! Started logfile: /scr/pima/bg219i_uvs/J0215+0524_S_dfm.log on Thu May 19 22:59:02 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /scr/pima/bg219i_uvs/J0215+0524_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0215+0524_S_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0215+0524
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0215+0524_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013687Jy  sigma=23.007643
! Fit after  self-cal, rms=0.857393Jy  sigma=19.421408
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.912 mas, bmaj=6.66 mas, bpa=-3.571 degrees
! Estimated noise=0.548515 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.109822 Jy
! Component: 100  -  total flux cleaned = 0.134512 Jy
! Total flux subtracted in 100 components = 0.134512 Jy
! Clean residual min=-0.004048 max=0.008715 Jy/beam
! Clean residual mean=-0.000004 rms=0.001113 Jy/beam
! Combined flux in latest and established models = 0.134512 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.134512 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063206Jy  sigma=1.383064
! Fit after  self-cal, rms=0.063191Jy  sigma=1.382965
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00896067 Jy
! Component: 100  -  total flux cleaned = 0.0137684 Jy
! Total flux subtracted in 100 components = 0.0137684 Jy
! Clean residual min=-0.003433 max=0.003384 Jy/beam
! Clean residual mean=-0.000000 rms=0.000866 Jy/beam
! Combined flux in latest and established models = 0.14828 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 29 components and 0.14828 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061594Jy  sigma=1.342545
! Fit after  self-cal, rms=0.061573Jy  sigma=1.342375
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.465 mas, bmaj=7.509 mas, bpa=-5.13 degrees
! Estimated noise=0.418308 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00461247 Jy
! Component: 100  -  total flux cleaned = 0.00727888 Jy
! Component: 150  -  total flux cleaned = 0.00895952 Jy
! Component: 200  -  total flux cleaned = 0.0100563 Jy
! Total flux subtracted in 200 components = 0.0100563 Jy
! Clean residual min=-0.002404 max=0.002721 Jy/beam
! Clean residual mean=0.000004 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.158336 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 70 components and 0.158336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061253Jy  sigma=1.333314
! Fit after  self-cal, rms=0.061249Jy  sigma=1.333207
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.465 x 7.509 at -5.13 degrees (North through East)
! Clean map  min=-0.002286  max=0.14308 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.04     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        1.02     KP        1.00     
!   LA        1.01     MK        1.01     NL        0.99     OV        1.00     
!   PT        0.94     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.05     KP        1.00     
!   LA        1.01     MK        0.98     NL        0.98     OV        0.98     
!   PT        0.98     SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.04     KP        0.99     
!   LA        1.03     MK        1.01     NL        1.02     OV        0.96     
!   PT        0.99     SC        1.04     
! 
! 
! Fit before self-cal, rms=0.061249Jy  sigma=1.333207
! Fit after  self-cal, rms=0.061515Jy  sigma=1.328999
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.482 mas, bmaj=7.547 mas, bpa=-5.22 degrees
! Estimated noise=0.418142 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000434733 Jy
! Component: 100  -  total flux cleaned = -0.000530863 Jy
! Component: 150  -  total flux cleaned = -0.000531053 Jy
! Component: 200  -  total flux cleaned = -0.000531415 Jy
! Total flux subtracted in 200 components = -0.000531415 Jy
! Clean residual min=-0.002519 max=0.002379 Jy/beam
! Clean residual mean=0.000006 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.157805 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.157805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061505Jy  sigma=1.328869
! Fit after  self-cal, rms=0.061522Jy  sigma=1.328802
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061522Jy  sigma=1.328802
! Fit after  self-cal, rms=0.061578Jy  sigma=1.324114
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.48 mas, bmaj=7.552 mas, bpa=-5.237 degrees
! Estimated noise=0.417831 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176933 Jy
! Component: 100  -  total flux cleaned = 5.67955e-05 Jy
! Component: 150  -  total flux cleaned = 3.64507e-05 Jy
! Component: 200  -  total flux cleaned = 2.86962e-05 Jy
! Total flux subtracted in 200 components = 2.86962e-05 Jy
! Clean residual min=-0.002453 max=0.002368 Jy/beam
! Clean residual mean=-0.000001 rms=0.000573 Jy/beam
! Combined flux in latest and established models = 0.157834 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 84 components and 0.157834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061568Jy  sigma=1.323979
! Fit after  self-cal, rms=0.061578Jy  sigma=1.323924
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.89334e-05 Jy
! Component: 100  -  total flux cleaned = 2.66871e-05 Jy
! Component: 150  -  total flux cleaned = 1.94328e-05 Jy
! Component: 200  -  total flux cleaned = 1.21852e-05 Jy
! Total flux subtracted in 200 components = 1.21852e-05 Jy
! Clean residual min=-0.002441 max=0.002368 Jy/beam
! Clean residual mean=-0.000001 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.157846 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 86 components and 0.157846 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061575Jy  sigma=1.323887
! Fit after  self-cal, rms=0.061575Jy  sigma=1.323881
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061575Jy  sigma=1.323881
! Fit after  self-cal, rms=0.061659Jy  sigma=1.323825
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=7.563 mas, bpa=-5.363 degrees
! Estimated noise=0.418146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000106631 Jy
! Component: 100  -  total flux cleaned = 8.12994e-05 Jy
! Component: 150  -  total flux cleaned = 6.3311e-05 Jy
! Component: 200  -  total flux cleaned = 4.93311e-05 Jy
! Total flux subtracted in 200 components = 4.93311e-05 Jy
! Clean residual min=-0.002452 max=0.002345 Jy/beam
! Clean residual mean=-0.000002 rms=0.000571 Jy/beam
! Combined flux in latest and established models = 0.157895 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 89 components and 0.157895 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061653Jy  sigma=1.323768
