! Started logfile: /scr/pima/bg219i_uvs/J0141-0202_X_dfm.log on Thu May 19 22:56:36 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0141-0202_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0141-0202_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.825397 visibilities/baseline/integration-bin.
! Found source: J0141-0202
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 18720 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0141-0202_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 41 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.031087Jy  sigma=22.660378
! Fit after  self-cal, rms=0.733459Jy  sigma=16.002975
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.816 mas, bmaj=1.801 mas, bpa=4.88 degrees
! Estimated noise=0.406718 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.2053 Jy
! Component: 100  -  total flux cleaned = 0.250818 Jy
! Total flux subtracted in 100 components = 0.250818 Jy
! Clean residual min=-0.005680 max=0.015626 Jy/beam
! Clean residual mean=0.000016 rms=0.001631 Jy/beam
! Combined flux in latest and established models = 0.250818 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.250818 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073417Jy  sigma=1.534370
! Fit after  self-cal, rms=0.073416Jy  sigma=1.534231
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169091 Jy
! Component: 100  -  total flux cleaned = 0.0256147 Jy
! Total flux subtracted in 100 components = 0.0256147 Jy
! Clean residual min=-0.003736 max=0.005186 Jy/beam
! Clean residual mean=0.000007 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.276433 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 11 components and 0.276433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068656Jy  sigma=1.408875
! Fit after  self-cal, rms=0.068640Jy  sigma=1.408154
! Inverting map 
! Added new window around map position (-1, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00567705 Jy
! Component: 100  -  total flux cleaned = 0.00901823 Jy
! Total flux subtracted in 100 components = 0.00901823 Jy
! Clean residual min=-0.003379 max=0.003624 Jy/beam
! Clean residual mean=0.000004 rms=0.000793 Jy/beam
! Combined flux in latest and established models = 0.285451 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.285451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068103Jy  sigma=1.392960
! Fit after  self-cal, rms=0.068095Jy  sigma=1.392652
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.192 mas, bpa=3.827 degrees
! Estimated noise=0.247923 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293718 Jy
! Component: 100  -  total flux cleaned = 0.00436481 Jy
! Component: 150  -  total flux cleaned = 0.00496528 Jy
! Component: 200  -  total flux cleaned = 0.00511094 Jy
! Total flux subtracted in 200 components = 0.00511094 Jy
! Clean residual min=-0.002502 max=0.002723 Jy/beam
! Clean residual mean=0.000003 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.290562 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 41 components and 0.290562 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068002Jy  sigma=1.389169
! Fit after  self-cal, rms=0.068002Jy  sigma=1.389122
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.043 x 2.192 at 3.827 degrees (North through East)
! Clean map  min=-0.0023995  max=0.2693 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.02     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.03     KP        0.98     
!   LA        0.99     MK        0.99     NL        1.01     OV        0.97     
!   PT        0.99     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        0.99     KP        1.01     
!   LA        0.96     MK        1.02     NL        1.00     OV        0.97     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.03     HN        0.99     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.01     KP        1.01     
!   LA        1.00     MK        1.01     NL        0.99     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.04     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        0.99     KP        1.02     
!   LA        0.99     MK        1.01     NL        0.99     OV        0.98     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.00     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.02     OV        0.98     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.02     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        1.02     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.99     KP        1.01     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.068002Jy  sigma=1.389122
! Fit after  self-cal, rms=0.067960Jy  sigma=1.383177
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.195 mas, bpa=3.919 degrees
! Estimated noise=0.247427 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000747138 Jy
