! Started logfile: /scr/pima/bg219i_uvs/J0202+4205_X_dfm.log on Thu May 19 22:57:48 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0202+4205_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0202+4205_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.785714 visibilities/baseline/integration-bin.
! Found source: J0202+4205
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 11880 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0202+4205_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 53 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.026407Jy  sigma=23.318696
! Fit after  self-cal, rms=0.784341Jy  sigma=17.678436
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8967 mas, bmaj=1.059 mas, bpa=-68.25 degrees
! Estimated noise=0.611697 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165005 Jy
! Component: 100  -  total flux cleaned = 0.204793 Jy
! Total flux subtracted in 100 components = 0.204793 Jy
! Clean residual min=-0.008530 max=0.016406 Jy/beam
! Clean residual mean=0.000022 rms=0.002019 Jy/beam
! Combined flux in latest and established models = 0.204793 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.204793 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075600Jy  sigma=1.608677
! Fit after  self-cal, rms=0.075596Jy  sigma=1.608258
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0176439 Jy
! Component: 100  -  total flux cleaned = 0.026299 Jy
! Total flux subtracted in 100 components = 0.026299 Jy
! Clean residual min=-0.005942 max=0.009419 Jy/beam
! Clean residual mean=0.000018 rms=0.001484 Jy/beam
! Combined flux in latest and established models = 0.231092 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.231092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.070861Jy  sigma=1.466411
! Fit after  self-cal, rms=0.070837Jy  sigma=1.465765
! Inverting map 
! Added new window around map position (-1.4, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00900429 Jy
! Component: 100  -  total flux cleaned = 0.0134219 Jy
! Total flux subtracted in 100 components = 0.0134219 Jy
! Clean residual min=-0.005431 max=0.008470 Jy/beam
! Clean residual mean=0.000014 rms=0.001325 Jy/beam
! Combined flux in latest and established models = 0.244514 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.244514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069435Jy  sigma=1.430526
! Fit after  self-cal, rms=0.069322Jy  sigma=1.427851
! Inverting map 
! Added new window around map position (0.8, -8.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00695094 Jy
! Component: 100  -  total flux cleaned = 0.0105666 Jy
! Total flux subtracted in 100 components = 0.0105666 Jy
! Clean residual min=-0.005226 max=0.005838 Jy/beam
! Clean residual mean=0.000010 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.25508 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 20 components and 0.25508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068717Jy  sigma=1.416264
! Fit after  self-cal, rms=0.068652Jy  sigma=1.414449
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.146 mas, bmaj=1.399 mas, bpa=-63.68 degrees
! Estimated noise=0.322251 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00386918 Jy
! Component: 100  -  total flux cleaned = 0.00601371 Jy
! Component: 150  -  total flux cleaned = 0.00700331 Jy
! Component: 200  -  total flux cleaned = 0.00730739 Jy
! Total flux subtracted in 200 components = 0.00730739 Jy
! Clean residual min=-0.004523 max=0.004815 Jy/beam
! Clean residual mean=0.000010 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.262388 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 34 components and 0.262388 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068419Jy  sigma=1.408533
! Fit after  self-cal, rms=0.068399Jy  sigma=1.408107
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.146 x 1.399 at -63.68 degrees (North through East)
! Clean map  min=-0.0042753  max=0.21487 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.96     KP        1.02     
!   LA        0.96     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.99     SC        1.13     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.00     NL        1.02     OV        0.97     
!   PT        0.98     SC        1.11     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     HN        1.00     KP        1.00     
!   LA        0.99     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.08     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.07     HN        1.01     KP        0.99     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.96     
!   PT        0.97     SC        1.14     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        1.03     KP        1.00     
!   LA        0.97     MK        0.99     NL        1.00     OV        0.98     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.04     HN        1.02     KP        1.00     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.97     
!   PT        0.98     SC        1.12     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        1.00     KP        0.99     
!   LA        0.97     MK        1.00     NL        1.01     OV        0.96     
!   PT        1.01     SC        1.13     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.01     KP        1.01     
!   LA        0.98     MK        0.98     NL        0.97     OV        0.96     
!   PT        0.97     SC        1.11     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        0.94     KP        0.99     
!   LA        0.96     MK        0.98     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.12     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.06     HN        0.96     KP        1.01     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.97     
