! Started logfile: /scr/pima/bg219i_uvs/J0347+2004_S_uvs.log on Wed Apr  6 22:50:58 2016
obs /scr/pima/bg219i_uvs/J0347+2004_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0347+2004_S_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877778 visibilities/baseline/integration-bin.
! Found source: J0347+2004
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7584 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0347+2004_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 69 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.077367Jy  sigma=23.418455
! Fit after  self-cal, rms=0.712311Jy  sigma=15.761641
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.163 mas, bmaj=5.461 mas, bpa=-6.331 degrees
! Estimated noise=0.582791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203473 Jy
! Component: 100  -  total flux cleaned = 0.26757 Jy
! Total flux subtracted in 100 components = 0.26757 Jy
! Clean residual min=-0.014851 max=0.044871 Jy/beam
! Clean residual mean=-0.000248 rms=0.004881 Jy/beam
! Combined flux in latest and established models = 0.26757 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.26757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.130041Jy  sigma=2.654368
! Fit after  self-cal, rms=0.129911Jy  sigma=2.652937
! Inverting map 
! Added new window around map position (4, 4.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0467477 Jy
! Component: 100  -  total flux cleaned = 0.0778875 Jy
! Total flux subtracted in 100 components = 0.0778875 Jy
! Clean residual min=-0.010319 max=0.026188 Jy/beam
! Clean residual mean=-0.000153 rms=0.003077 Jy/beam
! Combined flux in latest and established models = 0.345457 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 32 components and 0.345457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096967Jy  sigma=1.973088
! Fit after  self-cal, rms=0.096756Jy  sigma=1.968208
! Inverting map 
! Added new window around map position (-4.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.025889 Jy
! Component: 100  -  total flux cleaned = 0.0452039 Jy
! Total flux subtracted in 100 components = 0.0452039 Jy
! Clean residual min=-0.007065 max=0.011464 Jy/beam
! Clean residual mean=-0.000100 rms=0.002160 Jy/beam
! Combined flux in latest and established models = 0.390661 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 53 components and 0.390661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082275Jy  sigma=1.674554
! Fit after  self-cal, rms=0.082185Jy  sigma=1.672877
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.967 mas, bmaj=6.705 mas, bpa=-7.247 degrees
! Estimated noise=0.399403 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0262655 Jy
! Component: 100  -  total flux cleaned = 0.0440161 Jy
! Component: 150  -  total flux cleaned = 0.0566516 Jy
! Component: 200  -  total flux cleaned = 0.065849 Jy
! Total flux subtracted in 200 components = 0.065849 Jy
! Clean residual min=-0.005991 max=0.009349 Jy/beam
! Clean residual mean=-0.000029 rms=0.001677 Jy/beam
! Combined flux in latest and established models = 0.45651 Jy
! Performing phase self-cal
! Adding 71 model components to the UV plane model.
