! Started logfile: /scr/pima/bg219i_uvs/J0237+2848_S_dfm.log on Thu May 19 23:00:14 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0237+2848_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0237+2848_S_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.877778 visibilities/baseline/integration-bin.
! Found source: J0237+2848
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2212 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0237+2848_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.356722Jy  sigma=36.283397
! Fit after  self-cal, rms=1.242443Jy  sigma=18.614274
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.08 mas, bmaj=7.29 mas, bpa=21.26 degrees
! Estimated noise=1.34077 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.58322 Jy
! Component: 100  -  total flux cleaned = 2.01381 Jy
! Total flux subtracted in 100 components = 2.01381 Jy
! Clean residual min=-0.081177 max=0.174451 Jy/beam
! Clean residual mean=-0.000151 rms=0.018938 Jy/beam
! Combined flux in latest and established models = 2.01381 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 2.01381 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.400742Jy  sigma=5.870516
! Fit after  self-cal, rms=0.400337Jy  sigma=5.867220
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.177454 Jy
! Component: 100  -  total flux cleaned = 0.266225 Jy
! Total flux subtracted in 100 components = 0.266225 Jy
! Clean residual min=-0.058375 max=0.105231 Jy/beam
! Clean residual mean=-0.000055 rms=0.012629 Jy/beam
! Combined flux in latest and established models = 2.28003 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 2.28003 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.275033Jy  sigma=3.957985
! Fit after  self-cal, rms=0.274194Jy  sigma=3.951218
! Inverting map 
! Added new window around map position (-1.5, 10.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0970761 Jy
! Component: 100  -  total flux cleaned = 0.156868 Jy
! Total flux subtracted in 100 components = 0.156868 Jy
! Clean residual min=-0.042714 max=0.041232 Jy/beam
! Clean residual mean=-0.000058 rms=0.009280 Jy/beam
! Combined flux in latest and established models = 2.4369 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 38 components and 2.4369 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.216199Jy  sigma=3.135471
! Fit after  self-cal, rms=0.210832Jy  sigma=3.064998
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.637 mas, bmaj=7.815 mas, bpa=18.75 degrees
! Estimated noise=1.08062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0774043 Jy
! Component: 100  -  total flux cleaned = 0.131332 Jy
! Component: 150  -  total flux cleaned = 0.171451 Jy
! Component: 200  -  total flux cleaned = 0.201933 Jy
! Total flux subtracted in 200 components = 0.201933 Jy
! Clean residual min=-0.032638 max=0.031815 Jy/beam
! Clean residual mean=-0.000069 rms=0.007604 Jy/beam
! Combined flux in latest and established models = 2.63883 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 83 components and 2.63883 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167452Jy  sigma=2.395449
! Fit after  self-cal, rms=0.164193Jy  sigma=2.345004
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.637 x 7.815 at 18.75 degrees (North through East)
! Clean map  min=-0.029741  max=2.107 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        0.99     
!   LA        1.03     MK        1.02     NL        0.99     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        1.02     KP        0.97     
!   LA        1.00     MK        1.02     NL        1.02     OV        0.97     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.02     KP        0.98     
!   LA        1.00     MK        1.04     NL        1.12     OV        0.98     
!   PT        0.97     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.97     HN        1.03     KP        0.99     
!   LA        1.01     MK        1.04     NL        0.97     OV        0.96     
!   PT        1.01     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.164193Jy  sigma=2.345004
! Fit after  self-cal, rms=0.157077Jy  sigma=1.961851
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.663 mas, bmaj=7.849 mas, bpa=18.88 degrees
! Estimated noise=1.07543 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.022625 Jy
! Component: 100  -  total flux cleaned = 0.032191 Jy
! Component: 150  -  total flux cleaned = 0.0344312 Jy
! Component: 200  -  total flux cleaned = 0.0359001 Jy
! Total flux subtracted in 200 components = 0.0359001 Jy
! Clean residual min=-0.020867 max=0.022923 Jy/beam
