! Started logfile: /scr/pima/bg219i_uvs/J0440+1437_X_dfm.log on Thu May 19 23:02:47 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0440+1437_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0440+1437_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.909402 visibilities/baseline/integration-bin.
! Found source: J0440+1437
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25536 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0440+1437_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034376Jy  sigma=23.480419
! Fit after  self-cal, rms=0.755601Jy  sigma=17.030565
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7267 mas, bmaj=1.598 mas, bpa=-1.309 degrees
! Estimated noise=0.379797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.184614 Jy
! Component: 100  -  total flux cleaned = 0.238058 Jy
! Total flux subtracted in 100 components = 0.238058 Jy
! Clean residual min=-0.007779 max=0.022174 Jy/beam
! Clean residual mean=-0.000022 rms=0.002124 Jy/beam
! Combined flux in latest and established models = 0.238058 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.238058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078990Jy  sigma=1.682761
! Fit after  self-cal, rms=0.078824Jy  sigma=1.679054
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0232243 Jy
! Component: 100  -  total flux cleaned = 0.0347166 Jy
! Total flux subtracted in 100 components = 0.0347166 Jy
! Clean residual min=-0.005299 max=0.008869 Jy/beam
! Clean residual mean=-0.000013 rms=0.001211 Jy/beam
! Combined flux in latest and established models = 0.272775 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 13 components and 0.272775 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071849Jy  sigma=1.459675
! Fit after  self-cal, rms=0.071800Jy  sigma=1.458532
! Inverting map 
! Added new window around map position (-1.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00846031 Jy
! Component: 100  -  total flux cleaned = 0.0136146 Jy
! Total flux subtracted in 100 components = 0.0136146 Jy
! Clean residual min=-0.004300 max=0.005106 Jy/beam
! Clean residual mean=-0.000010 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.286389 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.286389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070918Jy  sigma=1.424229
! Fit after  self-cal, rms=0.070861Jy  sigma=1.422934
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9365 mas, bmaj=1.905 mas, bpa=-3.56 degrees
! Estimated noise=0.210047 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00449679 Jy
! Component: 100  -  total flux cleaned = 0.00716563 Jy
! Component: 150  -  total flux cleaned = 0.00886814 Jy
! Component: 200  -  total flux cleaned = 0.00940627 Jy
! Total flux subtracted in 200 components = 0.00940627 Jy
! Clean residual min=-0.003651 max=0.005023 Jy/beam
! Clean residual mean=-0.000006 rms=0.001084 Jy/beam
! Combined flux in latest and established models = 0.295796 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.295796 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070763Jy  sigma=1.411619
! Fit after  self-cal, rms=0.070747Jy  sigma=1.411273
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9365 x 1.905 at -3.56 degrees (North through East)
! Clean map  min=-0.0032777  max=0.24645 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.00     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.07     HN        1.00     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.01     OV        0.96     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.98     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.02     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        0.99     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.00     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.96     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.99     KP        0.99     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.01     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.09     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.94     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.08     HN        1.00     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.97     
!   PT        0.94     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.070747Jy  sigma=1.411273
! Fit after  self-cal, rms=0.070338Jy  sigma=1.394582
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9381 mas, bmaj=1.907 mas, bpa=-3.399 degrees
! Estimated noise=0.208574 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00127733 Jy
! Component: 100  -  total flux cleaned = -0.00179698 Jy
! Component: 150  -  total flux cleaned = -0.00213434 Jy
! Component: 200  -  total flux cleaned = -0.00231968 Jy
! Total flux subtracted in 200 components = -0.00231968 Jy
! Clean residual min=-0.003158 max=0.003285 Jy/beam
! Clean residual mean=-0.000004 rms=0.000901 Jy/beam
