! Started logfile: /scr/pima/bg219i_uvs/J0530+3723_X_dfm.log on Thu May 19 23:04:39 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0530+3723_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0530+3723_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.899729 visibilities/baseline/integration-bin.
! Found source: J0530+3723
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19920 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0530+3723_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.029919Jy  sigma=23.107576
! Fit after  self-cal, rms=0.769801Jy  sigma=17.151164
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7679 mas, bmaj=1.169 mas, bpa=-3.615 degrees
! Estimated noise=0.433422 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.174062 Jy
! Component: 100  -  total flux cleaned = 0.222929 Jy
! Total flux subtracted in 100 components = 0.222929 Jy
! Clean residual min=-0.008519 max=0.019586 Jy/beam
! Clean residual mean=-0.000006 rms=0.001856 Jy/beam
! Combined flux in latest and established models = 0.222929 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.222929 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078296Jy  sigma=1.635752
! Fit after  self-cal, rms=0.078016Jy  sigma=1.629529
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0202129 Jy
! Component: 100  -  total flux cleaned = 0.0293193 Jy
! Total flux subtracted in 100 components = 0.0293193 Jy
! Clean residual min=-0.005254 max=0.007910 Jy/beam
! Clean residual mean=-0.000010 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 0.252249 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 10 components and 0.252249 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072600Jy  sigma=1.472022
! Fit after  self-cal, rms=0.072574Jy  sigma=1.470828
! Inverting map 
! Added new window around map position (-1.6, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864058 Jy
! Component: 100  -  total flux cleaned = 0.0141985 Jy
! Total flux subtracted in 100 components = 0.0141985 Jy
! Clean residual min=-0.004776 max=0.006659 Jy/beam
! Clean residual mean=-0.000010 rms=0.001033 Jy/beam
! Combined flux in latest and established models = 0.266447 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 16 components and 0.266447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071525Jy  sigma=1.437914
! Fit after  self-cal, rms=0.071486Jy  sigma=1.436143
! Inverting map 
! Added new window around map position (-4.8, -6.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00601112 Jy
! Component: 100  -  total flux cleaned = 0.0101183 Jy
! Total flux subtracted in 100 components = 0.0101183 Jy
! Clean residual min=-0.004370 max=0.004843 Jy/beam
! Clean residual mean=-0.000008 rms=0.000929 Jy/beam
! Combined flux in latest and established models = 0.276565 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 24 components and 0.276566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070863Jy  sigma=1.417228
! Fit after  self-cal, rms=0.070846Jy  sigma=1.416972
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.998 mas, bmaj=1.455 mas, bpa=-3.147 degrees
! Estimated noise=0.234183 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533345 Jy
! Component: 100  -  total flux cleaned = 0.0089112 Jy
! Component: 150  -  total flux cleaned = 0.0116098 Jy
! Component: 200  -  total flux cleaned = 0.0137363 Jy
! Total flux subtracted in 200 components = 0.0137363 Jy
! Clean residual min=-0.003496 max=0.005026 Jy/beam
! Clean residual mean=-0.000009 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.290302 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 44 components and 0.290302 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070441Jy  sigma=1.402207
! Fit after  self-cal, rms=0.070414Jy  sigma=1.401543
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.998 x 1.455 at -3.147 degrees (North through East)
! Clean map  min=-0.0032827  max=0.23072 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.04     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.01     KP        0.97     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.98     KP        1.00     
!   LA        0.95     MK        1.03     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.99     KP        1.00     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        1.02     KP        1.00     
!   LA        0.97     MK        1.02     NL        1.00     OV        0.96     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.97     KP        0.98     
!   LA        0.95     MK        1.02     NL        1.02     OV        0.94     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.98     KP        0.99     
!   LA        0.97     MK        1.00     NL        0.98     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.96     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.08     HN        1.01     KP        0.99     
!   LA        0.96     MK        1.04     NL        0.99     OV        0.96     
!   PT        1.02     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.08     HN        0.96     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.00     OV        0.95     
