! Started logfile: /scr/pima/bg219i_uvs/J0200+0322_X_dfm.log on Thu May 19 22:57:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0200+0322_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0200+0322_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.932716 visibilities/baseline/integration-bin.
! Found source: J0200+0322
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18132 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0200+0322_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 43 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.076566Jy  sigma=22.251935
! Fit after  self-cal, rms=0.627073Jy  sigma=12.821717
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7546 mas, bmaj=1.695 mas, bpa=-3.854 degrees
! Estimated noise=0.422918 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.291994 Jy
! Component: 100  -  total flux cleaned = 0.356344 Jy
! Total flux subtracted in 100 components = 0.356344 Jy
! Clean residual min=-0.008277 max=0.020762 Jy/beam
! Clean residual mean=-0.000005 rms=0.002000 Jy/beam
! Combined flux in latest and established models = 0.356344 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.356344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081834Jy  sigma=1.579422
! Fit after  self-cal, rms=0.081827Jy  sigma=1.579284
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0207318 Jy
! Component: 100  -  total flux cleaned = 0.0296887 Jy
! Total flux subtracted in 100 components = 0.0296887 Jy
! Clean residual min=-0.005503 max=0.008580 Jy/beam
! Clean residual mean=-0.000004 rms=0.001274 Jy/beam
! Combined flux in latest and established models = 0.386032 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.386032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076772Jy  sigma=1.432247
! Fit after  self-cal, rms=0.076765Jy  sigma=1.432035
! Inverting map 
! Added new window around map position (5.8, -10.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0071624 Jy
! Component: 100  -  total flux cleaned = 0.0109139 Jy
! Total flux subtracted in 100 components = 0.0109139 Jy
! Clean residual min=-0.005175 max=0.007614 Jy/beam
! Clean residual mean=-0.000003 rms=0.001167 Jy/beam
! Combined flux in latest and established models = 0.396946 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 16 components and 0.396946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076234Jy  sigma=1.418813
! Fit after  self-cal, rms=0.076196Jy  sigma=1.417130
! Inverting map 
! Added new window around map position (-2, -5.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00639411 Jy
! Component: 100  -  total flux cleaned = 0.00847018 Jy
! Total flux subtracted in 100 components = 0.00847018 Jy
! Clean residual min=-0.005295 max=0.006549 Jy/beam
! Clean residual mean=-0.000003 rms=0.001079 Jy/beam
! Combined flux in latest and established models = 0.405416 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 27 components and 0.405416 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075817Jy  sigma=1.410062
! Fit after  self-cal, rms=0.075754Jy  sigma=1.407836
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9554 mas, bmaj=1.981 mas, bpa=-2.734 degrees
! Estimated noise=0.278703 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.3318e-06 Jy
! Component: 100  -  total flux cleaned = 0.000520726 Jy
! Component: 150  -  total flux cleaned = 0.000742565 Jy
! Component: 200  -  total flux cleaned = 0.000941341 Jy
! Total flux subtracted in 200 components = 0.000941341 Jy
! Clean residual min=-0.004299 max=0.005232 Jy/beam
! Clean residual mean=-0.000006 rms=0.001156 Jy/beam
! Combined flux in latest and established models = 0.406358 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 0.406358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075584Jy  sigma=1.403822
! Fit after  self-cal, rms=0.075585Jy  sigma=1.403663
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9554 x 1.981 at -2.734 degrees (North through East)
! Clean map  min=-0.004167  max=0.37611 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.09     KP        0.97     
!   LA        1.02     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.01     HN        1.09     KP        0.97     
!   LA        1.02     MK        1.01     NL        0.99     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.07     KP        1.00     
!   LA        1.01     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.04     KP        0.97     
!   LA        1.03     MK        1.00     NL        1.01     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.07     KP        0.98     
!   LA        1.02     MK        0.99     NL        0.98     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.09     KP        0.97     
!   LA        1.03     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.04     KP        0.97     
!   LA        1.01     MK        1.01     NL        0.98     OV        0.97     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.05     KP        0.97     
!   LA        1.05     MK        0.98     NL        0.97     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        0.96     
!   LA        1.02     MK        0.99     NL        0.98     OV        0.98     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.08     KP        0.98     
!   LA        1.03     MK        1.00     NL        0.98     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.06     KP        0.95     
!   LA        1.00     MK        1.00     NL        0.99     OV        0.99     
!   PT        0.98     SC        1.00     
! 
! 
