! Started logfile: /scr/pima/bg219i_uvs/J0151-3435_X_dfm.log on Thu May 19 22:57:16 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0151-3435_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0151-3435_X_uva.fits
! AN table 1: 52 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.726496 visibilities/baseline/integration-bin.
! Found source: J0151-3435
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20400 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0151-3435_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 88 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016962Jy  sigma=18.582631
! Fit after  self-cal, rms=0.862905Jy  sigma=15.665861
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6487 mas, bmaj=1.579 mas, bpa=0.9835 degrees
! Estimated noise=0.611667 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10461 Jy
! Component: 100  -  total flux cleaned = 0.132493 Jy
! Total flux subtracted in 100 components = 0.132493 Jy
! Clean residual min=-0.007290 max=0.012409 Jy/beam
! Clean residual mean=0.000004 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 0.132493 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.132493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087063Jy  sigma=1.445683
! Fit after  self-cal, rms=0.086761Jy  sigma=1.442268
! Inverting map 
! Added new window around map position (-0.8, -2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0125722 Jy
! Component: 100  -  total flux cleaned = 0.0192585 Jy
! Total flux subtracted in 100 components = 0.0192585 Jy
! Clean residual min=-0.005715 max=0.006657 Jy/beam
! Clean residual mean=0.000001 rms=0.001231 Jy/beam
! Combined flux in latest and established models = 0.151751 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.151751 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084777Jy  sigma=1.391132
! Fit after  self-cal, rms=0.084747Jy  sigma=1.390014
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9096 mas, bmaj=2.193 mas, bpa=3.858 degrees
! Estimated noise=0.292208 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00662175 Jy
! Component: 100  -  total flux cleaned = 0.0100199 Jy
! Component: 150  -  total flux cleaned = 0.0107451 Jy
! Component: 200  -  total flux cleaned = 0.0108998 Jy
! Total flux subtracted in 200 components = 0.0108998 Jy
! Clean residual min=-0.003292 max=0.005347 Jy/beam
! Clean residual mean=-0.000002 rms=0.000789 Jy/beam
! Combined flux in latest and established models = 0.162651 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 37 components and 0.162651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084211Jy  sigma=1.379416
! Fit after  self-cal, rms=0.084186Jy  sigma=1.378365
! Inverting map 
! Added new window around map position (9.2, -23.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00431218 Jy
! Component: 100  -  total flux cleaned = 0.00631837 Jy
! Component: 150  -  total flux cleaned = 0.00656768 Jy
! Component: 200  -  total flux cleaned = 0.00651314 Jy
! Total flux subtracted in 200 components = 0.00651314 Jy
! Clean residual min=-0.003033 max=0.003252 Jy/beam
! Clean residual mean=-0.000003 rms=0.000671 Jy/beam
! Combined flux in latest and established models = 0.169164 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 58 components and 0.169164 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083929Jy  sigma=1.374238
! Fit after  self-cal, rms=0.083930Jy  sigma=1.373816
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9096 x 2.193 at 3.858 degrees (North through East)
! Clean map  min=-0.0029557  max=0.13222 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.14     KP        0.96     
!   LA        1.00     MK        1.03     NL        1.05     OV        0.93     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.05     HN        1.12     KP        1.00     
!   LA        1.02     MK        1.02     NL        1.03     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        1.09     KP        0.96     
!   LA        1.04     MK        1.05     NL        1.07     OV        0.96     
!   PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.10     KP        0.98     
!   LA        1.01     MK        1.04     NL        1.01     OV        0.95     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.13     KP        0.98     
!   LA        1.05     MK        0.96     NL        0.99     OV        0.98     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.17     KP        0.98     
!   LA        1.00     MK        1.00     NL        1.02     OV        0.94     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        1.10     KP        0.95     
!   LA        1.07     MK        0.84     NL        0.98     OV        0.96     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.11     KP        0.98     
!   LA        0.99     MK        0.98     NL        1.05     OV        0.97     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.18     KP        1.00     
