! Started logfile: /scr/pima/bg219i_uvs/J0536-3401_X_dfm.log on Thu May 19 23:04:56 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0536-3401_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0536-3401_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.612698 visibilities/baseline/integration-bin.
! Found source: J0536-3401
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 4632 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0536-3401_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.276180Jy  sigma=25.767526
! Fit after  self-cal, rms=0.287664Jy  sigma=5.233321
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5836 mas, bmaj=1.499 mas, bpa=-4.579 degrees
! Estimated noise=0.809838 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.561853 Jy
! Component: 100  -  total flux cleaned = 0.705222 Jy
! Total flux subtracted in 100 components = 0.705222 Jy
! Clean residual min=-0.023590 max=0.058488 Jy/beam
! Clean residual mean=-0.000013 rms=0.006321 Jy/beam
! Combined flux in latest and established models = 0.705222 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.705222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.147127Jy  sigma=2.918676
! Fit after  self-cal, rms=0.147132Jy  sigma=2.918495
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0594478 Jy
! Component: 100  -  total flux cleaned = 0.0852039 Jy
! Total flux subtracted in 100 components = 0.0852039 Jy
! Clean residual min=-0.020126 max=0.039191 Jy/beam
! Clean residual mean=0.000000 rms=0.004268 Jy/beam
! Combined flux in latest and established models = 0.790425 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.790425 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.114885Jy  sigma=2.073518
! Fit after  self-cal, rms=0.114882Jy  sigma=2.073140
! Inverting map 
! Added new window around map position (-0.6, -2.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0365221 Jy
! Component: 100  -  total flux cleaned = 0.0559801 Jy
! Total flux subtracted in 100 components = 0.0559801 Jy
! Clean residual min=-0.017121 max=0.022049 Jy/beam
! Clean residual mean=0.000007 rms=0.003235 Jy/beam
! Combined flux in latest and established models = 0.846406 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.846406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100016Jy  sigma=1.750269
! Fit after  self-cal, rms=0.098472Jy  sigma=1.711405
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7531 mas, bmaj=1.872 mas, bpa=-5.243 degrees
! Estimated noise=0.546473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199583 Jy
! Component: 100  -  total flux cleaned = 0.0223294 Jy
! Component: 150  -  total flux cleaned = 0.0230955 Jy
! Component: 200  -  total flux cleaned = 0.0234286 Jy
! Total flux subtracted in 200 components = 0.0234286 Jy
! Clean residual min=-0.011010 max=0.012924 Jy/beam
! Clean residual mean=0.000030 rms=0.002285 Jy/beam
! Combined flux in latest and established models = 0.869834 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 48 components and 0.869834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092908Jy  sigma=1.607963
! Fit after  self-cal, rms=0.092873Jy  sigma=1.606776
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7531 x 1.872 at -5.243 degrees (North through East)
! Clean map  min=-0.010105  max=0.72112 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.18     KP        0.98     
!   LA        1.01     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.13     KP        0.99     
!   LA        1.00     MK        0.99     NL        1.01     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.17     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.17     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.04     OV        0.97     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.20     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.03     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.12     KP        0.98     
!   LA        1.00     MK        0.98     NL        1.03     OV        0.98     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.01     HN        1.17     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.19     KP        1.00     
!   LA        1.00     MK        0.96     NL        1.03     OV        0.97     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.17     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.20     KP        0.98     
!   LA        1.00     MK        0.99     NL        1.06     OV        1.00     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.16     KP        1.00     
!   LA        0.99     MK        0.97     NL        1.03     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.092873Jy  sigma=1.606776
! Fit after  self-cal, rms=0.089542Jy  sigma=1.511388
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7519 mas, bmaj=1.865 mas, bpa=-5.08 degrees
! Estimated noise=0.549258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00508745 Jy
! Component: 100  -  total flux cleaned = 0.00563418 Jy
! Component: 150  -  total flux cleaned = 0.00563483 Jy
! Component: 200  -  total flux cleaned = 0.00578356 Jy
! Total flux subtracted in 200 components = 0.00578356 Jy
! Clean residual min=-0.005945 max=0.006553 Jy/beam
! Clean residual mean=0.000023 rms=0.001384 Jy/beam
! Combined flux in latest and established models = 0.875618 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 70 components and 0.875618 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088787Jy  sigma=1.493619
! Fit after  self-cal, rms=0.088791Jy  sigma=1.492778
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088791Jy  sigma=1.492778
! Fit after  self-cal, rms=0.087496Jy  sigma=1.455313
