! Started logfile: /scr/pima/bg219i_uvs/J0459+3106_X_dfm.log on Thu May 19 23:03:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0459+3106_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0459+3106_X_uva.fits
! AN table 1: 41 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.910027 visibilities/baseline/integration-bin.
! Found source: J0459+3106
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20148 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0459+3106_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.019306Jy  sigma=23.027198
! Fit after  self-cal, rms=0.827844Jy  sigma=18.584362
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7735 mas, bmaj=1.223 mas, bpa=-8.176 degrees
! Estimated noise=0.478918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129925 Jy
! Component: 100  -  total flux cleaned = 0.170076 Jy
! Total flux subtracted in 100 components = 0.170076 Jy
! Clean residual min=-0.005680 max=0.015827 Jy/beam
! Clean residual mean=-0.000005 rms=0.001488 Jy/beam
! Combined flux in latest and established models = 0.170076 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.170076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074461Jy  sigma=1.520446
! Fit after  self-cal, rms=0.074365Jy  sigma=1.518751
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155276 Jy
! Component: 100  -  total flux cleaned = 0.0223895 Jy
! Total flux subtracted in 100 components = 0.0223895 Jy
! Clean residual min=-0.004366 max=0.004979 Jy/beam
! Clean residual mean=-0.000004 rms=0.000989 Jy/beam
! Combined flux in latest and established models = 0.192465 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.192465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071479Jy  sigma=1.414939
! Fit after  self-cal, rms=0.071476Jy  sigma=1.414802
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9997 mas, bmaj=1.594 mas, bpa=-5.824 degrees
! Estimated noise=0.232008 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-9.6, 15.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0050086 Jy
! Component: 100  -  total flux cleaned = 0.00694199 Jy
! Component: 150  -  total flux cleaned = 0.00790929 Jy
! Component: 200  -  total flux cleaned = 0.00816266 Jy
! Total flux subtracted in 200 components = 0.00816266 Jy
! Clean residual min=-0.002971 max=0.003715 Jy/beam
! Clean residual mean=-0.000005 rms=0.000768 Jy/beam
! Combined flux in latest and established models = 0.200628 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 24 components and 0.200628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071193Jy  sigma=1.403311
! Fit after  self-cal, rms=0.071185Jy  sigma=1.402802
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9997 x 1.594 at -5.824 degrees (North through East)
! Clean map  min=-0.0027864  max=0.17435 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.01     KP        1.01     
!   LA        0.96     MK        0.97     NL        0.99     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.08     HN        0.98     KP        0.98     
!   LA        0.97     MK        1.00     NL        0.97     OV        0.98     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.00     KP        1.01     
!   LA        0.97     MK        1.00     NL        0.98     OV        0.92     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.97     KP        1.00     
!   LA        0.97     MK        0.96     NL        0.99     OV        0.95     
!   PT        0.97     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.96     MK        1.00     NL        1.02     OV        0.96     
!   PT        1.01     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.04     HN        0.99     KP        1.00     
!   LA        0.99     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.96     KP        1.04     
!   LA        0.99     MK        0.97     NL        0.99     OV        0.96     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        0.98     KP        1.01     
!   LA        0.98     MK        1.01     NL        0.99     OV        0.95     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.02     KP        0.99     
!   LA        1.00     MK        1.02     NL        0.98     OV        0.97     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.01     KP        1.05     
!   LA        0.97     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        1.02     KP        1.01     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.99     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.01     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.071185Jy  sigma=1.402802
! Fit after  self-cal, rms=0.071432Jy  sigma=1.392069
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.599 mas, bpa=-6.212 degrees
! Estimated noise=0.22963 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.4157e-05 Jy
! Component: 100  -  total flux cleaned = -0.000182463 Jy
! Component: 150  -  total flux cleaned = -0.000266424 Jy
! Component: 200  -  total flux cleaned = -0.000307073 Jy