!   LA        0.99     MK        1.05     NL        1.02     OV        0.97     
!   PT        0.97     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.083930Jy  sigma=1.373816
! Fit after  self-cal, rms=0.086561Jy  sigma=1.369141
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9102 mas, bmaj=2.191 mas, bpa=4.107 degrees
! Estimated noise=0.293226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000720716 Jy
! Component: 100  -  total flux cleaned = -0.000918896 Jy
! Component: 150  -  total flux cleaned = -0.000981419 Jy
! Component: 200  -  total flux cleaned = -0.00103431 Jy
! Total flux subtracted in 200 components = -0.00103431 Jy
! Clean residual min=-0.002382 max=0.002416 Jy/beam
! Clean residual mean=-0.000001 rms=0.000523 Jy/beam
! Combined flux in latest and established models = 0.16813 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 79 components and 0.16813 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086530Jy  sigma=1.368552
! Fit after  self-cal, rms=0.086585Jy  sigma=1.368436
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086585Jy  sigma=1.368436
! Fit after  self-cal, rms=0.087441Jy  sigma=1.367244
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9092 mas, bmaj=2.192 mas, bpa=4.163 degrees
! Estimated noise=0.293756 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000646746 Jy
! Component: 100  -  total flux cleaned = -0.000894495 Jy
! Component: 150  -  total flux cleaned = -0.00109817 Jy
! Component: 200  -  total flux cleaned = -0.00116379 Jy
! Total flux subtracted in 200 components = -0.00116379 Jy
! Clean residual min=-0.002195 max=0.002242 Jy/beam
! Clean residual mean=-0.000000 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.166966 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 94 components and 0.166966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087424Jy  sigma=1.366812
! Fit after  self-cal, rms=0.087446Jy  sigma=1.366735
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (21.8, -26.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018457 Jy
! Component: 100  -  total flux cleaned = 0.00206337 Jy
! Component: 150  -  total flux cleaned = 0.00216737 Jy
! Component: 200  -  total flux cleaned = 0.00212354 Jy
! Total flux subtracted in 200 components = 0.00212354 Jy
! Clean residual min=-0.002070 max=0.001894 Jy/beam
! Clean residual mean=-0.000000 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.16909 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 110 components and 0.16909 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087401Jy  sigma=1.365998
! Fit after  self-cal, rms=0.087400Jy  sigma=1.365918
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087400Jy  sigma=1.365918
! Fit after  self-cal, rms=0.087457Jy  sigma=1.365498
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9079 mas, bmaj=2.19 mas, bpa=4.142 degrees
! Estimated noise=0.293647 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00013218 Jy
! Component: 100  -  total flux cleaned = 0.000109454 Jy
! Component: 150  -  total flux cleaned = 0.000129715 Jy
! Component: 200  -  total flux cleaned = 7.27537e-05 Jy
! Total flux subtracted in 200 components = 7.27537e-05 Jy
! Clean residual min=-0.002058 max=0.001806 Jy/beam
! Clean residual mean=0.000000 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.169162 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 123 components and 0.169162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087446Jy  sigma=1.365278
! Fit after  self-cal, rms=0.087451Jy  sigma=1.365265
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.53517e-05 Jy
! Component: 100  -  total flux cleaned = -3.27229e-05 Jy
! Component: 150  -  total flux cleaned = -3.27818e-05 Jy
! Component: 200  -  total flux cleaned = -3.30869e-05 Jy
! Total flux subtracted in 200 components = -3.30869e-05 Jy
! Clean residual min=-0.002033 max=0.001804 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.169129 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 128 components and 0.169129 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087444Jy  sigma=1.365159
! Fit after  self-cal, rms=0.087444Jy  sigma=1.365154
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087444Jy  sigma=1.365154
! Fit after  self-cal, rms=0.087511Jy  sigma=1.365127
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.41 mas, bmaj=7.872 mas, bpa=5.982 degrees
! Estimated noise=0.35388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.95578e-05 Jy
! Component: 100  -  total flux cleaned = -2.65609e-05 Jy
! Component: 150  -  total flux cleaned = -1.31859e-05 Jy
! Component: 200  -  total flux cleaned = -1.23442e-05 Jy
! Total flux subtracted in 200 components = -1.23442e-05 Jy
! Clean residual min=-0.002074 max=0.001748 Jy/beam
! Clean residual mean=0.000001 rms=0.000495 Jy/beam
! Combined flux in latest and established models = 0.169117 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 136 components and 0.169117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087508Jy  sigma=1.365069
