! Started logfile: /scr/pima/bg219i_uvs/J0202-0559_S_uvs.log on Wed Apr 6 22:48:48 2016 obs /scr/pima/bg219i_uvs/J0202-0559_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219i_uvs/J0202-0559_S_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.9 visibilities/baseline/integration-bin. ! Found source: J0202-0559 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7776 visibilities. select rr, 1,2,3,4,6,7,8 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0202-0559_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 24 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003482Jy sigma=20.874614 ! Fit after self-cal, rms=0.924746Jy sigma=19.247726 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=6.878 mas, bpa=3.943 degrees ! Estimated noise=0.527416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591159 Jy ! Component: 100 - total flux cleaned = 0.0728715 Jy ! Total flux subtracted in 100 components = 0.0728715 Jy ! Clean residual min=-0.003547 max=0.005543 Jy/beam ! Clean residual mean=-0.000004 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.0728715 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0728715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065890Jy sigma=1.330793 ! Fit after self-cal, rms=0.065821Jy sigma=1.329451 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571674 Jy ! Component: 100 - total flux cleaned = 0.00891788 Jy ! Total flux subtracted in 100 components = 0.00891788 Jy ! Clean residual min=-0.002847 max=0.004668 Jy/beam ! Clean residual mean=0.000001 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0817893 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 21 components and 0.0817893 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065259Jy sigma=1.316967 ! Fit after self-cal, rms=0.065260Jy sigma=1.316730 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.916 mas, bmaj=7.91 mas, bpa=3.723 degrees ! Estimated noise=0.390222 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468012 Jy ! Component: 100 - total flux cleaned = 0.00701317 Jy ! Component: 150 - total flux cleaned = 0.0086476 Jy ! Component: 200 - total flux cleaned = 0.00986241 Jy ! Total flux subtracted in 200 components = 0.00986241 Jy ! Clean residual min=-0.002428 max=0.002507 Jy/beam ! Clean residual mean=0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0916517 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 55 components and 0.0916518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064925Jy sigma=1.309139 ! Fit after self-cal, rms=0.064874Jy sigma=1.308232 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.916 x 7.91 at 3.723 degrees (North through East) ! Clean map min=-0.0023414 max=0.074416 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.07 HN 1.06 KP 0.99 ! LA 0.95 MK 1.04 NL 1.01 OV 1.00 ! PT 0.93 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 0.98 KP 1.01 ! LA 0.95 MK 1.00 NL 1.10 OV 1.01 ! PT 0.98 SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.96 HN 1.03 KP 1.01 ! LA 1.00 MK 1.06 NL 1.03 OV 1.04 ! PT 0.95 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.01 HN 1.04 KP 0.96 ! LA 0.97 MK 0.95 NL 0.98 OV 1.04 ! PT 0.90 SC 1.03 ! ! ! Fit before self-cal, rms=0.064874Jy sigma=1.308232 ! Fit after self-cal, rms=0.065084Jy sigma=1.304773 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=7.948 mas, bpa=3.93 degrees ! Estimated noise=0.390123 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.19162e-05 Jy ! Component: 100 - total flux cleaned = 0.000152145 Jy ! Component: 150 - total flux cleaned = 0.000179567 Jy ! Component: 200 - total flux cleaned = 0.000137376 Jy ! Total flux subtracted in 200 components = 0.000137376 Jy ! Clean residual min=-0.002039 max=0.002189 Jy/beam ! Clean residual mean=0.000003 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0917891 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.0917891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065059Jy sigma=1.304171 ! Fit after self-cal, rms=0.065082Jy sigma=1.303983 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065082Jy sigma=1.303983 ! Fit after self-cal, rms=0.065110Jy sigma=1.301372 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=7.961 mas, bpa=3.837 degrees ! Estimated noise=0.389864 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000132595 Jy ! Component: 100 - total flux cleaned = 0.000114967 Jy ! Component: 150 - total flux cleaned = 6.81002e-05 