! Started logfile: /scr/pima/bg219i_uvs/J0204-3328_X_dfm.log on Thu May 19 22:58:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0204-3328_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0204-3328_X_uva.fits
! AN table 1: 58 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.763889 visibilities/baseline/integration-bin.
! Found source: J0204-3328
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 19140 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0204-3328_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 47 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.012207Jy  sigma=19.087107
! Fit after  self-cal, rms=0.899616Jy  sigma=16.875780
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7525 mas, bmaj=3.695 mas, bpa=20.07 degrees
! Estimated noise=0.593494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0768717 Jy
! Component: 100  -  total flux cleaned = 0.098134 Jy
! Total flux subtracted in 100 components = 0.098134 Jy
! Clean residual min=-0.006472 max=0.011260 Jy/beam
! Clean residual mean=-0.000013 rms=0.001772 Jy/beam
! Combined flux in latest and established models = 0.098134 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.098134 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084595Jy  sigma=1.471915
! Fit after  self-cal, rms=0.084171Jy  sigma=1.464085
! Inverting map 
! Added new window around map position (1.4, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0132819 Jy
! Component: 100  -  total flux cleaned = 0.0218386 Jy
! Total flux subtracted in 100 components = 0.0218386 Jy
! Clean residual min=-0.004917 max=0.008741 Jy/beam
! Clean residual mean=-0.000005 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.119973 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.119973 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081146Jy  sigma=1.396550
! Fit after  self-cal, rms=0.081057Jy  sigma=1.394286
! Inverting map 
! Added new window around map position (3.4, 4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00878132 Jy
! Component: 100  -  total flux cleaned = 0.0139603 Jy
! Total flux subtracted in 100 components = 0.0139603 Jy
! Clean residual min=-0.004197 max=0.004564 Jy/beam
! Clean residual mean=-0.000004 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.133933 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.133933 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079892Jy  sigma=1.369129
! Fit after  self-cal, rms=0.079800Jy  sigma=1.366920
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=4.309 mas, bpa=17.37 degrees
! Estimated noise=0.284821 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00635369 Jy
! Component: 100  -  total flux cleaned = 0.0101426 Jy
! Component: 150  -  total flux cleaned = 0.0128271 Jy
! Component: 200  -  total flux cleaned = 0.014779 Jy
! Total flux subtracted in 200 components = 0.014779 Jy
! Clean residual min=-0.003003 max=0.002886 Jy/beam
! Clean residual mean=-0.000009 rms=0.000856 Jy/beam
! Combined flux in latest and established models = 0.148712 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 74 components and 0.148712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079270Jy  sigma=1.354693
! Fit after  self-cal, rms=0.079226Jy  sigma=1.353409
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 4.309 at 17.37 degrees (North through East)
! Clean map  min=-0.0029294  max=0.10106 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    OV        1.00*    PT        1.00*    
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.09     KP        0.97     
!   LA        1.00     NL        1.07     OV        0.97     PT        0.98     
!   SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        0.96     KP        0.97     
!   LA        0.98     NL        1.03     OV        0.99     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.96     HN        1.18     KP        0.96     
!   LA        0.96     NL        1.02     OV        0.96     PT        1.03     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.96     HN        1.01     KP        1.01     
!   LA        0.95     NL        1.07     OV        0.97     PT        1.04     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.95     HN        1.04     KP        1.01     
!   LA        0.98     NL        1.01     OV        0.97     PT        1.04     
!   SC        1.02     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.02     KP        0.98     
!   LA        0.99     NL        1.11     OV        0.96     PT        1.05     
!   SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.10     KP        1.01     
!   LA        0.98     NL        1.04     OV        0.97     PT        1.04     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.96     HN        1.02     KP        0.98     
!   LA        1.03     NL        1.03     OV        0.97     PT        1.02     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.97     HN        0.99     KP        0.99     
!   LA        0.96     NL        0.98     OV        0.98     PT        1.01     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     HN        1.02     KP        0.97     
!   LA        0.94     NL        1.00     OV        0.98     PT        1.07     
!   SC        0.95     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.94     HN        0.94     KP        1.00     
!   LA        1.01     NL        1.01     OV        0.98     PT        1.01     
!   SC        1.01     
! 
! 
