! Started logfile: /scr/pima/bg219i_uvs/J0227-3026_S_uvs.log on Wed Apr  6 22:50:00 2016
obs /scr/pima/bg219i_uvs/J0227-3026_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0227-3026_S_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.889368 visibilities/baseline/integration-bin.
! Found source: J0227-3026
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 7428 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0227-3026_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 51 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003088Jy  sigma=17.477360
! Fit after  self-cal, rms=0.818924Jy  sigma=14.147429
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.165 mas, bmaj=13 mas, bpa=15.37 degrees
! Estimated noise=0.787247 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.139892 Jy
! Component: 100  -  total flux cleaned = 0.173259 Jy
! Total flux subtracted in 100 components = 0.173259 Jy
! Clean residual min=-0.006989 max=0.014220 Jy/beam
! Clean residual mean=-0.000083 rms=0.002263 Jy/beam
! Combined flux in latest and established models = 0.173259 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.173259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087815Jy  sigma=1.441495
! Fit after  self-cal, rms=0.087803Jy  sigma=1.441212
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0172416 Jy
! Component: 100  -  total flux cleaned = 0.0283551 Jy
! Total flux subtracted in 100 components = 0.0283551 Jy
! Clean residual min=-0.005377 max=0.006485 Jy/beam
! Clean residual mean=-0.000038 rms=0.001551 Jy/beam
! Combined flux in latest and established models = 0.201614 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 40 components and 0.201614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083180Jy  sigma=1.341474
! Fit after  self-cal, rms=0.083193Jy  sigma=1.341109
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.06 mas, bmaj=15.42 mas, bpa=14.32 degrees
! Estimated noise=0.487061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106298 Jy
! Component: 100  -  total flux cleaned = 0.0163989 Jy
! Component: 150  -  total flux cleaned = 0.0199323 Jy
! Component: 200  -  total flux cleaned = 0.0219884 Jy
! Total flux subtracted in 200 components = 0.0219884 Jy
! Clean residual min=-0.003952 max=0.004334 Jy/beam
! Clean residual mean=-0.000012 rms=0.001095 Jy/beam
! Combined flux in latest and established models = 0.223602 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 91 components and 0.223602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081945Jy  sigma=1.313363
! Fit after  self-cal, rms=0.081951Jy  sigma=1.313196
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.06 x 15.42 at 14.32 degrees (North through East)
! Clean map  min=-0.0037876  max=0.17658 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.09     KP        0.99     
!   LA        1.00     NL        0.98     OV        0.98     PT        0.99     
!   SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.17     KP        1.00     
!   LA        0.99     NL        0.95     OV        0.97     PT        0.99     
!   SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.13     KP        1.01     
!   LA        1.01     NL        0.98     OV        1.01     PT        1.02     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.081951Jy  sigma=1.313196
! Fit after  self-cal, rms=0.083406Jy  sigma=1.307447
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.079 mas, bmaj=15.6 mas, bpa=14.58 degrees
! Estimated noise=0.486384 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167342 Jy
! Component: 100  -  total flux cleaned = -0.00193808 Jy
! Component: 150  -  total flux cleaned = -0.0021713 Jy
! Component: 200  -  total flux cleaned = -0.00232846 Jy
! Total flux subtracted in 200 components = -0.00232846 Jy
! Clean residual min=-0.003902 max=0.003880 Jy/beam
! Clean residual mean=-0.000018 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.221274 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 98 components and 0.221274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083280Jy  sigma=1.306215
! Fit after  self-cal, rms=0.083310Jy  sigma=1.306131
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083310Jy  sigma=1.306131
! Fit after  self-cal, rms=0.082722Jy  sigma=1.306727
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.038 mas, bmaj=15.45 mas, bpa=14.66 degrees
! Estimated noise=0.482293 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00031033 Jy
! Component: 100  -  total flux cleaned = 0.000125644 Jy
! Component: 150  -  total flux cleaned = 1.41936e-05 Jy
