! Started logfile: /scr/pima/bg219i_uvs/J0257+6556_X_dfm.log on Thu May 19 23:00:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0257+6556_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0257+6556_X_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897872 visibilities/baseline/integration-bin.
! Found source: J0257+6556
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 22788 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0257+6556_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025244Jy  sigma=24.558899
! Fit after  self-cal, rms=0.807153Jy  sigma=19.067414
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7003 mas, bmaj=1.203 mas, bpa=88.04 degrees
! Estimated noise=0.446048 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.130983 Jy
! Component: 100  -  total flux cleaned = 0.194237 Jy
! Total flux subtracted in 100 components = 0.194237 Jy
! Clean residual min=-0.015976 max=0.032344 Jy/beam
! Clean residual mean=-0.000006 rms=0.003664 Jy/beam
! Combined flux in latest and established models = 0.194237 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.194237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.112941Jy  sigma=2.640420
! Fit after  self-cal, rms=0.109439Jy  sigma=2.579599
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.048874 Jy
! Component: 100  -  total flux cleaned = 0.0755045 Jy
! Total flux subtracted in 100 components = 0.0755045 Jy
! Clean residual min=-0.008226 max=0.012961 Jy/beam
! Clean residual mean=0.000000 rms=0.001782 Jy/beam
! Combined flux in latest and established models = 0.269742 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 12 components and 0.269742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075869Jy  sigma=1.712266
! Fit after  self-cal, rms=0.074152Jy  sigma=1.680927
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0191983 Jy
! Component: 100  -  total flux cleaned = 0.0298579 Jy
! Total flux subtracted in 100 components = 0.0298579 Jy
! Clean residual min=-0.006766 max=0.009001 Jy/beam
! Clean residual mean=0.000003 rms=0.001303 Jy/beam
! Combined flux in latest and established models = 0.2996 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 18 components and 0.2996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067419Jy  sigma=1.504013
! Fit after  self-cal, rms=0.067249Jy  sigma=1.500632
! Inverting map 
! Added new window around map position (0.6, -1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00981708 Jy
! Component: 100  -  total flux cleaned = 0.013003 Jy
! Total flux subtracted in 100 components = 0.013003 Jy
! Clean residual min=-0.006466 max=0.006309 Jy/beam
! Clean residual mean=0.000004 rms=0.001185 Jy/beam
! Combined flux in latest and established models = 0.312603 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 23 components and 0.312603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065573Jy  sigma=1.460502
! Fit after  self-cal, rms=0.065453Jy  sigma=1.458421
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.953 mas, bmaj=1.567 mas, bpa=87.16 degrees
! Estimated noise=0.201875 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00676264 Jy
! Component: 100  -  total flux cleaned = 0.00802677 Jy
! Component: 150  -  total flux cleaned = 0.00812897 Jy
! Component: 200  -  total flux cleaned = 0.00831115 Jy
! Total flux subtracted in 200 components = 0.00831115 Jy
! Clean residual min=-0.003910 max=0.003570 Jy/beam
! Clean residual mean=0.000016 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.320914 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 30 components and 0.320914 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064684Jy  sigma=1.441814
! Fit after  self-cal, rms=0.064481Jy  sigma=1.438097
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.953 x 1.567 at 87.16 degrees (North through East)
! Clean map  min=-0.003256  max=0.18539 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.00     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.03     OV        0.99     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.01     KP        0.99     
!   LA        0.99     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.97     MK        1.02     NL        1.02     OV        0.96     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.00     
!   LA        1.00     MK        0.98     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.00     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.01     KP        1.02     
!   LA        0.99     MK        1.03     NL        1.03     OV        0.99     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.98     KP        1.00     
!   LA        1.01     MK        0.97     NL        1.02     OV        0.96     
!   PT        1.01     SC        1.05     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.00     KP        1.01     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.96     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.00     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.97     KP        1.01     
!   LA        1.00     MK        0.99     NL        1.02     OV        0.97     
!   PT        1.01     SC        0.97     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.03     HN        1.00     KP        1.00     