! Total flux subtracted in 200 components = -0.000307073 Jy
! Clean residual min=-0.002538 max=0.002699 Jy/beam
! Clean residual mean=-0.000003 rms=0.000630 Jy/beam
! Combined flux in latest and established models = 0.200321 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.200321 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071362Jy  sigma=1.391013
! Fit after  self-cal, rms=0.071408Jy  sigma=1.390929
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071408Jy  sigma=1.390929
! Fit after  self-cal, rms=0.073446Jy  sigma=1.380270
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.596 mas, bpa=-5.842 degrees
! Estimated noise=0.230255 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00126827 Jy
! Component: 100  -  total flux cleaned = -0.00193545 Jy
! Component: 150  -  total flux cleaned = -0.00216796 Jy
! Component: 200  -  total flux cleaned = -0.00227808 Jy
! Total flux subtracted in 200 components = -0.00227808 Jy
! Clean residual min=-0.001785 max=0.002407 Jy/beam
! Clean residual mean=-0.000001 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.198043 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 47 components and 0.198043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073419Jy  sigma=1.379620
! Fit after  self-cal, rms=0.073463Jy  sigma=1.379507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (6.2, 4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210043 Jy
! Component: 100  -  total flux cleaned = 0.00326045 Jy
! Component: 150  -  total flux cleaned = 0.00407012 Jy
! Component: 200  -  total flux cleaned = 0.00442032 Jy
! Total flux subtracted in 200 components = 0.00442032 Jy
! Clean residual min=-0.001559 max=0.001495 Jy/beam
! Clean residual mean=-0.000001 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.202463 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 71 components and 0.202463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073389Jy  sigma=1.377924
! Fit after  self-cal, rms=0.073384Jy  sigma=1.377837
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073384Jy  sigma=1.377837
! Fit after  self-cal, rms=0.073452Jy  sigma=1.377602
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.596 mas, bpa=-5.818 degrees
! Estimated noise=0.230042 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043675 Jy
! Component: 100  -  total flux cleaned = 0.00051284 Jy
! Component: 150  -  total flux cleaned = 0.000514006 Jy
! Component: 200  -  total flux cleaned = 0.000515029 Jy
! Total flux subtracted in 200 components = 0.000515029 Jy
! Clean residual min=-0.001455 max=0.001365 Jy/beam
! Clean residual mean=-0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.202978 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.202978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073433Jy  sigma=1.377270
! Fit after  self-cal, rms=0.073434Jy  sigma=1.377248
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.17261e-05 Jy
! Component: 100  -  total flux cleaned = 6.19286e-05 Jy
! Component: 150  -  total flux cleaned = 7.68857e-05 Jy
! Component: 200  -  total flux cleaned = 9.17552e-05 Jy
! Total flux subtracted in 200 components = 9.17552e-05 Jy
! Clean residual min=-0.001447 max=0.001345 Jy/beam
! Clean residual mean=-0.000001 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.20307 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 86 components and 0.20307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073426Jy  sigma=1.377116
! Fit after  self-cal, rms=0.073427Jy  sigma=1.377117
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073427Jy  sigma=1.377117
! Fit after  self-cal, rms=0.073427Jy  sigma=1.377050
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.161 mas, bmaj=2.671 mas, bpa=-5.573 degrees
! Estimated noise=0.288456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.30761e-05 Jy
! Component: 100  -  total flux cleaned = 3.62508e-05 Jy
! Component: 150  -  total flux cleaned = 8.00905e-05 Jy
! Component: 200  -  total flux cleaned = 0.000105439 Jy
! Total flux subtracted in 200 components = 0.000105439 Jy
! Clean residual min=-0.001520 max=0.001742 Jy/beam
! Clean residual mean=-0.000001 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.203175 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.203175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073425Jy  sigma=1.377012
! Fit after  self-cal, rms=0.073424Jy  sigma=1.377004
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.65604e-05 Jy
! Component: 100  -  total flux cleaned = 7.70551e-05 Jy
! Component: 150  -  total flux cleaned = 9.77714e-05 Jy
! Component: 200  -  total flux cleaned = 0.000107572 Jy
! Total flux subtracted in 200 components = 0.000107572 Jy
! Clean residual min=-0.001496 max=0.001719 Jy/beam
! Clean residual mean=-0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.203283 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 122 components and 0.203283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073424Jy  sigma=1.377010
