! Started logfile: /scr/pima/bg219i_uvs/J0138-2711_X_dfm.log on Thu May 19 22:56:20 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0138-2711_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0138-2711_X_uva.fits
! AN table 1: 42 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.90582 visibilities/baseline/integration-bin.
! Found source: J0138-2711
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 20544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0138-2711_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.016493Jy  sigma=20.098698
! Fit after  self-cal, rms=0.869919Jy  sigma=17.074916
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6083 mas, bmaj=1.627 mas, bpa=-5.34 degrees
! Estimated noise=0.5173 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0959433 Jy
! Component: 100  -  total flux cleaned = 0.120019 Jy
! Total flux subtracted in 100 components = 0.120019 Jy
! Clean residual min=-0.004919 max=0.012631 Jy/beam
! Clean residual mean=-0.000010 rms=0.001401 Jy/beam
! Combined flux in latest and established models = 0.120019 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.120019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086575Jy  sigma=1.534243
! Fit after  self-cal, rms=0.086473Jy  sigma=1.532403
! Inverting map 
! Added new window around map position (0.6, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0136195 Jy
! Component: 100  -  total flux cleaned = 0.0218693 Jy
! Total flux subtracted in 100 components = 0.0218693 Jy
! Clean residual min=-0.003881 max=0.005274 Jy/beam
! Clean residual mean=-0.000005 rms=0.000994 Jy/beam
! Combined flux in latest and established models = 0.141888 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 23 components and 0.141888 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083065Jy  sigma=1.438668
! Fit after  self-cal, rms=0.083007Jy  sigma=1.437419
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8165 mas, bmaj=2.105 mas, bpa=-4.212 degrees
! Estimated noise=0.265099 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104292 Jy
! Component: 100  -  total flux cleaned = 0.0159478 Jy
! Component: 150  -  total flux cleaned = 0.0191165 Jy
! Component: 200  -  total flux cleaned = 0.020948 Jy
! Total flux subtracted in 200 components = 0.020948 Jy
! Clean residual min=-0.002283 max=0.003256 Jy/beam
! Clean residual mean=-0.000001 rms=0.000646 Jy/beam
! Combined flux in latest and established models = 0.162836 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 47 components and 0.162836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081981Jy  sigma=1.404377
! Fit after  self-cal, rms=0.081968Jy  sigma=1.403630
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8165 x 2.105 at -4.212 degrees (North through East)
! Clean map  min=-0.0021211  max=0.13247 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.03     HN        1.20     KP        0.93     
!   LA        0.97     MK        1.02     NL        1.01     OV        0.97     
!   PT        0.97     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.07     HN        1.09     KP        0.99     
!   LA        0.98     MK        0.96     NL        0.98     OV        0.94     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        1.18     KP        0.98     
!   LA        0.96     MK        0.99     NL        0.99     OV        0.97     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.09     KP        0.98     
!   LA        0.98     MK        0.96     NL        1.03     OV        0.99     
!   PT        0.99     SC        0.95     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.12     KP        0.93     
!   LA        1.00     MK        1.02     NL        1.03     OV        0.98     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.06     HN        1.14     KP        0.98     
!   LA        0.97     MK        0.98     NL        0.98     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.16     KP        0.97     
!   LA        0.99     MK        1.02     NL        0.98     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.09     HN        1.13     KP        0.97     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.06     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.04     HN        1.12     KP        0.97     
!   LA        0.96     MK        0.97     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.05     HN        1.13     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.00     OV        0.97     
!   PT        0.98     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.081968Jy  sigma=1.403630
! Fit after  self-cal, rms=0.085489Jy  sigma=1.396467
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8186 mas, bmaj=2.097 mas, bpa=-3.992 degrees
! Estimated noise=0.263991 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000225308 Jy
! Component: 100  -  total flux cleaned = 0.000180658 Jy
! Component: 150  -  total flux cleaned = 0.000143592 Jy
! Component: 200  -  total flux cleaned = 0.000127653 Jy
! Total flux subtracted in 200 components = 0.000127653 Jy
! Clean residual min=-0.001859 max=0.002199 Jy/beam
! Clean residual mean=0.000001 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.162964 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.162964 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085482Jy  sigma=1.396171
! Fit after  self-cal, rms=0.085572Jy  sigma=1.396071
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085572Jy  sigma=1.396071