!   LA        0.98     MK        0.98     NL        1.01     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        0.97     KP        0.99     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.98     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.064481Jy  sigma=1.438097
! Fit after  self-cal, rms=0.064035Jy  sigma=1.432972
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9525 mas, bmaj=1.567 mas, bpa=87.02 degrees
! Estimated noise=0.201254 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000493575 Jy
! Component: 100  -  total flux cleaned = -0.000498921 Jy
! Component: 150  -  total flux cleaned = -0.000500997 Jy
! Component: 200  -  total flux cleaned = -0.000705818 Jy
! Total flux subtracted in 200 components = -0.000705818 Jy
! Clean residual min=-0.003273 max=0.002902 Jy/beam
! Clean residual mean=0.000015 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.320208 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.320208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063682Jy  sigma=1.426731
! Fit after  self-cal, rms=0.063564Jy  sigma=1.424407
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063564Jy  sigma=1.424407
! Fit after  self-cal, rms=0.063197Jy  sigma=1.421762
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9499 mas, bmaj=1.562 mas, bpa=86.63 degrees
! Estimated noise=0.200296 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.96008e-05 Jy
! Component: 100  -  total flux cleaned = 1.59942e-05 Jy
! Component: 150  -  total flux cleaned = 1.79264e-05 Jy
! Component: 200  -  total flux cleaned = 1.99017e-05 Jy
! Total flux subtracted in 200 components = 1.99017e-05 Jy
! Clean residual min=-0.002926 max=0.002326 Jy/beam
! Clean residual mean=0.000008 rms=0.000500 Jy/beam
! Combined flux in latest and established models = 0.320228 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 36 components and 0.320228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062976Jy  sigma=1.417877
! Fit after  self-cal, rms=0.062902Jy  sigma=1.416261
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.96118e-05 Jy
! Component: 100  -  total flux cleaned = 0.000102159 Jy
! Component: 150  -  total flux cleaned = 0.000100023 Jy
! Component: 200  -  total flux cleaned = 1.4273e-05 Jy
! Total flux subtracted in 200 components = 1.4273e-05 Jy
! Clean residual min=-0.002619 max=0.002087 Jy/beam
! Clean residual mean=0.000008 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.320242 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.320242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062754Jy  sigma=1.413700
! Fit after  self-cal, rms=0.062698Jy  sigma=1.412507
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062698Jy  sigma=1.412507
! Fit after  self-cal, rms=0.062505Jy  sigma=1.412432
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9486 mas, bmaj=1.56 mas, bpa=86.52 degrees
! Estimated noise=0.19982 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.17111e-06 Jy
! Component: 100  -  total flux cleaned = 3.93194e-05 Jy
! Component: 150  -  total flux cleaned = 7.94067e-05 Jy
! Component: 200  -  total flux cleaned = 1.1585e-05 Jy
! Total flux subtracted in 200 components = 1.1585e-05 Jy
! Clean residual min=-0.002378 max=0.001908 Jy/beam
! Clean residual mean=0.000008 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.320254 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.320254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062399Jy  sigma=1.410574
! Fit after  self-cal, rms=0.062360Jy  sigma=1.409704
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.36763e-05 Jy
! Component: 100  -  total flux cleaned = 4.90162e-05 Jy
! Component: 150  -  total flux cleaned = 4.53808e-05 Jy
! Component: 200  -  total flux cleaned = 1.57379e-05 Jy
! Total flux subtracted in 200 components = 1.57379e-05 Jy
! Clean residual min=-0.002152 max=0.001794 Jy/beam
! Clean residual mean=0.000008 rms=0.000402 Jy/beam
! Combined flux in latest and established models = 0.320269 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 39 components and 0.32027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062287Jy  sigma=1.408438
! Fit after  self-cal, rms=0.062261Jy  sigma=1.407829
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062261Jy  sigma=1.407829
! Fit after  self-cal, rms=0.062129Jy  sigma=1.407796
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=2.922 mas, bpa=78.83 degrees
! Estimated noise=0.255018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167539 Jy
! Component: 100  -  total flux cleaned = 0.000219041 Jy
! Component: 150  -  total flux cleaned = 0.000200471 Jy
! Component: 200  -  total flux cleaned = 0.000186977 Jy
! Total flux subtracted in 200 components = 0.000186977 Jy
! Clean residual min=-0.001495 max=0.001639 Jy/beam
! Clean residual mean=0.000018 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.320457 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.320457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062112Jy  sigma=1.407445
! Fit after  self-cal, rms=0.062095Jy  sigma=1.407121
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.06896e-05 Jy
! Component: 100  -  total flux cleaned = 5.48829e-05 Jy
