! Started logfile: /scr/pima/bg219i_uvs/J0152-2942_X_dfm.log on Thu May 19 22:57:24 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0152-2942_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0152-2942_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.891188 visibilities/baseline/integration-bin.
! Found source: J0152-2942
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 27912 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0152-2942_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.013247Jy  sigma=19.102988
! Fit after  self-cal, rms=0.884934Jy  sigma=16.609112
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5841 mas, bmaj=1.602 mas, bpa=-6.466 degrees
! Estimated noise=0.493465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.081749 Jy
! Component: 100  -  total flux cleaned = 0.110866 Jy
! Total flux subtracted in 100 components = 0.110866 Jy
! Clean residual min=-0.006931 max=0.019477 Jy/beam
! Clean residual mean=-0.000028 rms=0.001827 Jy/beam
! Combined flux in latest and established models = 0.110866 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.110866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.093878Jy  sigma=1.613092
! Fit after  self-cal, rms=0.093639Jy  sigma=1.609158
! Inverting map 
! Added new window around map position (1.8, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0193124 Jy
! Component: 100  -  total flux cleaned = 0.0312927 Jy
! Total flux subtracted in 100 components = 0.0312927 Jy
! Clean residual min=-0.004972 max=0.008034 Jy/beam
! Clean residual mean=-0.000016 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.142159 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 0.142159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087572Jy  sigma=1.468164
! Fit after  self-cal, rms=0.087277Jy  sigma=1.461867
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00901084 Jy
! Component: 100  -  total flux cleaned = 0.0152577 Jy
! Total flux subtracted in 100 components = 0.0152577 Jy
! Clean residual min=-0.004045 max=0.006441 Jy/beam
! Clean residual mean=-0.000011 rms=0.001007 Jy/beam
! Combined flux in latest and established models = 0.157417 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.157417 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085559Jy  sigma=1.419710
! Fit after  self-cal, rms=0.085490Jy  sigma=1.418224
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7909 mas, bmaj=2.062 mas, bpa=-4.478 degrees
! Estimated noise=0.237569 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, 0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101949 Jy
! Component: 100  -  total flux cleaned = 0.0159799 Jy
! Component: 150  -  total flux cleaned = 0.0196179 Jy
! Component: 200  -  total flux cleaned = 0.0219421 Jy
! Total flux subtracted in 200 components = 0.0219421 Jy
! Clean residual min=-0.002559 max=0.004539 Jy/beam
! Clean residual mean=-0.000005 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.179359 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 53 components and 0.179359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084310Jy  sigma=1.389908
! Fit after  self-cal, rms=0.084230Jy  sigma=1.387596
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7909 x 2.062 at -4.478 degrees (North through East)
! Clean map  min=-0.0022012  max=0.10969 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.17     KP        0.96     
!   LA        0.97     MK        1.07     NL        0.98     OV        0.99     
!   PT        0.99     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.15     KP        0.93     
!   LA        0.95     MK        0.97     NL        1.00     OV        0.96     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.00     HN        1.12     KP        0.97     
!   LA        0.99     MK        0.94     NL        0.97     OV        0.97     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.20     KP        0.95     
!   LA        0.96     MK        0.96     NL        1.03     OV        0.98     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        1.17     KP        0.96     
!   LA        1.00     MK        0.94     NL        0.97     OV        1.00     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.11     KP        0.95     
!   LA        0.94     MK        0.97     NL        1.02     OV        0.99     
!   PT        1.01     SC        1.01     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.18     KP        0.98     
!   LA        0.98     MK        0.96     NL        1.00     OV        0.98     
!   PT        1.02     SC        0.94     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.18     KP        0.98     
!   LA        0.98     MK        0.91     NL        1.03     OV        0.95     
!   PT        1.01     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.12     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.02     OV        0.99     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.08     HN        1.17     KP        0.96     
!   LA        0.99     MK        0.92     NL        0.98     OV        0.96     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.13     KP        0.97     
!   LA        0.98     MK        0.93     NL        1.00     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.084230Jy  sigma=1.387596
! Fit after  self-cal, rms=0.087992Jy  sigma=1.381242