Jy ! Component: 200 - total flux cleaned = 4.03284e-05 Jy ! Total flux subtracted in 200 components = 4.03284e-05 Jy ! Clean residual min=-0.001923 max=0.002005 Jy/beam ! Clean residual mean=0.000004 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.0918295 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.0918294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065102Jy sigma=1.301161 ! Fit after self-cal, rms=0.065113Jy sigma=1.301055 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.80794e-05 Jy ! Component: 100 - total flux cleaned = 8.49714e-05 Jy ! Component: 150 - total flux cleaned = 4.83334e-05 Jy ! Component: 200 - total flux cleaned = 2.57859e-05 Jy ! Total flux subtracted in 200 components = 2.57859e-05 Jy ! Clean residual min=-0.001932 max=0.002023 Jy/beam ! Clean residual mean=0.000004 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.0918552 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 92 components and 0.0918552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065109Jy sigma=1.300954 ! Fit after self-cal, rms=0.065108Jy sigma=1.300946 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065108Jy sigma=1.300946 ! Fit after self-cal, rms=0.065069Jy sigma=1.300926 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.936 mas, bmaj=7.968 mas, bpa=3.849 degrees ! Estimated noise=0.389299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000106077 Jy ! Component: 100 - total flux cleaned = -0.000129218 Jy ! Component: 150 - total flux cleaned = -0.000139532 Jy ! Component: 200 - total flux cleaned = -0.000159471 Jy ! Total flux subtracted in 200 components = -0.000159471 Jy ! Clean residual min=-0.001893 max=0.001991 Jy/beam ! Clean residual mean=0.000003 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.0916957 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.0916957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065065Jy sigma=1.300844 ! Fit after self-cal, rms=0.065066Jy sigma=1.300839 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.59079e-05 Jy ! Component: 100 - total flux cleaned = 1.71631e-05 Jy ! Component: 150 - total flux cleaned = 8.44746e-06 Jy ! Component: 200 - total flux cleaned = -3.33594e-08 Jy ! Total flux subtracted in 200 components = -3.33594e-08 Jy ! Clean residual min=-0.001889 max=0.001995 Jy/beam ! Clean residual mean=0.000003 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.0916957 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 99 components and 0.0916957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065064Jy sigma=1.300786 ! Fit after self-cal, rms=0.065063Jy sigma=1.300784 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065063Jy sigma=1.300784 ! Fit after self-cal, rms=0.065037Jy sigma=1.300777 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.703 mas, bmaj=12.73 mas, bpa=-0.7349 degrees ! Estimated noise=0.458832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000142184 Jy ! Component: 100 - total flux cleaned = -0.000174724 Jy ! Component: 150 - total flux cleaned = -0.000188277 Jy ! Component: 200 - total flux cleaned = -0.000200704 Jy ! Total flux subtracted in 200 components = -0.000200704 Jy ! Clean residual min=-0.001980 max=0.002009 Jy/beam ! Clean residual mean=0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.091495 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 0.091495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065037Jy sigma=1.300765 ! Fit after self-cal, rms=0.065036Jy sigma=1.300760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.64038e-05 Jy ! Component: 100 - total flux cleaned = -5.63294e-05 Jy ! Component: 150 - total flux cleaned = -6.74753e-05 Jy ! Component: 200 - total flux cleaned = -7.82455e-05 Jy ! Total flux subtracted in 200 components = -7.82455e-05 Jy ! Clean residual min=-0.001986 max=0.002037 Jy/beam ! Clean residual mean=0.000006 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0914168 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.0914168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065037Jy sigma=1.300759 ! Fit after self-cal, rms=0.065036Jy sigma=1.300760 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=7.973 mas, bpa=3.836 degrees ! Estimated noise=0.388983 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 7.973 at 3.836 degrees (North through East) ! Clean map min=-0.0018286 max=0.074395 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=6.923 