! Component: 150  -  total flux cleaned = 6.86854e-05 Jy
! Component: 200  -  total flux cleaned = 5.9194e-05 Jy
! Total flux subtracted in 200 components = 5.9194e-05 Jy
! Clean residual min=-0.001463 max=0.001603 Jy/beam
! Clean residual mean=0.000018 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.320516 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.320516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.062079Jy  sigma=1.406810
! Fit after  self-cal, rms=0.062065Jy  sigma=1.406528
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=1.559 mas, bpa=86.45 degrees
! Estimated noise=0.199476 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9477 x 1.559 at 86.45 degrees (North through East)
! Clean map  min=-0.0017088  max=0.1816 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6974 mas, bmaj=1.198 mas, bpa=87.26 degrees
! Estimated noise=0.438554 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.136905 Jy
! Component: 100  -  total flux cleaned = 0.204007 Jy
! Component: 150  -  total flux cleaned = 0.241724 Jy
! Component: 200  -  total flux cleaned = 0.26521 Jy
! Total flux subtracted in 200 components = 0.26521 Jy
! Clean residual min=-0.005459 max=0.012394 Jy/beam
! Clean residual mean=-0.000002 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.26521 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.26521 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=1.559 mas, bpa=86.45 degrees
! Estimated noise=0.199476 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0251493 Jy
! Component: 100  -  total flux cleaned = 0.0382805 Jy
! Component: 150  -  total flux cleaned = 0.0458126 Jy
! Component: 200  -  total flux cleaned = 0.0502672 Jy
! Total flux subtracted in 200 components = 0.0502672 Jy
! Clean residual min=-0.002020 max=0.002252 Jy/beam
! Clean residual mean=0.000008 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.315477 Jy
! Adding 30 model components to the UV plane model.
! The established model now contains 37 components and 0.315477 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00264996 Jy
! Component: 100  -  total flux cleaned = 0.00423404 Jy
! Component: 150  -  total flux cleaned = 0.00489878 Jy
! Component: 200  -  total flux cleaned = 0.0050284 Jy
! Total flux subtracted in 200 components = 0.0050284 Jy
! Clean residual min=-0.001743 max=0.001631 Jy/beam
! Clean residual mean=0.000008 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.320505 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 47 components and 0.320505 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=2.922 mas, bpa=78.83 degrees
! Estimated noise=0.255018 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000495515 Jy
! Component: 100  -  total flux cleaned = 0.000546872 Jy
! Component: 150  -  total flux cleaned = 0.000561836 Jy
! Component: 200  -  total flux cleaned = 0.000533994 Jy
! Total flux subtracted in 200 components = 0.000533994 Jy
! Clean residual min=-0.001597 max=0.001690 Jy/beam
! Clean residual mean=0.000018 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.321039 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.36719e-05 Jy
! Component: 100  -  total flux cleaned = -3.88218e-05 Jy
! Component: 150  -  total flux cleaned = -5.07931e-05 Jy
! Component: 200  -  total flux cleaned = -6.25152e-05 Jy
! Total flux subtracted in 200 components = -6.25152e-05 Jy
! Clean residual min=-0.001571 max=0.001656 Jy/beam
! Clean residual mean=0.000018 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.320977 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 57 components and 0.320977 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9477 mas, bmaj=1.559 mas, bpa=86.45 degrees
! Estimated noise=0.199476 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000273271 Jy
! Component: 100  -  total flux cleaned = -0.000297985 Jy
! Component: 150  -  total flux cleaned = -0.000299221 Jy
! Component: 200  -  total flux cleaned = -0.000370379 Jy
! Total flux subtracted in 200 components = -0.000370379 Jy
! Clean residual min=-0.001624 max=0.001603 Jy/beam
! Clean residual mean=0.000008 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.320606 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.320606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.061917Jy  sigma=1.404116
! Fit after  self-cal, rms=0.061868Jy  sigma=1.402963
wmodel /J0257+6556_X_map.mod
! wmodel: Unable to open new model file: /J0257+6556_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0257+6556_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9477 x 1.559 at 86.45 degrees (North through East)
! Clean map  min=-0.0013346  max=0.17958 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0257+6556_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.179583 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000340791 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.569302 0.569302 1.1386 2.27721 4.55442 9.10883 18.2177 36.4353 72.8707
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.179 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  526.961 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0257+6556_X_dfm.log closed on Thu May 19 23:00:30 2016