! Started logfile: /scr/pima/bg219i_uvs/J0234+0446_X_uvs.log on Wed Apr  6 23:29:15 2016
obs /scr/pima/bg219i_uvs/J0234+0446_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0234+0446_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.855556 visibilities/baseline/integration-bin.
! Found source: J0234+0446
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24024 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0234+0446_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.003669Jy  sigma=23.753049
! Fit after  self-cal, rms=0.920772Jy  sigma=21.871177
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7755 mas, bmaj=1.764 mas, bpa=-3.947 degrees
! Estimated noise=0.426896 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.055157 Jy
! Component: 100  -  total flux cleaned = 0.0739043 Jy
! Total flux subtracted in 100 components = 0.0739043 Jy
! Clean residual min=-0.009231 max=0.028081 Jy/beam
! Clean residual mean=-0.000020 rms=0.002811 Jy/beam
! Combined flux in latest and established models = 0.0739043 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0739043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.085454Jy  sigma=1.984536
! Fit after  self-cal, rms=0.084409Jy  sigma=1.955985
! Inverting map 
! Added new window around map position (2.4, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0215252 Jy
! Component: 100  -  total flux cleaned = 0.0322193 Jy
! Total flux subtracted in 100 components = 0.0322193 Jy
! Clean residual min=-0.007557 max=0.019647 Jy/beam
! Clean residual mean=-0.000013 rms=0.002127 Jy/beam
! Combined flux in latest and established models = 0.106124 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.106124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.077570Jy  sigma=1.786954
! Fit after  self-cal, rms=0.074265Jy  sigma=1.708410
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193379 Jy
! Component: 100  -  total flux cleaned = 0.0292138 Jy
! Total flux subtracted in 100 components = 0.0292138 Jy
! Clean residual min=-0.005724 max=0.008437 Jy/beam
! Clean residual mean=-0.000007 rms=0.001417 Jy/beam
! Combined flux in latest and established models = 0.135337 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.135337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.068592Jy  sigma=1.550284
! Fit after  self-cal, rms=0.065944Jy  sigma=1.480140
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132328 Jy
! Component: 100  -  total flux cleaned = 0.0204619 Jy
! Total flux subtracted in 100 components = 0.0204619 Jy
! Clean residual min=-0.004566 max=0.004884 Jy/beam
! Clean residual mean=-0.000002 rms=0.001029 Jy/beam
! Combined flux in latest and established models = 0.155799 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 45 components and 0.155799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063226Jy  sigma=1.396975
! Fit after  self-cal, rms=0.062818Jy  sigma=1.385361
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9595 mas, bmaj=2.004 mas, bpa=-2.266 degrees
! Estimated noise=0.271132 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695347 Jy
! Component: 100  -  total flux cleaned = 0.00818607 Jy
! Component: 150  -  total flux cleaned = 0.00818171 Jy
! Component: 200  -  total flux cleaned = 0.00824961 Jy
! Total flux subtracted in 200 components = 0.00824961 Jy
! Clean residual min=-0.003056 max=0.002916 Jy/beam
! Clean residual mean=-0.000000 rms=0.000619 Jy/beam
! Combined flux in latest and established models = 0.164049 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 59 components and 0.164049 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062168Jy  sigma=1.362230
! Fit after  self-cal, rms=0.062039Jy  sigma=1.358426
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9595 x 2.004 at -2.266 degrees (North through East)
! Clean map  min=-0.0024734  max=0.067176 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.00     KP        0.99     
!   LA        1.04     MK        1.05     NL        0.99     OV        0.97     
!   PT        0.96     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.04     KP        0.96     
!   LA        1.02     MK        0.93     NL        1.00     OV        1.02     
!   PT        0.96     SC        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.00     KP        0.97     
