! Started logfile: /scr/pima/bg219i_uvs/J0325+2224_X_dfm.log on Thu May 19 23:00:51 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0325+2224_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0325+2224_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.88254 visibilities/baseline/integration-bin.
! Found source: J0325+2224
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3336 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0325+2224_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.363842Jy  sigma=21.578993
! Fit after  self-cal, rms=0.168179Jy  sigma=2.518660
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7329 mas, bmaj=1.893 mas, bpa=22.26 degrees
! Estimated noise=1.32937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.673862 Jy
! Component: 100  -  total flux cleaned = 0.825289 Jy
! Total flux subtracted in 100 components = 0.825289 Jy
! Clean residual min=-0.023376 max=0.055556 Jy/beam
! Clean residual mean=0.000065 rms=0.007464 Jy/beam
! Combined flux in latest and established models = 0.825289 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.825289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.157502Jy  sigma=2.403564
! Fit after  self-cal, rms=0.157356Jy  sigma=2.400556
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0650305 Jy
! Component: 100  -  total flux cleaned = 0.102066 Jy
! Total flux subtracted in 100 components = 0.102066 Jy
! Clean residual min=-0.016567 max=0.031148 Jy/beam
! Clean residual mean=0.000026 rms=0.004191 Jy/beam
! Combined flux in latest and established models = 0.927355 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 9 components and 0.927355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109987Jy  sigma=1.613728
! Fit after  self-cal, rms=0.109550Jy  sigma=1.607887
! Inverting map 
! Added new window around map position (1.4, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0300387 Jy
! Component: 100  -  total flux cleaned = 0.0483157 Jy
! Total flux subtracted in 100 components = 0.0483157 Jy
! Clean residual min=-0.013178 max=0.015480 Jy/beam
! Clean residual mean=0.000010 rms=0.002931 Jy/beam
! Combined flux in latest and established models = 0.975671 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 15 components and 0.975671 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096168Jy  sigma=1.380577
! Fit after  self-cal, rms=0.095871Jy  sigma=1.374286
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9331 mas, bmaj=2.114 mas, bpa=19.68 degrees
! Estimated noise=0.888989 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (10.6, -18.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0240018 Jy
! Component: 100  -  total flux cleaned = 0.0391976 Jy
! Component: 150  -  total flux cleaned = 0.0497 Jy
! Component: 200  -  total flux cleaned = 0.0572285 Jy
! Total flux subtracted in 200 components = 0.0572285 Jy
! Clean residual min=-0.008476 max=0.011973 Jy/beam
! Clean residual mean=0.000002 rms=0.002329 Jy/beam
! Combined flux in latest and established models = 1.0329 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 40 components and 1.0329 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088691Jy  sigma=1.251488
! Fit after  self-cal, rms=0.088384Jy  sigma=1.244063
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9331 x 2.114 at 19.68 degrees (North through East)
! Clean map  min=-0.0082635  max=0.89414 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.06     KP        0.99     
!   LA        0.98     MK        1.02     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.08     KP        0.98     
!   LA        0.99     MK        1.01     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.02     KP        0.99     
!   LA        0.98     MK        0.96     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.00     OV        1.00     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        0.96     
!   LA        1.01     MK        0.98     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.00     KP        0.98     
!   LA        1.00     MK        0.97     NL        1.01     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.04     KP        0.98     
!   LA        0.98     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.96     
!   LA        0.97     MK        0.98     NL        1.01     OV        0.97     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.088384Jy  sigma=1.244063
! Fit after  self-cal, rms=0.085235Jy  sigma=1.190269
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9352 mas, bmaj=2.121 mas, bpa=19.77 degrees
! Estimated noise=0.884067 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000144588 Jy
! Component: 100  -  total flux cleaned = -0.00111838 Jy
! Component: 150  -  total flux cleaned = -0.0016087 Jy
! Component: 200  -  total flux cleaned = -0.00183204 Jy
! Total flux subtracted in 200 components = -0.00183204 Jy
! Clean residual min=-0.005691 max=0.006533 Jy/beam
! Clean residual mean=0.000004 rms=0.001459 Jy/beam
! Combined flux in latest and established models = 1.03107 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 56 components and 1.03107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084661Jy  sigma=1.184927
! Fit after  self-cal, rms=0.084662Jy  sigma=1.184745
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084662Jy  sigma=1.184745
! Fit after  self-cal, rms=0.084586Jy  sigma=1.184012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9356 mas, bmaj=2.123 mas, bpa=19.77 degrees
! Estimated noise=0.882941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00227788 Jy
! Component: 100  -  total flux cleaned = -0.00270547 Jy
! Component: 150  -  total flux cleaned = -0.00309216 Jy
! Component: 200  -  total flux cleaned = -0.00318403 Jy