! Fit after  self-cal, rms=0.086891Jy  sigma=1.391138
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8176 mas, bmaj=2.099 mas, bpa=-3.81 degrees
! Estimated noise=0.263606 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000432563 Jy
! Component: 100  -  total flux cleaned = -0.000468899 Jy
! Component: 150  -  total flux cleaned = -0.000499867 Jy
! Component: 200  -  total flux cleaned = -0.000513261 Jy
! Total flux subtracted in 200 components = -0.000513261 Jy
! Clean residual min=-0.001612 max=0.001795 Jy/beam
! Clean residual mean=0.000003 rms=0.000377 Jy/beam
! Combined flux in latest and established models = 0.16245 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 57 components and 0.16245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086884Jy  sigma=1.390965
! Fit after  self-cal, rms=0.086920Jy  sigma=1.390905
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-33.8, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125309 Jy
! Component: 100  -  total flux cleaned = 0.00123478 Jy
! Component: 150  -  total flux cleaned = 0.00117243 Jy
! Component: 200  -  total flux cleaned = 0.00112103 Jy
! Total flux subtracted in 200 components = 0.00112103 Jy
! Clean residual min=-0.001403 max=0.001681 Jy/beam
! Clean residual mean=0.000003 rms=0.000366 Jy/beam
! Combined flux in latest and established models = 0.163571 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 73 components and 0.163571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086887Jy  sigma=1.390379
! Fit after  self-cal, rms=0.086889Jy  sigma=1.390311
! Inverting map 
! Added new window around map position (15.4, 11.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125502 Jy
! Component: 100  -  total flux cleaned = 0.00135102 Jy
! Component: 150  -  total flux cleaned = 0.00140559 Jy
! Component: 200  -  total flux cleaned = 0.00142933 Jy
! Total flux subtracted in 200 components = 0.00142933 Jy
! Clean residual min=-0.001401 max=0.001542 Jy/beam
! Clean residual mean=0.000003 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.165001 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 85 components and 0.165001 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086851Jy  sigma=1.389810
! Fit after  self-cal, rms=0.086845Jy  sigma=1.389779
! Inverting map 
! Added new window around map position (1.6, 4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000577016 Jy
! Component: 100  -  total flux cleaned = 0.00059042 Jy
! Component: 150  -  total flux cleaned = 0.000708378 Jy
! Component: 200  -  total flux cleaned = 0.000749265 Jy
! Total flux subtracted in 200 components = 0.000749265 Jy
! Clean residual min=-0.001358 max=0.001505 Jy/beam
! Clean residual mean=0.000003 rms=0.000341 Jy/beam
! Combined flux in latest and established models = 0.16575 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 97 components and 0.16575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086815Jy  sigma=1.389270
! Fit after  self-cal, rms=0.086814Jy  sigma=1.389233
! Inverting map 
! Added new window around map position (25.2, 11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133612 Jy
! Component: 100  -  total flux cleaned = 0.00163213 Jy
! Component: 150  -  total flux cleaned = 0.00177699 Jy
! Component: 200  -  total flux cleaned = 0.00194824 Jy
! Total flux subtracted in 200 components = 0.00194824 Jy
! Clean residual min=-0.001326 max=0.001256 Jy/beam
! Clean residual mean=0.000002 rms=0.000325 Jy/beam
! Combined flux in latest and established models = 0.167698 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 115 components and 0.167698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086786Jy  sigma=1.388723
! Fit after  self-cal, rms=0.086780Jy  sigma=1.388679
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086780Jy  sigma=1.388679
! Fit after  self-cal, rms=0.087475Jy  sigma=1.386951
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.817 mas, bmaj=2.099 mas, bpa=-3.85 degrees
! Estimated noise=0.263399 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000327563 Jy
! Component: 100  -  total flux cleaned = 0.000412394 Jy
! Component: 150  -  total flux cleaned = 0.000488015 Jy
! Component: 200  -  total flux cleaned = 0.000523481 Jy
! Total flux subtracted in 200 components = 0.000523481 Jy
! Clean residual min=-0.001271 max=0.001208 Jy/beam
! Clean residual mean=0.000002 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.168222 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 133 components and 0.168222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087464Jy  sigma=1.386787
! Fit after  self-cal, rms=0.087482Jy  sigma=1.386757
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000134812 Jy
! Component: 100  -  total flux cleaned = 0.000151684 Jy
! Component: 150  -  total flux cleaned = 0.0001838 Jy
! Component: 200  -  total flux cleaned = 0.000184202 Jy
! Total flux subtracted in 200 components = 0.000184202 Jy
! Clean residual min=-0.001254 max=0.001250 Jy/beam
! Clean residual mean=0.000002 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.168406 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 138 components and 0.168406 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087475Jy  sigma=1.386661
! Fit after  self-cal, rms=0.087475Jy  sigma=1.386656
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087475Jy  sigma=1.386656
! Fit after  self-cal, rms=0.087499Jy  sigma=1.386645
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=5.493 mas, bpa=0.7908 degrees
