! Started logfile: /scr/pima/bg219i_uvs/J0349+2104_X_dfm.log on Thu May 19 23:01:31 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0349+2104_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0349+2104_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.870565 visibilities/baseline/integration-bin.
! Found source: J0349+2104
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26796 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0349+2104_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006486Jy  sigma=23.607845
! Fit after  self-cal, rms=0.907771Jy  sigma=21.239184
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8389 mas, bmaj=1.367 mas, bpa=-4.07 degrees
! Estimated noise=0.410893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0677103 Jy
! Component: 100  -  total flux cleaned = 0.0864791 Jy
! Total flux subtracted in 100 components = 0.0864791 Jy
! Clean residual min=-0.004064 max=0.008529 Jy/beam
! Clean residual mean=0.000006 rms=0.001100 Jy/beam
! Combined flux in latest and established models = 0.086479 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.086479 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067460Jy  sigma=1.473660
! Fit after  self-cal, rms=0.067159Jy  sigma=1.466952
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.010133 Jy
! Component: 100  -  total flux cleaned = 0.0158656 Jy
! Total flux subtracted in 100 components = 0.0158656 Jy
! Clean residual min=-0.003069 max=0.003518 Jy/beam
! Clean residual mean=0.000006 rms=0.000807 Jy/beam
! Combined flux in latest and established models = 0.102345 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 15 components and 0.102345 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065205Jy  sigma=1.410497
! Fit after  self-cal, rms=0.065202Jy  sigma=1.409965
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.1 mas, bmaj=1.701 mas, bpa=-2.865 degrees
! Estimated noise=0.191113 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00519374 Jy
! Component: 100  -  total flux cleaned = 0.00767367 Jy
! Component: 150  -  total flux cleaned = 0.00910811 Jy
! Component: 200  -  total flux cleaned = 0.00999951 Jy
! Total flux subtracted in 200 components = 0.00999951 Jy
! Clean residual min=-0.002555 max=0.005445 Jy/beam
! Clean residual mean=0.000010 rms=0.000826 Jy/beam
! Combined flux in latest and established models = 0.112344 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 40 components and 0.112344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064867Jy  sigma=1.399205
! Fit after  self-cal, rms=0.064876Jy  sigma=1.399050
! Inverting map 
! Added new window around map position (8, 25).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567087 Jy
! Component: 100  -  total flux cleaned = 0.00921009 Jy
! Component: 150  -  total flux cleaned = 0.0117458 Jy
! Component: 200  -  total flux cleaned = 0.0136642 Jy
! Total flux subtracted in 200 components = 0.0136642 Jy
! Clean residual min=-0.002143 max=0.002381 Jy/beam
! Clean residual mean=0.000007 rms=0.000553 Jy/beam
! Combined flux in latest and established models = 0.126008 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 78 components and 0.126008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064324Jy  sigma=1.384198
! Fit after  self-cal, rms=0.064272Jy  sigma=1.382789
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.1 x 1.701 at -2.865 degrees (North through East)
! Clean map  min=-0.0019205  max=0.093903 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.04     KP        0.95     
!   LA        0.94     MK        1.06     NL        0.98     OV        0.98     
!   PT        1.01     SC        1.10     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.94     
!   LA        0.97     MK        1.08     NL        0.98     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.00     KP        0.96     
!   LA        0.95     MK        1.05     NL        0.98     OV        0.95     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        0.98     
!   LA        0.97     MK        1.09     NL        1.02     OV        0.94     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        0.92     KP        0.96     
!   LA        0.99     MK        1.00     NL        0.98     OV        0.99     
!   PT        1.04     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        0.99     
!   LA        1.01     MK        1.02     NL        1.00     OV        1.01     
!   PT        1.02     SC        1.05     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        0.99     KP        0.96     
!   LA        1.02     MK        1.02     NL        1.00     OV        1.01     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.94     KP        1.02     
!   LA        1.03     MK        1.03     NL        0.93     OV        0.94     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.92     KP        0.96     
!   LA        1.02     MK        1.01     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.07     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.03     KP        1.00     
!   LA        1.00     MK        1.00     NL        0.98     OV        0.98     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        0.95     KP        0.98     
