! Started logfile: /scr/pima/bg219i_uvs/J0141-0928_X_dfm.log on Thu May 19 22:56:43 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0141-0928_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0141-0928_X_uva.fits
! AN table 1: 14 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.857143 visibilities/baseline/integration-bin.
! Found source: J0141-0928
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 6480 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0141-0928_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.075218Jy  sigma=25.599902
! Fit after  self-cal, rms=0.625282Jy  sigma=14.975367
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7097 mas, bmaj=1.692 mas, bpa=-2.353 degrees
! Estimated noise=0.643917 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.271384 Jy
! Component: 100  -  total flux cleaned = 0.36384 Jy
! Total flux subtracted in 100 components = 0.36384 Jy
! Clean residual min=-0.019165 max=0.042476 Jy/beam
! Clean residual mean=0.000053 rms=0.004298 Jy/beam
! Combined flux in latest and established models = 0.36384 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.36384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.120980Jy  sigma=2.766710
! Fit after  self-cal, rms=0.120879Jy  sigma=2.764592
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0475366 Jy
! Component: 100  -  total flux cleaned = 0.0728666 Jy
! Total flux subtracted in 100 components = 0.0728666 Jy
! Clean residual min=-0.012593 max=0.026720 Jy/beam
! Clean residual mean=0.000028 rms=0.002685 Jy/beam
! Combined flux in latest and established models = 0.436707 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 9 components and 0.436707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091326Jy  sigma=2.051111
! Fit after  self-cal, rms=0.091280Jy  sigma=2.049793
! Inverting map 
! Added new window around map position (-2, -0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0257142 Jy
! Component: 100  -  total flux cleaned = 0.040744 Jy
! Total flux subtracted in 100 components = 0.040744 Jy
! Clean residual min=-0.008994 max=0.010064 Jy/beam
! Clean residual mean=0.000016 rms=0.001895 Jy/beam
! Combined flux in latest and established models = 0.477451 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 23 components and 0.477451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081127Jy  sigma=1.795146
! Fit after  self-cal, rms=0.080539Jy  sigma=1.781108
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0123125 Jy
! Component: 100  -  total flux cleaned = 0.0211367 Jy
! Total flux subtracted in 100 components = 0.0211367 Jy
! Clean residual min=-0.006788 max=0.008074 Jy/beam
! Clean residual mean=0.000009 rms=0.001563 Jy/beam
! Combined flux in latest and established models = 0.498587 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 26 components and 0.498587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077768Jy  sigma=1.709603
! Fit after  self-cal, rms=0.077659Jy  sigma=1.707033
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8665 mas, bmaj=1.975 mas, bpa=-1.173 degrees
! Estimated noise=0.445601 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00900305 Jy
! Component: 100  -  total flux cleaned = 0.0145459 Jy
! Component: 150  -  total flux cleaned = 0.018164 Jy
! Component: 200  -  total flux cleaned = 0.0206097 Jy
! Total flux subtracted in 200 components = 0.0206097 Jy
! Clean residual min=-0.005775 max=0.006014 Jy/beam
! Clean residual mean=0.000002 rms=0.001462 Jy/beam
! Combined flux in latest and established models = 0.519197 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 36 components and 0.519197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076595Jy  sigma=1.675717
! Fit after  self-cal, rms=0.076547Jy  sigma=1.674660
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8665 x 1.975 at -1.173 degrees (North through East)
! Clean map  min=-0.0055668  max=0.37138 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.07     HN        0.99     KP        0.99     
!   LA        1.00     MK        0.98     NL        1.02     OV        1.00     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.01     KP        0.97     
!   LA        1.01     MK        0.98     NL        0.99     OV        0.98     
!   PT        0.98     SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        0.95     KP        1.00     
!   LA        0.99     MK        0.98     NL        1.02     OV        0.99     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        0.96     KP        0.98     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.09     HN        0.97     KP        0.98     
!   LA        0.97     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        0.99     KP        1.01     
!   LA        1.00     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.95     KP        0.99     
!   LA        1.00     MK        0.97     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        0.96     KP        0.99     
!   LA        1.01     MK        0.97     NL        0.98     OV        0.98     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.06     HN        0.99     KP        0.97     