!   LA        0.99     MK        0.97     NL        1.03     OV        0.97     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        0.99     KP        0.99     
!   LA        1.01     MK        0.94     NL        1.02     OV        1.00     
!   PT        1.00     SC        1.02     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.06     KP        1.03     
!   LA        1.02     MK        0.98     NL        0.99     OV        0.95     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.02     KP        0.98     
!   LA        1.04     MK        0.98     NL        1.00     OV        1.00     
!   PT        1.02     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.06     HN        0.99     KP        1.04     
!   LA        0.98     MK        0.94     NL        0.96     OV        0.95     
!   PT        0.97     SC        0.97     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062039Jy  sigma=1.358426
! Fit after  self-cal, rms=0.061279Jy  sigma=1.355155
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9533 mas, bmaj=1.996 mas, bpa=-2.154 degrees
! Estimated noise=0.26706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00062482 Jy
! Component: 100  -  total flux cleaned = -0.000467193 Jy
! Component: 150  -  total flux cleaned = -0.000405523 Jy
! Component: 200  -  total flux cleaned = -0.000310853 Jy
! Total flux subtracted in 200 components = -0.000310853 Jy
! Clean residual min=-0.002114 max=0.002030 Jy/beam
! Clean residual mean=-0.000000 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.163738 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 70 components and 0.163738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061123Jy  sigma=1.349871
! Fit after  self-cal, rms=0.061102Jy  sigma=1.348812
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061102Jy  sigma=1.348812
! Fit after  self-cal, rms=0.061275Jy  sigma=1.345176
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9518 mas, bmaj=1.986 mas, bpa=-1.803 degrees
! Estimated noise=0.264814 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000430572 Jy
! Component: 100  -  total flux cleaned = -0.000378714 Jy
! Component: 150  -  total flux cleaned = -0.000339273 Jy
! Component: 200  -  total flux cleaned = -0.000311642 Jy
! Total flux subtracted in 200 components = -0.000311642 Jy
! Clean residual min=-0.001605 max=0.001704 Jy/beam
! Clean residual mean=0.000001 rms=0.000390 Jy/beam
! Combined flux in latest and established models = 0.163426 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 73 components and 0.163426 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061223Jy  sigma=1.343323
! Fit after  self-cal, rms=0.061232Jy  sigma=1.342908
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (16.2, -3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000783608 Jy
! Component: 100  -  total flux cleaned = 0.000750409 Jy
! Component: 150  -  total flux cleaned = 0.000632929 Jy
! Component: 200  -  total flux cleaned = 0.000561928 Jy
! Total flux subtracted in 200 components = 0.000561928 Jy
! Clean residual min=-0.001480 max=0.001590 Jy/beam
! Clean residual mean=0.000001 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.163988 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 82 components and 0.163988 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061192Jy  sigma=1.341682
! Fit after  self-cal, rms=0.061190Jy  sigma=1.341593
! Inverting map 
! Added new window around map position (-26.8, 49.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000585155 Jy
! Component: 100  -  total flux cleaned = 0.000873576 Jy
! Component: 150  -  total flux cleaned = 0.000983929 Jy
! Component: 200  -  total flux cleaned = 0.00103457 Jy
! Total flux subtracted in 200 components = 0.00103457 Jy
! Clean residual min=-0.001422 max=0.001410 Jy/beam
! Clean residual mean=0.000001 rms=0.000348 Jy/beam
! Combined flux in latest and established models = 0.165023 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 95 components and 0.165023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061146Jy  sigma=1.340504
! Fit after  self-cal, rms=0.061144Jy  sigma=1.340436
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061144Jy  sigma=1.340436
! Fit after  self-cal, rms=0.061118Jy  sigma=1.340317
