! Started logfile: /scr/pima/bg219i_uvs/J0347+2004_X_dfm.log on Thu May 19 23:01:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0347+2004_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0347+2004_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.801852 visibilities/baseline/integration-bin.
! Found source: J0347+2004
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20784 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0347+2004_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 70 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.022976Jy  sigma=22.520590
! Fit after  self-cal, rms=0.845479Jy  sigma=18.446363
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8237 mas, bmaj=1.387 mas, bpa=-1.965 degrees
! Estimated noise=0.50076 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108712 Jy
! Component: 100  -  total flux cleaned = 0.139964 Jy
! Total flux subtracted in 100 components = 0.139964 Jy
! Clean residual min=-0.009035 max=0.028927 Jy/beam
! Clean residual mean=0.000001 rms=0.002519 Jy/beam
! Combined flux in latest and established models = 0.139964 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.139964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088271Jy  sigma=1.880612
! Fit after  self-cal, rms=0.088113Jy  sigma=1.878323
! Inverting map 
! Added new window around map position (3.6, 4.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0254298 Jy
! Component: 100  -  total flux cleaned = 0.0384948 Jy
! Total flux subtracted in 100 components = 0.0384948 Jy
! Clean residual min=-0.006814 max=0.013325 Jy/beam
! Clean residual mean=0.000000 rms=0.001724 Jy/beam
! Combined flux in latest and established models = 0.178459 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.178459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078075Jy  sigma=1.616067
! Fit after  self-cal, rms=0.077015Jy  sigma=1.593524
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0110677 Jy
! Component: 100  -  total flux cleaned = 0.018109 Jy
! Total flux subtracted in 100 components = 0.018109 Jy
! Clean residual min=-0.005541 max=0.009948 Jy/beam
! Clean residual mean=-0.000000 rms=0.001348 Jy/beam
! Combined flux in latest and established models = 0.196568 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 23 components and 0.196568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074239Jy  sigma=1.515552
! Fit after  self-cal, rms=0.073981Jy  sigma=1.509856
! Inverting map 
! Added new window around map position (1.2, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00899365 Jy
! Component: 100  -  total flux cleaned = 0.0145952 Jy
! Total flux subtracted in 100 components = 0.0145952 Jy
! Clean residual min=-0.004500 max=0.005322 Jy/beam
! Clean residual mean=-0.000001 rms=0.001118 Jy/beam
! Combined flux in latest and established models = 0.211163 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 34 components and 0.211163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.072178Jy  sigma=1.465239
! Fit after  self-cal, rms=0.072075Jy  sigma=1.462889
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.155 mas, bmaj=1.867 mas, bpa=-5.68 degrees
! Estimated noise=0.243917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00998968 Jy
! Component: 100  -  total flux cleaned = 0.0164373 Jy
! Component: 150  -  total flux cleaned = 0.0211942 Jy
! Component: 200  -  total flux cleaned = 0.0248057 Jy
! Total flux subtracted in 200 components = 0.0248057 Jy
! Clean residual min=-0.004112 max=0.006165 Jy/beam
! Clean residual mean=-0.000009 rms=0.001242 Jy/beam
! Combined flux in latest and established models = 0.235969 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 59 components and 0.235969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070535Jy  sigma=1.420655
! Fit after  self-cal, rms=0.070410Jy  sigma=1.417763
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.155 x 1.867 at -5.68 degrees (North through East)
! Clean map  min=-0.0038257  max=0.14965 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.93     MK        1.07     NL        0.97     OV        0.94     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.95     MK        1.11     NL        0.96     OV        0.96     
!   PT        0.95     SC        1.06     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.02     KP        1.01     
!   LA        0.96     MK        1.10     NL        0.97     OV        0.92     
!   PT        0.95     SC        1.04     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.01     KP        1.00     
!   LA        0.97     MK        1.07     NL        0.98     OV        0.96     