!   LA        0.98     MK        0.98     NL        1.02     OV        0.98     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.98     KP        1.01     
!   LA        1.00     MK        1.02     NL        0.98     OV        0.96     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.11     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.01     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        0.98     KP        0.98     
!   LA        0.99     MK        1.04     NL        1.02     OV        0.94     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.076547Jy  sigma=1.674660
! Fit after  self-cal, rms=0.075859Jy  sigma=1.638942
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=1.971 mas, bpa=-1.206 degrees
! Estimated noise=0.443555 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00255396 Jy
! Component: 100  -  total flux cleaned = 0.00283697 Jy
! Component: 150  -  total flux cleaned = 0.00289703 Jy
! Component: 200  -  total flux cleaned = 0.00285069 Jy
! Total flux subtracted in 200 components = 0.00285069 Jy
! Clean residual min=-0.004636 max=0.004644 Jy/beam
! Clean residual mean=-0.000005 rms=0.001066 Jy/beam
! Combined flux in latest and established models = 0.522048 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 47 components and 0.522048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075718Jy  sigma=1.635992
! Fit after  self-cal, rms=0.075720Jy  sigma=1.635539
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075720Jy  sigma=1.635539
! Fit after  self-cal, rms=0.075297Jy  sigma=1.615336
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8618 mas, bmaj=1.975 mas, bpa=-1.24 degrees
! Estimated noise=0.442776 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000410427 Jy
! Component: 100  -  total flux cleaned = 6.84977e-06 Jy
! Component: 150  -  total flux cleaned = -0.000192726 Jy
! Component: 200  -  total flux cleaned = -0.000282338 Jy
! Total flux subtracted in 200 components = -0.000282338 Jy
! Clean residual min=-0.004032 max=0.003580 Jy/beam
! Clean residual mean=0.000002 rms=0.000877 Jy/beam
! Combined flux in latest and established models = 0.521765 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 56 components and 0.521765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075224Jy  sigma=1.613494
! Fit after  self-cal, rms=0.075225Jy  sigma=1.613388
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.95418e-05 Jy
! Component: 100  -  total flux cleaned = 7.05185e-05 Jy
! Component: 150  -  total flux cleaned = 7.00042e-05 Jy
! Component: 200  -  total flux cleaned = 7.11052e-05 Jy
! Total flux subtracted in 200 components = 7.11052e-05 Jy
! Clean residual min=-0.003996 max=0.003523 Jy/beam
! Clean residual mean=0.000002 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.521837 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 60 components and 0.521837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075187Jy  sigma=1.612534
! Fit after  self-cal, rms=0.075187Jy  sigma=1.612508
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075187Jy  sigma=1.612508
! Fit after  self-cal, rms=0.075092Jy  sigma=1.612223
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8607 mas, bmaj=1.976 mas, bpa=-1.335 degrees
! Estimated noise=0.442148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.63587e-05 Jy
! Component: 100  -  total flux cleaned = -0.00010907 Jy
! Component: 150  -  total flux cleaned = -0.000107788 Jy
! Component: 200  -  total flux cleaned = -0.000107933 Jy
! Total flux subtracted in 200 components = -0.000107933 Jy
! Clean residual min=-0.003953 max=0.003456 Jy/beam
! Clean residual mean=0.000002 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.521729 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 62 components and 0.521729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075055Jy  sigma=1.611444
! Fit after  self-cal, rms=0.075053Jy  sigma=1.611410
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.57544e-05 Jy
! Component: 100  -  total flux cleaned = 5.66882e-05 Jy
! Component: 150  -  total flux cleaned = 2.93267e-05 Jy
! Component: 200  -  total flux cleaned = 2.88288e-05 Jy
! Total flux subtracted in 200 components = 2.88288e-05 Jy
! Clean residual min=-0.003926 max=0.003417 Jy/beam
! Clean residual mean=0.000002 rms=0.000858 Jy/beam
! Combined flux in latest and established models = 0.521758 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.521757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075032Jy  sigma=1.610957
! Fit after  self-cal, rms=0.075032Jy  sigma=1.610938
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075032Jy  sigma=1.610938
! Fit after  self-cal, rms=0.074950Jy  sigma=1.610801
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=3.702 mas, bpa=4.545 degrees
! Estimated noise=0.584403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000566877 Jy
! Component: 100  -  total flux cleaned = -0.000733455 Jy
! Component: 150  -  total flux cleaned = -0.000808403 Jy
! Component: 200  -  total flux cleaned = -0.000839174 Jy
! Total flux subtracted in 200 components = -0.000839174 Jy
! Clean residual min=-0.005814 max=0.004101 Jy/beam
