! Started logfile: /scr/pima/bg219i_uvs/J0549-2752_X_dfm.log on Thu May 19 23:05:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0549-2752_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0549-2752_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897863 visibilities/baseline/integration-bin.
! Found source: J0549-2752
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25212 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0549-2752_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012284Jy  sigma=20.409308
! Fit after  self-cal, rms=0.875701Jy  sigma=17.590163
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6114 mas, bmaj=1.655 mas, bpa=-5.951 degrees
! Estimated noise=0.486564 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0984719 Jy
! Component: 100  -  total flux cleaned = 0.119958 Jy
! Total flux subtracted in 100 components = 0.119958 Jy
! Clean residual min=-0.005937 max=0.021285 Jy/beam
! Clean residual mean=-0.000011 rms=0.001638 Jy/beam
! Combined flux in latest and established models = 0.119958 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.119958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083428Jy  sigma=1.552784
! Fit after  self-cal, rms=0.083294Jy  sigma=1.549776
! Inverting map 
! Added new window around map position (-2.8, 5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177115 Jy
! Component: 100  -  total flux cleaned = 0.0248556 Jy
! Total flux subtracted in 100 components = 0.0248556 Jy
! Clean residual min=-0.004043 max=0.005560 Jy/beam
! Clean residual mean=-0.000006 rms=0.001042 Jy/beam
! Combined flux in latest and established models = 0.144814 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.144814 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079402Jy  sigma=1.447632
! Fit after  self-cal, rms=0.078971Jy  sigma=1.438315
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00607115 Jy
! Component: 100  -  total flux cleaned = 0.00965774 Jy
! Total flux subtracted in 100 components = 0.00965774 Jy
! Clean residual min=-0.003501 max=0.004876 Jy/beam
! Clean residual mean=-0.000005 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.154472 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 17 components and 0.154472 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078346Jy  sigma=1.418572
! Fit after  self-cal, rms=0.078278Jy  sigma=1.417372
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8168 mas, bmaj=2.054 mas, bpa=-5.759 degrees
! Estimated noise=0.239262 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.8, 1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00726499 Jy
! Component: 100  -  total flux cleaned = 0.0116501 Jy
! Component: 150  -  total flux cleaned = 0.0147564 Jy
! Component: 200  -  total flux cleaned = 0.0170129 Jy
! Total flux subtracted in 200 components = 0.0170129 Jy
! Clean residual min=-0.002538 max=0.004619 Jy/beam
! Clean residual mean=-0.000006 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.171485 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 64 components and 0.171485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077555Jy  sigma=1.399780
! Fit after  self-cal, rms=0.077488Jy  sigma=1.397752
! Inverting map 
! Added new window around map position (5.6, -16.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348686 Jy
! Component: 100  -  total flux cleaned = 0.00467521 Jy
! Component: 150  -  total flux cleaned = 0.00490631 Jy
! Component: 200  -  total flux cleaned = 0.00511197 Jy
! Total flux subtracted in 200 components = 0.00511197 Jy
! Clean residual min=-0.002143 max=0.002813 Jy/beam
! Clean residual mean=-0.000004 rms=0.000518 Jy/beam
! Combined flux in latest and established models = 0.176596 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 95 components and 0.176597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077236Jy  sigma=1.393824
! Fit after  self-cal, rms=0.077231Jy  sigma=1.393435
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8168 x 2.054 at -5.759 degrees (North through East)
! Clean map  min=-0.0020283  max=0.12571 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.16     KP        0.97     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.96     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.16     KP        0.98     
!   LA        0.99     MK        0.99     NL        0.98     OV        1.01     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.14     KP        1.00     
!   LA        1.01     MK        1.01     NL        1.02     OV        0.94     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        1.14     KP        1.00     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.99     SC        0.93     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.13     KP        0.98     
!   LA        1.01     MK        1.01     NL        0.96     OV        0.96     
!   PT        1.02     SC        1.06     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.10     KP        0.98     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.08     KP        0.99     
!   LA        0.98     MK        1.01     NL        0.98     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.05     KP        1.00     
!   LA        1.01     MK        0.98     NL        1.03     OV        0.95     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.10     KP        0.98     