! Fit after  self-cal, rms=0.073424Jy  sigma=1.377007
! Inverting map 
! Added new window around map position (-14.2, -13).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000595967 Jy
! Component: 100  -  total flux cleaned = 0.000977155 Jy
! Component: 150  -  total flux cleaned = 0.00116235 Jy
! Component: 200  -  total flux cleaned = 0.00128629 Jy
! Total flux subtracted in 200 components = 0.00128629 Jy
! Clean residual min=-0.001363 max=0.001438 Jy/beam
! Clean residual mean=-0.000002 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.204569 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 161 components and 0.204569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073382Jy  sigma=1.376186
! Fit after  self-cal, rms=0.073377Jy  sigma=1.376120
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.596 mas, bpa=-5.813 degrees
! Estimated noise=0.22992 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.596 at -5.813 degrees (North through East)
! Clean map  min=-0.0014288  max=0.17332 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.776 mas, bmaj=1.223 mas, bpa=-8.082 degrees
! Estimated noise=0.476194 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.129061 Jy
! Component: 100  -  total flux cleaned = 0.169098 Jy
! Component: 150  -  total flux cleaned = 0.184385 Jy
! Component: 200  -  total flux cleaned = 0.190994 Jy
! Total flux subtracted in 200 components = 0.190994 Jy
! Clean residual min=-0.003285 max=0.003710 Jy/beam
! Clean residual mean=-0.000001 rms=0.000775 Jy/beam
! Combined flux in latest and established models = 0.190994 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.190994 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.596 mas, bpa=-5.813 degrees
! Estimated noise=0.22992 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425715 Jy
! Component: 100  -  total flux cleaned = 0.00686345 Jy
! Component: 150  -  total flux cleaned = 0.0077406 Jy
! Component: 200  -  total flux cleaned = 0.00840872 Jy
! Total flux subtracted in 200 components = 0.00840872 Jy
! Clean residual min=-0.001484 max=0.001455 Jy/beam
! Clean residual mean=-0.000002 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.199402 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 29 components and 0.199402 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.161 mas, bmaj=2.671 mas, bpa=-5.573 degrees
! Estimated noise=0.288456 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00129232 Jy
! Component: 100  -  total flux cleaned = 0.00203064 Jy
! Component: 150  -  total flux cleaned = 0.00253376 Jy
! Component: 200  -  total flux cleaned = 0.00277946 Jy
! Total flux subtracted in 200 components = 0.00277946 Jy
! Clean residual min=-0.001533 max=0.001451 Jy/beam
! Clean residual mean=-0.000003 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.202182 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243243 Jy
! Component: 100  -  total flux cleaned = 0.000458657 Jy
! Component: 150  -  total flux cleaned = 0.000726294 Jy
! Component: 200  -  total flux cleaned = 0.000926921 Jy
! Total flux subtracted in 200 components = 0.000926921 Jy
! Clean residual min=-0.001470 max=0.001369 Jy/beam
! Clean residual mean=-0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.203109 Jy
! Adding 61 model components to the UV plane model.
! The established model now contains 87 components and 0.203109 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.002 mas, bmaj=1.596 mas, bpa=-5.813 degrees
! Estimated noise=0.22992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.99406e-05 Jy
! Component: 100  -  total flux cleaned = 5.99485e-05 Jy
! Component: 150  -  total flux cleaned = 2.3297e-05 Jy
! Component: 200  -  total flux cleaned = -4.46464e-05 Jy
! Total flux subtracted in 200 components = -4.46464e-05 Jy
! Clean residual min=-0.001350 max=0.001358 Jy/beam
! Clean residual mean=-0.000001 rms=0.000311 Jy/beam
! Combined flux in latest and established models = 0.203064 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 109 components and 0.203064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073408Jy  sigma=1.376865
! Fit after  self-cal, rms=0.073398Jy  sigma=1.376735
wmodel /J0459+3106_X_map.mod
! wmodel: Unable to open new model file: /J0459+3106_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0459+3106_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.002 x 1.596 at -5.813 degrees (North through East)
! Clean map  min=-0.0013519  max=0.17325 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0459+3106_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.173247 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000309203 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.535425 0.535425 1.07085 2.1417 4.2834 8.56681 17.1336 34.2672 68.5345
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.173 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  560.302 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0459+3106_X_dfm.log closed on Thu May 19 23:03:30 2016