! Started logfile: /scr/pima/bg219i_uvs/J0354+6621_X_dfm.log on Thu May 19 23:01:40 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0354+6621_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0354+6621_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.908772 visibilities/baseline/integration-bin.
! Found source: J0354+6621
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27972 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0354+6621_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013179Jy  sigma=24.010792
! Fit after  self-cal, rms=0.871653Jy  sigma=20.613866
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.692 mas, bmaj=1.237 mas, bpa=-77.1 degrees
! Estimated noise=0.461403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0969194 Jy
! Component: 100  -  total flux cleaned = 0.120802 Jy
! Total flux subtracted in 100 components = 0.120802 Jy
! Clean residual min=-0.004536 max=0.009651 Jy/beam
! Clean residual mean=-0.000013 rms=0.001137 Jy/beam
! Combined flux in latest and established models = 0.120802 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.120802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065506Jy  sigma=1.468509
! Fit after  self-cal, rms=0.065392Jy  sigma=1.465391
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010235 Jy
! Component: 100  -  total flux cleaned = 0.0161978 Jy
! Total flux subtracted in 100 components = 0.0161978 Jy
! Clean residual min=-0.004187 max=0.007179 Jy/beam
! Clean residual mean=-0.000007 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.137 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 13 components and 0.137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063289Jy  sigma=1.409433
! Fit after  self-cal, rms=0.063283Jy  sigma=1.408900
! Inverting map 
! Added new window around map position (1.2, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00657736 Jy
! Component: 100  -  total flux cleaned = 0.0102333 Jy
! Total flux subtracted in 100 components = 0.0102333 Jy
! Clean residual min=-0.003681 max=0.003270 Jy/beam
! Clean residual mean=-0.000003 rms=0.000795 Jy/beam
! Combined flux in latest and established models = 0.147233 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 17 components and 0.147233 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062605Jy  sigma=1.390668
! Fit after  self-cal, rms=0.062553Jy  sigma=1.389459
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9267 mas, bmaj=1.617 mas, bpa=-78.43 degrees
! Estimated noise=0.185821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347537 Jy
! Component: 100  -  total flux cleaned = 0.0053379 Jy
! Component: 150  -  total flux cleaned = 0.00645162 Jy
! Component: 200  -  total flux cleaned = 0.00673413 Jy
! Total flux subtracted in 200 components = 0.00673413 Jy
! Clean residual min=-0.001667 max=0.002883 Jy/beam
! Clean residual mean=-0.000001 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.153967 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 25 components and 0.153967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062375Jy  sigma=1.384439
! Fit after  self-cal, rms=0.062358Jy  sigma=1.384067
! Inverting map 
! Added new window around map position (4.2, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026168 Jy
! Component: 100  -  total flux cleaned = 0.00409977 Jy
! Component: 150  -  total flux cleaned = 0.00519062 Jy
! Component: 200  -  total flux cleaned = 0.00592396 Jy
! Total flux subtracted in 200 components = 0.00592396 Jy
! Clean residual min=-0.001434 max=0.001517 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.159891 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 44 components and 0.159891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062236Jy  sigma=1.381030
! Fit after  self-cal, rms=0.062225Jy  sigma=1.380782
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9267 x 1.617 at -78.43 degrees (North through East)
! Clean map  min=-0.0013564  max=0.12719 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.00     KP        0.98     
!   LA        0.97     MK        1.04     NL        1.01     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        0.97     
!   LA        1.00     MK        1.03     NL        1.03     OV        1.00     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.02     OV        0.99     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        0.96     KP        1.03     
!   LA        1.03     MK        1.01     NL        1.01     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        0.97     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.98     
!   PT        1.01     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.00     
!   LA        1.01     MK        1.04     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.96     KP        1.02     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        1.04     
!   LA        1.01     MK        0.97     NL        1.01     OV        0.97     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.04     NL        1.03     OV        0.98     
!   PT        1.01     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.01     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.00     OV        0.98     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.96     