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7517 mas, bmaj=1.863 mas, bpa=-5.096 degrees
! Estimated noise=0.549243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000400272 Jy
! Component: 100  -  total flux cleaned = -0.000401014 Jy
! Component: 150  -  total flux cleaned = -0.00049091 Jy
! Component: 200  -  total flux cleaned = -0.000493448 Jy
! Total flux subtracted in 200 components = -0.000493448 Jy
! Clean residual min=-0.004177 max=0.004987 Jy/beam
! Clean residual mean=0.000002 rms=0.001020 Jy/beam
! Combined flux in latest and established models = 0.875124 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.875124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087262Jy  sigma=1.452034
! Fit after  self-cal, rms=0.087261Jy  sigma=1.451921
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-5.4, 13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353651 Jy
! Component: 100  -  total flux cleaned = 0.00320605 Jy
! Component: 150  -  total flux cleaned = 0.00301741 Jy
! Component: 200  -  total flux cleaned = 0.00283825 Jy
! Total flux subtracted in 200 components = 0.00283825 Jy
! Clean residual min=-0.003777 max=0.004067 Jy/beam
! Clean residual mean=0.000000 rms=0.000962 Jy/beam
! Combined flux in latest and established models = 0.877963 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 100 components and 0.877963 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086849Jy  sigma=1.446945
! Fit after  self-cal, rms=0.086848Jy  sigma=1.446780
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086848Jy  sigma=1.446780
! Fit after  self-cal, rms=0.086666Jy  sigma=1.444621
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7514 mas, bmaj=1.863 mas, bpa=-5.103 degrees
! Estimated noise=0.548477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000171709 Jy
! Component: 100  -  total flux cleaned = -0.000167547 Jy
! Component: 150  -  total flux cleaned = -0.00047433 Jy
! Component: 200  -  total flux cleaned = -0.000692 Jy
! Total flux subtracted in 200 components = -0.000692 Jy
! Clean residual min=-0.003629 max=0.003882 Jy/beam
! Clean residual mean=-0.000003 rms=0.000885 Jy/beam
! Combined flux in latest and established models = 0.877271 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 105 components and 0.87727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086461Jy  sigma=1.442357
! Fit after  self-cal, rms=0.086460Jy  sigma=1.442286
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.6, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00214724 Jy
! Component: 100  -  total flux cleaned = 0.00240516 Jy
! Component: 150  -  total flux cleaned = 0.00240686 Jy
! Component: 200  -  total flux cleaned = 0.00234216 Jy
! Total flux subtracted in 200 components = 0.00234216 Jy
! Clean residual min=-0.003372 max=0.003410 Jy/beam
! Clean residual mean=-0.000002 rms=0.000833 Jy/beam
! Combined flux in latest and established models = 0.879613 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.879613 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086237Jy  sigma=1.439041
! Fit after  self-cal, rms=0.086231Jy  sigma=1.438926
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086231Jy  sigma=1.438926
! Fit after  self-cal, rms=0.086057Jy  sigma=1.438505
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.468 mas, bmaj=6.213 mas, bpa=5.368 degrees
! Estimated noise=0.765327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000904614 Jy
! Component: 100  -  total flux cleaned = -0.00113685 Jy
! Component: 150  -  total flux cleaned = -0.0013444 Jy
! Component: 200  -  total flux cleaned = -0.0015397 Jy
! Total flux subtracted in 200 components = -0.0015397 Jy
! Clean residual min=-0.004717 max=0.003497 Jy/beam
! Clean residual mean=-0.000001 rms=0.001140 Jy/beam
! Combined flux in latest and established models = 0.878073 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 127 components and 0.878073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085992Jy  sigma=1.438264
! Fit after  self-cal, rms=0.085991Jy  sigma=1.438200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000553441 Jy
! Component: 100  -  total flux cleaned = -0.000641506 Jy
! Component: 150  -  total flux cleaned = -0.000766293 Jy
! Component: 200  -  total flux cleaned = -0.000881711 Jy
! Total flux subtracted in 200 components = -0.000881711 Jy
! Clean residual min=-0.004539 max=0.003425 Jy/beam
! Clean residual mean=-0.000000 rms=0.001116 Jy/beam
! Combined flux in latest and established models = 0.877191 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 130 components and 0.877191 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085971Jy  sigma=1.438243
! Fit after  self-cal, rms=0.085970Jy  sigma=1.438214
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7512 mas, bmaj=1.863 mas, bpa=-5.093 degrees
! Estimated noise=0.547715 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7512 x 1.863 at -5.093 degrees (North through East)
! Clean map  min=-0.0047653  max=0.72441 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085970Jy  sigma=1.438214
! Fit after  self-cal, rms=0.080754Jy  sigma=1.325964
! Inverting map and beam 
! Estimated beam: bmin=0.7508 mas, bmaj=1.861 mas, bpa=-5.067 degrees
! Estimated noise=0.544694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00324951 Jy
! Component: 100  -  total flux cleaned = -0.00285697 Jy
! Component: 150  -  total flux cleaned = -0.00277515 Jy
! Component: 200  -  total flux cleaned = -0.00261673 Jy
! Total flux subtracted in 200 components = -0.00261673 Jy
! Clean residual min=-0.004717 max=0.003967 Jy/beam
! Clean residual mean=-0.000001 rms=0.000880 Jy/beam