! Total flux subtracted in 200 components = -0.00318403 Jy
! Clean residual min=-0.005253 max=0.006388 Jy/beam
! Clean residual mean=0.000005 rms=0.001394 Jy/beam
! Combined flux in latest and established models = 1.02788 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 68 components and 1.02788 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084248Jy  sigma=1.181678
! Fit after  self-cal, rms=0.084250Jy  sigma=1.181613
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00572648 Jy
! Component: 100  -  total flux cleaned = 0.00723714 Jy
! Component: 150  -  total flux cleaned = 0.00752022 Jy
! Component: 200  -  total flux cleaned = 0.00784739 Jy
! Total flux subtracted in 200 components = 0.00784739 Jy
! Clean residual min=-0.004775 max=0.005352 Jy/beam
! Clean residual mean=0.000005 rms=0.001232 Jy/beam
! Combined flux in latest and established models = 1.03573 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 1.03573 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083712Jy  sigma=1.176351
! Fit after  self-cal, rms=0.083704Jy  sigma=1.176168
! Inverting map 
! Added new window around map position (-1, -10).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438478 Jy
! Component: 100  -  total flux cleaned = 0.00607487 Jy
! Component: 150  -  total flux cleaned = 0.00752123 Jy
! Component: 200  -  total flux cleaned = 0.008731 Jy
! Total flux subtracted in 200 components = 0.008731 Jy
! Clean residual min=-0.004603 max=0.004360 Jy/beam
! Clean residual mean=0.000005 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 1.04446 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 114 components and 1.04446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083334Jy  sigma=1.173223
! Fit after  self-cal, rms=0.083322Jy  sigma=1.173051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083322Jy  sigma=1.173051
! Fit after  self-cal, rms=0.083175Jy  sigma=1.171253
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9361 mas, bmaj=2.125 mas, bpa=19.8 degrees
! Estimated noise=0.880972 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000373675 Jy
! Component: 100  -  total flux cleaned = 0.000747986 Jy
! Component: 150  -  total flux cleaned = 0.00135009 Jy
! Component: 200  -  total flux cleaned = 0.00185041 Jy
! Total flux subtracted in 200 components = 0.00185041 Jy
! Clean residual min=-0.004304 max=0.004275 Jy/beam
! Clean residual mean=0.000003 rms=0.001046 Jy/beam
! Combined flux in latest and established models = 1.04631 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 124 components and 1.04631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082975Jy  sigma=1.170568
! Fit after  self-cal, rms=0.082976Jy  sigma=1.170555
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000845602 Jy
! Component: 100  -  total flux cleaned = 0.00129291 Jy
! Component: 150  -  total flux cleaned = 0.00166371 Jy
! Component: 200  -  total flux cleaned = 0.00206757 Jy
! Total flux subtracted in 200 components = 0.00206757 Jy
! Clean residual min=-0.004225 max=0.004223 Jy/beam
! Clean residual mean=0.000004 rms=0.001019 Jy/beam
! Combined flux in latest and established models = 1.04838 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 130 components and 1.04838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082890Jy  sigma=1.169985
! Fit after  self-cal, rms=0.082890Jy  sigma=1.169975
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082890Jy  sigma=1.169975
! Fit after  self-cal, rms=0.082828Jy  sigma=1.169579
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.992 mas, bmaj=2.89 mas, bpa=0.8065 degrees
! Estimated noise=1.12024 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527083 Jy
! Component: 100  -  total flux cleaned = 0.00118423 Jy
! Component: 150  -  total flux cleaned = 0.00186663 Jy
! Component: 200  -  total flux cleaned = 0.00237298 Jy
! Total flux subtracted in 200 components = 0.00237298 Jy
! Clean residual min=-0.005202 max=0.005807 Jy/beam
! Clean residual mean=0.000012 rms=0.001567 Jy/beam
! Combined flux in latest and established models = 1.05075 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 147 components and 1.05075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082724Jy  sigma=1.169760
! Fit after  self-cal, rms=0.082718Jy  sigma=1.169716
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.52113e-05 Jy
! Component: 100  -  total flux cleaned = 0.000294679 Jy
! Component: 150  -  total flux cleaned = 0.000572422 Jy
! Component: 200  -  total flux cleaned = 0.000745687 Jy
! Total flux subtracted in 200 components = 0.000745687 Jy
! Clean residual min=-0.005042 max=0.005709 Jy/beam
! Clean residual mean=0.000013 rms=0.001528 Jy/beam
! Combined flux in latest and established models = 1.0515 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 157 components and 1.0515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082692Jy  sigma=1.169791
! Fit after  self-cal, rms=0.082690Jy  sigma=1.169776
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9363 mas, bmaj=2.125 mas, bpa=19.82 degrees
! Estimated noise=0.879557 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9363 x 2.125 at 19.82 degrees (North through East)
! Clean map  min=-0.003579  max=0.88624 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082690Jy  sigma=1.169776
! Fit after  self-cal, rms=0.079151Jy  sigma=1.100706
! Inverting map and beam 
! Estimated beam: bmin=0.9368 mas, bmaj=2.126 mas, bpa=19.87 degrees
! Estimated noise=0.872646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00585246 Jy
! Component: 100  -  total flux cleaned = -0.00695701 Jy
! Component: 150  -  total flux cleaned = -0.00771597 Jy
! Component: 200  -  total flux cleaned = -0.00843643 Jy
! Total flux subtracted in 200 components = -0.00843643 Jy
! Clean residual min=-0.005351 max=0.004771 Jy/beam
