! Started logfile: /scr/pima/bg219i_uvs/J0141-0202_S_uvs.log on Wed Apr  6 22:47:58 2016
obs /scr/pima/bg219i_uvs/J0141-0202_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0141-0202_S_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.9 visibilities/baseline/integration-bin.
! Found source: J0141-0202
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6804 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0141-0202_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.034494Jy  sigma=21.794484
! Fit after  self-cal, rms=0.792235Jy  sigma=16.651424
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.096 mas, bmaj=6.8 mas, bpa=3.89 degrees
! Estimated noise=0.562704 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161219 Jy
! Component: 100  -  total flux cleaned = 0.196659 Jy
! Total flux subtracted in 100 components = 0.196659 Jy
! Clean residual min=-0.004583 max=0.011146 Jy/beam
! Clean residual mean=0.000012 rms=0.001296 Jy/beam
! Combined flux in latest and established models = 0.196659 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.196659 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066748Jy  sigma=1.359001
! Fit after  self-cal, rms=0.066743Jy  sigma=1.358928
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0111619 Jy
! Component: 100  -  total flux cleaned = 0.0167213 Jy
! Total flux subtracted in 100 components = 0.0167213 Jy
! Clean residual min=-0.003737 max=0.004198 Jy/beam
! Clean residual mean=0.000004 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.21338 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 28 components and 0.21338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064659Jy  sigma=1.312627
! Fit after  self-cal, rms=0.064654Jy  sigma=1.312485
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.824 mas, bmaj=8.004 mas, bpa=3.797 degrees
! Estimated noise=0.42345 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00379923 Jy
! Component: 100  -  total flux cleaned = 0.00586207 Jy
! Component: 150  -  total flux cleaned = 0.00704226 Jy
! Component: 200  -  total flux cleaned = 0.00771694 Jy
! Total flux subtracted in 200 components = 0.00771694 Jy
! Clean residual min=-0.003248 max=0.003179 Jy/beam
! Clean residual mean=0.000001 rms=0.000785 Jy/beam
! Combined flux in latest and established models = 0.221097 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 51 components and 0.221097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064435Jy  sigma=1.307807
! Fit after  self-cal, rms=0.064438Jy  sigma=1.307788
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.824 x 8.004 at 3.797 degrees (North through East)
! Clean map  min=-0.0031633  max=0.20855 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     HN        1.01     KP        1.00     
!   LA        1.01     MK        1.03     NL        1.06     OV        1.00     
!   PT        1.00     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.03     KP        0.99     
!   LA        1.02     MK        1.00     NL        1.05     OV        1.03     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.04     KP        0.97     
!   LA        1.01     MK        1.04     NL        1.00     OV        1.00     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.98     HN        1.00     KP        0.95     
!   LA        0.99     MK        1.03     NL        0.98     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.064438Jy  sigma=1.307788
! Fit after  self-cal, rms=0.064294Jy  sigma=1.298488
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.846 mas, bmaj=8.042 mas, bpa=4.039 degrees
! Estimated noise=0.424616 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000349103 Jy
! Component: 100  -  total flux cleaned = -0.000487126 Jy
! Component: 150  -  total flux cleaned = -0.000531533 Jy
! Component: 200  -  total flux cleaned = -0.00056932 Jy
! Total flux subtracted in 200 components = -0.00056932 Jy
! Clean residual min=-0.002901 max=0.002526 Jy/beam
! Clean residual mean=0.000002 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.220528 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 68 components and 0.220528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064272Jy  sigma=1.298137
! Fit after  self-cal, rms=0.064278Jy  sigma=1.298098
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064278Jy  sigma=1.298098
! Fit after  self-cal, rms=0.063825Jy  sigma=1.288278
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.844 mas, bmaj=8.049 mas, bpa=3.988 degrees
! Estimated noise=0.424222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000470094 Jy
! Component: 100  -  total flux cleaned = -0.000485292 Jy
