! Started logfile: /scr/pima/bg219i_uvs/J0202-0559_X_dfm.log on Thu May 19 22:57:55 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0202-0559_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0202-0559_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.805556 visibilities/baseline/integration-bin.
! Found source: J0202-0559
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0202-0559_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 24 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008929Jy  sigma=22.437282
! Fit after  self-cal, rms=0.892644Jy  sigma=19.808006
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8307 mas, bmaj=1.759 mas, bpa=5.623 degrees
! Estimated noise=0.424834 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0836702 Jy
! Component: 100  -  total flux cleaned = 0.102642 Jy
! Total flux subtracted in 100 components = 0.102642 Jy
! Clean residual min=-0.003167 max=0.006910 Jy/beam
! Clean residual mean=0.000002 rms=0.000888 Jy/beam
! Combined flux in latest and established models = 0.102642 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.102642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068039Jy  sigma=1.387011
! Fit after  self-cal, rms=0.067973Jy  sigma=1.385698
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00738227 Jy
! Component: 100  -  total flux cleaned = 0.0110188 Jy
! Total flux subtracted in 100 components = 0.0110188 Jy
! Clean residual min=-0.002523 max=0.002752 Jy/beam
! Clean residual mean=0.000001 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.113661 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.113661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067075Jy  sigma=1.360629
! Fit after  self-cal, rms=0.067079Jy  sigma=1.360255
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=2.12 mas, bpa=5.379 degrees
! Estimated noise=0.227423 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292975 Jy
! Component: 100  -  total flux cleaned = 0.00426606 Jy
! Component: 150  -  total flux cleaned = 0.00501242 Jy
! Component: 200  -  total flux cleaned = 0.00544106 Jy
! Total flux subtracted in 200 components = 0.00544106 Jy
! Clean residual min=-0.001645 max=0.002507 Jy/beam
! Clean residual mean=0.000004 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.119102 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.119102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066975Jy  sigma=1.357102
! Fit after  self-cal, rms=0.066985Jy  sigma=1.357055
! Inverting map 
! Added new window around map position (-3.8, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00248192 Jy
! Component: 100  -  total flux cleaned = 0.00394298 Jy
! Component: 150  -  total flux cleaned = 0.00491617 Jy
! Component: 200  -  total flux cleaned = 0.00545845 Jy
! Total flux subtracted in 200 components = 0.00545845 Jy
! Clean residual min=-0.001408 max=0.001590 Jy/beam
! Clean residual mean=0.000004 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.12456 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 50 components and 0.12456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066885Jy  sigma=1.354681
! Fit after  self-cal, rms=0.066876Jy  sigma=1.354434
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.057 x 2.12 at 5.379 degrees (North through East)
! Clean map  min=-0.0013627  max=0.10914 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.05     OV        1.01     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.06     KP        1.01     
!   LA        0.98     MK        1.01     NL        0.97     OV        0.98     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.01     KP        1.02     
!   LA        0.95     MK        1.00     NL        1.03     OV        0.98     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     HN        0.98     KP        0.98     
!   LA        1.02     MK        0.95     NL        1.04     OV        0.98     
!   PT        0.96     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.01     KP        1.02     
!   LA        0.98     MK        0.99     NL        0.98     OV        1.00     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.01     KP        0.99     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.99     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.04     HN        1.02     KP        1.00     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.98     
!   PT        1.03     SC        0.96     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.95     NL        0.99     OV        1.00     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.02     KP        1.01     
!   LA        1.03     MK        0.96     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.96     MK        0.97     NL        1.02     OV        1.00     
!   PT        1.01     SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.09     HN        0.96     KP        0.99     
!   LA        1.01     MK        1.00     NL        0.96     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.96     KP        0.98     
!   LA        0.98     MK        1.05     NL        0.95     OV        1.00     
!   PT        1.00     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.066876Jy  sigma=1.354434
! Fit after  self-cal, rms=0.066926Jy  sigma=1.351658
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.056 mas, bmaj=2.118 mas, bpa=5.315 degrees
! Estimated noise=0.227187 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000524091 Jy
! Component: 100  -  total flux cleaned = 0.000586652 Jy