!   LA        1.02     MK        1.04     NL        1.02     OV        0.95     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.064272Jy  sigma=1.382789
! Fit after  self-cal, rms=0.064537Jy  sigma=1.378833
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.111 mas, bmaj=1.714 mas, bpa=-2.823 degrees
! Estimated noise=0.190628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0020105 Jy
! Component: 100  -  total flux cleaned = 0.00344585 Jy
! Component: 150  -  total flux cleaned = 0.00456566 Jy
! Component: 200  -  total flux cleaned = 0.00547954 Jy
! Total flux subtracted in 200 components = 0.00547954 Jy
! Clean residual min=-0.001693 max=0.001912 Jy/beam
! Clean residual mean=0.000005 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.131488 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 96 components and 0.131488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064457Jy  sigma=1.376577
! Fit after  self-cal, rms=0.064476Jy  sigma=1.376294
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064476Jy  sigma=1.376294
! Fit after  self-cal, rms=0.064824Jy  sigma=1.374519
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.706 mas, bpa=-2.841 degrees
! Estimated noise=0.190772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105378 Jy
! Component: 100  -  total flux cleaned = 0.00185193 Jy
! Component: 150  -  total flux cleaned = 0.00242838 Jy
! Component: 200  -  total flux cleaned = 0.00278792 Jy
! Total flux subtracted in 200 components = 0.00278792 Jy
! Clean residual min=-0.001501 max=0.001798 Jy/beam
! Clean residual mean=0.000004 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.134276 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.134276 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064800Jy  sigma=1.373842
! Fit after  self-cal, rms=0.064811Jy  sigma=1.373745
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.4, 12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178293 Jy
! Component: 100  -  total flux cleaned = 0.00225604 Jy
! Component: 150  -  total flux cleaned = 0.00282714 Jy
! Component: 200  -  total flux cleaned = 0.00329935 Jy
! Total flux subtracted in 200 components = 0.00329935 Jy
! Clean residual min=-0.001405 max=0.001645 Jy/beam
! Clean residual mean=0.000004 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.137575 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 121 components and 0.137575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064751Jy  sigma=1.372286
! Fit after  self-cal, rms=0.064748Jy  sigma=1.372202
! Inverting map 
! Added new window around map position (10.4, 27).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00155827 Jy
! Component: 100  -  total flux cleaned = 0.00256174 Jy
! Component: 150  -  total flux cleaned = 0.00338123 Jy
! Component: 200  -  total flux cleaned = 0.00407929 Jy
! Total flux subtracted in 200 components = 0.00407929 Jy
! Clean residual min=-0.001332 max=0.001336 Jy/beam
! Clean residual mean=0.000004 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.141654 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 132 components and 0.141654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064698Jy  sigma=1.371021
! Fit after  self-cal, rms=0.064695Jy  sigma=1.370950
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064695Jy  sigma=1.370950
! Fit after  self-cal, rms=0.064686Jy  sigma=1.370805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.11 mas, bmaj=1.704 mas, bpa=-2.655 degrees
! Estimated noise=0.190632 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000802068 Jy
! Component: 100  -  total flux cleaned = 0.00142576 Jy
! Component: 150  -  total flux cleaned = 0.00193245 Jy
! Component: 200  -  total flux cleaned = 0.0023508 Jy
! Total flux subtracted in 200 components = 0.0023508 Jy
! Clean residual min=-0.001272 max=0.001284 Jy/beam
! Clean residual mean=0.000003 rms=0.000322 Jy/beam
! Combined flux in latest and established models = 0.144005 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 144 components and 0.144005 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064668Jy  sigma=1.370383
! Fit after  self-cal, rms=0.064668Jy  sigma=1.370363
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000482184 Jy
! Component: 100  -  total flux cleaned = 0.000818513 Jy
! Component: 150  -  total flux cleaned = 0.00109672 Jy
! Component: 200  -  total flux cleaned = 0.00129297 Jy
! Total flux subtracted in 200 components = 0.00129297 Jy
! Clean residual min=-0.001261 max=0.001301 Jy/beam
! Clean residual mean=0.000003 rms=0.000316 Jy/beam
! Combined flux in latest and established models = 0.145298 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 150 components and 0.145298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064659Jy  sigma=1.370154
! Fit after  self-cal, rms=0.064660Jy  sigma=1.370150
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064660Jy  sigma=1.370150
! Fit after  self-cal, rms=0.064685Jy  sigma=1.370121
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=2.758 mas, bpa=-2.994 degrees
! Estimated noise=0.224312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000992688 Jy
! Component: 100  -  total flux cleaned = 0.00172666 Jy
! Component: 150  -  total flux cleaned = 0.00229112 Jy
! Component: 200  -  total flux cleaned = 0.00270539 Jy