! Fit after  self-cal, rms=0.061653Jy  sigma=1.323759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.25703e-06 Jy
! Component: 100  -  total flux cleaned = -1.35495e-05 Jy
! Component: 150  -  total flux cleaned = -1.91756e-05 Jy
! Component: 200  -  total flux cleaned = -2.44749e-05 Jy
! Total flux subtracted in 200 components = -2.44749e-05 Jy
! Clean residual min=-0.002445 max=0.002348 Jy/beam
! Clean residual mean=-0.000002 rms=0.000570 Jy/beam
! Combined flux in latest and established models = 0.157871 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 92 components and 0.157871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061652Jy  sigma=1.323744
! Fit after  self-cal, rms=0.061652Jy  sigma=1.323737
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061652Jy  sigma=1.323737
! Fit after  self-cal, rms=0.061703Jy  sigma=1.323699
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.536 mas, bmaj=11.23 mas, bpa=-2.808 degrees
! Estimated noise=0.523182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000681962 Jy
! Component: 100  -  total flux cleaned = 0.000625963 Jy
! Component: 150  -  total flux cleaned = 0.000564761 Jy
! Component: 200  -  total flux cleaned = 0.000514894 Jy
! Total flux subtracted in 200 components = 0.000514894 Jy
! Clean residual min=-0.002569 max=0.002235 Jy/beam
! Clean residual mean=-0.000003 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.158386 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 94 components and 0.158386 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061705Jy  sigma=1.323934
! Fit after  self-cal, rms=0.061703Jy  sigma=1.323804
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.9652e-06 Jy
! Component: 100  -  total flux cleaned = -2.10023e-05 Jy
! Component: 150  -  total flux cleaned = -5.28332e-05 Jy
! Component: 200  -  total flux cleaned = -8.05484e-05 Jy
! Total flux subtracted in 200 components = -8.05484e-05 Jy
! Clean residual min=-0.002576 max=0.002182 Jy/beam
! Clean residual mean=-0.000003 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.158305 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 94 components and 0.158305 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061707Jy  sigma=1.323995
! Fit after  self-cal, rms=0.061706Jy  sigma=1.323924
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=7.571 mas, bpa=-5.469 degrees
! Estimated noise=0.418303 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.477 x 7.571 at -5.469 degrees (North through East)
! Clean map  min=-0.0022853  max=0.1428 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.922 mas, bmaj=6.699 mas, bpa=-3.83 degrees
! Estimated noise=0.550863 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110217 Jy
! Component: 100  -  total flux cleaned = 0.135238 Jy
! Component: 150  -  total flux cleaned = 0.144348 Jy
! Component: 200  -  total flux cleaned = 0.148814 Jy
! Total flux subtracted in 200 components = 0.148814 Jy
! Clean residual min=-0.003201 max=0.002899 Jy/beam
! Clean residual mean=-0.000003 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.148814 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 36 model components to the UV plane model.
! The established model now contains 36 components and 0.148814 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=7.571 mas, bpa=-5.469 degrees
! Estimated noise=0.418303 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406637 Jy
! Component: 100  -  total flux cleaned = 0.00631581 Jy
! Component: 150  -  total flux cleaned = 0.00765716 Jy
! Component: 200  -  total flux cleaned = 0.00847133 Jy
! Total flux subtracted in 200 components = 0.00847133 Jy
! Clean residual min=-0.002394 max=0.002383 Jy/beam
! Clean residual mean=-0.000002 rms=0.000575 Jy/beam
! Combined flux in latest and established models = 0.157285 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 60 components and 0.157285 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.536 mas, bmaj=11.23 mas, bpa=-2.808 degrees
! Estimated noise=0.523182 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114211 Jy
! Component: 100  -  total flux cleaned = 0.00112566 Jy
! Component: 150  -  total flux cleaned = 0.00111436 Jy
! Component: 200  -  total flux cleaned = 0.00109471 Jy
! Total flux subtracted in 200 components = 0.00109471 Jy
! Clean residual min=-0.002581 max=0.002202 Jy/beam
! Clean residual mean=-0.000003 rms=0.000672 Jy/beam
! Combined flux in latest and established models = 0.15838 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.71368e-07 Jy
! Component: 100  -  total flux cleaned = -7.54948e-06 Jy
! Component: 150  -  total flux cleaned = -1.5175e-05 Jy
! Component: 200  -  total flux cleaned = -2.27602e-05 Jy
! Total flux subtracted in 200 components = -2.27602e-05 Jy
! Clean residual min=-0.002580 max=0.002176 Jy/beam
! Clean residual mean=-0.000003 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.158357 Jy
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.158357 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.477 mas, bmaj=7.571 mas, bpa=-5.469 degrees
! Estimated noise=0.418303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000534993 Jy
! Component: 100  -  total flux cleaned = -0.000370181 Jy
! Component: 150  -  total flux cleaned = -0.000248473 Jy
! Component: 200  -  total flux cleaned = -0.000192488 Jy
! Total flux subtracted in 200 components = -0.000192488 Jy
! Clean residual min=-0.002377 max=0.002391 Jy/beam
! Clean residual mean=-0.000002 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.158164 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 75 components and 0.158164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061717Jy  sigma=1.324147
! Fit after  self-cal, rms=0.061715Jy  sigma=1.324115
wmodel /J0215+0524_S_map.mod
! wmodel: Unable to open new model file: /J0215+0524_S_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0215+0524_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.477 x 7.571 at -5.469 degrees (North through East)
! Clean map  min=-0.0023062  max=0.14301 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0215+0524_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.143006 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000572 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.19995 1.19995 2.39991 4.79981 9.59962 19.1992 38.3985 76.797
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0017 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.143 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  250.009 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0215+0524_S_dfm.log closed on Thu May 19 22:59:04 2016