! Clean residual mean=-0.000072 rms=0.004803 Jy/beam
! Combined flux in latest and established models = 2.67474 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 110 components and 2.67474 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152752Jy  sigma=1.903297
! Fit after  self-cal, rms=0.152058Jy  sigma=1.889701
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.152058Jy  sigma=1.889701
! Fit after  self-cal, rms=0.119097Jy  sigma=1.548874
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.668 mas, bmaj=7.849 mas, bpa=18.85 degrees
! Estimated noise=1.07451 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209879 Jy
! Component: 100  -  total flux cleaned = 0.00231533 Jy
! Component: 150  -  total flux cleaned = 0.00213155 Jy
! Component: 200  -  total flux cleaned = 0.00227861 Jy
! Total flux subtracted in 200 components = 0.00227861 Jy
! Clean residual min=-0.008471 max=0.009573 Jy/beam
! Clean residual mean=-0.000005 rms=0.001595 Jy/beam
! Combined flux in latest and established models = 2.67701 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 129 components and 2.67701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.118193Jy  sigma=1.538052
! Fit after  self-cal, rms=0.118075Jy  sigma=1.536798
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5, 14.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00754525 Jy
! Component: 100  -  total flux cleaned = 0.00863943 Jy
! Component: 150  -  total flux cleaned = 0.00891742 Jy
! Component: 200  -  total flux cleaned = 0.00940251 Jy
! Total flux subtracted in 200 components = 0.00940251 Jy
! Clean residual min=-0.007452 max=0.005598 Jy/beam
! Clean residual mean=-0.000013 rms=0.001380 Jy/beam
! Combined flux in latest and established models = 2.68642 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 142 components and 2.68642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117366Jy  sigma=1.525105
! Fit after  self-cal, rms=0.117265Jy  sigma=1.524147
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.117265Jy  sigma=1.524147
! Fit after  self-cal, rms=0.117234Jy  sigma=1.520075
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.667 mas, bmaj=7.851 mas, bpa=18.89 degrees
! Estimated noise=1.07232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00251874 Jy
! Component: 100  -  total flux cleaned = -0.00241041 Jy
! Component: 150  -  total flux cleaned = -0.00195907 Jy
! Component: 200  -  total flux cleaned = -0.00176292 Jy
! Total flux subtracted in 200 components = -0.00176292 Jy
! Clean residual min=-0.006371 max=0.005404 Jy/beam
! Clean residual mean=-0.000010 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 2.68465 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 154 components and 2.68465 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116790Jy  sigma=1.516615
! Fit after  self-cal, rms=0.116762Jy  sigma=1.516339
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000575706 Jy
! Component: 100  -  total flux cleaned = 0.00110292 Jy
! Component: 150  -  total flux cleaned = 0.0015817 Jy
! Component: 200  -  total flux cleaned = 0.00173097 Jy
! Total flux subtracted in 200 components = 0.00173097 Jy
! Clean residual min=-0.006263 max=0.005236 Jy/beam
! Clean residual mean=-0.000011 rms=0.001196 Jy/beam
! Combined flux in latest and established models = 2.68638 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 162 components and 2.68638 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116647Jy  sigma=1.514343
! Fit after  self-cal, rms=0.116637Jy  sigma=1.514188
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116637Jy  sigma=1.514188
! Fit after  self-cal, rms=0.116698Jy  sigma=1.512279
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.166 mas, bmaj=9.772 mas, bpa=5.999 degrees
! Estimated noise=1.35786 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00434482 Jy
! Component: 100  -  total flux cleaned = -0.00428402 Jy
! Component: 150  -  total flux cleaned = -0.00407153 Jy
! Component: 200  -  total flux cleaned = -0.00402918 Jy
! Total flux subtracted in 200 components = -0.00402918 Jy
! Clean residual min=-0.004880 max=0.004497 Jy/beam
! Clean residual mean=-0.000016 rms=0.001230 Jy/beam
! Combined flux in latest and established models = 2.68236 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 179 components and 2.68236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116430Jy  sigma=1.513064
! Fit after  self-cal, rms=0.116399Jy  sigma=1.512665
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014821 Jy
! Component: 100  -  total flux cleaned = 0.000630056 Jy