!   PT        1.00     SC        1.10     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.07     HN        1.04     KP        0.98     
!   LA        0.97     MK        0.99     NL        0.99     OV        0.98     
!   PT        1.01     SC        1.08     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.98     KP        1.00     
!   LA        0.97     MK        1.00     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.068399Jy  sigma=1.408107
! Fit after  self-cal, rms=0.068911Jy  sigma=1.385273
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.15 mas, bmaj=1.43 mas, bpa=-62.35 degrees
! Estimated noise=0.323443 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00316089 Jy
! Component: 100  -  total flux cleaned = -0.00416107 Jy
! Component: 150  -  total flux cleaned = -0.00448273 Jy
! Component: 200  -  total flux cleaned = -0.00458831 Jy
! Total flux subtracted in 200 components = -0.00458831 Jy
! Clean residual min=-0.003332 max=0.003443 Jy/beam
! Clean residual mean=0.000019 rms=0.000779 Jy/beam
! Combined flux in latest and established models = 0.257799 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.257799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068727Jy  sigma=1.380824
! Fit after  self-cal, rms=0.068751Jy  sigma=1.380502
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068751Jy  sigma=1.380502
! Fit after  self-cal, rms=0.069857Jy  sigma=1.362441
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.152 mas, bmaj=1.412 mas, bpa=-64.53 degrees
! Estimated noise=0.323166 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00207093 Jy
! Component: 100  -  total flux cleaned = -0.00240577 Jy
! Component: 150  -  total flux cleaned = -0.00265451 Jy
! Component: 200  -  total flux cleaned = -0.00278931 Jy
! Total flux subtracted in 200 components = -0.00278931 Jy
! Clean residual min=-0.002209 max=0.002259 Jy/beam
! Clean residual mean=0.000017 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.25501 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 56 components and 0.25501 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069787Jy  sigma=1.360148
! Fit after  self-cal, rms=0.069810Jy  sigma=1.359894
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00018699 Jy
! Component: 100  -  total flux cleaned = -0.000394285 Jy
! Component: 150  -  total flux cleaned = -0.000546283 Jy
! Component: 200  -  total flux cleaned = -0.000655614 Jy
! Total flux subtracted in 200 components = -0.000655614 Jy
! Clean residual min=-0.002162 max=0.002177 Jy/beam
! Clean residual mean=0.000017 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.254354 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 57 components and 0.254354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069794Jy  sigma=1.359280
! Fit after  self-cal, rms=0.069790Jy  sigma=1.359237
! Inverting map 
! Added new window around map position (28.6, 15.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001593 Jy
! Component: 100  -  total flux cleaned = 0.0019276 Jy
! Component: 150  -  total flux cleaned = 0.00213603 Jy
! Component: 200  -  total flux cleaned = 0.00234721 Jy
! Total flux subtracted in 200 components = 0.00234721 Jy
! Clean residual min=-0.002057 max=0.001970 Jy/beam
! Clean residual mean=0.000015 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.256701 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 71 components and 0.256701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069734Jy  sigma=1.357953
! Fit after  self-cal, rms=0.069732Jy  sigma=1.357868
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069732Jy  sigma=1.357868
! Fit after  self-cal, rms=0.069916Jy  sigma=1.357362
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=1.409 mas, bpa=-64.85 degrees
! Estimated noise=0.323049 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000503479 Jy
! Component: 100  -  total flux cleaned = -0.000592539 Jy
! Component: 150  -  total flux cleaned = -0.000697846 Jy
! Component: 200  -  total flux cleaned = -0.000745536 Jy
! Total flux subtracted in 200 components = -0.000745536 Jy
! Clean residual min=-0.002000 max=0.001886 Jy/beam
! Clean residual mean=0.000012 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.255956 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 79 components and 0.255956 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069894Jy  sigma=1.356762
! Fit after  self-cal, rms=0.069895Jy  sigma=1.356734
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.05878e-06 Jy
! Component: 100  -  total flux cleaned = 8.33308e-07 Jy
! Component: 150  -  total flux cleaned = -1.89756e-05 Jy
! Component: 200  -  total flux cleaned = -5.65301e-05 Jy
! Total flux subtracted in 200 components = -5.65301e-05 Jy
! Clean residual min=-0.001967 max=0.001837 Jy/beam
! Clean residual mean=0.000012 rms=0.000448 Jy/beam
! Combined flux in latest and established models = 0.255899 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 84 components and 0.255899 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069884Jy  sigma=1.356437
! Fit after  self-cal, rms=0.069883Jy  sigma=1.356426
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069883Jy  sigma=1.356426
! Fit after  self-cal, rms=0.069954Jy  sigma=1.356334
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=2.649 mas, bpa=77.63 degrees
! Estimated noise=0.383657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000485517 Jy
! Component: 100  -  total flux cleaned = -0.000393298 Jy
! Component: 150  -  total flux cleaned = -0.00033441 Jy
! Component: 200  -  total flux cleaned = -0.000282346 Jy
! Total flux subtracted in 200 components = -0.000282346 Jy