! Component: 100  -  total flux cleaned = -0.000813513 Jy
! Component: 150  -  total flux cleaned = -0.000885685 Jy
! Component: 200  -  total flux cleaned = -0.000980236 Jy
! Total flux subtracted in 200 components = -0.000980236 Jy
! Clean residual min=-0.002036 max=0.002337 Jy/beam
! Clean residual mean=0.000001 rms=0.000493 Jy/beam
! Combined flux in latest and established models = 0.289582 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 0.289582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067941Jy  sigma=1.382926
! Fit after  self-cal, rms=0.067951Jy  sigma=1.382891
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067951Jy  sigma=1.382891
! Fit after  self-cal, rms=0.067994Jy  sigma=1.376676
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.043 mas, bmaj=2.2 mas, bpa=3.996 degrees
! Estimated noise=0.247346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000287599 Jy
! Component: 100  -  total flux cleaned = -0.000361469 Jy
! Component: 150  -  total flux cleaned = -0.000409389 Jy
! Component: 200  -  total flux cleaned = -0.000438328 Jy
! Total flux subtracted in 200 components = -0.000438328 Jy
! Clean residual min=-0.001631 max=0.001720 Jy/beam
! Clean residual mean=0.000002 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.289143 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 60 components and 0.289143 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067982Jy  sigma=1.376516
! Fit after  self-cal, rms=0.067989Jy  sigma=1.376492
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (20.8, 3.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154076 Jy
! Component: 100  -  total flux cleaned = 0.0018228 Jy
! Component: 150  -  total flux cleaned = 0.00193662 Jy
! Component: 200  -  total flux cleaned = 0.00200679 Jy
! Total flux subtracted in 200 components = 0.00200679 Jy
! Clean residual min=-0.001479 max=0.001455 Jy/beam
! Clean residual mean=0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.29115 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 76 components and 0.29115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067948Jy  sigma=1.375579
! Fit after  self-cal, rms=0.067945Jy  sigma=1.375556
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067945Jy  sigma=1.375556
! Fit after  self-cal, rms=0.067921Jy  sigma=1.375480
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.044 mas, bmaj=2.201 mas, bpa=4.007 degrees
! Estimated noise=0.247071 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158504 Jy
! Component: 100  -  total flux cleaned = 0.000138029 Jy
! Component: 150  -  total flux cleaned = 0.000119183 Jy
! Component: 200  -  total flux cleaned = 0.000102457 Jy
! Total flux subtracted in 200 components = 0.000102457 Jy
! Clean residual min=-0.001476 max=0.001454 Jy/beam
! Clean residual mean=0.000001 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.291253 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.291253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067909Jy  sigma=1.375271
! Fit after  self-cal, rms=0.067909Jy  sigma=1.375266
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.93647e-05 Jy
! Component: 100  -  total flux cleaned = -3.86763e-05 Jy
! Component: 150  -  total flux cleaned = -1.20873e-05 Jy
! Component: 200  -  total flux cleaned = 1.27849e-05 Jy
! Total flux subtracted in 200 components = 1.27849e-05 Jy
! Clean residual min=-0.001472 max=0.001436 Jy/beam
! Clean residual mean=0.000001 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.291265 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 86 components and 0.291265 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067904Jy  sigma=1.375170
! Fit after  self-cal, rms=0.067903Jy  sigma=1.375169
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067903Jy  sigma=1.375169
! Fit after  self-cal, rms=0.067896Jy  sigma=1.375144
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.161 mas, bmaj=3.536 mas, bpa=-1.351 degrees
! Estimated noise=0.2941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000105592 Jy
! Component: 100  -  total flux cleaned = -0.000161105 Jy
! Component: 150  -  total flux cleaned = -0.000241267 Jy
! Component: 200  -  total flux cleaned = -0.000276447 Jy
! Total flux subtracted in 200 components = -0.000276447 Jy
! Clean residual min=-0.001413 max=0.001864 Jy/beam
! Clean residual mean=0.000002 rms=0.000438 Jy/beam
! Combined flux in latest and established models = 0.290989 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 93 components and 0.290989 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067897Jy  sigma=1.375145
! Fit after  self-cal, rms=0.067896Jy  sigma=1.375141
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-45.8, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000833039 Jy