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7875 mas, bmaj=2.042 mas, bpa=-4.447 degrees
! Estimated noise=0.235203 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100807 Jy
! Component: 100  -  total flux cleaned = 0.000954352 Jy
! Component: 150  -  total flux cleaned = 0.000865691 Jy
! Component: 200  -  total flux cleaned = 0.000788651 Jy
! Total flux subtracted in 200 components = 0.000788651 Jy
! Clean residual min=-0.001856 max=0.001913 Jy/beam
! Clean residual mean=0.000002 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.180148 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 67 components and 0.180148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087923Jy  sigma=1.379945
! Fit after  self-cal, rms=0.088017Jy  sigma=1.379677
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088017Jy  sigma=1.379677
! Fit after  self-cal, rms=0.089200Jy  sigma=1.376262
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7856 mas, bmaj=2.038 mas, bpa=-4.499 degrees
! Estimated noise=0.234837 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000699488 Jy
! Component: 100  -  total flux cleaned = 0.000666879 Jy
! Component: 150  -  total flux cleaned = 0.000635856 Jy
! Component: 200  -  total flux cleaned = 0.000636704 Jy
! Total flux subtracted in 200 components = 0.000636704 Jy
! Clean residual min=-0.001498 max=0.001510 Jy/beam
! Clean residual mean=0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.180784 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 74 components and 0.180784 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089172Jy  sigma=1.375694
! Fit after  self-cal, rms=0.089197Jy  sigma=1.375593
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185501 Jy
! Component: 100  -  total flux cleaned = 0.000103188 Jy
! Component: 150  -  total flux cleaned = 0.000103612 Jy
! Component: 200  -  total flux cleaned = 8.05187e-05 Jy
! Total flux subtracted in 200 components = 8.05187e-05 Jy
! Clean residual min=-0.001511 max=0.001446 Jy/beam
! Clean residual mean=0.000002 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.180865 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 76 components and 0.180865 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089179Jy  sigma=1.375291
! Fit after  self-cal, rms=0.089176Jy  sigma=1.375264
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089176Jy  sigma=1.375264
! Fit after  self-cal, rms=0.089994Jy  sigma=1.374108
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7831 mas, bmaj=2.033 mas, bpa=-4.577 degrees
! Estimated noise=0.233887 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.52741e-05 Jy
! Component: 100  -  total flux cleaned = -1.48397e-05 Jy
! Component: 150  -  total flux cleaned = -3.82135e-05 Jy
! Component: 200  -  total flux cleaned = -5.93439e-05 Jy
! Total flux subtracted in 200 components = -5.93439e-05 Jy
! Clean residual min=-0.001463 max=0.001391 Jy/beam
! Clean residual mean=0.000002 rms=0.000340 Jy/beam
! Combined flux in latest and established models = 0.180805 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.180805 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089978Jy  sigma=1.373846
! Fit after  self-cal, rms=0.089980Jy  sigma=1.373788
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.06292e-05 Jy
! Component: 100  -  total flux cleaned = -1.0673e-05 Jy
! Component: 150  -  total flux cleaned = -2.91024e-05 Jy
! Component: 200  -  total flux cleaned = -2.89636e-05 Jy
! Total flux subtracted in 200 components = -2.89636e-05 Jy
! Clean residual min=-0.001484 max=0.001395 Jy/beam
! Clean residual mean=0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.180776 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 82 components and 0.180776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089971Jy  sigma=1.373621
! Fit after  self-cal, rms=0.089968Jy  sigma=1.373608
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089968Jy  sigma=1.373608
! Fit after  self-cal, rms=0.090019Jy  sigma=1.373569
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.156 mas, bmaj=5.609 mas, bpa=-0.4422 degrees
! Estimated noise=0.307198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000282114 Jy
! Component: 100  -  total flux cleaned = 0.000254036 Jy
! Component: 150  -  total flux cleaned = 0.000242067 Jy
! Component: 200  -  total flux cleaned = 0.000219984 Jy
! Total flux subtracted in 200 components = 0.000219984 Jy
! Clean residual min=-0.001571 max=0.001616 Jy/beam
! Clean residual mean=0.000005 rms=0.000420 Jy/beam
! Combined flux in latest and established models = 0.180996 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 87 components and 0.180996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090015Jy  sigma=1.373519
! Fit after  self-cal, rms=0.090014Jy  sigma=1.373503
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115963 Jy
! Component: 100  -  total flux cleaned = 0.000105738 Jy
! Component: 150  -  total flux cleaned = 8.68482e-05 Jy
! Component: 200  -  total flux cleaned = 7.82273e-05 Jy
! Total flux subtracted in 200 components = 7.82273e-05 Jy
! Clean residual min=-0.001586 max=0.001618 Jy/beam
! Clean residual mean=0.000005 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.181075 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 92 components and 0.181075 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090012Jy  sigma=1.373506