!   LA        1.01     MK        1.00     NL        0.97     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.14     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.97     OV        0.99     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        1.13     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.97     
!   PT        1.03     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.077231Jy  sigma=1.393435
! Fit after  self-cal, rms=0.079591Jy  sigma=1.388155
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8216 mas, bmaj=2.05 mas, bpa=-5.472 degrees
! Estimated noise=0.238852 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.6, 7.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126774 Jy
! Component: 100  -  total flux cleaned = 0.000842778 Jy
! Component: 150  -  total flux cleaned = 0.000582926 Jy
! Component: 200  -  total flux cleaned = 0.000360219 Jy
! Total flux subtracted in 200 components = 0.000360219 Jy
! Clean residual min=-0.001887 max=0.001862 Jy/beam
! Clean residual mean=-0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.176957 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 117 components and 0.176957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079479Jy  sigma=1.386315
! Fit after  self-cal, rms=0.079536Jy  sigma=1.386088
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079536Jy  sigma=1.386088
! Fit after  self-cal, rms=0.080673Jy  sigma=1.382867
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8211 mas, bmaj=2.047 mas, bpa=-5.523 degrees
! Estimated noise=0.238753 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664688 Jy
! Component: 100  -  total flux cleaned = 0.000574383 Jy
! Component: 150  -  total flux cleaned = 0.000575545 Jy
! Component: 200  -  total flux cleaned = 0.000553855 Jy
! Total flux subtracted in 200 components = 0.000553855 Jy
! Clean residual min=-0.001573 max=0.001393 Jy/beam
! Clean residual mean=-0.000002 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.177511 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 128 components and 0.177511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080654Jy  sigma=1.382308
! Fit after  self-cal, rms=0.080677Jy  sigma=1.382205
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230057 Jy
! Component: 100  -  total flux cleaned = 0.000190567 Jy
! Component: 150  -  total flux cleaned = 0.000190578 Jy
! Component: 200  -  total flux cleaned = 0.000173476 Jy
! Total flux subtracted in 200 components = 0.000173476 Jy
! Clean residual min=-0.001560 max=0.001370 Jy/beam
! Clean residual mean=-0.000002 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.177684 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 137 components and 0.177684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080668Jy  sigma=1.382024
! Fit after  self-cal, rms=0.080667Jy  sigma=1.382012
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080667Jy  sigma=1.382012
! Fit after  self-cal, rms=0.081450Jy  sigma=1.381121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8213 mas, bmaj=2.046 mas, bpa=-5.51 degrees
! Estimated noise=0.238941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152373 Jy
! Component: 100  -  total flux cleaned = 0.000186131 Jy
! Component: 150  -  total flux cleaned = 0.00020175 Jy
! Component: 200  -  total flux cleaned = 0.000230228 Jy
! Total flux subtracted in 200 components = 0.000230228 Jy
! Clean residual min=-0.001510 max=0.001310 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.177914 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 146 components and 0.177914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081443Jy  sigma=1.380960
! Fit after  self-cal, rms=0.081452Jy  sigma=1.380938
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.79458e-05 Jy
! Component: 100  -  total flux cleaned = 0.000117306 Jy
! Component: 150  -  total flux cleaned = 0.000142143 Jy
! Component: 200  -  total flux cleaned = 0.000177994 Jy
! Total flux subtracted in 200 components = 0.000177994 Jy
! Clean residual min=-0.001499 max=0.001304 Jy/beam
! Clean residual mean=-0.000001 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.178092 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 153 components and 0.178092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081448Jy  sigma=1.380860
! Fit after  self-cal, rms=0.081447Jy  sigma=1.380855
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081447Jy  sigma=1.380855
! Fit after  self-cal, rms=0.081532Jy  sigma=1.380846
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=5.467 mas, bpa=0.1122 degrees
! Estimated noise=0.302367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000461751 Jy
! Component: 100  -  total flux cleaned = 0.000577911 Jy
! Component: 150  -  total flux cleaned = 0.000635636 Jy
! Component: 200  -  total flux cleaned = 0.000688536 Jy
! Total flux subtracted in 200 components = 0.000688536 Jy
! Clean residual min=-0.001344 max=0.001390 Jy/beam
! Clean residual mean=-0.000002 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.178781 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 161 components and 0.178781 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081531Jy  sigma=1.380825
! Fit after  self-cal, rms=0.081531Jy  sigma=1.380816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000129649 Jy
! Component: 100  -  total flux cleaned = 0.000179182 Jy