!   PT        0.97     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.062225Jy  sigma=1.380782
! Fit after  self-cal, rms=0.061764Jy  sigma=1.377566
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9256 mas, bmaj=1.615 mas, bpa=-78.67 degrees
! Estimated noise=0.185215 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00089423 Jy
! Component: 100  -  total flux cleaned = 0.00121229 Jy
! Component: 150  -  total flux cleaned = 0.00139629 Jy
! Component: 200  -  total flux cleaned = 0.00156851 Jy
! Total flux subtracted in 200 components = 0.00156851 Jy
! Clean residual min=-0.001299 max=0.001294 Jy/beam
! Clean residual mean=0.000002 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.16146 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 58 components and 0.16146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061741Jy  sigma=1.377020
! Fit after  self-cal, rms=0.061741Jy  sigma=1.376917
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061741Jy  sigma=1.376917
! Fit after  self-cal, rms=0.061779Jy  sigma=1.374369
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.925 mas, bmaj=1.612 mas, bpa=-78.79 degrees
! Estimated noise=0.185337 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.55888e-05 Jy
! Component: 100  -  total flux cleaned = 0.000183228 Jy
! Component: 150  -  total flux cleaned = 0.000424081 Jy
! Component: 200  -  total flux cleaned = 0.000539447 Jy
! Total flux subtracted in 200 components = 0.000539447 Jy
! Clean residual min=-0.001265 max=0.001202 Jy/beam
! Clean residual mean=-0.000001 rms=0.000263 Jy/beam
! Combined flux in latest and established models = 0.161999 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.161999 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061769Jy  sigma=1.374106
! Fit after  self-cal, rms=0.061770Jy  sigma=1.374025
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.00202e-05 Jy
! Component: 100  -  total flux cleaned = 0.000169935 Jy
! Component: 150  -  total flux cleaned = 0.00029142 Jy
! Component: 200  -  total flux cleaned = 0.000358983 Jy
! Total flux subtracted in 200 components = 0.000358983 Jy
! Clean residual min=-0.001201 max=0.001203 Jy/beam
! Clean residual mean=-0.000000 rms=0.000260 Jy/beam
! Combined flux in latest and established models = 0.162358 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 74 components and 0.162358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061765Jy  sigma=1.373877
! Fit after  self-cal, rms=0.061762Jy  sigma=1.373837
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061762Jy  sigma=1.373837
! Fit after  self-cal, rms=0.061760Jy  sigma=1.373818
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=1.612 mas, bpa=-78.86 degrees
! Estimated noise=0.185289 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000128359 Jy
! Component: 100  -  total flux cleaned = 6.70396e-05 Jy
! Component: 150  -  total flux cleaned = 0.000161187 Jy
! Component: 200  -  total flux cleaned = 0.000203476 Jy
! Total flux subtracted in 200 components = 0.000203476 Jy
! Clean residual min=-0.001151 max=0.001206 Jy/beam
! Clean residual mean=-0.000001 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.162562 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.162562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061756Jy  sigma=1.373705
! Fit after  self-cal, rms=0.061755Jy  sigma=1.373677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-48.8, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100133 Jy
! Component: 100  -  total flux cleaned = 0.00124553 Jy
! Component: 150  -  total flux cleaned = 0.00130538 Jy
! Component: 200  -  total flux cleaned = 0.00133196 Jy
! Total flux subtracted in 200 components = 0.00133196 Jy
! Clean residual min=-0.001105 max=0.001067 Jy/beam
! Clean residual mean=-0.000001 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.163894 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 95 components and 0.163894 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061738Jy  sigma=1.373231
! Fit after  self-cal, rms=0.061735Jy  sigma=1.373190
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061735Jy  sigma=1.373190
! Fit after  self-cal, rms=0.061722Jy  sigma=1.373167
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.069 mas, bmaj=2.9 mas, bpa=-87.43 degrees
! Estimated noise=0.235178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152491 Jy
! Component: 100  -  total flux cleaned = 0.000339038 Jy
! Component: 150  -  total flux cleaned = 0.000431426 Jy
! Component: 200  -  total flux cleaned = 0.000465791 Jy
! Total flux subtracted in 200 components = 0.000465791 Jy
! Clean residual min=-0.001146 max=0.001261 Jy/beam
! Clean residual mean=-0.000001 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.164359 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 113 components and 0.164359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061720Jy  sigma=1.373086
! Fit after  self-cal, rms=0.061719Jy  sigma=1.373063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (23.2, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0010475 Jy
! Component: 100  -  total flux cleaned = 0.00120186 Jy
! Component: 150  -  total flux cleaned = 0.00126424 Jy
! Component: 200  -  total flux cleaned = 0.00133315 Jy