! Fit before self-cal, rms=0.079226Jy  sigma=1.353409
! Fit after  self-cal, rms=0.078994Jy  sigma=1.350327
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=4.34 mas, bpa=17.46 degrees
! Estimated noise=0.281786 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00172227 Jy
! Component: 100  -  total flux cleaned = 0.00209552 Jy
! Component: 150  -  total flux cleaned = 0.00233434 Jy
! Component: 200  -  total flux cleaned = 0.00244538 Jy
! Total flux subtracted in 200 components = 0.00244538 Jy
! Clean residual min=-0.002732 max=0.002718 Jy/beam
! Clean residual mean=-0.000007 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.151157 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 102 components and 0.151157 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078937Jy  sigma=1.349124
! Fit after  self-cal, rms=0.078959Jy  sigma=1.348817
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078959Jy  sigma=1.348817
! Fit after  self-cal, rms=0.079386Jy  sigma=1.345647
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=4.342 mas, bpa=17.45 degrees
! Estimated noise=0.282154 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004628 Jy
! Component: 100  -  total flux cleaned = 0.000489309 Jy
! Component: 150  -  total flux cleaned = 0.00048996 Jy
! Component: 200  -  total flux cleaned = 0.000470025 Jy
! Total flux subtracted in 200 components = 0.000470025 Jy
! Clean residual min=-0.002138 max=0.002495 Jy/beam
! Clean residual mean=-0.000005 rms=0.000569 Jy/beam
! Combined flux in latest and established models = 0.151627 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 117 components and 0.151627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079370Jy  sigma=1.345339
! Fit after  self-cal, rms=0.079391Jy  sigma=1.345220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.2, -40).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00212546 Jy
! Component: 100  -  total flux cleaned = 0.00332639 Jy
! Component: 150  -  total flux cleaned = 0.00415209 Jy
! Component: 200  -  total flux cleaned = 0.00462378 Jy
! Total flux subtracted in 200 components = 0.00462378 Jy
! Clean residual min=-0.002033 max=0.002078 Jy/beam
! Clean residual mean=-0.000002 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.156251 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 143 components and 0.156251 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079324Jy  sigma=1.343914
! Fit after  self-cal, rms=0.079317Jy  sigma=1.343796
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079317Jy  sigma=1.343796
! Fit after  self-cal, rms=0.079821Jy  sigma=1.342052
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=4.354 mas, bpa=17.51 degrees
! Estimated noise=0.281629 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491507 Jy
! Component: 100  -  total flux cleaned = 0.000553556 Jy
! Component: 150  -  total flux cleaned = 0.000606909 Jy
! Component: 200  -  total flux cleaned = 0.000699011 Jy
! Total flux subtracted in 200 components = 0.000699011 Jy
! Clean residual min=-0.001616 max=0.002034 Jy/beam
! Clean residual mean=-0.000001 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.15695 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 162 components and 0.15695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079801Jy  sigma=1.341679
! Fit after  self-cal, rms=0.079821Jy  sigma=1.341591
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, 36.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00179081 Jy
! Component: 100  -  total flux cleaned = 0.00213303 Jy
! Component: 150  -  total flux cleaned = 0.00241733 Jy
! Component: 200  -  total flux cleaned = 0.00259514 Jy
! Total flux subtracted in 200 components = 0.00259514 Jy
! Clean residual min=-0.001445 max=0.001803 Jy/beam
! Clean residual mean=-0.000000 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.159545 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 179 components and 0.159545 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079777Jy  sigma=1.340675
! Fit after  self-cal, rms=0.079770Jy  sigma=1.340548
! Inverting map 
! Added new window around map position (-14.4, -3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152851 Jy
! Component: 100  -  total flux cleaned = 0.00246132 Jy
! Component: 150  -  total flux cleaned = 0.00295349 Jy
! Component: 200  -  total flux cleaned = 0.00326677 Jy
! Total flux subtracted in 200 components = 0.00326677 Jy
! Clean residual min=-0.001381 max=0.001491 Jy/beam
! Clean residual mean=-0.000000 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.162812 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 194 components and 0.162812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079732Jy  sigma=1.339821
! Fit after  self-cal, rms=0.079728Jy  sigma=1.339737
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079728Jy  sigma=1.339737
! Fit after  self-cal, rms=0.079898Jy  sigma=1.339429
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.351 mas, bmaj=7.566 mas, bpa=5.472 degrees
! Estimated noise=0.321788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000779997 Jy
! Component: 100  -  total flux cleaned = 0.00108454 Jy
! Component: 150  -  total flux cleaned = 0.00130932 Jy
! Component: 200  -  total flux cleaned = 0.00141657 Jy
