! Started logfile: /scr/pima/bg219i_uvs/J0339+6008_X_dfm.log on Thu May 19 23:00:59 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0339+6008_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0339+6008_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.885824 visibilities/baseline/integration-bin.
! Found source: J0339+6008
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27744 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0339+6008_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002566Jy  sigma=24.129965
! Fit after  self-cal, rms=0.941212Jy  sigma=22.608868
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7308 mas, bmaj=1.248 mas, bpa=-78.98 degrees
! Estimated noise=0.387085 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0448397 Jy
! Component: 100  -  total flux cleaned = 0.0555364 Jy
! Total flux subtracted in 100 components = 0.0555364 Jy
! Clean residual min=-0.003087 max=0.005415 Jy/beam
! Clean residual mean=-0.000008 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.0555364 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0555364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063111Jy  sigma=1.425810
! Fit after  self-cal, rms=0.062081Jy  sigma=1.401809
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00525571 Jy
! Component: 100  -  total flux cleaned = 0.00829835 Jy
! Total flux subtracted in 100 components = 0.00829835 Jy
! Clean residual min=-0.002593 max=0.005080 Jy/beam
! Clean residual mean=-0.000005 rms=0.000625 Jy/beam
! Combined flux in latest and established models = 0.0638347 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.0638347 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061423Jy  sigma=1.383408
! Fit after  self-cal, rms=0.061432Jy  sigma=1.383187
! Inverting map 
! Added new window around map position (0.8, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00442793 Jy
! Component: 100  -  total flux cleaned = 0.00648066 Jy
! Total flux subtracted in 100 components = 0.00648066 Jy
! Clean residual min=-0.002439 max=0.002518 Jy/beam
! Clean residual mean=-0.000003 rms=0.000555 Jy/beam
! Combined flux in latest and established models = 0.0703154 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 22 components and 0.0703153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061082Jy  sigma=1.373932
! Fit after  self-cal, rms=0.061047Jy  sigma=1.372889
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.603 mas, bpa=-82.71 degrees
! Estimated noise=0.184498 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00259777 Jy
! Component: 100  -  total flux cleaned = 0.00395306 Jy
! Component: 150  -  total flux cleaned = 0.00475746 Jy
! Component: 200  -  total flux cleaned = 0.00525818 Jy
! Total flux subtracted in 200 components = 0.00525818 Jy
! Clean residual min=-0.001248 max=0.001186 Jy/beam
! Clean residual mean=-0.000000 rms=0.000291 Jy/beam
! Combined flux in latest and established models = 0.0755735 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 40 components and 0.0755735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060941Jy  sigma=1.370085
! Fit after  self-cal, rms=0.060924Jy  sigma=1.369674
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.003 x 1.603 at -82.71 degrees (North through East)
! Clean map  min=-0.001195  max=0.059679 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.98     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.08     NL        1.07     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        1.00     HN        0.96     KP        0.97     
!   LA        1.03     MK        1.03     NL        1.01     OV        0.96     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        0.95     KP        1.05     
!   LA        0.98     MK        1.07     NL        1.02     OV        0.99     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        0.95     KP        1.03     
!   LA        0.99     MK        0.94     NL        1.01     OV        1.02     
!   PT        1.02     SC        1.09     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.97     KP        1.02     
!   LA        1.01     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.98     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.00     KP        1.01     
!   LA        0.98     MK        1.04     NL        1.04     OV        0.94     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        0.93     KP        1.06     
!   LA        0.96     MK        1.00     NL        1.00     OV        1.01     
!   PT        1.04     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.07     HN        0.95     KP        1.07     
!   LA        0.92     MK        1.11     NL        0.98     OV        0.94     
!   PT        1.02     SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.96     KP        1.12     
!   LA        0.94     MK        1.04     NL        1.07     OV        0.94     