! Component: 150  -  total flux cleaned = 0.000669297 Jy
! Component: 200  -  total flux cleaned = 0.000705212 Jy
! Total flux subtracted in 200 components = 0.000705212 Jy
! Clean residual min=-0.004688 max=0.004611 Jy/beam
! Clean residual mean=-0.000017 rms=0.001218 Jy/beam
! Combined flux in latest and established models = 2.68306 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 189 components and 2.68306 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116376Jy  sigma=1.512509
! Fit after  self-cal, rms=0.116365Jy  sigma=1.512365
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.667 mas, bmaj=7.852 mas, bpa=18.92 degrees
! Estimated noise=1.0703 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.667 x 7.852 at 18.92 degrees (North through East)
! Clean map  min=-0.0049247  max=2.0828 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116365Jy  sigma=1.512365
! Fit after  self-cal, rms=0.105912Jy  sigma=1.335650
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=7.845 mas, bpa=18.84 degrees
! Estimated noise=1.06125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.014867 Jy
! Component: 100  -  total flux cleaned = -0.0166104 Jy
! Component: 150  -  total flux cleaned = -0.0169042 Jy
! Component: 200  -  total flux cleaned = -0.0168922 Jy
! Total flux subtracted in 200 components = -0.0168922 Jy
! Clean residual min=-0.005526 max=0.007497 Jy/beam
! Clean residual mean=-0.000010 rms=0.001490 Jy/beam
! Combined flux in latest and established models = 2.66617 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 204 components and 2.66617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.103057Jy  sigma=1.311590
! Fit after  self-cal, rms=0.103059Jy  sigma=1.311390
! Inverting map 
! Added new window around map position (26, -18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00509331 Jy
! Component: 100  -  total flux cleaned = 0.00445368 Jy
! Component: 150  -  total flux cleaned = 0.00373763 Jy
! Component: 200  -  total flux cleaned = 0.00348201 Jy
! Total flux subtracted in 200 components = 0.00348201 Jy
! Clean residual min=-0.005302 max=0.005877 Jy/beam
! Clean residual mean=-0.000010 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 2.66965 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 218 components and 2.66965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.102341Jy  sigma=1.302045
! Fit after  self-cal, rms=0.102295Jy  sigma=1.301335
! Inverting map 
! Added new window around map position (7.5, -12.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178261 Jy
! Component: 100  -  total flux cleaned = 0.00325385 Jy
! Component: 150  -  total flux cleaned = 0.00413934 Jy
! Component: 200  -  total flux cleaned = 0.00506222 Jy
! Total flux subtracted in 200 components = 0.00506222 Jy
! Clean residual min=-0.005075 max=0.005118 Jy/beam
! Clean residual mean=-0.000009 rms=0.001188 Jy/beam
! Combined flux in latest and established models = 2.67471 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 235 components and 2.67471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101773Jy  sigma=1.294686
! Fit after  self-cal, rms=0.101747Jy  sigma=1.294351
! Inverting map 
! Added new window around map position (22.5, -82.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167419 Jy
! Component: 100  -  total flux cleaned = 0.00246704 Jy
! Component: 150  -  total flux cleaned = 0.00286442 Jy
! Component: 200  -  total flux cleaned = 0.00304948 Jy
! Total flux subtracted in 200 components = 0.00304948 Jy
! Clean residual min=-0.004741 max=0.004120 Jy/beam
! Clean residual mean=-0.000009 rms=0.001092 Jy/beam
! Combined flux in latest and established models = 2.67776 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 264 components and 2.67776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101352Jy  sigma=1.291059
! Fit after  self-cal, rms=0.101347Jy  sigma=1.290811
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101347Jy  sigma=1.290811
! Fit after  self-cal, rms=0.094489Jy  sigma=1.159920
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.104 mas, bmaj=7.299 mas, bpa=21.34 degrees
! Estimated noise=1.316 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.55341 Jy
! Component: 100  -  total flux cleaned = 1.97196 Jy
! Component: 150  -  total flux cleaned = 2.14867 Jy
! Component: 200  -  total flux cleaned = 2.25354 Jy
! Total flux subtracted in 200 components = 2.25354 Jy
! Clean residual min=-0.029937 max=0.057126 Jy/beam
! Clean residual mean=-0.000041 rms=0.008664 Jy/beam