!   PT        0.96     SC        1.06     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.07     KP        1.03     
!   LA        0.94     MK        1.07     NL        1.00     OV        0.94     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.06     NL        0.98     OV        0.99     
!   PT        0.94     SC        1.07     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        1.03     KP        1.03     
!   LA        0.98     MK        1.05     NL        0.97     OV        0.92     
!   PT        0.98     SC        1.11     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.05     
!   LA        0.98     MK        1.07     NL        0.97     OV        0.94     
!   PT        0.96     SC        1.04     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        1.06     
!   LA        0.99     MK        1.07     NL        0.97     OV        0.97     
!   PT        0.99     SC        1.12     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        0.97     KP        1.04     
!   LA        0.99     MK        1.09     NL        0.98     OV        0.93     
!   PT        0.98     SC        1.14     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.04     KP        1.01     
!   LA        0.99     MK        1.06     NL        0.96     OV        0.98     
!   PT        0.96     SC        1.08     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.13     NL        0.99     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.070410Jy  sigma=1.417763
! Fit after  self-cal, rms=0.070955Jy  sigma=1.400216
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.185 mas, bmaj=1.898 mas, bpa=-5.608 degrees
! Estimated noise=0.242831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-16.8, -27.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00389001 Jy
! Component: 100  -  total flux cleaned = 0.00414213 Jy
! Component: 150  -  total flux cleaned = 0.00454553 Jy
! Component: 200  -  total flux cleaned = 0.00505229 Jy
! Total flux subtracted in 200 components = 0.00505229 Jy
! Clean residual min=-0.002883 max=0.004107 Jy/beam
! Clean residual mean=-0.000005 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.241021 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 89 components and 0.241021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070494Jy  sigma=1.390370
! Fit after  self-cal, rms=0.070542Jy  sigma=1.389817
! Inverting map 
! Added new window around map position (-2.6, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036623 Jy
! Component: 100  -  total flux cleaned = 0.00514132 Jy
! Component: 150  -  total flux cleaned = 0.00556135 Jy
! Component: 200  -  total flux cleaned = 0.00586979 Jy
! Total flux subtracted in 200 components = 0.00586979 Jy
! Clean residual min=-0.002623 max=0.002773 Jy/beam
! Clean residual mean=-0.000003 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.246891 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 114 components and 0.246891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070280Jy  sigma=1.384828
! Fit after  self-cal, rms=0.070276Jy  sigma=1.384614
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070276Jy  sigma=1.384614
! Fit after  self-cal, rms=0.070288Jy  sigma=1.378963
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=1.881 mas, bpa=-5.855 degrees
! Estimated noise=0.241521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000537221 Jy
! Component: 100  -  total flux cleaned = 0.000686268 Jy
! Component: 150  -  total flux cleaned = 0.000950903 Jy
! Component: 200  -  total flux cleaned = 0.000993337 Jy
! Total flux subtracted in 200 components = 0.000993337 Jy
! Clean residual min=-0.002106 max=0.002604 Jy/beam
! Clean residual mean=-0.000002 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.247884 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 138 components and 0.247885 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070221Jy  sigma=1.377632
! Fit after  self-cal, rms=0.070231Jy  sigma=1.377569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.2, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0024252 Jy
! Component: 100  -  total flux cleaned = 0.00254977 Jy
! Component: 150  -  total flux cleaned = 0.00263938 Jy
! Component: 200  -  total flux cleaned = 0.00276503 Jy
! Total flux subtracted in 200 components = 0.00276503 Jy
! Clean residual min=-0.001979 max=0.002177 Jy/beam
! Clean residual mean=-0.000001 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.25065 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 155 components and 0.25065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070115Jy  sigma=1.375252
! Fit after  self-cal, rms=0.070119Jy  sigma=1.375135
