! Started logfile: /scr/pima/bg219i_uvs/J0444+1042_X_dfm.log on Thu May 19 23:03:03 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0444+1042_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0444+1042_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.896154 visibilities/baseline/integration-bin.
! Found source: J0444+1042
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25164 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0444+1042_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.005422Jy  sigma=23.834514
! Fit after  self-cal, rms=0.902813Jy  sigma=21.306947
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7093 mas, bmaj=1.645 mas, bpa=-1.577 degrees
! Estimated noise=0.398623 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0721077 Jy
! Component: 100  -  total flux cleaned = 0.0955317 Jy
! Total flux subtracted in 100 components = 0.0955317 Jy
! Clean residual min=-0.004436 max=0.010051 Jy/beam
! Clean residual mean=-0.000018 rms=0.001299 Jy/beam
! Combined flux in latest and established models = 0.0955317 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0955317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071600Jy  sigma=1.578754
! Fit after  self-cal, rms=0.071298Jy  sigma=1.572892
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0115623 Jy
! Component: 100  -  total flux cleaned = 0.0181277 Jy
! Total flux subtracted in 100 components = 0.0181277 Jy
! Clean residual min=-0.004205 max=0.008156 Jy/beam
! Clean residual mean=-0.000014 rms=0.001011 Jy/beam
! Combined flux in latest and established models = 0.113659 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 22 components and 0.113659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068631Jy  sigma=1.492857
! Fit after  self-cal, rms=0.068608Jy  sigma=1.492181
! Inverting map 
! Added new window around map position (-1.2, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744054 Jy
! Component: 100  -  total flux cleaned = 0.012024 Jy
! Total flux subtracted in 100 components = 0.012024 Jy
! Clean residual min=-0.003981 max=0.004650 Jy/beam
! Clean residual mean=-0.000011 rms=0.000867 Jy/beam
! Combined flux in latest and established models = 0.125683 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 40 components and 0.125683 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067379Jy  sigma=1.456484
! Fit after  self-cal, rms=0.067263Jy  sigma=1.454296
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9026 mas, bmaj=1.95 mas, bpa=-4.29 degrees
! Estimated noise=0.203699 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1.6, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00884215 Jy
! Component: 100  -  total flux cleaned = 0.0151534 Jy
! Component: 150  -  total flux cleaned = 0.0202388 Jy
! Component: 200  -  total flux cleaned = 0.0245154 Jy
! Total flux subtracted in 200 components = 0.0245154 Jy
! Clean residual min=-0.003334 max=0.003875 Jy/beam
! Clean residual mean=-0.000012 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.150199 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 99 components and 0.150199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065653Jy  sigma=1.412063
! Fit after  self-cal, rms=0.065528Jy  sigma=1.409299
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9026 x 1.95 at -4.29 degrees (North through East)
! Clean map  min=-0.0029967  max=0.095082 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.05     KP        0.94     
!   LA        0.90     MK        1.02     NL        1.02     OV        1.00     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.97     
!   LA        0.93     MK        1.04     NL        0.99     OV        1.02     
!   PT        0.90     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        0.98     KP        0.94     
!   LA        0.91     MK        1.07     NL        1.00     OV        0.99     
!   PT        0.90     SC        1.07     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.00     KP        0.96     
!   LA        0.90     MK        1.03     NL        1.02     OV        0.98     
!   PT        0.90     SC        1.05     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.03     KP        0.96     
!   LA        0.92     MK        1.00     NL        1.01     OV        1.02     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        1.01     KP        0.96     
!   LA        0.91     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.90     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.99     KP        0.96     
!   LA        0.95     MK        1.08     NL        1.02     OV        0.99     
!   PT        0.94     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     HN        0.98     KP        0.95     
!   LA        0.93     MK        1.07     NL        1.00     OV        0.95     
!   PT        0.90     SC        1.07     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        0.98     KP        0.94     
!   LA        0.95     MK        0.99     NL        1.00     OV        1.04     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        1.03     KP        0.95     
!   LA        0.93     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.91     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.08     HN        0.99     KP        0.95     
!   LA        0.96     MK        1.03     NL        1.02     OV        0.98     
!   PT        0.91     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.12     HN        0.96     KP        0.94     
!   LA        0.92     MK        1.01     NL        1.06     OV        0.96     
!   PT        0.92     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.065528Jy  sigma=1.409299
! Fit after  self-cal, rms=0.064862Jy  sigma=1.393695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9157 mas, bmaj=1.976 mas, bpa=-4.121 degrees
! Estimated noise=0.199028 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00407757 Jy
! Component: 100  -  total flux cleaned = 0.00661069 Jy
! Component: 150  -  total flux cleaned = 0.00843918 Jy
! Component: 200  -  total flux cleaned = 0.0097003 Jy
! Total flux subtracted in 200 components = 0.0097003 Jy
! Clean residual min=-0.001984 max=0.002502 Jy/beam
! Clean residual mean=0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.159899 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 128 components and 0.159899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064576Jy  sigma=1.385205