!   PT        1.01     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.070414Jy  sigma=1.401543
! Fit after  self-cal, rms=0.070243Jy  sigma=1.386726
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.461 mas, bpa=-3.049 degrees
! Estimated noise=0.232519 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000397821 Jy
! Component: 100  -  total flux cleaned = 0.000857025 Jy
! Component: 150  -  total flux cleaned = 0.00113433 Jy
! Component: 200  -  total flux cleaned = 0.00127952 Jy
! Total flux subtracted in 200 components = 0.00127952 Jy
! Clean residual min=-0.002895 max=0.003925 Jy/beam
! Clean residual mean=-0.000004 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.291581 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.291581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070157Jy  sigma=1.384653
! Fit after  self-cal, rms=0.070187Jy  sigma=1.384510
! Inverting map 
! Added new window around map position (-4.4, 17.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349646 Jy
! Component: 100  -  total flux cleaned = 0.0048854 Jy
! Component: 150  -  total flux cleaned = 0.00537599 Jy
! Component: 200  -  total flux cleaned = 0.00584701 Jy
! Total flux subtracted in 200 components = 0.00584701 Jy
! Clean residual min=-0.002823 max=0.003296 Jy/beam
! Clean residual mean=-0.000003 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.297428 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 83 components and 0.297429 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069920Jy  sigma=1.380006
! Fit after  self-cal, rms=0.069902Jy  sigma=1.379307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069902Jy  sigma=1.379307
! Fit after  self-cal, rms=0.070887Jy  sigma=1.365387
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.457 mas, bpa=-3.225 degrees
! Estimated noise=0.233171 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00131734 Jy
! Component: 100  -  total flux cleaned = 0.00146284 Jy
! Component: 150  -  total flux cleaned = 0.00146682 Jy
! Component: 200  -  total flux cleaned = 0.00149264 Jy
! Total flux subtracted in 200 components = 0.00149264 Jy
! Clean residual min=-0.001637 max=0.001678 Jy/beam
! Clean residual mean=-0.000001 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.298921 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 93 components and 0.298921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070852Jy  sigma=1.364347
! Fit after  self-cal, rms=0.070882Jy  sigma=1.364237
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.93576e-05 Jy
! Component: 100  -  total flux cleaned = 9.8023e-05 Jy
! Component: 150  -  total flux cleaned = 5.85298e-05 Jy
! Component: 200  -  total flux cleaned = 5.89914e-05 Jy
! Total flux subtracted in 200 components = 5.89914e-05 Jy
! Clean residual min=-0.001593 max=0.001605 Jy/beam
! Clean residual mean=-0.000001 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.29898 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 99 components and 0.29898 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070871Jy  sigma=1.363950
! Fit after  self-cal, rms=0.070870Jy  sigma=1.363935
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070870Jy  sigma=1.363935
! Fit after  self-cal, rms=0.071046Jy  sigma=1.363880
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.456 mas, bpa=-3.278 degrees
! Estimated noise=0.233191 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.20178e-05 Jy
! Component: 100  -  total flux cleaned = 0.000114495 Jy
! Component: 150  -  total flux cleaned = 0.000151803 Jy
! Component: 200  -  total flux cleaned = 0.00013485 Jy
! Total flux subtracted in 200 components = 0.00013485 Jy
! Clean residual min=-0.001508 max=0.001603 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.299115 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 103 components and 0.299115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071035Jy  sigma=1.363596
! Fit after  self-cal, rms=0.071038Jy  sigma=1.363573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.7032e-07 Jy
! Component: 100  -  total flux cleaned = -1.52417e-05 Jy
! Component: 150  -  total flux cleaned = -4.47367e-05 Jy
! Component: 200  -  total flux cleaned = -5.79734e-05 Jy
! Total flux subtracted in 200 components = -5.79734e-05 Jy
! Clean residual min=-0.001488 max=0.001549 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.299057 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.299057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071032Jy  sigma=1.363422
! Fit after  self-cal, rms=0.071031Jy  sigma=1.363412
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071031Jy  sigma=1.363412
! Fit after  self-cal, rms=0.071113Jy  sigma=1.363367
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.107 mas, bmaj=2.527 mas, bpa=-3.524 degrees
! Estimated noise=0.295443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000207679 Jy
! Component: 100  -  total flux cleaned = 0.000451835 Jy
! Component: 150  -  total flux cleaned = 0.000668418 Jy
! Component: 200  -  total flux cleaned = 0.000769776 Jy
! Total flux subtracted in 200 components = 0.000769776 Jy
! Clean residual min=-0.001694 max=0.002037 Jy/beam