! Component: 150  -  total flux cleaned = -0.000473359 Jy
! Component: 200  -  total flux cleaned = -0.000462042 Jy
! Total flux subtracted in 200 components = -0.000462042 Jy
! Clean residual min=-0.002106 max=0.001942 Jy/beam
! Clean residual mean=-0.000002 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.220065 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 69 components and 0.220065 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063819Jy  sigma=1.288162
! Fit after  self-cal, rms=0.063821Jy  sigma=1.288128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.90848e-05 Jy
! Component: 100  -  total flux cleaned = 6.81963e-05 Jy
! Component: 150  -  total flux cleaned = 5.99105e-05 Jy
! Component: 200  -  total flux cleaned = 6.01101e-05 Jy
! Total flux subtracted in 200 components = 6.01101e-05 Jy
! Clean residual min=-0.002106 max=0.001940 Jy/beam
! Clean residual mean=-0.000002 rms=0.000521 Jy/beam
! Combined flux in latest and established models = 0.220126 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 72 components and 0.220126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063819Jy  sigma=1.288086
! Fit after  self-cal, rms=0.063819Jy  sigma=1.288082
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063819Jy  sigma=1.288082
! Fit after  self-cal, rms=0.063872Jy  sigma=1.288053
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.848 mas, bmaj=8.057 mas, bpa=3.992 degrees
! Estimated noise=0.424366 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000288466 Jy
! Component: 100  -  total flux cleaned = -0.000298791 Jy
! Component: 150  -  total flux cleaned = -0.000306838 Jy
! Component: 200  -  total flux cleaned = -0.000314554 Jy
! Total flux subtracted in 200 components = -0.000314554 Jy
! Clean residual min=-0.002113 max=0.001951 Jy/beam
! Clean residual mean=-0.000002 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.219811 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 75 components and 0.219811 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063869Jy  sigma=1.288006
! Fit after  self-cal, rms=0.063870Jy  sigma=1.288002
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.6737e-05 Jy
! Component: 100  -  total flux cleaned = 1.94462e-05 Jy
! Component: 150  -  total flux cleaned = 1.25816e-05 Jy
! Component: 200  -  total flux cleaned = 6.04549e-06 Jy
! Total flux subtracted in 200 components = 6.04549e-06 Jy
! Clean residual min=-0.002108 max=0.001945 Jy/beam
! Clean residual mean=-0.000002 rms=0.000520 Jy/beam
! Combined flux in latest and established models = 0.219817 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 75 components and 0.219817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063868Jy  sigma=1.287977
! Fit after  self-cal, rms=0.063868Jy  sigma=1.287977
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063868Jy  sigma=1.287977
! Fit after  self-cal, rms=0.063901Jy  sigma=1.287961
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.661 mas, bmaj=12.28 mas, bpa=0.4204 degrees
! Estimated noise=0.504272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.08221e-05 Jy
! Component: 100  -  total flux cleaned = -7.54005e-05 Jy
! Component: 150  -  total flux cleaned = -5.62829e-05 Jy
! Component: 200  -  total flux cleaned = -4.53958e-05 Jy
! Total flux subtracted in 200 components = -4.53958e-05 Jy
! Clean residual min=-0.001807 max=0.002238 Jy/beam
! Clean residual mean=-0.000004 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.219772 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 79 components and 0.219772 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063902Jy  sigma=1.287958
! Fit after  self-cal, rms=0.063901Jy  sigma=1.287948
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.75657e-05 Jy
! Component: 100  -  total flux cleaned = 2.98528e-05 Jy
! Component: 150  -  total flux cleaned = 3.51762e-05 Jy
! Component: 200  -  total flux cleaned = 3.99875e-05 Jy
! Total flux subtracted in 200 components = 3.99875e-05 Jy
! Clean residual min=-0.001816 max=0.002236 Jy/beam
! Clean residual mean=-0.000004 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.219812 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 80 components and 0.219812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063902Jy  sigma=1.287957
! Fit after  self-cal, rms=0.063900Jy  sigma=1.287947
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=8.063 mas, bpa=3.989 degrees
! Estimated noise=0.424434 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.851 x 8.063 at 3.989 degrees (North through East)