! Combined flux in latest and established models = 0.293476 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 49 components and 0.293476 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070247Jy  sigma=1.394169
! Fit after  self-cal, rms=0.070268Jy  sigma=1.394028
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070268Jy  sigma=1.394028
! Fit after  self-cal, rms=0.069327Jy  sigma=1.384130
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9403 mas, bmaj=1.911 mas, bpa=-3.389 degrees
! Estimated noise=0.206487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00261819 Jy
! Component: 100  -  total flux cleaned = -0.00377405 Jy
! Component: 150  -  total flux cleaned = -0.00436342 Jy
! Component: 200  -  total flux cleaned = -0.0046116 Jy
! Total flux subtracted in 200 components = -0.0046116 Jy
! Clean residual min=-0.002384 max=0.003475 Jy/beam
! Clean residual mean=-0.000004 rms=0.000765 Jy/beam
! Combined flux in latest and established models = 0.288864 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.288864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069137Jy  sigma=1.383331
! Fit after  self-cal, rms=0.069131Jy  sigma=1.383268
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6.2, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0029355 Jy
! Component: 100  -  total flux cleaned = 0.00333199 Jy
! Component: 150  -  total flux cleaned = 0.00349262 Jy
! Component: 200  -  total flux cleaned = 0.00358368 Jy
! Total flux subtracted in 200 components = 0.00358368 Jy
! Clean residual min=-0.002425 max=0.002983 Jy/beam
! Clean residual mean=-0.000003 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.292448 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 80 components and 0.292448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068891Jy  sigma=1.381048
! Fit after  self-cal, rms=0.068881Jy  sigma=1.380517
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068881Jy  sigma=1.380517
! Fit after  self-cal, rms=0.068818Jy  sigma=1.377298
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9401 mas, bmaj=1.911 mas, bpa=-3.419 degrees
! Estimated noise=0.205642 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00017305 Jy
! Component: 100  -  total flux cleaned = -5.31547e-05 Jy
! Component: 150  -  total flux cleaned = 2.0884e-05 Jy
! Component: 200  -  total flux cleaned = -9.63011e-06 Jy
! Total flux subtracted in 200 components = -9.63011e-06 Jy
! Clean residual min=-0.001899 max=0.002659 Jy/beam
! Clean residual mean=-0.000003 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.292438 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 90 components and 0.292438 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068704Jy  sigma=1.376891
! Fit after  self-cal, rms=0.068710Jy  sigma=1.376782
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000347102 Jy
! Component: 100  -  total flux cleaned = 0.000346115 Jy
! Component: 150  -  total flux cleaned = 0.000292126 Jy
! Component: 200  -  total flux cleaned = 0.000267543 Jy
! Total flux subtracted in 200 components = 0.000267543 Jy
! Clean residual min=-0.001941 max=0.002579 Jy/beam
! Clean residual mean=-0.000003 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.292706 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 103 components and 0.292706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068668Jy  sigma=1.376599
! Fit after  self-cal, rms=0.068669Jy  sigma=1.376559
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068669Jy  sigma=1.376559
! Fit after  self-cal, rms=0.068871Jy  sigma=1.372794
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.028 mas, bmaj=2.969 mas, bpa=-7.623 degrees
! Estimated noise=0.259083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.19868e-05 Jy
! Component: 100  -  total flux cleaned = 4.22906e-05 Jy
! Component: 150  -  total flux cleaned = 0.000189966 Jy
! Component: 200  -  total flux cleaned = 0.000288094 Jy
! Total flux subtracted in 200 components = 0.000288094 Jy
! Clean residual min=-0.002442 max=0.003614 Jy/beam
! Clean residual mean=-0.000007 rms=0.000840 Jy/beam
! Combined flux in latest and established models = 0.292994 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 113 components and 0.292994 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068863Jy  sigma=1.372796
! Fit after  self-cal, rms=0.068865Jy  sigma=1.372635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.65267e-05 Jy
! Component: 100  -  total flux cleaned = 6.07586e-05 Jy
! Component: 150  -  total flux cleaned = 8.18551e-05 Jy
! Component: 200  -  total flux cleaned = 0.000100327 Jy
! Total flux subtracted in 200 components = 0.000100327 Jy
! Clean residual min=-0.002408 max=0.003564 Jy/beam
! Clean residual mean=-0.000007 rms=0.000838 Jy/beam
! Combined flux in latest and established models = 0.293094 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 120 components and 0.293094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068867Jy  sigma=1.372784