! Total flux subtracted in 200 components = 0.00141657 Jy
! Clean residual min=-0.001236 max=0.001401 Jy/beam
! Clean residual mean=-0.000000 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.164229 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 224 components and 0.164229 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079887Jy  sigma=1.339236
! Fit after  self-cal, rms=0.079890Jy  sigma=1.339204
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136593 Jy
! Component: 100  -  total flux cleaned = 0.000201679 Jy
! Component: 150  -  total flux cleaned = 0.000292114 Jy
! Component: 200  -  total flux cleaned = 0.000376679 Jy
! Total flux subtracted in 200 components = 0.000376679 Jy
! Clean residual min=-0.001174 max=0.001373 Jy/beam
! Clean residual mean=0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.164605 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 242 components and 0.164605 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079885Jy  sigma=1.339110
! Fit after  self-cal, rms=0.079884Jy  sigma=1.339102
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=4.358 mas, bpa=17.54 degrees
! Estimated noise=0.281446 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 4.358 at 17.54 degrees (North through East)
! Clean map  min=-0.0012206  max=0.099935 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.75 mas, bmaj=3.747 mas, bpa=20.19 degrees
! Estimated noise=0.587078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0755465 Jy
! Component: 100  -  total flux cleaned = 0.0992693 Jy
! Component: 150  -  total flux cleaned = 0.113626 Jy
! Component: 200  -  total flux cleaned = 0.122921 Jy
! Total flux subtracted in 200 components = 0.122921 Jy
! Clean residual min=-0.004115 max=0.004968 Jy/beam
! Clean residual mean=-0.000006 rms=0.001139 Jy/beam
! Combined flux in latest and established models = 0.122921 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.122921 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=4.358 mas, bpa=17.54 degrees
! Estimated noise=0.281446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00945594 Jy
! Component: 100  -  total flux cleaned = 0.0151447 Jy
! Component: 150  -  total flux cleaned = 0.0191409 Jy
! Component: 200  -  total flux cleaned = 0.0223678 Jy
! Total flux subtracted in 200 components = 0.0223678 Jy
! Clean residual min=-0.001977 max=0.002000 Jy/beam
! Clean residual mean=-0.000005 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.145289 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 61 components and 0.145289 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.351 mas, bmaj=7.566 mas, bpa=5.472 degrees
! Estimated noise=0.321788 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360806 Jy
! Component: 100  -  total flux cleaned = 0.0063098 Jy
! Component: 150  -  total flux cleaned = 0.00844152 Jy
! Component: 200  -  total flux cleaned = 0.0101765 Jy
! Total flux subtracted in 200 components = 0.0101765 Jy
! Clean residual min=-0.001723 max=0.002119 Jy/beam
! Clean residual mean=-0.000005 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.155465 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145795 Jy
! Component: 100  -  total flux cleaned = 0.00270678 Jy
! Component: 150  -  total flux cleaned = 0.0037839 Jy
! Component: 200  -  total flux cleaned = 0.00471485 Jy
! Total flux subtracted in 200 components = 0.00471485 Jy
! Clean residual min=-0.001412 max=0.001690 Jy/beam
! Clean residual mean=-0.000003 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.16018 Jy
! Adding 91 model components to the UV plane model.
! The established model now contains 138 components and 0.16018 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=4.358 mas, bpa=17.54 degrees
! Estimated noise=0.281446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00079482 Jy
! Component: 100  -  total flux cleaned = 0.00130427 Jy
! Component: 150  -  total flux cleaned = 0.0016163 Jy
! Component: 200  -  total flux cleaned = 0.00190053 Jy
! Total flux subtracted in 200 components = 0.00190053 Jy
! Clean residual min=-0.001366 max=0.001467 Jy/beam
! Clean residual mean=-0.000001 rms=0.000334 Jy/beam
! Combined flux in latest and established models = 0.162081 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 169 components and 0.162081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079916Jy  sigma=1.339707
! Fit after  self-cal, rms=0.079909Jy  sigma=1.339607
wmodel /J0204-3328_X_map.mod
! wmodel: Unable to open new model file: /J0204-3328_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0204-3328_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 4.358 at 17.54 degrees (North through East)
! Clean map  min=-0.0013034  max=0.099011 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0204-3328_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0990106 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000328862 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.996445 0.996445 1.99289 3.98578 7.97156 15.9431 31.8862 63.7725
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.099 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  301.07 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0204-3328_X_dfm.log closed on Thu May 19 22:58:23 2016