! Component: 100  -  total flux cleaned = 0.000529267 Jy
! Component: 150  -  total flux cleaned = 0.000199842 Jy
! Component: 200  -  total flux cleaned = -7.36747e-05 Jy
! Total flux subtracted in 200 components = -7.36747e-05 Jy
! Clean residual min=-0.001273 max=0.001408 Jy/beam
! Clean residual mean=0.000001 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.290915 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 137 components and 0.290915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067868Jy  sigma=1.374307
! Fit after  self-cal, rms=0.067866Jy  sigma=1.374279
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=2.202 mas, bpa=4.001 degrees
! Estimated noise=0.246941 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 2.202 at 4.001 degrees (North through East)
! Clean map  min=-0.0012921  max=0.26907 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8164 mas, bmaj=1.808 mas, bpa=5.08 degrees
! Estimated noise=0.405936 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204848 Jy
! Component: 100  -  total flux cleaned = 0.250412 Jy
! Component: 150  -  total flux cleaned = 0.26745 Jy
! Component: 200  -  total flux cleaned = 0.276285 Jy
! Total flux subtracted in 200 components = 0.276285 Jy
! Clean residual min=-0.003396 max=0.004252 Jy/beam
! Clean residual mean=0.000005 rms=0.000774 Jy/beam
! Combined flux in latest and established models = 0.276286 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.276286 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=2.202 mas, bpa=4.001 degrees
! Estimated noise=0.246941 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624054 Jy
! Component: 100  -  total flux cleaned = 0.00902995 Jy
! Component: 150  -  total flux cleaned = 0.0107265 Jy
! Component: 200  -  total flux cleaned = 0.0115171 Jy
! Total flux subtracted in 200 components = 0.0115171 Jy
! Clean residual min=-0.001749 max=0.001483 Jy/beam
! Clean residual mean=0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.287803 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 34 components and 0.287803 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.161 mas, bmaj=3.536 mas, bpa=-1.351 degrees
! Estimated noise=0.2941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000867379 Jy
! Component: 100  -  total flux cleaned = 0.00138287 Jy
! Component: 150  -  total flux cleaned = 0.00153405 Jy
! Component: 200  -  total flux cleaned = 0.00159814 Jy
! Total flux subtracted in 200 components = 0.00159814 Jy
! Clean residual min=-0.001374 max=0.001421 Jy/beam
! Clean residual mean=0.000002 rms=0.000381 Jy/beam
! Combined flux in latest and established models = 0.289401 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.5963e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131033 Jy
! Component: 150  -  total flux cleaned = 0.00022134 Jy
! Component: 200  -  total flux cleaned = 0.000305002 Jy
! Total flux subtracted in 200 components = 0.000305002 Jy
! Clean residual min=-0.001285 max=0.001407 Jy/beam
! Clean residual mean=0.000002 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.289706 Jy
! Adding 79 model components to the UV plane model.
! The established model now contains 105 components and 0.289706 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=2.202 mas, bpa=4.001 degrees
! Estimated noise=0.246941 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.1074e-05 Jy
! Component: 100  -  total flux cleaned = -0.000276276 Jy
! Component: 150  -  total flux cleaned = -0.000308565 Jy
! Component: 200  -  total flux cleaned = -0.000310352 Jy
! Total flux subtracted in 200 components = -0.000310352 Jy
! Clean residual min=-0.001417 max=0.001302 Jy/beam
! Clean residual mean=0.000001 rms=0.000323 Jy/beam
! Combined flux in latest and established models = 0.289395 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.289396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067875Jy  sigma=1.374517
! Fit after  self-cal, rms=0.067874Jy  sigma=1.374471
wmodel /J0141-0202_X_map.mod
! wmodel: Unable to open new model file: /J0141-0202_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0141-0202_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.045 x 2.202 at 4.001 degrees (North through East)
! Clean map  min=-0.0012543  max=0.26918 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0141-0202_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.269177 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000321566 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.358388 0.358388 0.716776 1.43355 2.8671 5.73421 11.4684 22.9368 45.8737 91.7473
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.269 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  837.081 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0141-0202_X_dfm.log closed on Thu May 19 22:56:39 2016