! Combined flux in latest and established models = 0.874575 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 137 components and 0.874575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080308Jy  sigma=1.321932
! Fit after  self-cal, rms=0.080304Jy  sigma=1.321871
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.02772e-05 Jy
! Component: 100  -  total flux cleaned = -9.19241e-05 Jy
! Component: 150  -  total flux cleaned = -0.000158395 Jy
! Component: 200  -  total flux cleaned = -0.000157273 Jy
! Total flux subtracted in 200 components = -0.000157273 Jy
! Clean residual min=-0.004493 max=0.003770 Jy/beam
! Clean residual mean=-0.000001 rms=0.000854 Jy/beam
! Combined flux in latest and established models = 0.874417 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 144 components and 0.874417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080159Jy  sigma=1.320147
! Fit after  self-cal, rms=0.080158Jy  sigma=1.320109
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080158Jy  sigma=1.320109
! Fit after  self-cal, rms=0.079125Jy  sigma=1.308809
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.581 mas, bmaj=1.491 mas, bpa=-4.303 degrees
! Estimated noise=0.801404 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.555878 Jy
! Component: 100  -  total flux cleaned = 0.698312 Jy
! Component: 150  -  total flux cleaned = 0.760619 Jy
! Component: 200  -  total flux cleaned = 0.796355 Jy
! Total flux subtracted in 200 components = 0.796355 Jy
! Clean residual min=-0.011231 max=0.020010 Jy/beam
! Clean residual mean=-0.000007 rms=0.002701 Jy/beam
! Combined flux in latest and established models = 0.796355 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.796355 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7504 mas, bmaj=1.86 mas, bpa=-5.042 degrees
! Estimated noise=0.542433 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0329703 Jy
! Component: 100  -  total flux cleaned = 0.0494757 Jy
! Component: 150  -  total flux cleaned = 0.0595649 Jy
! Component: 200  -  total flux cleaned = 0.0667598 Jy
! Total flux subtracted in 200 components = 0.0667598 Jy
! Clean residual min=-0.006070 max=0.006513 Jy/beam
! Clean residual mean=-0.000001 rms=0.001242 Jy/beam
! Combined flux in latest and established models = 0.863115 Jy
! Adding 41 model components to the UV plane model.
! The established model now contains 51 components and 0.863115 Jy
! Inverting map 
! Added new window around map position (0.8, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00643576 Jy
! Component: 100  -  total flux cleaned = 0.00966504 Jy
! Component: 150  -  total flux cleaned = 0.0108025 Jy
! Component: 200  -  total flux cleaned = 0.0115418 Jy
! Total flux subtracted in 200 components = 0.0115418 Jy
! Clean residual min=-0.005208 max=0.004642 Jy/beam
! Clean residual mean=-0.000002 rms=0.001043 Jy/beam
! Combined flux in latest and established models = 0.874657 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 71 components and 0.874657 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.464 mas, bmaj=6.197 mas, bpa=5.416 degrees
! Estimated noise=0.759877 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000439607 Jy
! Component: 100  -  total flux cleaned = 0.000232984 Jy
! Component: 150  -  total flux cleaned = 0.00023755 Jy
! Component: 200  -  total flux cleaned = 0.00039508 Jy
! Total flux subtracted in 200 components = 0.00039508 Jy
! Clean residual min=-0.005250 max=0.003924 Jy/beam
! Clean residual mean=-0.000006 rms=0.001345 Jy/beam
! Combined flux in latest and established models = 0.875052 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139968 Jy
! Component: 100  -  total flux cleaned = 6.42505e-06 Jy
! Component: 150  -  total flux cleaned = -0.000122004 Jy
! Component: 200  -  total flux cleaned = -0.000242007 Jy
! Total flux subtracted in 200 components = -0.000242007 Jy
! Clean residual min=-0.005042 max=0.003713 Jy/beam
! Clean residual mean=-0.000005 rms=0.001281 Jy/beam
! Combined flux in latest and established models = 0.87481 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 96 components and 0.87481 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7504 mas, bmaj=1.86 mas, bpa=-5.042 degrees
! Estimated noise=0.542433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000151846 Jy
! Component: 100  -  total flux cleaned = -0.000150301 Jy
! Component: 150  -  total flux cleaned = -0.000265236 Jy
! Component: 200  -  total flux cleaned = -0.000482114 Jy
! Total flux subtracted in 200 components = -0.000482114 Jy
! Clean residual min=-0.004322 max=0.003908 Jy/beam
! Clean residual mean=-0.000001 rms=0.000910 Jy/beam
! Combined flux in latest and established models = 0.874328 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 116 components and 0.874328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079333Jy  sigma=1.316437
! Fit after  self-cal, rms=0.079292Jy  sigma=1.315684
wmodel /J0536-3401_X_map.mod
! wmodel: Unable to open new model file: /J0536-3401_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0536-3401_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7504 x 1.86 at -5.042 degrees (North through East)
! Clean map  min=-0.0041289  max=0.71218 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0536-3401_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.712182 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000903458 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.380573 0.380573 0.761147 1.52229 3.04459 6.08918 12.1784 24.3567 48.7134 97.4268
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0027 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.712 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  788.284 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0536-3401_X_dfm.log closed on Thu May 19 23:04:59 2016