! Component: 150  -  total flux cleaned = 0.000206406 Jy
! Component: 200  -  total flux cleaned = 0.00023174 Jy
! Total flux subtracted in 200 components = 0.00023174 Jy
! Clean residual min=-0.001301 max=0.001357 Jy/beam
! Clean residual mean=-0.000002 rms=0.000355 Jy/beam
! Combined flux in latest and established models = 0.179013 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 163 components and 0.179013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081531Jy  sigma=1.380825
! Fit after  self-cal, rms=0.081531Jy  sigma=1.380821
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8213 mas, bmaj=2.045 mas, bpa=-5.477 degrees
! Estimated noise=0.238986 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8213 x 2.045 at -5.477 degrees (North through East)
! Clean map  min=-0.001504  max=0.1258 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.613 mas, bmaj=1.644 mas, bpa=-5.67 degrees
! Estimated noise=0.487058 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.098006 Jy
! Component: 100  -  total flux cleaned = 0.127097 Jy
! Component: 150  -  total flux cleaned = 0.141082 Jy
! Component: 200  -  total flux cleaned = 0.149499 Jy
! Total flux subtracted in 200 components = 0.149499 Jy
! Clean residual min=-0.003622 max=0.004730 Jy/beam
! Clean residual mean=-0.000004 rms=0.000928 Jy/beam
! Combined flux in latest and established models = 0.149499 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.149499 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8213 mas, bmaj=2.045 mas, bpa=-5.477 degrees
! Estimated noise=0.238986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0095214 Jy
! Component: 100  -  total flux cleaned = 0.0154506 Jy
! Component: 150  -  total flux cleaned = 0.0194636 Jy
! Component: 200  -  total flux cleaned = 0.0224054 Jy
! Total flux subtracted in 200 components = 0.0224054 Jy
! Clean residual min=-0.001469 max=0.001888 Jy/beam
! Clean residual mean=-0.000002 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.171905 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 58 components and 0.171905 Jy
! Inverting map 
! Added new window around map position (-7.8, 23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227623 Jy
! Component: 100  -  total flux cleaned = 0.00402516 Jy
! Component: 150  -  total flux cleaned = 0.00503965 Jy
! Component: 200  -  total flux cleaned = 0.00578841 Jy
! Total flux subtracted in 200 components = 0.00578841 Jy
! Clean residual min=-0.001501 max=0.001413 Jy/beam
! Clean residual mean=-0.000002 rms=0.000330 Jy/beam
! Combined flux in latest and established models = 0.177693 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 79 components and 0.177693 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.245 mas, bmaj=5.467 mas, bpa=0.1122 degrees
! Estimated noise=0.302367 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133117 Jy
! Component: 100  -  total flux cleaned = 0.00179197 Jy
! Component: 150  -  total flux cleaned = 0.00195169 Jy
! Component: 200  -  total flux cleaned = 0.002069 Jy
! Total flux subtracted in 200 components = 0.002069 Jy
! Clean residual min=-0.001338 max=0.001349 Jy/beam
! Clean residual mean=-0.000002 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.179762 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.41835e-05 Jy
! Component: 100  -  total flux cleaned = 0.000161735 Jy
! Component: 150  -  total flux cleaned = 0.000232962 Jy
! Component: 200  -  total flux cleaned = 0.000298196 Jy
! Total flux subtracted in 200 components = 0.000298196 Jy
! Clean residual min=-0.001251 max=0.001292 Jy/beam
! Clean residual mean=-0.000002 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.18006 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 115 components and 0.18006 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8213 mas, bmaj=2.045 mas, bpa=-5.477 degrees
! Estimated noise=0.238986 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000164767 Jy
! Component: 100  -  total flux cleaned = -0.000338119 Jy
! Component: 150  -  total flux cleaned = -0.000390476 Jy
! Component: 200  -  total flux cleaned = -0.000437552 Jy
! Total flux subtracted in 200 components = -0.000437552 Jy
! Clean residual min=-0.001351 max=0.001302 Jy/beam
! Clean residual mean=-0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.179623 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 143 components and 0.179623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081541Jy  sigma=1.381018
! Fit after  self-cal, rms=0.081528Jy  sigma=1.380888
wmodel /J0549-2752_X_map.mod
! wmodel: Unable to open new model file: /J0549-2752_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0549-2752_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8213 x 2.045 at -5.477 degrees (North through East)
! Clean map  min=-0.0012759  max=0.1255 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0549-2752_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1255 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290276 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.693886 0.693886 1.38777 2.77554 5.55109 11.1022 22.2043 44.4087 88.8174
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.125 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  432.347 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0549-2752_X_dfm.log closed on Thu May 19 23:05:41 2016