! Component: 200  -  total flux cleaned = -0.000137454 Jy
! Total flux subtracted in 200 components = -0.000137454 Jy
! Clean residual min=-0.003558 max=0.003688 Jy/beam
! Clean residual mean=-0.000008 rms=0.000974 Jy/beam
! Combined flux in latest and established models = 0.221136 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 114 components and 0.221136 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082664Jy  sigma=1.304996
! Fit after  self-cal, rms=0.082668Jy  sigma=1.304897
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00010016 Jy
! Component: 100  -  total flux cleaned = -0.000187964 Jy
! Component: 150  -  total flux cleaned = -0.000310587 Jy
! Component: 200  -  total flux cleaned = -0.000387897 Jy
! Total flux subtracted in 200 components = -0.000387897 Jy
! Clean residual min=-0.003594 max=0.003669 Jy/beam
! Clean residual mean=-0.000009 rms=0.000953 Jy/beam
! Combined flux in latest and established models = 0.220748 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 121 components and 0.220748 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082633Jy  sigma=1.304108
! Fit after  self-cal, rms=0.082632Jy  sigma=1.304084
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082632Jy  sigma=1.304084
! Fit after  self-cal, rms=0.082770Jy  sigma=1.303841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.028 mas, bmaj=15.44 mas, bpa=14.71 degrees
! Estimated noise=0.481736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.66359e-05 Jy
! Component: 100  -  total flux cleaned = -2.44407e-05 Jy
! Component: 150  -  total flux cleaned = -0.000136162 Jy
! Component: 200  -  total flux cleaned = -0.000206635 Jy
! Total flux subtracted in 200 components = -0.000206635 Jy
! Clean residual min=-0.003606 max=0.003608 Jy/beam
! Clean residual mean=-0.000009 rms=0.000935 Jy/beam
! Combined flux in latest and established models = 0.220542 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 123 components and 0.220541 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082738Jy  sigma=1.303190
! Fit after  self-cal, rms=0.082739Jy  sigma=1.303172
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.55498e-05 Jy
! Component: 100  -  total flux cleaned = -0.000139214 Jy
! Component: 150  -  total flux cleaned = -0.000168681 Jy
! Component: 200  -  total flux cleaned = -0.00022571 Jy
! Total flux subtracted in 200 components = -0.00022571 Jy
! Clean residual min=-0.003649 max=0.003614 Jy/beam
! Clean residual mean=-0.000009 rms=0.000924 Jy/beam
! Combined flux in latest and established models = 0.220316 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 128 components and 0.220316 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082717Jy  sigma=1.302788
! Fit after  self-cal, rms=0.082717Jy  sigma=1.302777
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082717Jy  sigma=1.302777
! Fit after  self-cal, rms=0.082618Jy  sigma=1.302674
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.312 mas, bmaj=23.6 mas, bpa=5.939 degrees
! Estimated noise=0.54474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000602797 Jy
! Component: 100  -  total flux cleaned = -0.000772471 Jy
! Component: 150  -  total flux cleaned = -0.000832371 Jy
! Component: 200  -  total flux cleaned = -0.000881796 Jy
! Total flux subtracted in 200 components = -0.000881796 Jy
! Clean residual min=-0.003650 max=0.002730 Jy/beam
! Clean residual mean=-0.000021 rms=0.000946 Jy/beam
! Combined flux in latest and established models = 0.219434 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 135 components and 0.219434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082626Jy  sigma=1.302396
! Fit after  self-cal, rms=0.082622Jy  sigma=1.302358
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.7058e-05 Jy
! Component: 100  -  total flux cleaned = -5.06653e-05 Jy
! Component: 150  -  total flux cleaned = -9.31511e-05 Jy
! Component: 200  -  total flux cleaned = -0.000114413 Jy
! Total flux subtracted in 200 components = -0.000114413 Jy
! Clean residual min=-0.003596 max=0.002733 Jy/beam
! Clean residual mean=-0.000022 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.21932 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 137 components and 0.21932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082616Jy  sigma=1.302379
! Fit after  self-cal, rms=0.082615Jy  sigma=1.302365
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=15.45 mas, bpa=14.74 degrees
! Estimated noise=0.481142 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.02 x 15.45 at 14.74 degrees (North through East)