! Clean residual mean=0.000007 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.520918 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 71 components and 0.520918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074955Jy  sigma=1.610943
! Fit after  self-cal, rms=0.074952Jy  sigma=1.610892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.58081e-05 Jy
! Component: 100  -  total flux cleaned = 4.39077e-05 Jy
! Component: 150  -  total flux cleaned = 1.65133e-05 Jy
! Component: 200  -  total flux cleaned = -6.63967e-06 Jy
! Total flux subtracted in 200 components = -6.63967e-06 Jy
! Clean residual min=-0.005801 max=0.004124 Jy/beam
! Clean residual mean=0.000007 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.520912 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 73 components and 0.520912 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074960Jy  sigma=1.611025
! Fit after  self-cal, rms=0.074959Jy  sigma=1.610995
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8598 mas, bmaj=1.977 mas, bpa=-1.407 degrees
! Estimated noise=0.441571 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8598 x 1.977 at -1.407 degrees (North through East)
! Clean map  min=-0.0037186  max=0.36722 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7056 mas, bmaj=1.697 mas, bpa=-2.402 degrees
! Estimated noise=0.637148 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.268776 Jy
! Component: 100  -  total flux cleaned = 0.362104 Jy
! Component: 150  -  total flux cleaned = 0.410805 Jy
! Component: 200  -  total flux cleaned = 0.442065 Jy
! Total flux subtracted in 200 components = 0.442065 Jy
! Clean residual min=-0.009709 max=0.017136 Jy/beam
! Clean residual mean=0.000027 rms=0.002265 Jy/beam
! Combined flux in latest and established models = 0.442064 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.442064 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8598 mas, bmaj=1.977 mas, bpa=-1.407 degrees
! Estimated noise=0.441571 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0314658 Jy
! Component: 100  -  total flux cleaned = 0.0498046 Jy
! Component: 150  -  total flux cleaned = 0.0609429 Jy
! Component: 200  -  total flux cleaned = 0.0678444 Jy
! Total flux subtracted in 200 components = 0.0678444 Jy
! Clean residual min=-0.004221 max=0.004000 Jy/beam
! Clean residual mean=0.000009 rms=0.000977 Jy/beam
! Combined flux in latest and established models = 0.509909 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 25 components and 0.509909 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.157 mas, bmaj=3.702 mas, bpa=4.545 degrees
! Estimated noise=0.584403 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00557621 Jy
! Component: 100  -  total flux cleaned = 0.00804266 Jy
! Component: 150  -  total flux cleaned = 0.00936811 Jy
! Component: 200  -  total flux cleaned = 0.0100991 Jy
! Total flux subtracted in 200 components = 0.0100991 Jy
! Clean residual min=-0.005848 max=0.004174 Jy/beam
! Clean residual mean=0.000008 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.520008 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000414473 Jy
! Component: 100  -  total flux cleaned = 0.000535456 Jy
! Component: 150  -  total flux cleaned = 0.000545178 Jy
! Component: 200  -  total flux cleaned = 0.000563936 Jy
! Total flux subtracted in 200 components = 0.000563936 Jy
! Clean residual min=-0.005813 max=0.004158 Jy/beam
! Clean residual mean=0.000007 rms=0.001253 Jy/beam
! Combined flux in latest and established models = 0.520572 Jy
! Adding 43 model components to the UV plane model.
! The established model now contains 62 components and 0.520572 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8598 mas, bmaj=1.977 mas, bpa=-1.407 degrees
! Estimated noise=0.441571 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000586235 Jy
! Component: 100  -  total flux cleaned = 0.00052673 Jy
! Component: 150  -  total flux cleaned = 0.000473438 Jy
! Component: 200  -  total flux cleaned = 0.000521196 Jy
! Total flux subtracted in 200 components = 0.000521196 Jy
! Clean residual min=-0.003836 max=0.003547 Jy/beam
! Clean residual mean=0.000003 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.521093 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 76 components and 0.521093 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074992Jy  sigma=1.611620
! Fit after  self-cal, rms=0.074987Jy  sigma=1.611492
wmodel /J0141-0928_X_map.mod
! wmodel: Unable to open new model file: /J0141-0928_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0141-0928_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8598 x 1.977 at -1.407 degrees (North through East)
! Clean map  min=-0.0036889  max=0.36764 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0141-0928_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.367639 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00086099 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.702583 0.702583 1.40517 2.81033 5.62067 11.2413 22.4827 44.9653 89.9307
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0025 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.367 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  426.995 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0141-0928_X_dfm.log closed on Thu May 19 22:56:46 2016