! Inverting map 
! Added new window around map position (7.8, 33.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294055 Jy
! Component: 100  -  total flux cleaned = 6.6219e-05 Jy
! Component: 150  -  total flux cleaned = -0.000109156 Jy
! Component: 200  -  total flux cleaned = -0.000147411 Jy
! Total flux subtracted in 200 components = -0.000147411 Jy
! Clean residual min=-0.001727 max=0.001932 Jy/beam
! Clean residual mean=-0.000001 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.250502 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 181 components and 0.250502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069996Jy  sigma=1.373982
! Fit after  self-cal, rms=0.069993Jy  sigma=1.373896
! Inverting map 
! Added new window around map position (-11, 7.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00147665 Jy
! Component: 100  -  total flux cleaned = 0.00160325 Jy
! Component: 150  -  total flux cleaned = 0.00167545 Jy
! Component: 200  -  total flux cleaned = 0.0017416 Jy
! Total flux subtracted in 200 components = 0.0017416 Jy
! Clean residual min=-0.001573 max=0.001651 Jy/beam
! Clean residual mean=-0.000000 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.252244 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 196 components and 0.252244 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069928Jy  sigma=1.372852
! Fit after  self-cal, rms=0.069929Jy  sigma=1.372817
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069929Jy  sigma=1.372817
! Fit after  self-cal, rms=0.069310Jy  sigma=1.372416
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.179 mas, bmaj=1.881 mas, bpa=-5.835 degrees
! Estimated noise=0.240113 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000108423 Jy
! Component: 100  -  total flux cleaned = 0.000113228 Jy
! Component: 150  -  total flux cleaned = 0.000213993 Jy
! Component: 200  -  total flux cleaned = 0.000245836 Jy
! Total flux subtracted in 200 components = 0.000245836 Jy
! Clean residual min=-0.001564 max=0.001619 Jy/beam
! Clean residual mean=0.000000 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.25249 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 207 components and 0.252489 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069258Jy  sigma=1.371981
! Fit after  self-cal, rms=0.069255Jy  sigma=1.371962
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.67136e-06 Jy
! Component: 100  -  total flux cleaned = -5.51518e-06 Jy
! Component: 150  -  total flux cleaned = -3.32358e-05 Jy
! Component: 200  -  total flux cleaned = -3.29839e-05 Jy
! Total flux subtracted in 200 components = -3.29839e-05 Jy
! Clean residual min=-0.001501 max=0.001591 Jy/beam
! Clean residual mean=0.000000 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.252456 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 217 components and 0.252457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069224Jy  sigma=1.371651
! Fit after  self-cal, rms=0.069225Jy  sigma=1.371646
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069225Jy  sigma=1.371646
! Fit after  self-cal, rms=0.068958Jy  sigma=1.371579
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=2.814 mas, bpa=-6.1 degrees
! Estimated noise=0.27912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.24664e-05 Jy
! Component: 100  -  total flux cleaned = -3.93189e-05 Jy
! Component: 150  -  total flux cleaned = 5.72217e-05 Jy
! Component: 200  -  total flux cleaned = 7.95245e-05 Jy
! Total flux subtracted in 200 components = 7.95245e-05 Jy
! Clean residual min=-0.001486 max=0.001828 Jy/beam
! Clean residual mean=0.000002 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.252536 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 234 components and 0.252536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068940Jy  sigma=1.371417
! Fit after  self-cal, rms=0.068939Jy  sigma=1.371398
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000197769 Jy
! Component: 100  -  total flux cleaned = 0.000262048 Jy
! Component: 150  -  total flux cleaned = 0.000282636 Jy
! Component: 200  -  total flux cleaned = 0.000341471 Jy
! Total flux subtracted in 200 components = 0.000341471 Jy
! Clean residual min=-0.001443 max=0.001792 Jy/beam
! Clean residual mean=0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.252878 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 246 components and 0.252878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068927Jy  sigma=1.371319
! Fit after  self-cal, rms=0.068928Jy  sigma=1.371307
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.179 mas, bmaj=1.882 mas, bpa=-5.819 degrees