! Clean map  min=-0.003696  max=0.17748 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.135 mas, bmaj=13.09 mas, bpa=15.75 degrees
! Estimated noise=0.779027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.138308 Jy
! Component: 100  -  total flux cleaned = 0.172632 Jy
! Component: 150  -  total flux cleaned = 0.188458 Jy
! Component: 200  -  total flux cleaned = 0.198718 Jy
! Total flux subtracted in 200 components = 0.198718 Jy
! Clean residual min=-0.004997 max=0.006025 Jy/beam
! Clean residual mean=-0.000036 rms=0.001468 Jy/beam
! Combined flux in latest and established models = 0.198718 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.198718 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=15.45 mas, bpa=14.74 degrees
! Estimated noise=0.481142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102808 Jy
! Component: 100  -  total flux cleaned = 0.0156773 Jy
! Component: 150  -  total flux cleaned = 0.0188203 Jy
! Component: 200  -  total flux cleaned = 0.0201493 Jy
! Total flux subtracted in 200 components = 0.0201493 Jy
! Clean residual min=-0.003559 max=0.003820 Jy/beam
! Clean residual mean=-0.000013 rms=0.000975 Jy/beam
! Combined flux in latest and established models = 0.218867 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 89 components and 0.218867 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.312 mas, bmaj=23.6 mas, bpa=5.939 degrees
! Estimated noise=0.54474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117158 Jy
! Component: 100  -  total flux cleaned = 0.00116823 Jy
! Component: 150  -  total flux cleaned = 0.00112408 Jy
! Component: 200  -  total flux cleaned = 0.00108517 Jy
! Total flux subtracted in 200 components = 0.00108517 Jy
! Clean residual min=-0.003536 max=0.002842 Jy/beam
! Clean residual mean=-0.000018 rms=0.000996 Jy/beam
! Combined flux in latest and established models = 0.219952 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.96582e-05 Jy
! Component: 100  -  total flux cleaned = -7.84335e-05 Jy
! Component: 150  -  total flux cleaned = -0.000152641 Jy
! Component: 200  -  total flux cleaned = -0.00018629 Jy
! Total flux subtracted in 200 components = -0.00018629 Jy
! Clean residual min=-0.003544 max=0.002796 Jy/beam
! Clean residual mean=-0.000019 rms=0.000978 Jy/beam
! Combined flux in latest and established models = 0.219766 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 100 components and 0.219766 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.02 mas, bmaj=15.45 mas, bpa=14.74 degrees
! Estimated noise=0.481142 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00019265 Jy
! Component: 100  -  total flux cleaned = -0.000297095 Jy
! Component: 150  -  total flux cleaned = -0.000296548 Jy
! Component: 200  -  total flux cleaned = -0.000254321 Jy
! Total flux subtracted in 200 components = -0.000254321 Jy
! Clean residual min=-0.003576 max=0.003495 Jy/beam
! Clean residual mean=-0.000011 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.219512 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 103 components and 0.219512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.082651Jy  sigma=1.302901
! Fit after  self-cal, rms=0.082646Jy  sigma=1.302824
wmodel /scr/pima/bg219i_uvs/J0227-3026_S_map.mod
! Writing 103 model components to file: /scr/pima/bg219i_uvs/J0227-3026_S_map.mod
wobs /scr/pima/bg219i_uvs/J0227-3026_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0227-3026_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J0227-3026_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219i_uvs/J0227-3026_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000194446 Jy
! Component: 100  -  total flux cleaned = 0.000258359 Jy
! Component: 150  -  total flux cleaned = 0.000488046 Jy
! Component: 200  -  total flux cleaned = 0.000544059 Jy
! Component: 250  -  total flux cleaned = 0.000699102 Jy
! Component: 300  -  total flux cleaned = 0.000797248 Jy
! Component: 350  -  total flux cleaned = 0.00098837 Jy
! Component: 400  -  total flux cleaned = 0.00140292 Jy
! Component: 450  -  total flux cleaned = 0.00180238 Jy
! Component: 500  -  total flux cleaned = 0.00214871 Jy
! Component: 550  -  total flux cleaned = 0.00269702 Jy
! Component: 600  -  total flux cleaned = 0.00319128 Jy
! Component: 650  -  total flux cleaned = 0.00371485 Jy
! Component: 700  -  total flux cleaned = 0.00414886 Jy
! Component: 750  -  total flux cleaned = 0.00461259 Jy
! Component: 800  -  total flux cleaned = 0.00495403 Jy
! Component: 850  -  total flux cleaned = 0.00521507 Jy
! Component: 900  -  total flux cleaned = 0.00550825 Jy