! Fit after  self-cal, rms=0.087510Jy  sigma=1.365063
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.98769e-05 Jy
! Component: 100  -  total flux cleaned = -2.89433e-05 Jy
! Component: 150  -  total flux cleaned = -2.89409e-05 Jy
! Component: 200  -  total flux cleaned = -3.89902e-05 Jy
! Total flux subtracted in 200 components = -3.89902e-05 Jy
! Clean residual min=-0.002056 max=0.001761 Jy/beam
! Clean residual mean=0.000001 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.169078 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 141 components and 0.169078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087508Jy  sigma=1.365042
! Fit after  self-cal, rms=0.087508Jy  sigma=1.365041
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9074 mas, bmaj=2.191 mas, bpa=4.15 degrees
! Estimated noise=0.293727 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9074 x 2.191 at 4.15 degrees (North through East)
! Clean map  min=-0.0019005  max=0.13322 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6465 mas, bmaj=1.577 mas, bpa=1.304 degrees
! Estimated noise=0.61624 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105296 Jy
! Component: 100  -  total flux cleaned = 0.133565 Jy
! Component: 150  -  total flux cleaned = 0.14608 Jy
! Component: 200  -  total flux cleaned = 0.151268 Jy
! Total flux subtracted in 200 components = 0.151268 Jy
! Clean residual min=-0.004661 max=0.005128 Jy/beam
! Clean residual mean=0.000002 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.151268 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.151268 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9074 mas, bmaj=2.191 mas, bpa=4.15 degrees
! Estimated noise=0.293727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00634284 Jy
! Component: 100  -  total flux cleaned = 0.0101044 Jy
! Component: 150  -  total flux cleaned = 0.012779 Jy
! Component: 200  -  total flux cleaned = 0.0147599 Jy
! Total flux subtracted in 200 components = 0.0147599 Jy
! Clean residual min=-0.002105 max=0.002053 Jy/beam
! Clean residual mean=0.000001 rms=0.000480 Jy/beam
! Combined flux in latest and established models = 0.166028 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 56 components and 0.166028 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.41 mas, bmaj=7.872 mas, bpa=5.982 degrees
! Estimated noise=0.35388 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166862 Jy
! Component: 100  -  total flux cleaned = 0.00237344 Jy
! Component: 150  -  total flux cleaned = 0.00271163 Jy
! Component: 200  -  total flux cleaned = 0.00298518 Jy
! Total flux subtracted in 200 components = 0.00298518 Jy
! Clean residual min=-0.002205 max=0.001674 Jy/beam
! Clean residual mean=0.000001 rms=0.000510 Jy/beam
! Combined flux in latest and established models = 0.169014 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.17035e-05 Jy
! Component: 100  -  total flux cleaned = 0.000151643 Jy
! Component: 150  -  total flux cleaned = 0.000225349 Jy
! Component: 200  -  total flux cleaned = 0.000276078 Jy
! Total flux subtracted in 200 components = 0.000276078 Jy
! Clean residual min=-0.002154 max=0.001693 Jy/beam
! Clean residual mean=0.000001 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.16929 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.16929 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9074 mas, bmaj=2.191 mas, bpa=4.15 degrees
! Estimated noise=0.293727 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00031936 Jy
! Component: 100  -  total flux cleaned = -0.000243917 Jy
! Component: 150  -  total flux cleaned = -0.00014433 Jy
! Component: 200  -  total flux cleaned = -0.000175123 Jy
! Total flux subtracted in 200 components = -0.000175123 Jy
! Clean residual min=-0.001935 max=0.001802 Jy/beam
! Clean residual mean=0.000001 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.169115 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 91 components and 0.169115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087561Jy  sigma=1.365728
! Fit after  self-cal, rms=0.087551Jy  sigma=1.365655
wmodel /J0151-3435_X_map.mod
! wmodel: Unable to open new model file: /J0151-3435_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0151-3435_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9074 x 2.191 at 4.15 degrees (North through East)
! Clean map  min=-0.0018812  max=0.13454 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0151-3435_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.134545 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000429626 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.957955 0.957955 1.91591 3.83182 7.66364 15.3273 30.6546 61.3091
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0012 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.134 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  313.166 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0151-3435_X_dfm.log closed on Thu May 19 22:57:19 2016