! Estimated noise=0.239515 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.179 x 1.882 at -5.819 degrees (North through East)
! Clean map  min=-0.0021085  max=0.14703 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.838 mas, bmaj=1.394 mas, bpa=-2.115 degrees
! Estimated noise=0.499487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108108 Jy
! Component: 100  -  total flux cleaned = 0.145986 Jy
! Component: 150  -  total flux cleaned = 0.166607 Jy
! Component: 200  -  total flux cleaned = 0.180182 Jy
! Total flux subtracted in 200 components = 0.180182 Jy
! Clean residual min=-0.004564 max=0.007739 Jy/beam
! Clean residual mean=0.000001 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.180182 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.180182 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.179 mas, bmaj=1.882 mas, bpa=-5.819 degrees
! Estimated noise=0.239515 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0175913 Jy
! Component: 100  -  total flux cleaned = 0.0285452 Jy
! Component: 150  -  total flux cleaned = 0.0361369 Jy
! Component: 200  -  total flux cleaned = 0.0419476 Jy
! Total flux subtracted in 200 components = 0.0419476 Jy
! Clean residual min=-0.003312 max=0.004804 Jy/beam
! Clean residual mean=-0.000002 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.22213 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 61 components and 0.22213 Jy
! Inverting map 
! Added new window around map position (-1.4, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00521602 Jy
! Component: 100  -  total flux cleaned = 0.00930579 Jy
! Component: 150  -  total flux cleaned = 0.0122267 Jy
! Component: 200  -  total flux cleaned = 0.014897 Jy
! Total flux subtracted in 200 components = 0.014897 Jy
! Clean residual min=-0.002476 max=0.002757 Jy/beam
! Clean residual mean=-0.000002 rms=0.000682 Jy/beam
! Combined flux in latest and established models = 0.237027 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 100 components and 0.237027 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.294 mas, bmaj=2.814 mas, bpa=-6.1 degrees
! Estimated noise=0.27912 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00401681 Jy
! Component: 100  -  total flux cleaned = 0.00696356 Jy
! Component: 150  -  total flux cleaned = 0.00935156 Jy
! Component: 200  -  total flux cleaned = 0.0105656 Jy
! Total flux subtracted in 200 components = 0.0105656 Jy
! Clean residual min=-0.002393 max=0.002316 Jy/beam
! Clean residual mean=-0.000001 rms=0.000597 Jy/beam
! Combined flux in latest and established models = 0.247592 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000840692 Jy
! Component: 100  -  total flux cleaned = 0.00140179 Jy
! Component: 150  -  total flux cleaned = 0.00190902 Jy
! Component: 200  -  total flux cleaned = 0.00226596 Jy
! Total flux subtracted in 200 components = 0.00226596 Jy
! Clean residual min=-0.002032 max=0.001859 Jy/beam
! Clean residual mean=0.000000 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.249858 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 171 components and 0.249858 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.179 mas, bmaj=1.882 mas, bpa=-5.819 degrees
! Estimated noise=0.239515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000452641 Jy
! Component: 100  -  total flux cleaned = -0.00045259 Jy
! Component: 150  -  total flux cleaned = -0.000262984 Jy
! Component: 200  -  total flux cleaned = -4.62424e-05 Jy
! Total flux subtracted in 200 components = -4.62424e-05 Jy
! Clean residual min=-0.001539 max=0.001642 Jy/beam
! Clean residual mean=0.000000 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.249812 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 198 components and 0.249812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069001Jy  sigma=1.372411
! Fit after  self-cal, rms=0.068974Jy  sigma=1.372087
wmodel /J0347+2004_X_map.mod
! wmodel: Unable to open new model file: /J0347+2004_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0347+2004_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.179 x 1.882 at -5.819 degrees (North through East)
! Clean map  min=-0.0020151  max=0.14658 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0347+2004_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.146577 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000399498 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.817655 0.817655 1.63531 3.27062 6.54124 13.0825 26.165 52.3299
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.146 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  366.902 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0347+2004_X_dfm.log closed on Thu May 19 23:01:18 2016