!   PT        1.03     SC        0.90     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        1.04     HN        0.93     KP        1.01     
!   LA        0.95     MK        1.08     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        0.95     KP        1.01     
!   LA        1.00     MK        0.91     NL        1.01     OV        1.00     
!   PT        0.97     SC        1.05     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.95     HN        0.95     KP        1.04     
!   LA        0.94     MK        1.00     NL        1.04     OV        0.99     
!   PT        1.03     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.060924Jy  sigma=1.369674
! Fit after  self-cal, rms=0.060507Jy  sigma=1.367224
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.005 mas, bmaj=1.605 mas, bpa=-83.11 degrees
! Estimated noise=0.183961 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000638006 Jy
! Component: 100  -  total flux cleaned = 0.000744504 Jy
! Component: 150  -  total flux cleaned = 0.000810497 Jy
! Component: 200  -  total flux cleaned = 0.00085265 Jy
! Total flux subtracted in 200 components = 0.00085265 Jy
! Clean residual min=-0.000993 max=0.001108 Jy/beam
! Clean residual mean=0.000002 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.0764262 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.0764262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060496Jy  sigma=1.366986
! Fit after  self-cal, rms=0.060510Jy  sigma=1.366767
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060510Jy  sigma=1.366767
! Fit after  self-cal, rms=0.060694Jy  sigma=1.364720
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.003 mas, bmaj=1.605 mas, bpa=-83.07 degrees
! Estimated noise=0.184089 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000348987 Jy
! Component: 100  -  total flux cleaned = 0.0003851 Jy
! Component: 150  -  total flux cleaned = 0.000403314 Jy
! Component: 200  -  total flux cleaned = 0.000395982 Jy
! Total flux subtracted in 200 components = 0.000395982 Jy
! Clean residual min=-0.000947 max=0.001119 Jy/beam
! Clean residual mean=0.000002 rms=0.000241 Jy/beam
! Combined flux in latest and established models = 0.0768222 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 49 components and 0.0768222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060688Jy  sigma=1.364613
! Fit after  self-cal, rms=0.060707Jy  sigma=1.364431
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (46.2, -10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000523468 Jy
! Component: 100  -  total flux cleaned = 0.000639046 Jy
! Component: 150  -  total flux cleaned = 0.000705952 Jy
! Component: 200  -  total flux cleaned = 0.000790934 Jy
! Total flux subtracted in 200 components = 0.000790934 Jy
! Clean residual min=-0.000907 max=0.001068 Jy/beam
! Clean residual mean=0.000001 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0776131 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 60 components and 0.0776131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060687Jy  sigma=1.363981
! Fit after  self-cal, rms=0.060683Jy  sigma=1.363913
! Inverting map 
! Added new window around map position (-14, 21).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000860039 Jy
! Component: 100  -  total flux cleaned = 0.000963652 Jy
! Component: 150  -  total flux cleaned = 0.000981392 Jy
! Component: 200  -  total flux cleaned = 0.00101327 Jy
! Total flux subtracted in 200 components = 0.00101327 Jy
! Clean residual min=-0.000911 max=0.001052 Jy/beam
! Clean residual mean=0.000000 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0786263 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 71 components and 0.0786263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060665Jy  sigma=1.363553
! Fit after  self-cal, rms=0.060663Jy  sigma=1.363517
! Inverting map 
! Added new window around map position (45.4, 31.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000670881 Jy
! Component: 100  -  total flux cleaned = 0.000870422 Jy
! Component: 150  -  total flux cleaned = 0.00101113 Jy
! Component: 200  -  total flux cleaned = 0.00110807 Jy
! Total flux subtracted in 200 components = 0.00110807 Jy
! Clean residual min=-0.000883 max=0.000946 Jy/beam
! Clean residual mean=0.000001 rms=0.000215 Jy/beam
! Combined flux in latest and established models = 0.0797344 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.0797344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060646Jy  sigma=1.363135
! Fit after  self-cal, rms=0.060644Jy  sigma=1.363102
! Inverting map 
! Added new window around map position (-16.8, -16.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000701287 Jy
! Component: 100  -  total flux cleaned = 0.000836876 Jy
! Component: 150  -  total flux cleaned = 0.000854653 Jy
! Component: 200  -  total flux cleaned = 0.000870049 Jy