! Fit before self-cal, rms=0.075585Jy  sigma=1.403663
! Fit after  self-cal, rms=0.075926Jy  sigma=1.383580
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9583 mas, bmaj=1.983 mas, bpa=-2.627 degrees
! Estimated noise=0.278577 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00188391 Jy
! Component: 100  -  total flux cleaned = -0.00304702 Jy
! Component: 150  -  total flux cleaned = -0.00347094 Jy
! Component: 200  -  total flux cleaned = -0.00362271 Jy
! Total flux subtracted in 200 components = -0.00362271 Jy
! Clean residual min=-0.003942 max=0.004211 Jy/beam
! Clean residual mean=-0.000004 rms=0.000985 Jy/beam
! Combined flux in latest and established models = 0.402735 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 57 components and 0.402735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075864Jy  sigma=1.382446
! Fit after  self-cal, rms=0.075888Jy  sigma=1.382312
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075888Jy  sigma=1.382312
! Fit after  self-cal, rms=0.075668Jy  sigma=1.353932
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9587 mas, bmaj=1.983 mas, bpa=-2.562 degrees
! Estimated noise=0.278934 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00257905 Jy
! Component: 100  -  total flux cleaned = -0.00371776 Jy
! Component: 150  -  total flux cleaned = -0.00383364 Jy
! Component: 200  -  total flux cleaned = -0.00383357 Jy
! Total flux subtracted in 200 components = -0.00383357 Jy
! Clean residual min=-0.002483 max=0.001991 Jy/beam
! Clean residual mean=-0.000002 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.398902 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 68 components and 0.398902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075568Jy  sigma=1.351989
! Fit after  self-cal, rms=0.075559Jy  sigma=1.351481
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108375 Jy
! Component: 100  -  total flux cleaned = -0.00114518 Jy
! Component: 150  -  total flux cleaned = -0.00111731 Jy
! Component: 200  -  total flux cleaned = -0.00102989 Jy
! Total flux subtracted in 200 components = -0.00102989 Jy
! Clean residual min=-0.002224 max=0.001996 Jy/beam
! Clean residual mean=-0.000002 rms=0.000456 Jy/beam
! Combined flux in latest and established models = 0.397872 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 81 components and 0.397872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075532Jy  sigma=1.350958
! Fit after  self-cal, rms=0.075523Jy  sigma=1.350844
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075523Jy  sigma=1.350844
! Fit after  self-cal, rms=0.075749Jy  sigma=1.350384
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9585 mas, bmaj=1.982 mas, bpa=-2.538 degrees
! Estimated noise=0.278772 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00130666 Jy
! Component: 100  -  total flux cleaned = -0.00166829 Jy
! Component: 150  -  total flux cleaned = -0.00162444 Jy
! Component: 200  -  total flux cleaned = -0.00160523 Jy
! Total flux subtracted in 200 components = -0.00160523 Jy
! Clean residual min=-0.002092 max=0.001943 Jy/beam
! Clean residual mean=-0.000001 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.396266 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.396266 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075722Jy  sigma=1.349839
! Fit after  self-cal, rms=0.075717Jy  sigma=1.349722
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000520193 Jy
! Component: 100  -  total flux cleaned = -0.000564943 Jy
! Component: 150  -  total flux cleaned = -0.000584339 Jy
! Component: 200  -  total flux cleaned = -0.000566479 Jy
! Total flux subtracted in 200 components = -0.000566479 Jy
! Clean residual min=-0.001957 max=0.001940 Jy/beam
! Clean residual mean=-0.000001 rms=0.000421 Jy/beam
! Combined flux in latest and established models = 0.3957 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 83 components and 0.3957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075706Jy  sigma=1.349476
! Fit after  self-cal, rms=0.075702Jy  sigma=1.349449
! Inverting map 
! Added new window around map position (-26.4, 19.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157916 Jy
! Component: 100  -  total flux cleaned = 0.00170772 Jy
! Component: 150  -  total flux cleaned = 0.00168543 Jy
! Component: 200  -  total flux cleaned = 0.00166427 Jy
! Total flux subtracted in 200 components = 0.00166427 Jy
! Clean residual min=-0.001898 max=0.001664 Jy/beam
! Clean residual mean=-0.000001 rms=0.000400 Jy/beam
! Combined flux in latest and established models = 0.397364 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 95 components and 0.397364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075663Jy  sigma=1.348665
! Fit after  self-cal, rms=0.075660Jy  sigma=1.348615
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075660Jy  sigma=1.348615
! Fit after  self-cal, rms=0.075748Jy  sigma=1.348441
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.207 mas, bmaj=3.162 mas, bpa=2.985 degrees
! Estimated noise=0.347096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00024974 Jy
! Component: 100  -  total flux cleaned = -0.000273996 Jy
! Component: 150  -  total flux cleaned = -0.000329946 Jy
! Component: 200  -  total flux cleaned = -0.000378442 Jy
! Total flux subtracted in 200 components = -0.000378442 Jy
! Clean residual min=-0.001910 max=0.001861 Jy/beam
! Clean residual mean=-0.000002 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.396986 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 110 components and 0.396986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075743Jy  sigma=1.348353
