59 degrees (North through East)
! Clean map  min=-0.004308  max=2.7726 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0555+3948_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.77259 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00081939 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0886598 0.0886598 0.17732 0.354639 0.709278 1.41856 2.83711 5.67423 11.3485 22.6969 45.3938 90.7876
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0024 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.772 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  3383.72 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0555+3948_X_dfm.log closed on Thu May 19 23:05:58 2016