! Fit after  self-cal, rms=0.064577Jy  sigma=1.384544
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064577Jy  sigma=1.384544
! Fit after  self-cal, rms=0.066669Jy  sigma=1.380186
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9181 mas, bmaj=1.979 mas, bpa=-4.169 degrees
! Estimated noise=0.199945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161822 Jy
! Component: 100  -  total flux cleaned = 0.00245745 Jy
! Component: 150  -  total flux cleaned = 0.00304459 Jy
! Component: 200  -  total flux cleaned = 0.00347199 Jy
! Total flux subtracted in 200 components = 0.00347199 Jy
! Clean residual min=-0.001730 max=0.001818 Jy/beam
! Clean residual mean=-0.000000 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.163371 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 138 components and 0.163371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066618Jy  sigma=1.378680
! Fit after  self-cal, rms=0.066644Jy  sigma=1.378487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21.2, -23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156672 Jy
! Component: 100  -  total flux cleaned = 0.00231295 Jy
! Component: 150  -  total flux cleaned = 0.00284348 Jy
! Component: 200  -  total flux cleaned = 0.00332096 Jy
! Total flux subtracted in 200 components = 0.00332096 Jy
! Clean residual min=-0.001634 max=0.001713 Jy/beam
! Clean residual mean=0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.166692 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 159 components and 0.166692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066599Jy  sigma=1.377250
! Fit after  self-cal, rms=0.066591Jy  sigma=1.377144
! Inverting map 
! Added new window around map position (-19.4, 31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015446 Jy
! Component: 100  -  total flux cleaned = 0.00212694 Jy
! Component: 150  -  total flux cleaned = 0.00257341 Jy
! Component: 200  -  total flux cleaned = 0.00293521 Jy
! Total flux subtracted in 200 components = 0.00293521 Jy
! Clean residual min=-0.001610 max=0.001442 Jy/beam
! Clean residual mean=0.000001 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.169627 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 174 components and 0.169627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066546Jy  sigma=1.376071
! Fit after  self-cal, rms=0.066539Jy  sigma=1.375947
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066539Jy  sigma=1.375947
! Fit after  self-cal, rms=0.066573Jy  sigma=1.375792
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9189 mas, bmaj=1.98 mas, bpa=-4.214 degrees
! Estimated noise=0.199897 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000429926 Jy
! Component: 100  -  total flux cleaned = 0.000826555 Jy
! Component: 150  -  total flux cleaned = 0.00116847 Jy
! Component: 200  -  total flux cleaned = 0.00139648 Jy
! Total flux subtracted in 200 components = 0.00139648 Jy
! Clean residual min=-0.001654 max=0.001344 Jy/beam
! Clean residual mean=-0.000000 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.171024 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 183 components and 0.171024 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066556Jy  sigma=1.375372
! Fit after  self-cal, rms=0.066556Jy  sigma=1.375316
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136196 Jy
! Component: 100  -  total flux cleaned = 0.000396292 Jy
! Component: 150  -  total flux cleaned = 0.000564074 Jy
! Component: 200  -  total flux cleaned = 0.000674212 Jy
! Total flux subtracted in 200 components = 0.000674212 Jy
! Clean residual min=-0.001634 max=0.001319 Jy/beam
! Clean residual mean=0.000000 rms=0.000327 Jy/beam
! Combined flux in latest and established models = 0.171698 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 188 components and 0.171698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066546Jy  sigma=1.375065
! Fit after  self-cal, rms=0.066543Jy  sigma=1.375028
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066543Jy  sigma=1.375028
! Fit after  self-cal, rms=0.066458Jy  sigma=1.374984
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=3.058 mas, bpa=-6.195 degrees
! Estimated noise=0.247282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000874945 Jy
! Component: 100  -  total flux cleaned = 0.00151785 Jy
! Component: 150  -  total flux cleaned = 0.00193705 Jy
! Component: 200  -  total flux cleaned = 0.00213606 Jy
! Total flux subtracted in 200 components = 0.00213606 Jy
! Clean residual min=-0.001655 max=0.001628 Jy/beam
! Clean residual mean=0.000001 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.173834 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 204 components and 0.173834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066455Jy  sigma=1.374816
! Fit after  self-cal, rms=0.066452Jy  sigma=1.374780
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000166494 Jy
! Component: 100  -  total flux cleaned = 0.000337566 Jy
! Component: 150  -  total flux cleaned = 0.000444603 Jy
! Component: 200  -  total flux cleaned = 0.000555814 Jy
! Total flux subtracted in 200 components = 0.000555814 Jy
! Clean residual min=-0.001653 max=0.001569 Jy/beam
! Clean residual mean=0.000001 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.17439 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 210 components and 0.17439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066451Jy  sigma=1.374729
! Fit after  self-cal, rms=0.066449Jy  sigma=1.374710
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9194 mas, bmaj=1.981 mas, bpa=-4.234 degrees
! Estimated noise=0.199781 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9194 x 1.981 at -4.234 degrees (North through East)
! Clean map  min=-0.0015108  max=0.0925 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7194 mas, bmaj=1.658 mas, bpa=-1.378 degrees
! Estimated noise=0.395148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714031 Jy
! Component: 100  -  total flux cleaned = 0.0957206 Jy
! Component: 150  -  total flux cleaned = 0.107307 Jy
! Component: 200  -  total flux cleaned = 0.114548 Jy
! Total flux subtracted in 200 components = 0.114548 Jy
! Clean residual min=-0.003442 max=0.004274 Jy/beam
! Clean residual mean=-0.000010 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.114548 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 23 model components to the UV plane model.
