! Started logfile: /scr/pima/bg219i_uvs/J0347+2339_S_dfm.log on Thu May 19 23:01:19 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219i_uvs/J0347+2339_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J0347+2339_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 1 visibilities/baseline/integration-bin. ! Found source: J0347+2339 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 8640 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0347+2339_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.019546Jy sigma=24.333520 ! Fit after self-cal, rms=0.839829Jy sigma=20.102098 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.158 mas, bmaj=5.274 mas, bpa=-8.38 degrees ! Estimated noise=0.511058 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.119059 Jy ! Component: 100 - total flux cleaned = 0.15204 Jy ! Total flux subtracted in 100 components = 0.15204 Jy ! Clean residual min=-0.006343 max=0.016289 Jy/beam ! Clean residual mean=-0.000048 rms=0.001736 Jy/beam ! Combined flux in latest and established models = 0.15204 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.15204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071999Jy sigma=1.550054 ! Fit after self-cal, rms=0.071930Jy sigma=1.548228 ! Inverting map ! Added new window around map position (-3, 7). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017018 Jy ! Component: 100 - total flux cleaned = 0.0274276 Jy ! Total flux subtracted in 100 components = 0.0274276 Jy ! Clean residual min=-0.004616 max=0.005923 Jy/beam ! Clean residual mean=-0.000024 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.179468 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.179468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066185Jy sigma=1.413078 ! Fit after self-cal, rms=0.066099Jy sigma=1.410678 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00760469 Jy ! Component: 100 - total flux cleaned = 0.0126138 Jy ! Total flux subtracted in 100 components = 0.0126138 Jy ! Clean residual min=-0.004248 max=0.003820 Jy/beam ! Clean residual mean=-0.000012 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.192082 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.192082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064655Jy sigma=1.380262 ! Fit after self-cal, rms=0.064628Jy sigma=1.379621 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.871 mas, bmaj=6.187 mas, bpa=-7.384 degrees ! Estimated noise=0.32462 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00565056 Jy ! Component: 100 - total flux cleaned = 0.00913084 Jy ! Component: 150 - total flux cleaned = 0.0115178 Jy ! Component: 200 - total flux cleaned = 0.0132431 Jy ! Total flux subtracted in 200 components = 0.0132431 Jy ! Clean residual min=-0.003649 max=0.003509 Jy/beam ! Clean residual mean=-0.000004 rms=0.000850 Jy/beam ! Combined flux in latest and established models = 0.205325 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 66 components and 0.205325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063914Jy sigma=1.367266 ! Fit after self-cal, rms=0.063900Jy sigma=1.366959 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.871 x 6.187 at -7.384 degrees (North through East) ! Clean map min=-0.0036622 max=0.15609 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 1.00 KP 1.00 ! LA 0.99 MK 1.03 NL 0.98 OV 0.99 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.85 HN 1.00 KP 0.99 ! LA 0.97 MK 1.01 NL 1.02 OV 0.97 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.98 HN 1.00 KP 1.02 ! LA 1.02 MK 1.04 NL 1.06 OV 0.99 ! PT 0.98 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.03 KP 1.00 ! LA 1.00 MK 1.02 NL 1.00 OV 1.04 ! PT 0.99 SC 1.02 ! ! ! Fit before self-cal, rms=0.063900Jy sigma=1.366959 ! Fit after self-cal, rms=0.061234Jy sigma=1.352800 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.903 mas, bmaj=6.244 mas, bpa=-7.386 degrees ! Estimated noise=0.326071 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172709 Jy ! Component: 100 - total flux cleaned = 0.000260173 Jy ! Component: 150 - total flux cleaned = 0.000307173 Jy ! Component: 200 - total flux cleaned = 0.000287485 Jy ! Total flux subtracted in 200 components = 0.000287485 Jy ! Clean residual min=-0.002894 max=0.003100 Jy/beam ! Clean residual mean=0.000012 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.205612 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 76 components and 0.205612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061210Jy sigma=1.352318 ! Fit after self-cal, rms=0.061198Jy sigma=1.352196 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061198Jy sigma=1.352196 ! Fit after self-cal, rms=0.061423Jy sigma=1.337474 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=6.217 mas, bpa=-7.351 degrees ! Estimated noise=0.328361 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930528 Jy ! Component: 100 - total flux cleaned = 0.000930265 Jy ! Component: 150 - total flux cleaned = 0.000953439 Jy ! Component: 200 - total flux cleaned = 0.000972165 Jy ! Total flux subtracted in 200 components = 0.000972165 Jy ! Clean residual min=-0.002650 max=0.002033 Jy/beam ! Clean residual mean=0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.206584 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 86 components and 0.206584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061377Jy sigma=1.336979 ! Fit after self-cal, rms=0.061388Jy sigma=1.336854 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.56614e-05 Jy ! Component: 100 - total flux cleaned = -6.9041e-05 Jy ! Component: 150 - total flux cleaned = -4.10381e-05 Jy ! Component: 200 - total flux cleaned = -4.11864e-05 Jy ! Total flux subtracted in 200 components = -4.11864e-05 Jy ! Clean residual min=-0.002640 max=0.002006 Jy/beam ! Clean residual mean=0.000001 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.206543 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 95 components and 0.206543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061378Jy sigma=1.336681 ! Fit after self-cal, rms=0.061377Jy sigma=1.336648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061377Jy sigma=1.336648 ! Fit after self-cal, rms=0.061708Jy sigma=1.336331 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.895 mas, bmaj=6.21 mas, bpa=-7.282 degrees ! Estimated noise=0.330379 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104045 Jy ! Component: 100 - total flux cleaned = 0.00111794 Jy ! Component: 150 - total flux cleaned = 0.00113235 Jy ! Component: 200 - total flux cleaned = 0.00114521 Jy ! Total flux subtracted in 200 components = 0.00114521 Jy ! Clean residual min=-0.002695 