! Clean residual mean=0.000000 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.299827 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 119 components and 0.299827 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071113Jy  sigma=1.363278
! Fit after  self-cal, rms=0.071114Jy  sigma=1.363254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.4, 12.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209548 Jy
! Component: 100  -  total flux cleaned = 0.00306782 Jy
! Component: 150  -  total flux cleaned = 0.00362995 Jy
! Component: 200  -  total flux cleaned = 0.00391149 Jy
! Total flux subtracted in 200 components = 0.00391149 Jy
! Clean residual min=-0.001644 max=0.001554 Jy/beam
! Clean residual mean=-0.000003 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.303738 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 155 components and 0.303738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071059Jy  sigma=1.362289
! Fit after  self-cal, rms=0.071057Jy  sigma=1.362229
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.456 mas, bpa=-3.294 degrees
! Estimated noise=0.233201 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.004 x 1.456 at -3.294 degrees (North through East)
! Clean map  min=-0.001286  max=0.22888 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7714 mas, bmaj=1.168 mas, bpa=-3.885 degrees
! Estimated noise=0.432756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.173723 Jy
! Component: 100  -  total flux cleaned = 0.223658 Jy
! Component: 150  -  total flux cleaned = 0.243742 Jy
! Component: 200  -  total flux cleaned = 0.254427 Jy
! Total flux subtracted in 200 components = 0.254427 Jy
! Clean residual min=-0.003833 max=0.005763 Jy/beam
! Clean residual mean=-0.000005 rms=0.000968 Jy/beam
! Combined flux in latest and established models = 0.254427 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.254427 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.456 mas, bpa=-3.294 degrees
! Estimated noise=0.233201 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010066 Jy
! Component: 100  -  total flux cleaned = 0.0170694 Jy
! Component: 150  -  total flux cleaned = 0.0222284 Jy
! Component: 200  -  total flux cleaned = 0.0261627 Jy
! Total flux subtracted in 200 components = 0.0261627 Jy
! Clean residual min=-0.002470 max=0.002385 Jy/beam
! Clean residual mean=-0.000004 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.28059 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 30 components and 0.28059 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.107 mas, bmaj=2.527 mas, bpa=-3.524 degrees
! Estimated noise=0.295443 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00482177 Jy
! Component: 100  -  total flux cleaned = 0.00816058 Jy
! Component: 150  -  total flux cleaned = 0.0107795 Jy
! Component: 200  -  total flux cleaned = 0.0129409 Jy
! Total flux subtracted in 200 components = 0.0129409 Jy
! Clean residual min=-0.002041 max=0.001950 Jy/beam
! Clean residual mean=-0.000004 rms=0.000585 Jy/beam
! Combined flux in latest and established models = 0.293531 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001813 Jy
! Component: 100  -  total flux cleaned = 0.00330443 Jy
! Component: 150  -  total flux cleaned = 0.00433666 Jy
! Component: 200  -  total flux cleaned = 0.00520121 Jy
! Total flux subtracted in 200 components = 0.00520121 Jy
! Clean residual min=-0.001660 max=0.001722 Jy/beam
! Clean residual mean=-0.000004 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.298732 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 84 components and 0.298732 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.004 mas, bmaj=1.456 mas, bpa=-3.294 degrees
! Estimated noise=0.233201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103001 Jy
! Component: 100  -  total flux cleaned = 0.0017643 Jy
! Component: 150  -  total flux cleaned = 0.00242721 Jy
! Component: 200  -  total flux cleaned = 0.00284533 Jy
! Total flux subtracted in 200 components = 0.00284533 Jy
! Clean residual min=-0.001531 max=0.001672 Jy/beam
! Clean residual mean=-0.000002 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.301577 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 114 components and 0.301577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071093Jy  sigma=1.363480
! Fit after  self-cal, rms=0.071083Jy  sigma=1.363085
wmodel /J0530+3723_X_map.mod
! wmodel: Unable to open new model file: /J0530+3723_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0530+3723_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.004 x 1.456 at -3.294 degrees (North through East)
! Clean map  min=-0.0013288  max=0.22895 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0530+3723_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.228945 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000338326 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.443329 0.443329 0.886657 1.77331 3.54663 7.09326 14.1865 28.373 56.7461
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.228 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  676.699 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0530+3723_X_dfm.log closed on Thu May 19 23:04:43 2016