! Total flux subtracted in 200 components = 0.00133315 Jy
! Clean residual min=-0.001106 max=0.000925 Jy/beam
! Clean residual mean=-0.000003 rms=0.000267 Jy/beam
! Combined flux in latest and established models = 0.165692 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 137 components and 0.165693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061705Jy  sigma=1.372736
! Fit after  self-cal, rms=0.061702Jy  sigma=1.372701
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=1.611 mas, bpa=-78.91 degrees
! Estimated noise=0.185228 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 1.611 at -78.91 degrees (North through East)
! Clean map  min=-0.00095406  max=0.12702 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.691 mas, bmaj=1.233 mas, bpa=-77.54 degrees
! Estimated noise=0.459344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0963171 Jy
! Component: 100  -  total flux cleaned = 0.120774 Jy
! Component: 150  -  total flux cleaned = 0.131999 Jy
! Component: 200  -  total flux cleaned = 0.138633 Jy
! Total flux subtracted in 200 components = 0.138633 Jy
! Clean residual min=-0.003358 max=0.003723 Jy/beam
! Clean residual mean=-0.000007 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.138633 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.138633 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=1.611 mas, bpa=-78.91 degrees
! Estimated noise=0.185228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00629707 Jy
! Component: 100  -  total flux cleaned = 0.0100838 Jy
! Component: 150  -  total flux cleaned = 0.012882 Jy
! Component: 200  -  total flux cleaned = 0.0150057 Jy
! Total flux subtracted in 200 components = 0.0150057 Jy
! Clean residual min=-0.001381 max=0.001557 Jy/beam
! Clean residual mean=-0.000005 rms=0.000333 Jy/beam
! Combined flux in latest and established models = 0.153639 Jy
! Adding 29 model components to the UV plane model.
! The established model now contains 34 components and 0.153639 Jy
! Inverting map 
! Added new window around map position (1.4, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00180168 Jy
! Component: 100  -  total flux cleaned = 0.00325604 Jy
! Component: 150  -  total flux cleaned = 0.00448955 Jy
! Component: 200  -  total flux cleaned = 0.0055518 Jy
! Total flux subtracted in 200 components = 0.0055518 Jy
! Clean residual min=-0.001183 max=0.001070 Jy/beam
! Clean residual mean=-0.000003 rms=0.000261 Jy/beam
! Combined flux in latest and established models = 0.159191 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 64 components and 0.159191 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.069 mas, bmaj=2.9 mas, bpa=-87.43 degrees
! Estimated noise=0.235178 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150171 Jy
! Component: 100  -  total flux cleaned = 0.00243595 Jy
! Component: 150  -  total flux cleaned = 0.00311336 Jy
! Component: 200  -  total flux cleaned = 0.00367219 Jy
! Total flux subtracted in 200 components = 0.00367219 Jy
! Clean residual min=-0.001161 max=0.000962 Jy/beam
! Clean residual mean=-0.000005 rms=0.000284 Jy/beam
! Combined flux in latest and established models = 0.162863 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475148 Jy
! Component: 100  -  total flux cleaned = 0.000884881 Jy
! Component: 150  -  total flux cleaned = 0.00126171 Jy
! Component: 200  -  total flux cleaned = 0.00159594 Jy
! Total flux subtracted in 200 components = 0.00159594 Jy
! Clean residual min=-0.001081 max=0.000912 Jy/beam
! Clean residual mean=-0.000004 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.164459 Jy
! Adding 81 model components to the UV plane model.
! The established model now contains 127 components and 0.164459 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9253 mas, bmaj=1.611 mas, bpa=-78.91 degrees
! Estimated noise=0.185228 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.53383e-05 Jy
! Component: 100  -  total flux cleaned = 0.000198308 Jy
! Component: 150  -  total flux cleaned = 0.000290128 Jy
! Component: 200  -  total flux cleaned = 0.000477011 Jy
! Total flux subtracted in 200 components = 0.000477011 Jy
! Clean residual min=-0.001052 max=0.000905 Jy/beam
! Clean residual mean=-0.000002 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.164936 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 147 components and 0.164936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061698Jy  sigma=1.372574
! Fit after  self-cal, rms=0.061692Jy  sigma=1.372497
wmodel /J0354+6621_X_map.mod
! wmodel: Unable to open new model file: /J0354+6621_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0354+6621_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9253 x 1.611 at -78.91 degrees (North through East)
! Clean map  min=-0.00096758  max=0.12749 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0354+6621_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.127488 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000221842 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.522033 0.522033 1.04407 2.08813 4.17626 8.35253 16.7051 33.4101 66.8202
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.127 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  574.676 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0354+6621_X_dfm.log closed on Thu May 19 23:01:43 2016