! Clean residual min=-0.002245 max=0.002136 Jy/beam
! Clean residual mean=0.000022 rms=0.000540 Jy/beam
! Combined flux in latest and established models = 0.255617 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 96 components and 0.255617 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069954Jy  sigma=1.356131
! Fit after  self-cal, rms=0.069953Jy  sigma=1.356103
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129516 Jy
! Component: 100  -  total flux cleaned = -6.58191e-05 Jy
! Component: 150  -  total flux cleaned = -5.08606e-05 Jy
! Component: 200  -  total flux cleaned = -5.06183e-05 Jy
! Total flux subtracted in 200 components = -5.06183e-05 Jy
! Clean residual min=-0.002222 max=0.002097 Jy/beam
! Clean residual mean=0.000022 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.255567 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 99 components and 0.255567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069955Jy  sigma=1.356079
! Fit after  self-cal, rms=0.069955Jy  sigma=1.356069
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=1.408 mas, bpa=-65.03 degrees
! Estimated noise=0.3229 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.151 x 1.408 at -65.03 degrees (North through East)
! Clean map  min=-0.0017654  max=0.21605 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8977 mas, bmaj=1.067 mas, bpa=-69.24 degrees
! Estimated noise=0.615645 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.165882 Jy
! Component: 100  -  total flux cleaned = 0.205528 Jy
! Component: 150  -  total flux cleaned = 0.223838 Jy
! Component: 200  -  total flux cleaned = 0.23362 Jy
! Total flux subtracted in 200 components = 0.23362 Jy
! Clean residual min=-0.004011 max=0.005311 Jy/beam
! Clean residual mean=0.000012 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.23362 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.23362 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=1.408 mas, bpa=-65.03 degrees
! Estimated noise=0.3229 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00795275 Jy
! Component: 100  -  total flux cleaned = 0.0118474 Jy
! Component: 150  -  total flux cleaned = 0.0144694 Jy
! Component: 200  -  total flux cleaned = 0.0164076 Jy
! Total flux subtracted in 200 components = 0.0164076 Jy
! Clean residual min=-0.002223 max=0.002292 Jy/beam
! Clean residual mean=0.000012 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.250028 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 32 components and 0.250028 Jy
! Inverting map 
! Added new window around map position (-2.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211498 Jy
! Component: 100  -  total flux cleaned = 0.00302219 Jy
! Component: 150  -  total flux cleaned = 0.00335454 Jy
! Component: 200  -  total flux cleaned = 0.00348026 Jy
! Total flux subtracted in 200 components = 0.00348026 Jy
! Clean residual min=-0.001964 max=0.001864 Jy/beam
! Clean residual mean=0.000012 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.253508 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 46 components and 0.253508 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.32 mas, bmaj=2.649 mas, bpa=77.63 degrees
! Estimated noise=0.383657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000920636 Jy
! Component: 100  -  total flux cleaned = 0.00121562 Jy
! Component: 150  -  total flux cleaned = 0.00144183 Jy
! Component: 200  -  total flux cleaned = 0.00161935 Jy
! Total flux subtracted in 200 components = 0.00161935 Jy
! Clean residual min=-0.002051 max=0.001975 Jy/beam
! Clean residual mean=0.000022 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.255127 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000182284 Jy
! Component: 100  -  total flux cleaned = 0.000345309 Jy
! Component: 150  -  total flux cleaned = 0.000474022 Jy
! Component: 200  -  total flux cleaned = 0.000606376 Jy
! Total flux subtracted in 200 components = 0.000606376 Jy
! Clean residual min=-0.002007 max=0.001978 Jy/beam
! Clean residual mean=0.000022 rms=0.000509 Jy/beam
! Combined flux in latest and established models = 0.255734 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 0.255734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.151 mas, bmaj=1.408 mas, bpa=-65.03 degrees
! Estimated noise=0.3229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.01844e-05 Jy
! Component: 100  -  total flux cleaned = 8.31851e-05 Jy
! Component: 150  -  total flux cleaned = 8.28924e-05 Jy
! Component: 200  -  total flux cleaned = 0.000108251 Jy
! Total flux subtracted in 200 components = 0.000108251 Jy
! Clean residual min=-0.001802 max=0.001746 Jy/beam
! Clean residual mean=0.000011 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.255842 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 81 components and 0.255842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069956Jy  sigma=1.355635
! Fit after  self-cal, rms=0.069939Jy  sigma=1.355322
wmodel /J0202+4205_X_map.mod
! wmodel: Unable to open new model file: /J0202+4205_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0202+4205_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.151 x 1.408 at -65.03 degrees (North through East)
! Clean map  min=-0.0017318  max=0.21729 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0202+4205_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.217286 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000414753 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.572637 0.572637 1.14527 2.29055 4.5811 9.1622 18.3244 36.6488 73.2976
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.217 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  523.891 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0202+4205_X_dfm.log closed on Thu May 19 22:57:51 2016