max=0.001952 Jy/beam ! Clean residual mean=0.000001 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.207688 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 98 components and 0.207688 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061677Jy sigma=1.336131 ! Fit after self-cal, rms=0.061676Jy sigma=1.336111 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.75699e-05 Jy ! Component: 100 - total flux cleaned = -5.87425e-05 Jy ! Component: 150 - total flux cleaned = -4.75379e-05 Jy ! Component: 200 - total flux cleaned = -5.83074e-05 Jy ! Total flux subtracted in 200 components = -5.83074e-05 Jy ! Clean residual min=-0.002693 max=0.001938 Jy/beam ! Clean residual mean=0.000001 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.20763 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 103 components and 0.20763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061671Jy sigma=1.336010 ! Fit after self-cal, rms=0.061670Jy sigma=1.335992 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061670Jy sigma=1.335992 ! Fit after self-cal, rms=0.061957Jy sigma=1.335765 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=9.895 mas, bpa=-2.402 degrees ! Estimated noise=0.408307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102576 Jy ! Component: 100 - total flux cleaned = 0.00138796 Jy ! Component: 150 - total flux cleaned = 0.00147962 Jy ! Component: 200 - total flux cleaned = 0.00156556 Jy ! Total flux subtracted in 200 components = 0.00156556 Jy ! Clean residual min=-0.003166 max=0.002901 Jy/beam ! Clean residual mean=0.000003 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.209196 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 119 components and 0.209196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061940Jy sigma=1.335850 ! Fit after self-cal, rms=0.061938Jy sigma=1.335804 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.97347e-05 Jy ! Component: 100 - total flux cleaned = 2.79444e-05 Jy ! Component: 150 - total flux cleaned = 7.79855e-05 Jy ! Component: 200 - total flux cleaned = 9.23969e-05 Jy ! Total flux subtracted in 200 components = 9.23969e-05 Jy ! Clean residual min=-0.003156 max=0.002894 Jy/beam ! Clean residual mean=0.000003 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.209288 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 123 components and 0.209288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061938Jy sigma=1.335871 ! Fit after self-cal, rms=0.061937Jy sigma=1.335846 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=6.201 mas, bpa=-7.222 degrees ! Estimated noise=0.332111 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.893 x 6.201 at -7.222 degrees (North through East) ! Clean map min=-0.0026648 max=0.15951 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=5.271 mas, bpa=-8.346 degrees ! Estimated noise=0.525484 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.122338 Jy ! Component: 100 - total flux cleaned = 0.157627 Jy ! Component: 150 - total flux cleaned = 0.17434 Jy ! Component: 200 - total flux cleaned = 0.18421 Jy ! Total flux subtracted in 200 components = 0.18421 Jy ! Clean residual min=-0.003781 max=0.005204 Jy/beam ! Clean residual mean=-0.000020 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.18421 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.18421 Jy ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=6.201 mas, bpa=-7.222 degrees ! Estimated noise=0.332111 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00864754 Jy ! Component: 100 - total flux cleaned = 0.0137494 Jy ! Component: 150 - total flux cleaned = 0.0170816 Jy ! Component: 200 - total flux cleaned = 0.0193619 Jy ! Total flux subtracted in 200 components = 0.0193619 Jy ! Clean residual min=-0.002628 max=0.002084 Jy/beam ! Clean residual mean=-0.000005 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.203572 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 67 components and 0.203572 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.512 mas, bmaj=9.895 mas, bpa=-2.402 degrees ! Estimated noise=0.408307 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00233198 Jy ! Component: 100 - total flux cleaned = 0.0036416 Jy ! Component: 150 - total flux cleaned = 0.0044392 Jy ! Component: 200 - total flux cleaned = 0.00493747 Jy ! Total flux subtracted in 200 components = 0.00493747 Jy ! Clean residual min=-0.003097 max=0.002851 Jy/beam ! Clean residual mean=0.000001 rms=0.000803 Jy/beam ! Combined flux in latest and established models = 0.208509 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000312956 Jy ! Component: 100 - total flux cleaned = 0.000510205 Jy ! Component: 150 - total flux cleaned = 0.0005672 Jy ! Component: 200 - total flux cleaned = 0.000592507 Jy ! Total flux subtracted in 200 components = 0.000592507 Jy ! Clean residual min=-0.003122 max=0.002876 Jy/beam ! Clean residual mean=0.000002 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.209102 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 97 components and 0.209102 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.893 mas, bmaj=6.201 mas, bpa=-7.222 degrees ! Estimated noise=0.332111 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000284811 Jy ! Component: 100 - total flux cleaned = -0.00036015 Jy ! Component: 150 - total flux cleaned = -0.000424646 Jy ! Component: 200 - total flux cleaned = -0.000439367 Jy ! Total flux subtracted in 200 components = -0.000439367 Jy ! Clean residual min=-0.002738 max=0.001947 Jy/beam ! Clean residual mean=0.000001 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.208662 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 108 components and 0.208662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061938Jy sigma=1.335987 ! Fit after self-cal, rms=0.061941Jy sigma=1.335914 wmodel /J0347+2339_S_map.mod ! wmodel: Unable to open new model file: /J0347+2339_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219i_uvs/J0347+2339_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.893 x 6.201 at -7.222 degrees (North through East) ! Clean map min=-0.002631 max=0.15965 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0347+2339_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.159652 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000554053 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04111 1.04111 2.08223 4.16445 8.3289 16.6578 33.3156 66.6312 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.159 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 288.153 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J0347+2339_S_dfm.log closed on Thu May 19 23:01:21 2016