! Clean map  min=-0.0020905  max=0.20867 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.115 mas, bmaj=6.846 mas, bpa=4.106 degrees
! Estimated noise=0.565045 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.161861 Jy
! Component: 100  -  total flux cleaned = 0.197267 Jy
! Component: 150  -  total flux cleaned = 0.207568 Jy
! Component: 200  -  total flux cleaned = 0.212664 Jy
! Total flux subtracted in 200 components = 0.212664 Jy
! Clean residual min=-0.002994 max=0.002760 Jy/beam
! Clean residual mean=-0.000000 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.212664 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.212664 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=8.063 mas, bpa=3.989 degrees
! Estimated noise=0.424434 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00341843 Jy
! Component: 100  -  total flux cleaned = 0.0050832 Jy
! Component: 150  -  total flux cleaned = 0.00604743 Jy
! Component: 200  -  total flux cleaned = 0.00662214 Jy
! Total flux subtracted in 200 components = 0.00662214 Jy
! Clean residual min=-0.002074 max=0.001946 Jy/beam
! Clean residual mean=-0.000002 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.219286 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 37 components and 0.219286 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.661 mas, bmaj=12.28 mas, bpa=0.4204 degrees
! Estimated noise=0.504272 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000346889 Jy
! Component: 100  -  total flux cleaned = 0.000369449 Jy
! Component: 150  -  total flux cleaned = 0.000389726 Jy
! Component: 200  -  total flux cleaned = 0.000402394 Jy
! Total flux subtracted in 200 components = 0.000402394 Jy
! Clean residual min=-0.001829 max=0.002244 Jy/beam
! Clean residual mean=-0.000004 rms=0.000617 Jy/beam
! Combined flux in latest and established models = 0.219688 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76594e-05 Jy
! Component: 100  -  total flux cleaned = 3.37887e-05 Jy
! Component: 150  -  total flux cleaned = 4.35493e-05 Jy
! Component: 200  -  total flux cleaned = 5.72825e-05 Jy
! Total flux subtracted in 200 components = 5.72825e-05 Jy
! Clean residual min=-0.001828 max=0.002239 Jy/beam
! Clean residual mean=-0.000004 rms=0.000616 Jy/beam
! Combined flux in latest and established models = 0.219746 Jy
! Adding 9 model components to the UV plane model.
! The established model now contains 45 components and 0.219746 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.851 mas, bmaj=8.063 mas, bpa=3.989 degrees
! Estimated noise=0.424434 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.09764e-06 Jy
! Component: 100  -  total flux cleaned = -3.59932e-05 Jy
! Component: 150  -  total flux cleaned = -7.2066e-06 Jy
! Component: 200  -  total flux cleaned = 6.12426e-06 Jy
! Total flux subtracted in 200 components = 6.12426e-06 Jy
! Clean residual min=-0.002088 max=0.001967 Jy/beam
! Clean residual mean=-0.000002 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.219752 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.219752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063913Jy  sigma=1.288290
! Fit after  self-cal, rms=0.063912Jy  sigma=1.288282
wmodel /scr/pima/bg219i_uvs/J0141-0202_S_map.mod
! Writing 51 model components to file: /scr/pima/bg219i_uvs/J0141-0202_S_map.mod
wobs /scr/pima/bg219i_uvs/J0141-0202_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0141-0202_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J0141-0202_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219i_uvs/J0141-0202_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000313487 Jy
! Component: 100  -  total flux cleaned = 0.000758708 Jy
! Component: 150  -  total flux cleaned = 0.000984724 Jy
! Component: 200  -  total flux cleaned = 0.000923168 Jy
! Component: 250  -  total flux cleaned = 0.000924228 Jy
! Component: 300  -  total flux cleaned = 0.000954108 Jy
! Component: 350  -  total flux cleaned = 0.000954449 Jy
! Component: 400  -  total flux cleaned = 0.000926336 Jy
! Component: 450  -  total flux cleaned = 0.000789904 Jy
! Component: 500  -  total flux cleaned = 0.000789712 Jy
! Component: 550  -  total flux cleaned = 0.000788821 Jy
! Component: 600  -  total flux cleaned = 0.000711366 Jy
! Component: 650  -  total flux cleaned = 0.000711459 Jy
! Component: 700  -  total flux cleaned = 0.00071144 Jy
! Component: 750  -  total flux cleaned = 0.000662454 Jy
! Component: 800  -  total flux cleaned = 0.000686554 Jy
! Component: 850  -  total flux cleaned = 0.000686345 Jy
! Component: 900  -  total flux cleaned = 0.000709619 Jy
! Component: 950  -  total flux cleaned = 0.000732593 Jy