! Component: 950  -  total flux cleaned = 0.00572408 Jy
! Component: 1000  -  total flux cleaned = 0.00597237 Jy
! Component: 1050  -  total flux cleaned = 0.00604121 Jy
! Component: 1100  -  total flux cleaned = 0.00617875 Jy
! Component: 1150  -  total flux cleaned = 0.00628048 Jy
! Component: 1200  -  total flux cleaned = 0.00638116 Jy
! Component: 1250  -  total flux cleaned = 0.0066781 Jy
! Component: 1300  -  total flux cleaned = 0.00680832 Jy
! Component: 1350  -  total flux cleaned = 0.00700121 Jy
! Component: 1400  -  total flux cleaned = 0.00731899 Jy
! Component: 1450  -  total flux cleaned = 0.00753838 Jy
! Component: 1500  -  total flux cleaned = 0.0077244 Jy
! Component: 1550  -  total flux cleaned = 0.00809177 Jy
! Component: 1600  -  total flux cleaned = 0.00830321 Jy
! Component: 1650  -  total flux cleaned = 0.00854246 Jy
! Component: 1700  -  total flux cleaned = 0.00874947 Jy
! Component: 1750  -  total flux cleaned = 0.00895431 Jy
! Component: 1800  -  total flux cleaned = 0.00912848 Jy
! Component: 1850  -  total flux cleaned = 0.00938726 Jy
! Component: 1900  -  total flux cleaned = 0.00964294 Jy
! Component: 1950  -  total flux cleaned = 0.0098112 Jy
! Component: 2000  -  total flux cleaned = 0.0100334 Jy
! Component: 2050  -  total flux cleaned = 0.0103082 Jy
! Component: 2100  -  total flux cleaned = 0.0105258 Jy
! Component: 2150  -  total flux cleaned = 0.0107144 Jy
! Component: 2200  -  total flux cleaned = 0.0109015 Jy
! Component: 2250  -  total flux cleaned = 0.0110862 Jy
! Component: 2300  -  total flux cleaned = 0.0112174 Jy
! Component: 2350  -  total flux cleaned = 0.0114247 Jy
! Component: 2400  -  total flux cleaned = 0.0116305 Jy
! Component: 2450  -  total flux cleaned = 0.0116815 Jy
! Component: 2500  -  total flux cleaned = 0.0119342 Jy
! Component: 2550  -  total flux cleaned = 0.0120595 Jy
! Component: 2600  -  total flux cleaned = 0.0122086 Jy
! Component: 2650  -  total flux cleaned = 0.0123559 Jy
! Component: 2700  -  total flux cleaned = 0.0124778 Jy
! Component: 2750  -  total flux cleaned = 0.0126712 Jy
! Component: 2800  -  total flux cleaned = 0.012815 Jy
! Component: 2850  -  total flux cleaned = 0.0128864 Jy
! Component: 2900  -  total flux cleaned = 0.0130515 Jy
! Component: 2950  -  total flux cleaned = 0.0132151 Jy
! Component: 3000  -  total flux cleaned = 0.0134471 Jy
! Component: 3050  -  total flux cleaned = 0.013585 Jy
! Component: 3100  -  total flux cleaned = 0.0137441 Jy
! Component: 3150  -  total flux cleaned = 0.0138345 Jy
! Component: 3200  -  total flux cleaned = 0.0139243 Jy
! Component: 3250  -  total flux cleaned = 0.0139915 Jy
! Component: 3300  -  total flux cleaned = 0.0141906 Jy
! Component: 3350  -  total flux cleaned = 0.0142785 Jy
! Component: 3400  -  total flux cleaned = 0.0144093 Jy
! Component: 3450  -  total flux cleaned = 0.0145606 Jy
! Component: 3500  -  total flux cleaned = 0.0146463 Jy
! Component: 3550  -  total flux cleaned = 0.0147317 Jy
! Component: 3600  -  total flux cleaned = 0.014859 Jy
! Component: 3650  -  total flux cleaned = 0.014964 Jy
! Component: 3700  -  total flux cleaned = 0.0150058 Jy
! Component: 3750  -  total flux cleaned = 0.015068 Jy
! Component: 3800  -  total flux cleaned = 0.0151296 Jy
! Component: 3850  -  total flux cleaned = 0.0151703 Jy
! Component: 3900  -  total flux cleaned = 0.0151705 Jy
! Component: 3950  -  total flux cleaned = 0.0152716 Jy
! Component: 4000  -  total flux cleaned = 0.0152716 Jy
! Component: 4050  -  total flux cleaned = 0.0153512 Jy
! Total flux subtracted in 4096 components = 0.0154306 Jy
! Clean residual min=-0.001141 max=0.001109 Jy/beam
! Clean residual mean=-0.000005 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.234942 Jy
keep
! Adding 324 model components to the UV plane model.
! The established model now contains 427 components and 0.234942 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0227-3026_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.02 x 15.45 at 14.74 degrees (North through East)
! Clean map  min=-0.0023342  max=0.17636 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0227-3026_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.176363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000414887 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.705739 0.705739 1.41148 2.82295 5.64591 11.2918 22.5836 45.1673 90.3345
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.176 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  425.086 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0227-3026_S_uvs.log closed on Wed Apr  6 22:50:05 2016