! Total flux subtracted in 200 components = 0.00270539 Jy
! Clean residual min=-0.001373 max=0.001846 Jy/beam
! Clean residual mean=0.000006 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.148004 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 158 components and 0.148004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064682Jy  sigma=1.370006
! Fit after  self-cal, rms=0.064679Jy  sigma=1.369951
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-31.2, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123856 Jy
! Component: 100  -  total flux cleaned = 0.00142345 Jy
! Component: 150  -  total flux cleaned = 0.00163144 Jy
! Component: 200  -  total flux cleaned = 0.0018296 Jy
! Total flux subtracted in 200 components = 0.0018296 Jy
! Clean residual min=-0.001264 max=0.001446 Jy/beam
! Clean residual mean=0.000004 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.149833 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 184 components and 0.149833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064659Jy  sigma=1.369371
! Fit after  self-cal, rms=0.064654Jy  sigma=1.369302
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.703 mas, bpa=-2.557 degrees
! Estimated noise=0.19075 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.109 x 1.703 at -2.557 degrees (North through East)
! Clean map  min=-0.0010519  max=0.093551 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8463 mas, bmaj=1.369 mas, bpa=-3.837 degrees
! Estimated noise=0.413437 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0680197 Jy
! Component: 100  -  total flux cleaned = 0.0871967 Jy
! Component: 150  -  total flux cleaned = 0.0971835 Jy
! Component: 200  -  total flux cleaned = 0.103046 Jy
! Total flux subtracted in 200 components = 0.103046 Jy
! Clean residual min=-0.003304 max=0.003719 Jy/beam
! Clean residual mean=0.000006 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.103046 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.103046 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.703 mas, bpa=-2.557 degrees
! Estimated noise=0.19075 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00656038 Jy
! Component: 100  -  total flux cleaned = 0.0113496 Jy
! Component: 150  -  total flux cleaned = 0.0151347 Jy
! Component: 200  -  total flux cleaned = 0.0182257 Jy
! Total flux subtracted in 200 components = 0.0182257 Jy
! Clean residual min=-0.002021 max=0.002342 Jy/beam
! Clean residual mean=0.000008 rms=0.000580 Jy/beam
! Combined flux in latest and established models = 0.121272 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 60 components and 0.121272 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=2.758 mas, bpa=-2.994 degrees
! Estimated noise=0.224312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427076 Jy
! Component: 100  -  total flux cleaned = 0.00735464 Jy
! Component: 150  -  total flux cleaned = 0.00996384 Jy
! Component: 200  -  total flux cleaned = 0.0122501 Jy
! Total flux subtracted in 200 components = 0.0122501 Jy
! Clean residual min=-0.002049 max=0.002140 Jy/beam
! Clean residual mean=0.000011 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.133522 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200905 Jy
! Component: 100  -  total flux cleaned = 0.00357006 Jy
! Component: 150  -  total flux cleaned = 0.00501735 Jy
! Component: 200  -  total flux cleaned = 0.00614407 Jy
! Total flux subtracted in 200 components = 0.00614407 Jy
! Clean residual min=-0.001715 max=0.001521 Jy/beam
! Clean residual mean=0.000009 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.139666 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 127 components and 0.139666 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.109 mas, bmaj=1.703 mas, bpa=-2.557 degrees
! Estimated noise=0.19075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00127333 Jy
! Component: 100  -  total flux cleaned = 0.00202663 Jy
! Component: 150  -  total flux cleaned = 0.00270426 Jy
! Component: 200  -  total flux cleaned = 0.00328027 Jy
! Total flux subtracted in 200 components = 0.00328027 Jy
! Clean residual min=-0.001279 max=0.001200 Jy/beam
! Clean residual mean=0.000003 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.142947 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 154 components and 0.142946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064705Jy  sigma=1.370587
! Fit after  self-cal, rms=0.064687Jy  sigma=1.370358
wmodel /J0349+2104_X_map.mod
! wmodel: Unable to open new model file: /J0349+2104_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0349+2104_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.109 x 1.703 at -2.557 degrees (North through East)
! Clean map  min=-0.0012283  max=0.094202 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0349+2104_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0942023 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000313891 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.999629 0.999629 1.99926 3.99852 7.99703 15.9941 31.9881 63.9763
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.094 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  300.111 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0349+2104_X_dfm.log closed on Thu May 19 23:01:34 2016