! Fit after  self-cal, rms=0.075744Jy  sigma=1.348331
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.27904e-05 Jy
! Component: 100  -  total flux cleaned = -1.76853e-05 Jy
! Component: 150  -  total flux cleaned = -8.45619e-05 Jy
! Component: 200  -  total flux cleaned = -0.000120708 Jy
! Total flux subtracted in 200 components = -0.000120708 Jy
! Clean residual min=-0.001912 max=0.001865 Jy/beam
! Clean residual mean=-0.000002 rms=0.000484 Jy/beam
! Combined flux in latest and established models = 0.396865 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 118 components and 0.396865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075744Jy  sigma=1.348347
! Fit after  self-cal, rms=0.075743Jy  sigma=1.348339
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9583 mas, bmaj=1.982 mas, bpa=-2.523 degrees
! Estimated noise=0.278626 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9583 x 1.982 at -2.523 degrees (North through East)
! Clean map  min=-0.0025726  max=0.37771 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7561 mas, bmaj=1.693 mas, bpa=-3.658 degrees
! Estimated noise=0.424112 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.292777 Jy
! Component: 100  -  total flux cleaned = 0.357205 Jy
! Component: 150  -  total flux cleaned = 0.377278 Jy
! Component: 200  -  total flux cleaned = 0.385894 Jy
! Total flux subtracted in 200 components = 0.385894 Jy
! Clean residual min=-0.002611 max=0.003686 Jy/beam
! Clean residual mean=-0.000001 rms=0.000696 Jy/beam
! Combined flux in latest and established models = 0.385894 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.385894 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9583 mas, bmaj=1.982 mas, bpa=-2.523 degrees
! Estimated noise=0.278626 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0048142 Jy
! Component: 100  -  total flux cleaned = 0.00672927 Jy
! Component: 150  -  total flux cleaned = 0.0076965 Jy
! Component: 200  -  total flux cleaned = 0.00834558 Jy
! Total flux subtracted in 200 components = 0.00834558 Jy
! Clean residual min=-0.001916 max=0.001965 Jy/beam
! Clean residual mean=-0.000002 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.39424 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 29 components and 0.39424 Jy
! Inverting map 
! Added new window around map position (2.4, -3.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163834 Jy
! Component: 100  -  total flux cleaned = 0.00232297 Jy
! Component: 150  -  total flux cleaned = 0.00303305 Jy
! Component: 200  -  total flux cleaned = 0.00366392 Jy
! Total flux subtracted in 200 components = 0.00366392 Jy
! Clean residual min=-0.001690 max=0.001599 Jy/beam
! Clean residual mean=-0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.397903 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 42 components and 0.397903 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.207 mas, bmaj=3.162 mas, bpa=2.985 degrees
! Estimated noise=0.347096 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.83618e-05 Jy
! Component: 100  -  total flux cleaned = 0.000244817 Jy
! Component: 150  -  total flux cleaned = 0.000402015 Jy
! Component: 200  -  total flux cleaned = 0.00061799 Jy
! Total flux subtracted in 200 components = 0.00061799 Jy
! Clean residual min=-0.001779 max=0.001709 Jy/beam
! Clean residual mean=-0.000002 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.398521 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000141172 Jy
! Component: 100  -  total flux cleaned = 0.000266925 Jy
! Component: 150  -  total flux cleaned = 0.000381463 Jy
! Component: 200  -  total flux cleaned = 0.000502677 Jy
! Total flux subtracted in 200 components = 0.000502677 Jy
! Clean residual min=-0.001732 max=0.001676 Jy/beam
! Clean residual mean=-0.000002 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.399024 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 77 components and 0.399024 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9583 mas, bmaj=1.982 mas, bpa=-2.523 degrees
! Estimated noise=0.278626 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000270255 Jy
! Component: 100  -  total flux cleaned = 0.000329575 Jy
! Component: 150  -  total flux cleaned = 0.000412242 Jy
! Component: 200  -  total flux cleaned = 0.000489689 Jy
! Total flux subtracted in 200 components = 0.000489689 Jy
! Clean residual min=-0.001611 max=0.001512 Jy/beam
! Clean residual mean=-0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.399514 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 91 components and 0.399514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075723Jy  sigma=1.347539
! Fit after  self-cal, rms=0.075710Jy  sigma=1.347383
wmodel /J0200+0322_X_map.mod
! wmodel: Unable to open new model file: /J0200+0322_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0200+0322_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9583 x 1.982 at -2.523 degrees (North through East)
! Clean map  min=-0.0024591  max=0.37875 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0200+0322_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.378748 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000359971 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.285127 0.285127 0.570255 1.14051 2.28102 4.56204 9.12407 18.2481 36.4963 72.9926
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.378 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1052.16 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0200+0322_X_dfm.log closed on Thu May 19 22:57:35 2016