! The established model now contains 115 components and 0.45651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070248Jy  sigma=1.437908
! Fit after  self-cal, rms=0.070176Jy  sigma=1.437041
! Inverting map 
! Added new window around map position (-51, 105).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00912957 Jy
! Component: 100  -  total flux cleaned = 0.0148043 Jy
! Component: 150  -  total flux cleaned = 0.0174997 Jy
! Component: 200  -  total flux cleaned = 0.0191649 Jy
! Total flux subtracted in 200 components = 0.0191649 Jy
! Clean residual min=-0.005762 max=0.006074 Jy/beam
! Clean residual mean=-0.000017 rms=0.001282 Jy/beam
! Combined flux in latest and established models = 0.475675 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 158 components and 0.475675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068534Jy  sigma=1.407667
! Fit after  self-cal, rms=0.068469Jy  sigma=1.406236
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.967 x 6.705 at -7.247 degrees (North through East)
! Clean map  min=-0.0056392  max=0.26735 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        0.99     KP        1.00     
!   LA        0.97     MK        1.06     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        0.99     KP        0.99     
!   LA        0.97     MK        1.05     NL        0.95     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.07     NL        0.97     OV        0.99     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        0.96     KP        1.01     
!   LA        0.99     MK        1.05     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.068469Jy  sigma=1.406236
! Fit after  self-cal, rms=0.067896Jy  sigma=1.381113
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=6.736 mas, bpa=-6.736 degrees
! Estimated noise=0.398114 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.58382e-05 Jy
! Component: 100  -  total flux cleaned = 0.000234493 Jy
! Component: 150  -  total flux cleaned = 0.000316311 Jy
! Component: 200  -  total flux cleaned = 0.00052696 Jy
! Total flux subtracted in 200 components = 0.00052696 Jy
! Clean residual min=-0.004248 max=0.004381 Jy/beam
! Clean residual mean=-0.000005 rms=0.000956 Jy/beam
! Combined flux in latest and established models = 0.476202 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 180 components and 0.476202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067652Jy  sigma=1.376450
! Fit after  self-cal, rms=0.067648Jy  sigma=1.376352
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067648Jy  sigma=1.376352
! Fit after  self-cal, rms=0.068213Jy  sigma=1.361654
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=6.719 mas, bpa=-7.242 degrees
! Estimated noise=0.398916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000767823 Jy
! Component: 100  -  total flux cleaned = -0.000714867 Jy
! Component: 150  -  total flux cleaned = -0.000711687 Jy
! Component: 200  -  total flux cleaned = -0.000710703 Jy
! Total flux subtracted in 200 components = -0.000710703 Jy
! Clean residual min=-0.003182 max=0.003071 Jy/beam
! Clean residual mean=-0.000009 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.475491 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 197 components and 0.475491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068157Jy  sigma=1.359430
! Fit after  self-cal, rms=0.068157Jy  sigma=1.359298
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.21516e-05 Jy
! Component: 100  -  total flux cleaned = 8.23065e-06 Jy
! Component: 150  -  total flux cleaned = 8.11832e-06 Jy
! Component: 200  -  total flux cleaned = 8.49731e-06 Jy
! Total flux subtracted in 200 components = 8.49731e-06 Jy
! Clean residual min=-0.003131 max=0.003007 Jy/beam
! Clean residual mean=-0.000008 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 0.4755 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 205 components and 0.4755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068131Jy  sigma=1.358259
! Fit after  self-cal, rms=0.068127Jy  sigma=1.358209
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068127Jy  sigma=1.358209
! Fit after  self-cal, rms=0.068244Jy  sigma=1.357867
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.023 mas, bmaj=6.709 mas, bpa=-7.227 degrees
! Estimated noise=0.398472 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000839133 Jy
! Component: 100  -  total flux cleaned = -0.000763814 Jy
! Component: 150  -  total flux cleaned = -0.000730799 Jy
! Component: 200  -  total flux cleaned = -0.000732122 Jy
! Total flux subtracted in 200 components = -0.000732122 Jy
! Clean residual min=-0.003017 max=0.002903 Jy/beam