! Total flux subtracted in 200 components = 0.000870049 Jy
! Clean residual min=-0.000870 max=0.000895 Jy/beam
! Clean residual mean=0.000000 rms=0.000207 Jy/beam
! Combined flux in latest and established models = 0.0806045 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 98 components and 0.0806044 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060629Jy  sigma=1.362771
! Fit after  self-cal, rms=0.060626Jy  sigma=1.362743
! Inverting map 
! Added new window around map position (26.2, 40).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00048583 Jy
! Component: 100  -  total flux cleaned = 0.000579113 Jy
! Component: 150  -  total flux cleaned = 0.00072923 Jy
! Component: 200  -  total flux cleaned = 0.000806544 Jy
! Total flux subtracted in 200 components = 0.000806544 Jy
! Clean residual min=-0.000859 max=0.000847 Jy/beam
! Clean residual mean=-0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.081411 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 115 components and 0.081411 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060612Jy  sigma=1.362433
! Fit after  self-cal, rms=0.060610Jy  sigma=1.362407
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060610Jy  sigma=1.362407
! Fit after  self-cal, rms=0.060363Jy  sigma=1.362305
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.604 mas, bpa=-82.88 degrees
! Estimated noise=0.183431 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000367679 Jy
! Component: 100  -  total flux cleaned = 0.000493838 Jy
! Component: 150  -  total flux cleaned = 0.00058206 Jy
! Component: 200  -  total flux cleaned = 0.000624503 Jy
! Total flux subtracted in 200 components = 0.000624503 Jy
! Clean residual min=-0.000825 max=0.000842 Jy/beam
! Clean residual mean=-0.000001 rms=0.000196 Jy/beam
! Combined flux in latest and established models = 0.0820355 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 121 components and 0.0820355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060355Jy  sigma=1.362145
! Fit after  self-cal, rms=0.060354Jy  sigma=1.362133
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116759 Jy
! Component: 100  -  total flux cleaned = 0.000170079 Jy
! Component: 150  -  total flux cleaned = 0.000169492 Jy
! Component: 200  -  total flux cleaned = 0.000156984 Jy
! Total flux subtracted in 200 components = 0.000156984 Jy
! Clean residual min=-0.000820 max=0.000833 Jy/beam
! Clean residual mean=-0.000001 rms=0.000194 Jy/beam
! Combined flux in latest and established models = 0.0821925 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 127 components and 0.0821925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060349Jy  sigma=1.362023
! Fit after  self-cal, rms=0.060348Jy  sigma=1.362018
! Inverting map 
! Added new window around map position (-30.6, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.32456e-06 Jy
! Component: 100  -  total flux cleaned = -2.49706e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136303 Jy
! Component: 200  -  total flux cleaned = -0.000237838 Jy
! Total flux subtracted in 200 components = -0.000237838 Jy
! Clean residual min=-0.000806 max=0.000711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0819546 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 139 components and 0.0819546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060331Jy  sigma=1.361671
! Fit after  self-cal, rms=0.060330Jy  sigma=1.361635
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060330Jy  sigma=1.361635
! Fit after  self-cal, rms=0.060217Jy  sigma=1.361606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.873 mas, bpa=89.64 degrees
! Estimated noise=0.22715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000198631 Jy
! Component: 100  -  total flux cleaned = 0.000185901 Jy
! Component: 150  -  total flux cleaned = 0.000231588 Jy
! Component: 200  -  total flux cleaned = 0.000304498 Jy
! Total flux subtracted in 200 components = 0.000304498 Jy
! Clean residual min=-0.000664 max=0.000669 Jy/beam
! Clean residual mean=-0.000000 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0822591 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 157 components and 0.0822591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060214Jy  sigma=1.361544
! Fit after  self-cal, rms=0.060211Jy  sigma=1.361533
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.15884e-06 Jy
! Component: 100  -  total flux cleaned = 6.3413e-05 Jy
! Component: 150  -  total flux cleaned = 0.000100363 Jy
! Component: 200  -  total flux cleaned = 0.000144362 Jy
! Total flux subtracted in 200 components = 0.000144362 Jy
! Clean residual min=-0.000657 max=0.000659 Jy/beam
! Clean residual mean=-0.000000 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0824035 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 169 components and 0.0824035 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060209Jy  sigma=1.361487