! Estimated noise=0.335047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.63079e-07 Jy
! Component: 100  -  total flux cleaned = 0.000163304 Jy
! Component: 150  -  total flux cleaned = 0.000203963 Jy
! Component: 200  -  total flux cleaned = 0.00021368 Jy
! Total flux subtracted in 200 components = 0.00021368 Jy
! Clean residual min=-0.001476 max=0.001191 Jy/beam
! Clean residual mean=0.000005 rms=0.000364 Jy/beam
! Combined flux in latest and established models = 0.168619 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 148 components and 0.168619 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087497Jy  sigma=1.386619
! Fit after  self-cal, rms=0.087497Jy  sigma=1.386608
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.79546e-05 Jy
! Component: 100  -  total flux cleaned = 6.15567e-05 Jy
! Component: 150  -  total flux cleaned = 7.04204e-05 Jy
! Component: 200  -  total flux cleaned = 7.93052e-05 Jy
! Total flux subtracted in 200 components = 7.93052e-05 Jy
! Clean residual min=-0.001474 max=0.001203 Jy/beam
! Clean residual mean=0.000005 rms=0.000363 Jy/beam
! Combined flux in latest and established models = 0.168699 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 154 components and 0.168699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087495Jy  sigma=1.386608
! Fit after  self-cal, rms=0.087495Jy  sigma=1.386601
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8171 mas, bmaj=2.099 mas, bpa=-3.862 degrees
! Estimated noise=0.263323 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8171 x 2.099 at -3.862 degrees (North through East)
! Clean map  min=-0.0011947  max=0.13237 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6084 mas, bmaj=1.622 mas, bpa=-4.841 degrees
! Estimated noise=0.514498 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0951836 Jy
! Component: 100  -  total flux cleaned = 0.119814 Jy
! Component: 150  -  total flux cleaned = 0.133431 Jy
! Component: 200  -  total flux cleaned = 0.141706 Jy
! Total flux subtracted in 200 components = 0.141706 Jy
! Clean residual min=-0.003401 max=0.004463 Jy/beam
! Clean residual mean=-0.000004 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.141706 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.141706 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8171 mas, bmaj=2.099 mas, bpa=-3.862 degrees
! Estimated noise=0.263323 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00968176 Jy
! Component: 100  -  total flux cleaned = 0.0144532 Jy
! Component: 150  -  total flux cleaned = 0.0172269 Jy
! Component: 200  -  total flux cleaned = 0.0192847 Jy
! Total flux subtracted in 200 components = 0.0192847 Jy
! Clean residual min=-0.001456 max=0.001367 Jy/beam
! Clean residual mean=0.000002 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.16099 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 51 components and 0.16099 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.231 mas, bmaj=5.493 mas, bpa=0.7908 degrees
! Estimated noise=0.335047 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00206794 Jy
! Component: 100  -  total flux cleaned = 0.00338564 Jy
! Component: 150  -  total flux cleaned = 0.0044224 Jy
! Component: 200  -  total flux cleaned = 0.0052639 Jy
! Total flux subtracted in 200 components = 0.0052639 Jy
! Clean residual min=-0.001456 max=0.001250 Jy/beam
! Clean residual mean=0.000005 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.166254 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000693036 Jy
! Component: 100  -  total flux cleaned = 0.00111465 Jy
! Component: 150  -  total flux cleaned = 0.00133771 Jy
! Component: 200  -  total flux cleaned = 0.00146433 Jy
! Total flux subtracted in 200 components = 0.00146433 Jy
! Clean residual min=-0.001372 max=0.001238 Jy/beam
! Clean residual mean=0.000005 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.167719 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 93 components and 0.167719 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8171 mas, bmaj=2.099 mas, bpa=-3.862 degrees
! Estimated noise=0.263323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000425049 Jy
! Component: 100  -  total flux cleaned = -0.000345919 Jy
! Component: 150  -  total flux cleaned = -0.000145949 Jy
! Component: 200  -  total flux cleaned = 3.52168e-05 Jy
! Total flux subtracted in 200 components = 3.52168e-05 Jy
! Clean residual min=-0.001310 max=0.001222 Jy/beam
! Clean residual mean=0.000002 rms=0.000303 Jy/beam
! Combined flux in latest and established models = 0.167754 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 111 components and 0.167754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.087538Jy  sigma=1.387336
! Fit after  self-cal, rms=0.087526Jy  sigma=1.387219
wmodel /J0138-2711_X_map.mod
! wmodel: Unable to open new model file: /J0138-2711_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0138-2711_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8171 x 2.099 at -3.862 degrees (North through East)
! Clean map  min=-0.0012145  max=0.13327 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0138-2711_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133269 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000299208 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.673542 0.673542 1.34708 2.69417 5.38833 10.7767 21.5533 43.1067 86.2133
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  445.406 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0138-2711_X_dfm.log closed on Thu May 19 22:56:23 2016