! Clean residual mean=-0.000007 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.474768 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 209 components and 0.474768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068219Jy  sigma=1.356698
! Fit after  self-cal, rms=0.068216Jy  sigma=1.356649
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.30235e-05 Jy
! Component: 100  -  total flux cleaned = 3.40617e-05 Jy
! Component: 150  -  total flux cleaned = 3.39187e-05 Jy
! Component: 200  -  total flux cleaned = 3.37411e-05 Jy
! Total flux subtracted in 200 components = 3.37411e-05 Jy
! Clean residual min=-0.002956 max=0.002863 Jy/beam
! Clean residual mean=-0.000007 rms=0.000717 Jy/beam
! Combined flux in latest and established models = 0.474801 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 218 components and 0.474801 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068202Jy  sigma=1.356059
! Fit after  self-cal, rms=0.068200Jy  sigma=1.356034
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068200Jy  sigma=1.356034
! Fit after  self-cal, rms=0.068280Jy  sigma=1.355833
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.717 mas, bmaj=10.12 mas, bpa=-4.299 degrees
! Estimated noise=0.490285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000257626 Jy
! Component: 100  -  total flux cleaned = 0.000298931 Jy
! Component: 150  -  total flux cleaned = 0.000333013 Jy
! Component: 200  -  total flux cleaned = 0.000394335 Jy
! Total flux subtracted in 200 components = 0.000394335 Jy
! Clean residual min=-0.002765 max=0.002938 Jy/beam
! Clean residual mean=-0.000005 rms=0.000757 Jy/beam
! Combined flux in latest and established models = 0.475196 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 227 components and 0.475196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068280Jy  sigma=1.355518
! Fit after  self-cal, rms=0.068277Jy  sigma=1.355466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000155002 Jy
! Component: 100  -  total flux cleaned = 0.000128557 Jy
! Component: 150  -  total flux cleaned = 0.000129644 Jy
! Component: 200  -  total flux cleaned = 0.000129331 Jy
! Total flux subtracted in 200 components = 0.000129331 Jy
! Clean residual min=-0.002743 max=0.002928 Jy/beam
! Clean residual mean=-0.000004 rms=0.000748 Jy/beam
! Combined flux in latest and established models = 0.475325 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 234 components and 0.475325 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068281Jy  sigma=1.355390
! Fit after  self-cal, rms=0.068279Jy  sigma=1.355357
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=6.701 mas, bpa=-7.194 degrees
! Estimated noise=0.398082 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.025 x 6.701 at -7.194 degrees (North through East)
! Clean map  min=-0.0028011  max=0.26584 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.206 mas, bmaj=5.465 mas, bpa=-6.459 degrees
! Estimated noise=0.581951 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203058 Jy
! Component: 100  -  total flux cleaned = 0.267596 Jy
! Component: 150  -  total flux cleaned = 0.310039 Jy
! Component: 200  -  total flux cleaned = 0.340689 Jy
! Total flux subtracted in 200 components = 0.340689 Jy
! Clean residual min=-0.008939 max=0.017668 Jy/beam
! Clean residual mean=-0.000148 rms=0.002762 Jy/beam
! Combined flux in latest and established models = 0.340689 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 43 model components to the UV plane model.
! The established model now contains 43 components and 0.340689 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=6.701 mas, bpa=-7.194 degrees
! Estimated noise=0.398082 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0386818 Jy
! Component: 100  -  total flux cleaned = 0.0642998 Jy
! Component: 150  -  total flux cleaned = 0.0820499 Jy
! Component: 200  -  total flux cleaned = 0.0947035 Jy
! Total flux subtracted in 200 components = 0.0947035 Jy
! Clean residual min=-0.004134 max=0.007332 Jy/beam
! Clean residual mean=-0.000054 rms=0.001495 Jy/beam
! Combined flux in latest and established models = 0.435393 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 105 components and 0.435393 Jy
! Inverting map 
! Added new window around map position (6.5, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00930981 Jy
! Component: 100  -  total flux cleaned = 0.0162945 Jy
! Component: 150  -  total flux cleaned = 0.0216582 Jy
! Component: 200  -  total flux cleaned = 0.0258774 Jy
! Total flux subtracted in 200 components = 0.0258774 Jy
! Clean residual min=-0.003074 max=0.003220 Jy/beam
! Clean residual mean=-0.000024 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.46127 Jy
! Adding 68 model components to the UV plane model.