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9512 mas, bmaj=1.983 mas, bpa=-1.663 degrees
! Estimated noise=0.264159 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.40859e-05 Jy
! Component: 100  -  total flux cleaned = 8.44706e-05 Jy
! Component: 150  -  total flux cleaned = 0.00015137 Jy
! Component: 200  -  total flux cleaned = 0.00015202 Jy
! Total flux subtracted in 200 components = 0.00015202 Jy
! Clean residual min=-0.001365 max=0.001351 Jy/beam
! Clean residual mean=0.000001 rms=0.000336 Jy/beam
! Combined flux in latest and established models = 0.165175 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 104 components and 0.165175 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061100Jy  sigma=1.339880
! Fit after  self-cal, rms=0.061101Jy  sigma=1.339859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.61326e-05 Jy
! Component: 100  -  total flux cleaned = -4.58195e-05 Jy
! Component: 150  -  total flux cleaned = -0.00010168 Jy
! Component: 200  -  total flux cleaned = -0.000153692 Jy
! Total flux subtracted in 200 components = -0.000153692 Jy
! Clean residual min=-0.001374 max=0.001356 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.165021 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 110 components and 0.165021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061090Jy  sigma=1.339603
! Fit after  self-cal, rms=0.061089Jy  sigma=1.339595
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061089Jy  sigma=1.339595
! Fit after  self-cal, rms=0.061077Jy  sigma=1.339561
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.302 mas, bpa=-7.703 degrees
! Estimated noise=0.329151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000209758 Jy
! Component: 100  -  total flux cleaned = -8.62371e-05 Jy
! Component: 150  -  total flux cleaned = -8.51255e-05 Jy
! Component: 200  -  total flux cleaned = -0.000109071 Jy
! Total flux subtracted in 200 components = -0.000109071 Jy
! Clean residual min=-0.001247 max=0.001394 Jy/beam
! Clean residual mean=0.000003 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.164912 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 124 components and 0.164912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061079Jy  sigma=1.339514
! Fit after  self-cal, rms=0.061081Jy  sigma=1.339497
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000110214 Jy
! Component: 100  -  total flux cleaned = -9.91728e-05 Jy
! Component: 150  -  total flux cleaned = -0.000119473 Jy
! Component: 200  -  total flux cleaned = -0.000157083 Jy
! Total flux subtracted in 200 components = -0.000157083 Jy
! Clean residual min=-0.001246 max=0.001391 Jy/beam
! Clean residual mean=0.000002 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.164755 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 134 components and 0.164755 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061083Jy  sigma=1.339490
! Fit after  self-cal, rms=0.061084Jy  sigma=1.339483
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9511 mas, bmaj=1.982 mas, bpa=-1.597 degrees
! Estimated noise=0.263927 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9511 x 1.982 at -1.597 degrees (North through East)
! Clean map  min=-0.0016754  max=0.064707 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7696 mas, bmaj=1.744 mas, bpa=-3.375 degrees
! Estimated noise=0.412583 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.063528 Jy
! Component: 100  -  total flux cleaned = 0.0967788 Jy
! Component: 150  -  total flux cleaned = 0.11669 Jy
! Component: 200  -  total flux cleaned = 0.129248 Jy
! Total flux subtracted in 200 components = 0.129248 Jy
! Clean residual min=-0.004065 max=0.006668 Jy/beam
! Clean residual mean=-0.000007 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.129248 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.129248 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9511 mas, bmaj=1.982 mas, bpa=-1.597 degrees
! Estimated noise=0.263927 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114129 Jy
! Component: 100  -  total flux cleaned = 0.018294 Jy
! Component: 150  -  total flux cleaned = 0.0228118 Jy
! Component: 200  -  total flux cleaned = 0.0259219 Jy
! Total flux subtracted in 200 components = 0.0259219 Jy
! Clean residual min=-0.002015 max=0.003389 Jy/beam