mas, bpa=3.941 degrees ! Estimated noise=0.529222 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0592047 Jy ! Component: 100 - total flux cleaned = 0.0731503 Jy ! Component: 150 - total flux cleaned = 0.0792269 Jy ! Component: 200 - total flux cleaned = 0.083095 Jy ! Total flux subtracted in 200 components = 0.083095 Jy ! Clean residual min=-0.002877 max=0.002683 Jy/beam ! Clean residual mean=-0.000000 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.083095 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.083095 Jy ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=7.973 mas, bpa=3.836 degrees ! Estimated noise=0.388983 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00309081 Jy ! Component: 100 - total flux cleaned = 0.00488365 Jy ! Component: 150 - total flux cleaned = 0.00611568 Jy ! Component: 200 - total flux cleaned = 0.00671095 Jy ! Total flux subtracted in 200 components = 0.00671095 Jy ! Clean residual min=-0.001982 max=0.002014 Jy/beam ! Clean residual mean=0.000003 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.089806 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 63 components and 0.089806 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.703 mas, bmaj=12.73 mas, bpa=-0.7349 degrees ! Estimated noise=0.458832 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000710154 Jy ! Component: 100 - total flux cleaned = 0.000896856 Jy ! Component: 150 - total flux cleaned = 0.000982041 Jy ! Component: 200 - total flux cleaned = 0.00105426 Jy ! Total flux subtracted in 200 components = 0.00105426 Jy ! Clean residual min=-0.001940 max=0.002064 Jy/beam ! Clean residual mean=0.000006 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0908602 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.9875e-05 Jy ! Component: 100 - total flux cleaned = 9.45952e-05 Jy ! Component: 150 - total flux cleaned = 0.000134127 Jy ! Component: 200 - total flux cleaned = 0.000152186 Jy ! Total flux subtracted in 200 components = 0.000152186 Jy ! Clean residual min=-0.001957 max=0.002082 Jy/beam ! Clean residual mean=0.000006 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0910124 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 95 components and 0.0910124 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.939 mas, bmaj=7.973 mas, bpa=3.836 degrees ! Estimated noise=0.388983 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017448 Jy ! Component: 100 - total flux cleaned = -0.000112974 Jy ! Component: 150 - total flux cleaned = -5.90885e-05 Jy ! Component: 200 - total flux cleaned = -2.58068e-05 Jy ! Total flux subtracted in 200 components = -2.58068e-05 Jy ! Clean residual min=-0.001949 max=0.002042 Jy/beam ! Clean residual mean=0.000003 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0909866 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 109 components and 0.0909866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065054Jy sigma=1.301018 ! Fit after self-cal, rms=0.065047Jy sigma=1.300958 wmodel /scr/pima/bg219i_uvs/J0202-0559_S_map.mod ! Writing 109 model components to file: /scr/pima/bg219i_uvs/J0202-0559_S_map.mod wobs /scr/pima/bg219i_uvs/J0202-0559_S_uvs.fits ! Writing UV FITS file: /scr/pima/bg219i_uvs/J0202-0559_S_uvs.fits wwins /scr/pima/bg219i_uvs/J0202-0559_S_map.win ! wwins: Wrote 2 windows to /scr/pima/bg219i_uvs/J0202-0559_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00026278 Jy ! Component: 100 - total flux cleaned = 0.000390631 Jy ! Component: 150 - total flux cleaned = 0.000482985 Jy ! Component: 200 - total flux cleaned = 0.000394106 Jy ! Component: 250 - total flux cleaned = 0.000365214 Jy ! Component: 300 - total flux cleaned = 0.000337858 Jy ! Component: 350 - total flux cleaned = 0.000338193 Jy ! Component: 400 - total flux cleaned = 0.000338657 Jy ! Component: 450 - total flux cleaned = 0.000288007 Jy ! Component: 500 - total flux cleaned = 0.00026289 Jy ! Component: 550 - total flux cleaned = 0.000262634 Jy ! Component: 600 - total flux cleaned = 0.000214298 Jy ! Component: 650 - total flux cleaned = 0.000190415 Jy ! Component: 700 - total flux cleaned = 0.000144596 Jy ! Component: 750 - total flux cleaned = 0.000167407 Jy ! Component: 800 - total flux cleaned = 0.000233382 Jy ! Component: 850 - total flux cleaned = 0.000254974 Jy ! Component: 900 - total flux cleaned = 0.0002553 Jy ! Component: 950 - total flux cleaned = 0.000339017 Jy ! Component: 1000 - total flux cleaned = 0.000338781 Jy ! Component: 1050 - total flux cleaned = 0.00033836 Jy ! Component: 1100 - total flux cleaned = 0.000358763 Jy ! Component: 1150 - total flux cleaned = 0.000457548 Jy ! Component: 1200 - total flux cleaned = 0.00049631 Jy ! Component: 1250 - total flux cleaned = 0.000476956 Jy ! Component: 1300 - total flux cleaned = 0.000590515 Jy ! Component: 1350 - total flux cleaned = 0.000628033 Jy ! Component: 1400 - total flux cleaned = 0.000702115 Jy ! Component: 1450 - total flux cleaned = 0.000884347 Jy ! Component: 1500 - total flux cleaned = 0.000992021 Jy ! Component: 1550 - total flux cleaned = 0.00109848 Jy ! Component: 1600 - total flux cleaned = 0.0011515 Jy ! Component: 1650 - total flux cleaned = 0.0012387 Jy ! Component: 1700 - total flux cleaned = 0.00135932 Jy ! Component: 1750 - total flux cleaned = 0.00144451 Jy ! Component: 1800 - total flux cleaned = 0.00152849 Jy ! Component: 1850 - total flux cleaned = 0.00154519 Jy ! Component: 1900 - total flux cleaned = 0.00167702 Jy ! Component: 1950 - total flux cleaned = 0.00174216 Jy ! Component: 2000 - total flux cleaned = 0.00187158 Jy ! Component: 2050 - total flux cleaned = 0.0019355 Jy ! Component: 2100 - total flux cleaned = 0.00199874 Jy ! Component: 2150 - total flux cleaned = 0.00206182 Jy ! Component: 2200 - total flux cleaned = 0.00212419 Jy ! Component: 2250 - total flux cleaned = 0.00218579 Jy ! Component: 2300 - total flux cleaned = 0.00227772 Jy ! Component: 2350 - total flux cleaned = 0.00232333 Jy ! Component: 2400 - total flux cleaned = 0.00238342 Jy ! Component: 2450 - total flux cleaned = 0.00241328 Jy ! Component: 2500 - total flux cleaned = 0.0025169 Jy ! Component: 2550 - total flux cleaned = 0.00248765 Jy ! Component: 2600 - total flux cleaned = 0.00258963 Jy ! Component: 2650 - total flux cleaned = 0.00261859 Jy ! Component: 2700 - total flux cleaned = 0.00267583 Jy ! Component: 2750 - total flux cleaned = 0.00271829 Jy ! Component: 2800 - total flux cleaned = 0.00281684 Jy ! Component: 2850 - total flux cleaned = 0.00283074 Jy ! Component: 2900 - total flux cleaned = 0.00285823 Jy ! Component: 2950 - total flux cleaned = 0.0028857 Jy ! Component: 3000 - total flux cleaned = 0.00289937 Jy ! Component: 3050 - total flux cleaned = 0.00289957 Jy ! Component: 3100 - total flux cleaned = 0.00300716 Jy ! Component: 3150 - total flux cleaned = 0.0030472 Jy ! Component: 3200 - total flux cleaned = 0.00300737 Jy ! Component: 3250 - total flux cleaned = 0.00309961 Jy ! Component: 3300 - total flux cleaned = 0.00311251 Jy ! Component: 3350 - total flux cleaned = 0.00308658 Jy ! Component: 3400 - total flux cleaned = 0.00318996 Jy ! Component: 3450 - total flux cleaned = 0.00325411 Jy ! Component: 3500 - total flux cleaned = 0.00324146 Jy ! Component: 3550 - total flux cleaned = 0.0032667 Jy ! Component: 3600 - total flux cleaned = 0.00329193 Jy ! Component: 3650 - total flux cleaned = 0.00334186 Jy ! Component: 3700 - total flux cleaned = 0.00337917 Jy ! Component: 3750 - total flux cleaned = 0.00336686 Jy ! Component: 3800 - total flux cleaned = 0.00339143 Jy ! Component: 3850 - total flux cleaned = 0.00334257 Jy ! Component: 3900 - total flux cleaned = 0.00340333 Jy ! Component: 3950 - total flux cleaned = 0.00339123 Jy ! Component: 4000 - total flux cleaned = 0.00340329 Jy ! Component: 4050 - total flux cleaned = 0.00342713 Jy ! Total flux subtracted in 4096 components = 0.00345089 Jy ! Clean residual min=-0.000670 max=0.000774 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.0944375 Jy keep ! Adding 302 model components to the UV plane model. ! The established model now contains 411 components and 0.0944375 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/bg219i_uvs/J0202-0559_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.939 x 7.973 at 3.836 degrees (North through East) ! Clean map min=-0.0013532 max=0.074533 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0202-0559_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0745325 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214926 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.865097 0.865097 1.73019 3.46039 6.92078 13.8416 27.6831 55.3662 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.074 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 346.781 quit ! Quitting program ! Log file /scr/pima/bg219i_uvs/J0202-0559_S_uvs.log closed on Wed Apr 6 22:48:52 2016