! The established model now contains 163 components and 0.46127 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.717 mas, bmaj=10.12 mas, bpa=-4.299 degrees
! Estimated noise=0.490285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00533917 Jy
! Component: 100  -  total flux cleaned = 0.00874606 Jy
! Component: 150  -  total flux cleaned = 0.0110916 Jy
! Component: 200  -  total flux cleaned = 0.012775 Jy
! Total flux subtracted in 200 components = 0.012775 Jy
! Clean residual min=-0.002621 max=0.002789 Jy/beam
! Clean residual mean=-0.000015 rms=0.000731 Jy/beam
! Combined flux in latest and established models = 0.474045 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00088666 Jy
! Component: 100  -  total flux cleaned = 0.00136373 Jy
! Component: 150  -  total flux cleaned = 0.00173926 Jy
! Component: 200  -  total flux cleaned = 0.00209745 Jy
! Total flux subtracted in 200 components = 0.00209745 Jy
! Clean residual min=-0.002526 max=0.002578 Jy/beam
! Clean residual mean=-0.000010 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.476143 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 234 components and 0.476143 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.025 mas, bmaj=6.701 mas, bpa=-7.194 degrees
! Estimated noise=0.398082 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.10725e-05 Jy
! Component: 100  -  total flux cleaned = 9.90492e-05 Jy
! Component: 150  -  total flux cleaned = 0.000271073 Jy
! Component: 200  -  total flux cleaned = 0.000389929 Jy
! Total flux subtracted in 200 components = 0.000389929 Jy
! Clean residual min=-0.002768 max=0.003165 Jy/beam
! Clean residual mean=-0.000007 rms=0.000685 Jy/beam
! Combined flux in latest and established models = 0.476533 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 253 components and 0.476533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.068310Jy  sigma=1.354366
! Fit after  self-cal, rms=0.068287Jy  sigma=1.353840
wmodel /scr/pima/bg219i_uvs/J0347+2004_S_map.mod
! Writing 253 model components to file: /scr/pima/bg219i_uvs/J0347+2004_S_map.mod
wobs /scr/pima/bg219i_uvs/J0347+2004_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0347+2004_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J0347+2004_S_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219i_uvs/J0347+2004_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000715327 Jy
! Component: 100  -  total flux cleaned = 0.00117348 Jy
! Component: 150  -  total flux cleaned = 0.00160474 Jy
! Component: 200  -  total flux cleaned = 0.0017701 Jy
! Component: 250  -  total flux cleaned = 0.00184946 Jy
! Component: 300  -  total flux cleaned = 0.0018877 Jy
! Component: 350  -  total flux cleaned = 0.0019248 Jy
! Component: 400  -  total flux cleaned = 0.00188826 Jy
! Component: 450  -  total flux cleaned = 0.0017825 Jy
! Component: 500  -  total flux cleaned = 0.00181676 Jy
! Component: 550  -  total flux cleaned = 0.00174887 Jy
! Component: 600  -  total flux cleaned = 0.0016498 Jy
! Component: 650  -  total flux cleaned = 0.00158586 Jy
! Component: 700  -  total flux cleaned = 0.00152204 Jy
! Component: 750  -  total flux cleaned = 0.00145919 Jy
! Component: 800  -  total flux cleaned = 0.00127494 Jy
! Component: 850  -  total flux cleaned = 0.00127535 Jy
! Component: 900  -  total flux cleaned = 0.00124566 Jy
! Component: 950  -  total flux cleaned = 0.00118703 Jy
! Component: 1000  -  total flux cleaned = 0.00127235 Jy
! Component: 1050  -  total flux cleaned = 0.00118704 Jy
! Component: 1100  -  total flux cleaned = 0.00121463 Jy
! Component: 1150  -  total flux cleaned = 0.0011868 Jy
! Component: 1200  -  total flux cleaned = 0.00105144 Jy
! Component: 1250  -  total flux cleaned = 0.0011052 Jy
! Component: 1300  -  total flux cleaned = 0.00110532 Jy
! Component: 1350  -  total flux cleaned = 0.00105349 Jy
! Component: 1400  -  total flux cleaned = 0.00105378 Jy
! Component: 1450  -  total flux cleaned = 0.000977938 Jy
! Component: 1500  -  total flux cleaned = 0.00102795 Jy