! Clean residual mean=-0.000002 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.15517 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 51 components and 0.15517 Jy
! Inverting map 
! Added new window around map position (1.2, -0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296925 Jy
! Component: 100  -  total flux cleaned = 0.00464134 Jy
! Component: 150  -  total flux cleaned = 0.00573473 Jy
! Component: 200  -  total flux cleaned = 0.00643994 Jy
! Total flux subtracted in 200 components = 0.00643994 Jy
! Clean residual min=-0.001694 max=0.001341 Jy/beam
! Clean residual mean=0.000000 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.16161 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.16161 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.123 mas, bmaj=3.302 mas, bpa=-7.703 degrees
! Estimated noise=0.329151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000946677 Jy
! Component: 100  -  total flux cleaned = 0.00135502 Jy
! Component: 150  -  total flux cleaned = 0.00165104 Jy
! Component: 200  -  total flux cleaned = 0.00180159 Jy
! Total flux subtracted in 200 components = 0.00180159 Jy
! Clean residual min=-0.001402 max=0.001498 Jy/beam
! Clean residual mean=0.000001 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.163411 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135136 Jy
! Component: 100  -  total flux cleaned = 0.000256885 Jy
! Component: 150  -  total flux cleaned = 0.000366586 Jy
! Component: 200  -  total flux cleaned = 0.000451852 Jy
! Total flux subtracted in 200 components = 0.000451852 Jy
! Clean residual min=-0.001374 max=0.001468 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.163863 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 102 components and 0.163863 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9511 mas, bmaj=1.982 mas, bpa=-1.597 degrees
! Estimated noise=0.263927 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168904 Jy
! Component: 100  -  total flux cleaned = 0.000142526 Jy
! Component: 150  -  total flux cleaned = 0.000142934 Jy
! Component: 200  -  total flux cleaned = 0.000166244 Jy
! Total flux subtracted in 200 components = 0.000166244 Jy
! Clean residual min=-0.001349 max=0.001357 Jy/beam
! Clean residual mean=0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.164029 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 117 components and 0.164029 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.061072Jy  sigma=1.339140
! Fit after  self-cal, rms=0.061056Jy  sigma=1.338863
wmodel /scr/pima/bg219i_uvs/J0234+0446_X_map.mod
! Writing 117 model components to file: /scr/pima/bg219i_uvs/J0234+0446_X_map.mod
wobs /scr/pima/bg219i_uvs/J0234+0446_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0234+0446_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J0234+0446_X_map.win
! wwins: Wrote 5 windows to /scr/pima/bg219i_uvs/J0234+0446_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.93474e-05 Jy
! Component: 100  -  total flux cleaned = -0.000191582 Jy
! Component: 150  -  total flux cleaned = -0.000257989 Jy
! Component: 200  -  total flux cleaned = -0.000385921 Jy
! Component: 250  -  total flux cleaned = -0.000427443 Jy
! Component: 300  -  total flux cleaned = -0.000527991 Jy
! Component: 350  -  total flux cleaned = -0.000547582 Jy
! Component: 400  -  total flux cleaned = -0.000604904 Jy
! Component: 450  -  total flux cleaned = -0.000661197 Jy
! Component: 500  -  total flux cleaned = -0.000643136 Jy
! Component: 550  -  total flux cleaned = -0.000679113 Jy
! Component: 600  -  total flux cleaned = -0.000643831 Jy
! Component: 650  -  total flux cleaned = -0.000626499 Jy
! Component: 700  -  total flux cleaned = -0.000592943 Jy
! Component: 750  -  total flux cleaned = -0.00062657 Jy
! Component: 800  -  total flux cleaned = -0.000577376 Jy
! Component: 850  -  total flux cleaned = -0.0005452 Jy
! Component: 900  -  total flux cleaned = -0.000481811 Jy
! Component: 950  -  total flux cleaned = -0.000450428 Jy
! Component: 1000  -  total flux cleaned = -0.000373057 Jy
! Component: 1050  -  total flux cleaned = -0.000312004 Jy
! Component: 1100  -  total flux cleaned = -0.000311825 Jy
! Component: 1150  -  total flux cleaned = -0.000237424 Jy
! Component: 1200  -  total flux cleaned = -0.000164114 Jy
! Component: 1250  -  total flux cleaned = -0.000135588 Jy