! Component: 150  -  total flux cleaned = 0.000623892 Jy
! Component: 200  -  total flux cleaned = 0.000640497 Jy
! Total flux subtracted in 200 components = 0.000640497 Jy
! Clean residual min=-0.001334 max=0.001324 Jy/beam
! Clean residual mean=0.000004 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.125201 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 59 components and 0.125201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066912Jy  sigma=1.351432
! Fit after  self-cal, rms=0.066929Jy  sigma=1.351362
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066929Jy  sigma=1.351362
! Fit after  self-cal, rms=0.067725Jy  sigma=1.348283
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.057 mas, bmaj=2.122 mas, bpa=5.457 degrees
! Estimated noise=0.227418 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000358355 Jy
! Component: 100  -  total flux cleaned = 0.000357539 Jy
! Component: 150  -  total flux cleaned = 0.000358246 Jy
! Component: 200  -  total flux cleaned = 0.000345258 Jy
! Total flux subtracted in 200 components = 0.000345258 Jy
! Clean residual min=-0.001191 max=0.001276 Jy/beam
! Clean residual mean=0.000003 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.125546 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 72 components and 0.125546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067716Jy  sigma=1.348133
! Fit after  self-cal, rms=0.067734Jy  sigma=1.348076
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.8, -6.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00056346 Jy
! Component: 100  -  total flux cleaned = 0.000462427 Jy
! Component: 150  -  total flux cleaned = 0.000359648 Jy
! Component: 200  -  total flux cleaned = 0.000284704 Jy
! Total flux subtracted in 200 components = 0.000284704 Jy
! Clean residual min=-0.001106 max=0.001171 Jy/beam
! Clean residual mean=0.000003 rms=0.000278 Jy/beam
! Combined flux in latest and established models = 0.125831 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 90 components and 0.125831 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067709Jy  sigma=1.347577
! Fit after  self-cal, rms=0.067708Jy  sigma=1.347545
! Inverting map 
! Added new window around map position (-35, 16.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547606 Jy
! Component: 100  -  total flux cleaned = 0.000403481 Jy
! Component: 150  -  total flux cleaned = 0.00045105 Jy
! Component: 200  -  total flux cleaned = 0.000473296 Jy
! Total flux subtracted in 200 components = 0.000473296 Jy
! Clean residual min=-0.001092 max=0.001128 Jy/beam
! Clean residual mean=0.000003 rms=0.000265 Jy/beam
! Combined flux in latest and established models = 0.126304 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 101 components and 0.126304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067680Jy  sigma=1.347054
! Fit after  self-cal, rms=0.067679Jy  sigma=1.347027
! Inverting map 
! Added new window around map position (-34.6, -50).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000511884 Jy
! Component: 100  -  total flux cleaned = 0.000626195 Jy
! Component: 150  -  total flux cleaned = 0.000586499 Jy
! Component: 200  -  total flux cleaned = 0.00058711 Jy
! Total flux subtracted in 200 components = 0.00058711 Jy
! Clean residual min=-0.001117 max=0.001097 Jy/beam
! Clean residual mean=0.000003 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.126891 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.126891 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067655Jy  sigma=1.346668
! Fit after  self-cal, rms=0.067651Jy  sigma=1.346640
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067651Jy  sigma=1.346640
! Fit after  self-cal, rms=0.067630Jy  sigma=1.346575
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.122 mas, bpa=5.462 degrees
! Estimated noise=0.227292 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000231619 Jy
! Component: 100  -  total flux cleaned = 0.000232708 Jy
! Component: 150  -  total flux cleaned = 0.000179984 Jy
! Component: 200  -  total flux cleaned = 0.000163263 Jy
! Total flux subtracted in 200 components = 0.000163263 Jy
! Clean residual min=-0.001107 max=0.001091 Jy/beam
! Clean residual mean=0.000003 rms=0.000255 Jy/beam
! Combined flux in latest and established models = 0.127054 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 120 components and 0.127054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067618Jy  sigma=1.346401
! Fit after  self-cal, rms=0.067617Jy  sigma=1.346391
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.28723e-05 Jy
! Component: 100  -  total flux cleaned = -6.13433e-05 Jy
! Component: 150  -  total flux cleaned = -9.24598e-05 Jy
! Component: 200  -  total flux cleaned = -0.000107202 Jy
! Total flux subtracted in 200 components = -0.000107202 Jy
! Clean residual min=-0.001112 max=0.001093 Jy/beam
! Clean residual mean=0.000003 rms=0.000252 Jy/beam
! Combined flux in latest and established models = 0.126947 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 125 components and 0.126947 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067609Jy  sigma=1.346268
! Fit after  self-cal, rms=0.067608Jy  sigma=1.346267
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067608Jy  sigma=1.346267
! Fit after  self-cal, rms=0.067588Jy  sigma=1.346256
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.163 mas, bmaj=3.529 mas, bpa=-0.2204 degrees
! Estimated noise=0.270648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000421709 Jy