! The established model now contains 23 components and 0.114548 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9194 mas, bmaj=1.981 mas, bpa=-4.234 degrees
! Estimated noise=0.199781 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00931806 Jy
! Component: 100  -  total flux cleaned = 0.0163027 Jy
! Component: 150  -  total flux cleaned = 0.0218484 Jy
! Component: 200  -  total flux cleaned = 0.0264323 Jy
! Total flux subtracted in 200 components = 0.0264323 Jy
! Clean residual min=-0.002596 max=0.003132 Jy/beam
! Clean residual mean=-0.000009 rms=0.000735 Jy/beam
! Combined flux in latest and established models = 0.14098 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 75 components and 0.14098 Jy
! Inverting map 
! Added new window around map position (0, 6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00391838 Jy
! Component: 100  -  total flux cleaned = 0.0072219 Jy
! Component: 150  -  total flux cleaned = 0.0100576 Jy
! Component: 200  -  total flux cleaned = 0.0125214 Jy
! Total flux subtracted in 200 components = 0.0125214 Jy
! Clean residual min=-0.001999 max=0.002119 Jy/beam
! Clean residual mean=-0.000005 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.153502 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 113 components and 0.153502 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=3.058 mas, bpa=-6.195 degrees
! Estimated noise=0.247282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00396546 Jy
! Component: 100  -  total flux cleaned = 0.00685223 Jy
! Component: 150  -  total flux cleaned = 0.00914014 Jy
! Component: 200  -  total flux cleaned = 0.0110188 Jy
! Total flux subtracted in 200 components = 0.0110188 Jy
! Clean residual min=-0.002260 max=0.001943 Jy/beam
! Clean residual mean=-0.000004 rms=0.000589 Jy/beam
! Combined flux in latest and established models = 0.16452 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00156681 Jy
! Component: 100  -  total flux cleaned = 0.00289323 Jy
! Component: 150  -  total flux cleaned = 0.00402714 Jy
! Component: 200  -  total flux cleaned = 0.00500338 Jy
! Total flux subtracted in 200 components = 0.00500338 Jy
! Clean residual min=-0.001938 max=0.001601 Jy/beam
! Clean residual mean=-0.000002 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.169524 Jy
! Adding 119 model components to the UV plane model.
! The established model now contains 199 components and 0.169524 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9194 mas, bmaj=1.981 mas, bpa=-4.234 degrees
! Estimated noise=0.199781 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000966332 Jy
! Component: 100  -  total flux cleaned = 0.00155027 Jy
! Component: 150  -  total flux cleaned = 0.00190028 Jy
! Component: 200  -  total flux cleaned = 0.00223822 Jy
! Total flux subtracted in 200 components = 0.00223822 Jy
! Clean residual min=-0.001681 max=0.001245 Jy/beam
! Clean residual mean=-0.000001 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.171762 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 214 components and 0.171762 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066450Jy  sigma=1.374695
! Fit after  self-cal, rms=0.066428Jy  sigma=1.374353
wmodel /J0444+1042_X_map.mod
! wmodel: Unable to open new model file: /J0444+1042_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0444+1042_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9194 x 1.981 at -4.234 degrees (North through East)
! Clean map  min=-0.0015398  max=0.092624 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0444+1042_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0926239 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000308833 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00028 1.00028 2.00056 4.00113 8.00225 16.0045 32.009 64.018
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.092 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  299.915 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0444+1042_X_dfm.log closed on Thu May 19 23:03:06 2016