! Component: 1300  -  total flux cleaned = -0.00013566 Jy
! Component: 1350  -  total flux cleaned = -6.47501e-05 Jy
! Component: 1400  -  total flux cleaned = 4.8512e-06 Jy
! Component: 1450  -  total flux cleaned = 8.73125e-05 Jy
! Component: 1500  -  total flux cleaned = 8.73253e-05 Jy
! Component: 1550  -  total flux cleaned = 0.000168336 Jy
! Component: 1600  -  total flux cleaned = 0.000247997 Jy
! Component: 1650  -  total flux cleaned = 0.000300621 Jy
! Component: 1700  -  total flux cleaned = 0.000391749 Jy
! Component: 1750  -  total flux cleaned = 0.000417481 Jy
! Component: 1800  -  total flux cleaned = 0.000494054 Jy
! Component: 1850  -  total flux cleaned = 0.000506524 Jy
! Component: 1900  -  total flux cleaned = 0.000594068 Jy
! Component: 1950  -  total flux cleaned = 0.000618846 Jy
! Component: 2000  -  total flux cleaned = 0.000667686 Jy
! Component: 2050  -  total flux cleaned = 0.000728033 Jy
! Component: 2100  -  total flux cleaned = 0.000788029 Jy
! Component: 2150  -  total flux cleaned = 0.000799824 Jy
! Component: 2200  -  total flux cleaned = 0.000823449 Jy
! Component: 2250  -  total flux cleaned = 0.000881734 Jy
! Component: 2300  -  total flux cleaned = 0.000881731 Jy
! Component: 2350  -  total flux cleaned = 0.000938792 Jy
! Component: 2400  -  total flux cleaned = 0.000927456 Jy
! Component: 2450  -  total flux cleaned = 0.000916294 Jy
! Component: 2500  -  total flux cleaned = 0.00092752 Jy
! Component: 2550  -  total flux cleaned = 0.000938582 Jy
! Component: 2600  -  total flux cleaned = 0.000949529 Jy
! Component: 2650  -  total flux cleaned = 0.000938612 Jy
! Component: 2700  -  total flux cleaned = 0.000949481 Jy
! Component: 2750  -  total flux cleaned = 0.000938693 Jy
! Component: 2800  -  total flux cleaned = 0.000938563 Jy
! Component: 2850  -  total flux cleaned = 0.000938609 Jy
! Component: 2900  -  total flux cleaned = 0.00094895 Jy
! Component: 2950  -  total flux cleaned = 0.000938536 Jy
! Component: 3000  -  total flux cleaned = 0.000938592 Jy
! Component: 3050  -  total flux cleaned = 0.000928389 Jy
! Component: 3100  -  total flux cleaned = 0.000948766 Jy
! Component: 3150  -  total flux cleaned = 0.000958906 Jy
! Component: 3200  -  total flux cleaned = 0.000978995 Jy
! Component: 3250  -  total flux cleaned = 0.000988974 Jy
! Component: 3300  -  total flux cleaned = 0.000998801 Jy
! Component: 3350  -  total flux cleaned = 0.00103817 Jy
! Component: 3400  -  total flux cleaned = 0.00101847 Jy
! Component: 3450  -  total flux cleaned = 0.00103786 Jy
! Component: 3500  -  total flux cleaned = 0.00106678 Jy
! Component: 3550  -  total flux cleaned = 0.00105709 Jy
! Component: 3600  -  total flux cleaned = 0.00108565 Jy
! Component: 3650  -  total flux cleaned = 0.00110452 Jy
! Component: 3700  -  total flux cleaned = 0.00112332 Jy
! Component: 3750  -  total flux cleaned = 0.00115133 Jy
! Component: 3800  -  total flux cleaned = 0.00113273 Jy
! Component: 3850  -  total flux cleaned = 0.00116966 Jy
! Component: 3900  -  total flux cleaned = 0.00117872 Jy
! Component: 3950  -  total flux cleaned = 0.0012061 Jy
! Component: 4000  -  total flux cleaned = 0.00120601 Jy
! Component: 4050  -  total flux cleaned = 0.00125101 Jy
! Total flux subtracted in 4096 components = 0.00122411 Jy
! Clean residual min=-0.000616 max=0.000513 Jy/beam
! Clean residual mean=0.000001 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.165254 Jy
keep
! Adding 285 model components to the UV plane model.
! The established model now contains 402 components and 0.165253 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0234+0446_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9511 x 1.982 at -1.597 degrees (North through East)
! Clean map  min=-0.0012873  max=0.065237 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0234+0446_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.065237 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148624 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.683464 0.683464 1.36693 2.73386 5.46771 10.9354 21.8709 43.7417 87.4834
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.065 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  438.94 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0234+0446_X_uvs.log closed on Wed Apr  6 23:29:21 2016