! Component: 1000  -  total flux cleaned = 0.000823115 Jy
! Component: 1050  -  total flux cleaned = 0.000800154 Jy
! Component: 1100  -  total flux cleaned = 0.000822277 Jy
! Component: 1150  -  total flux cleaned = 0.000865942 Jy
! Component: 1200  -  total flux cleaned = 0.000866875 Jy
! Component: 1250  -  total flux cleaned = 0.00101569 Jy
! Component: 1300  -  total flux cleaned = 0.00103661 Jy
! Component: 1350  -  total flux cleaned = 0.00107848 Jy
! Component: 1400  -  total flux cleaned = 0.00118108 Jy
! Component: 1450  -  total flux cleaned = 0.00118141 Jy
! Component: 1500  -  total flux cleaned = 0.00126109 Jy
! Component: 1550  -  total flux cleaned = 0.00128101 Jy
! Component: 1600  -  total flux cleaned = 0.00141715 Jy
! Component: 1650  -  total flux cleaned = 0.00141697 Jy
! Component: 1700  -  total flux cleaned = 0.00151183 Jy
! Component: 1750  -  total flux cleaned = 0.00158688 Jy
! Component: 1800  -  total flux cleaned = 0.00167961 Jy
! Component: 1850  -  total flux cleaned = 0.00171594 Jy
! Component: 1900  -  total flux cleaned = 0.00177008 Jy
! Component: 1950  -  total flux cleaned = 0.00185966 Jy
! Component: 2000  -  total flux cleaned = 0.00191289 Jy
! Component: 2050  -  total flux cleaned = 0.00203564 Jy
! Component: 2100  -  total flux cleaned = 0.00203561 Jy
! Component: 2150  -  total flux cleaned = 0.00215602 Jy
! Component: 2200  -  total flux cleaned = 0.0021561 Jy
! Component: 2250  -  total flux cleaned = 0.00225729 Jy
! Component: 2300  -  total flux cleaned = 0.00235726 Jy
! Component: 2350  -  total flux cleaned = 0.00250549 Jy
! Component: 2400  -  total flux cleaned = 0.00252195 Jy
! Component: 2450  -  total flux cleaned = 0.00263487 Jy
! Component: 2500  -  total flux cleaned = 0.00271464 Jy
! Component: 2550  -  total flux cleaned = 0.00282566 Jy
! Component: 2600  -  total flux cleaned = 0.00285734 Jy
! Component: 2650  -  total flux cleaned = 0.00290402 Jy
! Component: 2700  -  total flux cleaned = 0.00298121 Jy
! Component: 2750  -  total flux cleaned = 0.00301172 Jy
! Component: 2800  -  total flux cleaned = 0.00308777 Jy
! Component: 2850  -  total flux cleaned = 0.00313302 Jy
! Component: 2900  -  total flux cleaned = 0.00319249 Jy
! Component: 2950  -  total flux cleaned = 0.00326631 Jy
! Component: 3000  -  total flux cleaned = 0.00325164 Jy
! Component: 3050  -  total flux cleaned = 0.00333875 Jy
! Component: 3100  -  total flux cleaned = 0.00333873 Jy
! Component: 3150  -  total flux cleaned = 0.00332452 Jy
! Component: 3200  -  total flux cleaned = 0.00338125 Jy
! Component: 3250  -  total flux cleaned = 0.00345123 Jy
! Component: 3300  -  total flux cleaned = 0.00345125 Jy
! Component: 3350  -  total flux cleaned = 0.00347901 Jy
! Component: 3400  -  total flux cleaned = 0.00349265 Jy
! Component: 3450  -  total flux cleaned = 0.00343807 Jy
! Component: 3500  -  total flux cleaned = 0.00341098 Jy
! Component: 3550  -  total flux cleaned = 0.00346452 Jy
! Component: 3600  -  total flux cleaned = 0.00341116 Jy
! Component: 3650  -  total flux cleaned = 0.00342443 Jy
! Component: 3700  -  total flux cleaned = 0.00347709 Jy
! Component: 3750  -  total flux cleaned = 0.00350317 Jy
! Component: 3800  -  total flux cleaned = 0.00351619 Jy
! Component: 3850  -  total flux cleaned = 0.00351615 Jy
! Component: 3900  -  total flux cleaned = 0.00351627 Jy
! Component: 3950  -  total flux cleaned = 0.00355432 Jy
! Component: 4000  -  total flux cleaned = 0.00355419 Jy
! Component: 4050  -  total flux cleaned = 0.00354174 Jy
! Total flux subtracted in 4096 components = 0.0035419 Jy
! Clean residual min=-0.000815 max=0.000775 Jy/beam
! Clean residual mean=-0.000001 rms=0.000231 Jy/beam
! Combined flux in latest and established models = 0.223294 Jy
keep
! Adding 289 model components to the UV plane model.
! The established model now contains 340 components and 0.223294 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0141-0202_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.851 x 8.063 at 3.989 degrees (North through East)
! Clean map  min=-0.0014132  max=0.20926 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0141-0202_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.209257 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000229905 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.329603 0.329603 0.659206 1.31841 2.63682 5.27365 10.5473 21.0946 42.1892 84.3784
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.209 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  910.185 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0141-0202_S_uvs.log closed on Wed Apr  6 22:48:02 2016