! Fit after  self-cal, rms=0.060208Jy  sigma=1.361488
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.605 mas, bpa=-82.9 degrees
! Estimated noise=0.18318 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.605 at -82.9 degrees (North through East)
! Clean map  min=-0.00085543  max=0.059289 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7302 mas, bmaj=1.249 mas, bpa=-78.94 degrees
! Estimated noise=0.382287 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0449514 Jy
! Component: 100  -  total flux cleaned = 0.0565367 Jy
! Component: 150  -  total flux cleaned = 0.062726 Jy
! Component: 200  -  total flux cleaned = 0.0667177 Jy
! Total flux subtracted in 200 components = 0.0667177 Jy
! Clean residual min=-0.002351 max=0.002535 Jy/beam
! Clean residual mean=-0.000004 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.0667177 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0667177 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.605 mas, bpa=-82.9 degrees
! Estimated noise=0.18318 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00418725 Jy
! Component: 100  -  total flux cleaned = 0.00628404 Jy
! Component: 150  -  total flux cleaned = 0.00757736 Jy
! Component: 200  -  total flux cleaned = 0.00874794 Jy
! Total flux subtracted in 200 components = 0.00874794 Jy
! Clean residual min=-0.001121 max=0.001143 Jy/beam
! Clean residual mean=-0.000003 rms=0.000259 Jy/beam
! Combined flux in latest and established models = 0.0754656 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 43 components and 0.0754656 Jy
! Inverting map 
! Added new window around map position (10, 33).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103773 Jy
! Component: 100  -  total flux cleaned = 0.00174505 Jy
! Component: 150  -  total flux cleaned = 0.00241302 Jy
! Component: 200  -  total flux cleaned = 0.00269951 Jy
! Total flux subtracted in 200 components = 0.00269951 Jy
! Clean residual min=-0.001006 max=0.000871 Jy/beam
! Clean residual mean=-0.000003 rms=0.000226 Jy/beam
! Combined flux in latest and established models = 0.0781652 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 63 components and 0.0781652 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.092 mas, bmaj=2.873 mas, bpa=89.64 degrees
! Estimated noise=0.22715 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110692 Jy
! Component: 100  -  total flux cleaned = 0.00146092 Jy
! Component: 150  -  total flux cleaned = 0.00170461 Jy
! Component: 200  -  total flux cleaned = 0.00183367 Jy
! Total flux subtracted in 200 components = 0.00183367 Jy
! Clean residual min=-0.000832 max=0.000802 Jy/beam
! Clean residual mean=-0.000001 rms=0.000214 Jy/beam
! Combined flux in latest and established models = 0.0799988 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116869 Jy
! Component: 100  -  total flux cleaned = 0.000225673 Jy
! Component: 150  -  total flux cleaned = 0.000376782 Jy
! Component: 200  -  total flux cleaned = 0.000503586 Jy
! Total flux subtracted in 200 components = 0.000503586 Jy
! Clean residual min=-0.000730 max=0.000724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.0805024 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 112 components and 0.0805024 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.001 mas, bmaj=1.605 mas, bpa=-82.9 degrees
! Estimated noise=0.18318 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.55805e-05 Jy
! Component: 100  -  total flux cleaned = 0.000169306 Jy
! Component: 150  -  total flux cleaned = 0.000243985 Jy
! Component: 200  -  total flux cleaned = 0.000336215 Jy
! Total flux subtracted in 200 components = 0.000336215 Jy
! Clean residual min=-0.000888 max=0.000828 Jy/beam
! Clean residual mean=-0.000001 rms=0.000191 Jy/beam
! Combined flux in latest and established models = 0.0808386 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 126 components and 0.0808386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.060235Jy  sigma=1.362023
! Fit after  self-cal, rms=0.060229Jy  sigma=1.361875
wmodel /J0339+6008_X_map.mod
! wmodel: Unable to open new model file: /J0339+6008_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0339+6008_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.001 x 1.605 at -82.9 degrees (North through East)
! Clean map  min=-0.00084275  max=0.059303 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0339+6008_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0593029 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00018595 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.940678 0.940678 1.88136 3.76271 7.52542 15.0508 30.1017 60.2034
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.059 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  318.918 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0339+6008_X_dfm.log closed on Thu May 19 23:01:02 2016