! Component: 1550  -  total flux cleaned = 0.000904471 Jy
! Component: 1600  -  total flux cleaned = 0.0010022 Jy
! Component: 1650  -  total flux cleaned = 0.000929571 Jy
! Component: 1700  -  total flux cleaned = 0.000882365 Jy
! Component: 1750  -  total flux cleaned = 0.00088235 Jy
! Component: 1800  -  total flux cleaned = 0.000859251 Jy
! Component: 1850  -  total flux cleaned = 0.000767074 Jy
! Component: 1900  -  total flux cleaned = 0.000858494 Jy
! Component: 1950  -  total flux cleaned = 0.000813566 Jy
! Component: 2000  -  total flux cleaned = 0.0007688 Jy
! Component: 2050  -  total flux cleaned = 0.000747036 Jy
! Component: 2100  -  total flux cleaned = 0.000703459 Jy
! Component: 2150  -  total flux cleaned = 0.000746961 Jy
! Component: 2200  -  total flux cleaned = 0.000682534 Jy
! Component: 2250  -  total flux cleaned = 0.000703432 Jy
! Component: 2300  -  total flux cleaned = 0.000640496 Jy
! Component: 2350  -  total flux cleaned = 0.000640318 Jy
! Component: 2400  -  total flux cleaned = 0.000722383 Jy
! Component: 2450  -  total flux cleaned = 0.000640924 Jy
! Component: 2500  -  total flux cleaned = 0.000641233 Jy
! Component: 2550  -  total flux cleaned = 0.000621653 Jy
! Component: 2600  -  total flux cleaned = 0.000680887 Jy
! Component: 2650  -  total flux cleaned = 0.000661319 Jy
! Component: 2700  -  total flux cleaned = 0.000642005 Jy
! Component: 2750  -  total flux cleaned = 0.000680164 Jy
! Component: 2800  -  total flux cleaned = 0.000717987 Jy
! Component: 2850  -  total flux cleaned = 0.000661868 Jy
! Component: 2900  -  total flux cleaned = 0.000680509 Jy
! Component: 2950  -  total flux cleaned = 0.000735933 Jy
! Component: 3000  -  total flux cleaned = 0.000827185 Jy
! Component: 3050  -  total flux cleaned = 0.000827185 Jy
! Component: 3100  -  total flux cleaned = 0.000773504 Jy
! Component: 3150  -  total flux cleaned = 0.000791405 Jy
! Component: 3200  -  total flux cleaned = 0.000826778 Jy
! Component: 3250  -  total flux cleaned = 0.00086194 Jy
! Component: 3300  -  total flux cleaned = 0.000861944 Jy
! Component: 3350  -  total flux cleaned = 0.000947984 Jy
! Component: 3400  -  total flux cleaned = 0.000896698 Jy
! Component: 3450  -  total flux cleaned = 0.000964416 Jy
! Component: 3500  -  total flux cleaned = 0.000964431 Jy
! Component: 3550  -  total flux cleaned = 0.000997784 Jy
! Component: 3600  -  total flux cleaned = 0.000981274 Jy
! Component: 3650  -  total flux cleaned = 0.000997655 Jy
! Component: 3700  -  total flux cleaned = 0.00101394 Jy
! Component: 3750  -  total flux cleaned = 0.000997735 Jy
! Component: 3800  -  total flux cleaned = 0.00102976 Jy
! Component: 3850  -  total flux cleaned = 0.000965985 Jy
! Component: 3900  -  total flux cleaned = 0.000997592 Jy
! Component: 3950  -  total flux cleaned = 0.000950325 Jy
! Component: 4000  -  total flux cleaned = 0.000950172 Jy
! Component: 4050  -  total flux cleaned = 0.000950237 Jy
! Total flux subtracted in 4096 components = 0.000888605 Jy
! Clean residual min=-0.000889 max=0.000968 Jy/beam
! Clean residual mean=-0.000004 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.477422 Jy
keep
! Adding 329 model components to the UV plane model.
! The established model now contains 582 components and 0.477421 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0347+2004_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.025 x 6.701 at -7.194 degrees (North through East)
! Clean map  min=-0.0017687  max=0.26638 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0347+2004_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.266384 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297136 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.334633 0.334633 0.669266 1.33853 2.67706 5.35413 10.7083 21.4165 42.833 85.666
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.266 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  896.504 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0347+2004_S_uvs.log closed on Wed Apr  6 22:51:03 2016