! Fit after  self-cal, rms=0.068864Jy  sigma=1.372729
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=1.911 mas, bpa=-3.422 degrees
! Estimated noise=0.20527 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9395 x 1.911 at -3.422 degrees (North through East)
! Clean map  min=-0.0016591  max=0.24097 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.729 mas, bmaj=1.601 mas, bpa=-1.202 degrees
! Estimated noise=0.371714 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.18044 Jy
! Component: 100  -  total flux cleaned = 0.23356 Jy
! Component: 150  -  total flux cleaned = 0.255716 Jy
! Component: 200  -  total flux cleaned = 0.2669 Jy
! Total flux subtracted in 200 components = 0.2669 Jy
! Clean residual min=-0.003570 max=0.005813 Jy/beam
! Clean residual mean=-0.000010 rms=0.000900 Jy/beam
! Combined flux in latest and established models = 0.2669 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.2669 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=1.911 mas, bpa=-3.422 degrees
! Estimated noise=0.20527 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.009272 Jy
! Component: 100  -  total flux cleaned = 0.0149296 Jy
! Component: 150  -  total flux cleaned = 0.0186658 Jy
! Component: 200  -  total flux cleaned = 0.0212621 Jy
! Total flux subtracted in 200 components = 0.0212621 Jy
! Clean residual min=-0.001928 max=0.002833 Jy/beam
! Clean residual mean=-0.000004 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.288162 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 29 components and 0.288162 Jy
! Inverting map 
! Added new window around map position (-7.6, -28.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00245351 Jy
! Component: 100  -  total flux cleaned = 0.00359908 Jy
! Component: 150  -  total flux cleaned = 0.00432156 Jy
! Component: 200  -  total flux cleaned = 0.00499568 Jy
! Total flux subtracted in 200 components = 0.00499568 Jy
! Clean residual min=-0.001884 max=0.002161 Jy/beam
! Clean residual mean=-0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.293157 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 50 components and 0.293157 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.028 mas, bmaj=2.969 mas, bpa=-7.623 degrees
! Estimated noise=0.259083 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175959 Jy
! Component: 100  -  total flux cleaned = 0.00238865 Jy
! Component: 150  -  total flux cleaned = 0.00260941 Jy
! Component: 200  -  total flux cleaned = 0.00272862 Jy
! Total flux subtracted in 200 components = 0.00272862 Jy
! Clean residual min=-0.002558 max=0.003112 Jy/beam
! Clean residual mean=-0.000006 rms=0.000829 Jy/beam
! Combined flux in latest and established models = 0.295886 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105994 Jy
! Component: 100  -  total flux cleaned = 0.000201562 Jy
! Component: 150  -  total flux cleaned = 0.000200859 Jy
! Component: 200  -  total flux cleaned = 0.000173749 Jy
! Total flux subtracted in 200 components = 0.000173749 Jy
! Clean residual min=-0.002618 max=0.003058 Jy/beam
! Clean residual mean=-0.000006 rms=0.000814 Jy/beam
! Combined flux in latest and established models = 0.29606 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 83 components and 0.29606 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9395 mas, bmaj=1.911 mas, bpa=-3.422 degrees
! Estimated noise=0.20527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.33207e-05 Jy
! Component: 100  -  total flux cleaned = -4.35266e-05 Jy
! Component: 150  -  total flux cleaned = -0.00013235 Jy
! Component: 200  -  total flux cleaned = -0.000215001 Jy
! Total flux subtracted in 200 components = -0.000215001 Jy
! Clean residual min=-0.001808 max=0.002160 Jy/beam
! Clean residual mean=-0.000003 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.295845 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 96 components and 0.295845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068783Jy  sigma=1.372343
! Fit after  self-cal, rms=0.068777Jy  sigma=1.372039
wmodel /J0440+1437_X_map.mod
! wmodel: Unable to open new model file: /J0440+1437_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0440+1437_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9395 x 1.911 at -3.422 degrees (North through East)
! Clean map  min=-0.0016491  max=0.24 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0440+1437_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.240004 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000493996 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.617485 0.617485 1.23497 2.46994 4.93988 9.87977 19.7595 39.5191 79.0381
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.24 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  485.841 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0440+1437_X_dfm.log closed on Thu May 19 23:02:50 2016