! Component: 100  -  total flux cleaned = -0.000554281 Jy
! Component: 150  -  total flux cleaned = -0.000565718 Jy
! Component: 200  -  total flux cleaned = -0.000607364 Jy
! Total flux subtracted in 200 components = -0.000607364 Jy
! Clean residual min=-0.001021 max=0.000913 Jy/beam
! Clean residual mean=0.000006 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.12634 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 139 components and 0.12634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067585Jy  sigma=1.346197
! Fit after  self-cal, rms=0.067584Jy  sigma=1.346188
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000103773 Jy
! Component: 100  -  total flux cleaned = -0.000134709 Jy
! Component: 150  -  total flux cleaned = -0.000172709 Jy
! Component: 200  -  total flux cleaned = -0.00021775 Jy
! Total flux subtracted in 200 components = -0.00021775 Jy
! Clean residual min=-0.001032 max=0.000912 Jy/beam
! Clean residual mean=0.000006 rms=0.000253 Jy/beam
! Combined flux in latest and established models = 0.126122 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 149 components and 0.126122 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067582Jy  sigma=1.346155
! Fit after  self-cal, rms=0.067581Jy  sigma=1.346153
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.122 mas, bpa=5.483 degrees
! Estimated noise=0.227243 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.058 x 2.122 at 5.483 degrees (North through East)
! Clean map  min=-0.0011794  max=0.10914 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8312 mas, bmaj=1.762 mas, bpa=5.854 degrees
! Estimated noise=0.42523 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0836657 Jy
! Component: 100  -  total flux cleaned = 0.102902 Jy
! Component: 150  -  total flux cleaned = 0.110408 Jy
! Component: 200  -  total flux cleaned = 0.11427 Jy
! Total flux subtracted in 200 components = 0.11427 Jy
! Clean residual min=-0.002710 max=0.002727 Jy/beam
! Clean residual mean=0.000001 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.11427 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.11427 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.122 mas, bpa=5.483 degrees
! Estimated noise=0.227243 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334191 Jy
! Component: 100  -  total flux cleaned = 0.00545646 Jy
! Component: 150  -  total flux cleaned = 0.00717163 Jy
! Component: 200  -  total flux cleaned = 0.00858899 Jy
! Total flux subtracted in 200 components = 0.00858899 Jy
! Clean residual min=-0.001229 max=0.001197 Jy/beam
! Clean residual mean=0.000004 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.122859 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 27 components and 0.122859 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.163 mas, bmaj=3.529 mas, bpa=-0.2204 degrees
! Estimated noise=0.270648 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159424 Jy
! Component: 100  -  total flux cleaned = 0.00233637 Jy
! Component: 150  -  total flux cleaned = 0.00261509 Jy
! Component: 200  -  total flux cleaned = 0.00287508 Jy
! Total flux subtracted in 200 components = 0.00287508 Jy
! Clean residual min=-0.001221 max=0.001082 Jy/beam
! Clean residual mean=0.000008 rms=0.000296 Jy/beam
! Combined flux in latest and established models = 0.125735 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000180823 Jy
! Component: 100  -  total flux cleaned = 0.000200086 Jy
! Component: 150  -  total flux cleaned = 0.000219165 Jy
! Component: 200  -  total flux cleaned = 0.000202217 Jy
! Total flux subtracted in 200 components = 0.000202217 Jy
! Clean residual min=-0.001189 max=0.001012 Jy/beam
! Clean residual mean=0.000007 rms=0.000280 Jy/beam
! Combined flux in latest and established models = 0.125937 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 95 components and 0.125937 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.058 mas, bmaj=2.122 mas, bpa=5.483 degrees
! Estimated noise=0.227243 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346327 Jy
! Component: 100  -  total flux cleaned = 0.000377699 Jy
! Component: 150  -  total flux cleaned = 0.000482905 Jy
! Component: 200  -  total flux cleaned = 0.000433942 Jy
! Total flux subtracted in 200 components = 0.000433942 Jy
! Clean residual min=-0.001135 max=0.001104 Jy/beam
! Clean residual mean=0.000003 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.126371 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 111 components and 0.126371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067628Jy  sigma=1.346873
! Fit after  self-cal, rms=0.067621Jy  sigma=1.346812
wmodel /J0202-0559_X_map.mod
! wmodel: Unable to open new model file: /J0202-0559_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0202-0559_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.058 x 2.122 at 5.483 degrees (North through East)
! Clean map  min=-0.0010766  max=0.10949 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0202-0559_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.109492 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000262445 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.719081 0.719081 1.43816 2.87632 5.75265 11.5053 23.0106 46.0212 92.0423
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0007 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.109 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  417.199 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0202-0559_X_dfm.log closed on Thu May 19 22:57:59 2016