! Fit after  self-cal, rms=0.090009Jy  sigma=1.373502
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7814 mas, bmaj=2.03 mas, bpa=-4.618 degrees
! Estimated noise=0.23321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7814 x 2.03 at -4.618 degrees (North through East)
! Clean map  min=-0.0013864  max=0.10884 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5761 mas, bmaj=1.588 mas, bpa=-6.285 degrees
! Estimated noise=0.476864 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0791041 Jy
! Component: 100  -  total flux cleaned = 0.109929 Jy
! Component: 150  -  total flux cleaned = 0.12957 Jy
! Component: 200  -  total flux cleaned = 0.142433 Jy
! Total flux subtracted in 200 components = 0.142433 Jy
! Clean residual min=-0.004178 max=0.006992 Jy/beam
! Clean residual mean=-0.000014 rms=0.001072 Jy/beam
! Combined flux in latest and established models = 0.142433 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.142433 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7814 mas, bmaj=2.03 mas, bpa=-4.618 degrees
! Estimated noise=0.23321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155672 Jy
! Component: 100  -  total flux cleaned = 0.0243883 Jy
! Component: 150  -  total flux cleaned = 0.0296866 Jy
! Component: 200  -  total flux cleaned = 0.0330304 Jy
! Total flux subtracted in 200 components = 0.0330304 Jy
! Clean residual min=-0.001764 max=0.002569 Jy/beam
! Clean residual mean=-0.000003 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.175463 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 39 components and 0.175463 Jy
! Inverting map 
! Added new window around map position (-0.8, -1.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00251995 Jy
! Component: 100  -  total flux cleaned = 0.00406525 Jy
! Component: 150  -  total flux cleaned = 0.00455695 Jy
! Component: 200  -  total flux cleaned = 0.0047355 Jy
! Total flux subtracted in 200 components = 0.0047355 Jy
! Clean residual min=-0.001623 max=0.001810 Jy/beam
! Clean residual mean=0.000001 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.180199 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.180199 Jy
! Inverting map 
! Added new window around map position (3, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121359 Jy
! Component: 100  -  total flux cleaned = 0.00135007 Jy
! Component: 150  -  total flux cleaned = 0.00138057 Jy
! Component: 200  -  total flux cleaned = 0.00140867 Jy
! Total flux subtracted in 200 components = 0.00140867 Jy
! Clean residual min=-0.001584 max=0.001277 Jy/beam
! Clean residual mean=0.000002 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.181607 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 65 components and 0.181607 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.156 mas, bmaj=5.609 mas, bpa=-0.4422 degrees
! Estimated noise=0.307198 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00041663 Jy
! Component: 100  -  total flux cleaned = 0.000416817 Jy
! Component: 150  -  total flux cleaned = 0.000415918 Jy
! Component: 200  -  total flux cleaned = 0.00041435 Jy
! Total flux subtracted in 200 components = 0.00041435 Jy
! Clean residual min=-0.001542 max=0.001403 Jy/beam
! Clean residual mean=0.000005 rms=0.000396 Jy/beam
! Combined flux in latest and established models = 0.182022 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.0735e-05 Jy
! Component: 100  -  total flux cleaned = -1.97416e-05 Jy
! Component: 150  -  total flux cleaned = -3.69263e-05 Jy
! Component: 200  -  total flux cleaned = -4.5082e-05 Jy
! Total flux subtracted in 200 components = -4.5082e-05 Jy
! Clean residual min=-0.001521 max=0.001410 Jy/beam
! Clean residual mean=0.000006 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.181977 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 82 components and 0.181977 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7814 mas, bmaj=2.03 mas, bpa=-4.618 degrees
! Estimated noise=0.23321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.77251e-05 Jy
! Component: 100  -  total flux cleaned = -0.000109918 Jy
! Component: 150  -  total flux cleaned = -0.000130556 Jy
! Component: 200  -  total flux cleaned = -0.000187746 Jy
! Total flux subtracted in 200 components = -0.000187746 Jy
! Clean residual min=-0.001536 max=0.001218 Jy/beam
! Clean residual mean=0.000002 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.181789 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 100 components and 0.181789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.089980Jy  sigma=1.372770
! Fit after  self-cal, rms=0.089974Jy  sigma=1.372592
wmodel /J0152-2942_X_map.mod
! wmodel: Unable to open new model file: /J0152-2942_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0152-2942_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7814 x 2.03 at -4.618 degrees (North through East)
! Clean map  min=-0.0014585  max=0.10716 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0152-2942_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.107155 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000311381 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.871764 0.871764 1.74353 3.48706 6.97412 13.9482 27.8965 55.7929
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  344.129 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0152-2942_X_dfm.log closed on Thu May 19 22:57:28 2016