! Combined flux in latest and established models = 2.25354 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 2.25354 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.665 mas, bmaj=7.843 mas, bpa=18.83 degrees
! Estimated noise=1.05434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.104825 Jy
! Component: 100  -  total flux cleaned = 0.175829 Jy
! Component: 150  -  total flux cleaned = 0.227843 Jy
! Component: 200  -  total flux cleaned = 0.266871 Jy
! Total flux subtracted in 200 components = 0.266871 Jy
! Clean residual min=-0.014545 max=0.022430 Jy/beam
! Clean residual mean=-0.000011 rms=0.004302 Jy/beam
! Combined flux in latest and established models = 2.52041 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 73 components and 2.52041 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.029538 Jy
! Component: 100  -  total flux cleaned = 0.0522435 Jy
! Component: 150  -  total flux cleaned = 0.069818 Jy
! Component: 200  -  total flux cleaned = 0.0834958 Jy
! Total flux subtracted in 200 components = 0.0834958 Jy
! Clean residual min=-0.008261 max=0.010004 Jy/beam
! Clean residual mean=-0.000006 rms=0.002166 Jy/beam
! Combined flux in latest and established models = 2.6039 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 100 components and 2.6039 Jy
! Inverting map 
! Added new window around map position (54.5, -128).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0112319 Jy
! Component: 100  -  total flux cleaned = 0.0204579 Jy
! Component: 150  -  total flux cleaned = 0.0275214 Jy
! Component: 200  -  total flux cleaned = 0.0334447 Jy
! Total flux subtracted in 200 components = 0.0334447 Jy
! Clean residual min=-0.006350 max=0.006897 Jy/beam
! Clean residual mean=-0.000010 rms=0.001641 Jy/beam
! Combined flux in latest and established models = 2.63735 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 132 components and 2.63735 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.157 mas, bmaj=9.766 mas, bpa=5.941 degrees
! Estimated noise=1.33976 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00978636 Jy
! Component: 100  -  total flux cleaned = 0.0164026 Jy
! Component: 150  -  total flux cleaned = 0.0198587 Jy
! Component: 200  -  total flux cleaned = 0.0219102 Jy
! Total flux subtracted in 200 components = 0.0219102 Jy
! Clean residual min=-0.005971 max=0.005880 Jy/beam
! Clean residual mean=-0.000021 rms=0.001520 Jy/beam
! Combined flux in latest and established models = 2.65926 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196083 Jy
! Component: 100  -  total flux cleaned = 0.00356514 Jy
! Component: 150  -  total flux cleaned = 0.00501185 Jy
! Component: 200  -  total flux cleaned = 0.00644326 Jy
! Total flux subtracted in 200 components = 0.00644326 Jy
! Clean residual min=-0.005372 max=0.005254 Jy/beam
! Clean residual mean=-0.000024 rms=0.001366 Jy/beam
! Combined flux in latest and established models = 2.6657 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 211 components and 2.6657 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.665 mas, bmaj=7.843 mas, bpa=18.83 degrees
! Estimated noise=1.05434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00183294 Jy
! Component: 100  -  total flux cleaned = 0.0025316 Jy
! Component: 150  -  total flux cleaned = 0.00343031 Jy
! Component: 200  -  total flux cleaned = 0.00354418 Jy
! Total flux subtracted in 200 components = 0.00354418 Jy
! Clean residual min=-0.004938 max=0.004757 Jy/beam
! Clean residual mean=-0.000014 rms=0.001240 Jy/beam
! Combined flux in latest and established models = 2.66925 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 239 components and 2.66925 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092110Jy  sigma=1.145287
! Fit after  self-cal, rms=0.092031Jy  sigma=1.143687
wmodel /J0237+2848_S_map.mod
! wmodel: Unable to open new model file: /J0237+2848_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0237+2848_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.665 x 7.843 at 18.83 degrees (North through East)
! Clean map  min=-0.0049754  max=2.0514 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0237+2848_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.05141 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00122267 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.178805 0.178805 0.35761 0.71522 1.43044 2.86088 5.72176 11.4435 22.887 45.7741 91.5482
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0036 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.051 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1677.81 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0237+2848_S_dfm.log closed on Thu May 19 23:00:17 2016