! Clean residual mean=0.000005 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 1.04306 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 179 components and 1.04306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078445Jy  sigma=1.094831
! Fit after  self-cal, rms=0.078448Jy  sigma=1.094755
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000488406 Jy
! Component: 100  -  total flux cleaned = -0.000625207 Jy
! Component: 150  -  total flux cleaned = -0.00075203 Jy
! Component: 200  -  total flux cleaned = -0.00098424 Jy
! Total flux subtracted in 200 components = -0.00098424 Jy
! Clean residual min=-0.005221 max=0.004631 Jy/beam
! Clean residual mean=0.000007 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 1.04208 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 188 components and 1.04208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078318Jy  sigma=1.093800
! Fit after  self-cal, rms=0.078322Jy  sigma=1.093761
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078322Jy  sigma=1.093761
! Fit after  self-cal, rms=0.077791Jy  sigma=1.087604
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7335 mas, bmaj=1.908 mas, bpa=22.51 degrees
! Estimated noise=1.30493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.660964 Jy
! Component: 100  -  total flux cleaned = 0.811482 Jy
! Component: 150  -  total flux cleaned = 0.872815 Jy
! Component: 200  -  total flux cleaned = 0.909663 Jy
! Total flux subtracted in 200 components = 0.909663 Jy
! Clean residual min=-0.013524 max=0.019665 Jy/beam
! Clean residual mean=0.000019 rms=0.003435 Jy/beam
! Combined flux in latest and established models = 0.909663 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.909663 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.937 mas, bmaj=2.127 mas, bpa=19.92 degrees
! Estimated noise=0.866521 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0362668 Jy
! Component: 100  -  total flux cleaned = 0.0580667 Jy
! Component: 150  -  total flux cleaned = 0.0728593 Jy
! Component: 200  -  total flux cleaned = 0.0831968 Jy
! Total flux subtracted in 200 components = 0.0831968 Jy
! Clean residual min=-0.007132 max=0.009010 Jy/beam
! Clean residual mean=0.000003 rms=0.002063 Jy/beam
! Combined flux in latest and established models = 0.992859 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 35 components and 0.992859 Jy
! Inverting map 
! Added new window around map position (-4.6, 9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00914552 Jy
! Component: 100  -  total flux cleaned = 0.0159487 Jy
! Component: 150  -  total flux cleaned = 0.0209668 Jy
! Component: 200  -  total flux cleaned = 0.0240565 Jy
! Total flux subtracted in 200 components = 0.0240565 Jy
! Clean residual min=-0.005643 max=0.006160 Jy/beam
! Clean residual mean=0.000006 rms=0.001535 Jy/beam
! Combined flux in latest and established models = 1.01692 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 63 components and 1.01692 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.995 mas, bmaj=2.889 mas, bpa=0.8359 degrees
! Estimated noise=1.10223 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00565288 Jy
! Component: 100  -  total flux cleaned = 0.00746922 Jy
! Component: 150  -  total flux cleaned = 0.00851473 Jy
! Component: 200  -  total flux cleaned = 0.00929308 Jy
! Total flux subtracted in 200 components = 0.00929308 Jy
! Clean residual min=-0.007108 max=0.007200 Jy/beam
! Clean residual mean=0.000016 rms=0.002162 Jy/beam
! Combined flux in latest and established models = 1.02621 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009098 Jy
! Component: 100  -  total flux cleaned = 0.00152203 Jy
! Component: 150  -  total flux cleaned = 0.00216382 Jy
! Component: 200  -  total flux cleaned = 0.00275552 Jy
! Total flux subtracted in 200 components = 0.00275552 Jy
! Clean residual min=-0.006865 max=0.006753 Jy/beam
! Clean residual mean=0.000019 rms=0.002033 Jy/beam
! Combined flux in latest and established models = 1.02896 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 105 components and 1.02896 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.937 mas, bmaj=2.127 mas, bpa=19.92 degrees
! Estimated noise=0.866521 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00208004 Jy
! Component: 100  -  total flux cleaned = 0.00241174 Jy
! Component: 150  -  total flux cleaned = 0.00270852 Jy
! Component: 200  -  total flux cleaned = 0.00280336 Jy
! Total flux subtracted in 200 components = 0.00280336 Jy
! Clean residual min=-0.004978 max=0.004681 Jy/beam
! Clean residual mean=0.000009 rms=0.001216 Jy/beam
! Combined flux in latest and established models = 1.03177 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 133 components and 1.03177 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077411Jy  sigma=1.087801
! Fit after  self-cal, rms=0.077377Jy  sigma=1.087118
wmodel /J0325+2224_X_map.mod
! wmodel: Unable to open new model file: /J0325+2224_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0325+2224_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.937 x 2.127 at 19.92 degrees (North through East)
! Clean map  min=-0.0047373  max=0.86959 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0325+2224_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.869592 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00120234 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.414794 0.414794 0.829588 1.65918 3.31835 6.6367 13.2734 26.5468 53.0936
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0036 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.869 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  723.25 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0325+2224_X_dfm.log closed on Thu May 19 23:00:54 2016