! Started logfile: /scr/pima/bg219i_uvs/J0138-2254_X_dfm.log on Thu May 19 22:56:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0138-2254_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0138-2254_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.897619 visibilities/baseline/integration-bin.
! Found source: J0138-2254
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13572 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0138-2254_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.015948Jy  sigma=20.725960
! Fit after  self-cal, rms=0.833217Jy  sigma=16.870041
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6318 mas, bmaj=1.656 mas, bpa=-4.902 degrees
! Estimated noise=0.51394 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124148 Jy
! Component: 100  -  total flux cleaned = 0.1632 Jy
! Total flux subtracted in 100 components = 0.1632 Jy
! Clean residual min=-0.006267 max=0.015909 Jy/beam
! Clean residual mean=-0.000005 rms=0.001601 Jy/beam
! Combined flux in latest and established models = 0.1632 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.1632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084000Jy  sigma=1.580611
! Fit after  self-cal, rms=0.083924Jy  sigma=1.578626
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170116 Jy
! Component: 100  -  total flux cleaned = 0.0259662 Jy
! Total flux subtracted in 100 components = 0.0259662 Jy
! Clean residual min=-0.004230 max=0.007099 Jy/beam
! Clean residual mean=-0.000002 rms=0.001047 Jy/beam
! Combined flux in latest and established models = 0.189166 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 21 components and 0.189166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079629Jy  sigma=1.457288
! Fit after  self-cal, rms=0.079620Jy  sigma=1.456888
! Inverting map 
! Added new window around map position (-0.4, -2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0066545 Jy
! Component: 100  -  total flux cleaned = 0.0105779 Jy
! Total flux subtracted in 100 components = 0.0105779 Jy
! Clean residual min=-0.003634 max=0.004467 Jy/beam
! Clean residual mean=-0.000001 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.199744 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 35 components and 0.199744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.079011Jy  sigma=1.436638
! Fit after  self-cal, rms=0.078977Jy  sigma=1.435704
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8236 mas, bmaj=2.026 mas, bpa=-4.359 degrees
! Estimated noise=0.33782 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042818 Jy
! Component: 100  -  total flux cleaned = 0.00665127 Jy
! Component: 150  -  total flux cleaned = 0.00813729 Jy
! Component: 200  -  total flux cleaned = 0.00883034 Jy
! Total flux subtracted in 200 components = 0.00883034 Jy
! Clean residual min=-0.003218 max=0.004075 Jy/beam
! Clean residual mean=-0.000004 rms=0.000873 Jy/beam
! Combined flux in latest and established models = 0.208575 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 57 components and 0.208575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078840Jy  sigma=1.428324
! Fit after  self-cal, rms=0.078831Jy  sigma=1.427862
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8236 x 2.026 at -4.359 degrees (North through East)
! Clean map  min=-0.0028723  max=0.1648 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.15     KP        0.98     
!   LA        0.98     MK        0.94     NL        0.98     OV        0.98     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.05     HN        1.12     KP        0.95     
!   LA        0.96     MK        1.00     NL        1.01     OV        0.99     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.08     HN        1.10     KP        0.99     
!   LA        0.96     MK        0.95     NL        0.99     OV        0.96     
!   PT        0.97     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.07     HN        1.04     KP        0.95     
!   LA        0.98     MK        0.99     NL        0.98     OV        0.99     
!   PT        0.95     SC        1.03     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.10     KP        0.97     
!   LA        1.01     MK        0.98     NL        0.98     OV        0.99     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.09     HN        1.05     KP        0.96     
!   LA        1.00     MK        1.04     NL        0.95     OV        0.99     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.10     HN        1.07     KP        0.97     
!   LA        0.97     MK        0.94     NL        1.00     OV        0.97     
!   PT        0.99     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        1.04     KP        0.97     
!   LA        1.00     MK        1.00     NL        0.97     OV        1.01     
!   PT        0.96     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.12     HN        1.12     KP        0.97     
!   LA        1.01     MK        1.00     NL        0.98     OV        1.01     
!   PT        0.97     SC        1.02     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        1.13     KP        0.99     
!   LA        0.94     MK        1.01     NL        0.99     OV        0.97     
!   PT        0.99     SC        1.03     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.14     HN        1.13     KP        0.96     
!   LA        0.99     MK        1.00     NL        0.98     OV        1.01     
!   PT        0.98     SC        0.96     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.10     HN        1.01     KP        0.95     
!   LA        0.97     MK        1.03     NL        0.97     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.078831Jy  sigma=1.427862
! Fit after  self-cal, rms=0.081751Jy  sigma=1.414266
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8261 mas, bmaj=2.024 mas, bpa=-4.434 degrees
! Estimated noise=0.337199 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000307454 Jy
! Component: 100  -  total flux cleaned = 0.000425907 Jy
! Component: 150  -  total flux cleaned = 0.000489883 Jy
! Component: 200  -  total flux cleaned = 0.000544552 Jy
! Total flux subtracted in 200 components = 0.000544552 Jy
! Clean residual min=-0.002919 max=0.002550 Jy/beam
! Clean residual mean=-0.000008 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.209119 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 60 components and 0.209119 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081721Jy  sigma=1.413597
! Fit after  self-cal, rms=0.081819Jy  sigma=1.413409
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081819Jy  sigma=1.413409
! Fit after  self-cal, rms=0.082117Jy  sigma=1.407653
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8265 mas, bmaj=2.025 mas, bpa=-4.368 degrees
! Estimated noise=0.337402 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.95018e-05 Jy
! Component: 100  -  total flux cleaned = 0.000125099 Jy
! Component: 150  -  total flux cleaned = 0.000196893 Jy
! Component: 200  -  total flux cleaned = 0.000260185 Jy
! Total flux subtracted in 200 components = 0.000260185 Jy
! Clean residual min=-0.002402 max=0.002227 Jy/beam
! Clean residual mean=-0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.209379 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 60 components and 0.209379 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082102Jy  sigma=1.407285
! Fit after  self-cal, rms=0.082106Jy  sigma=1.407222
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.65082e-05 Jy
! Component: 100  -  total flux cleaned = 8.10079e-06 Jy
! Component: 150  -  total flux cleaned = 4.55344e-05 Jy
! Component: 200  -  total flux cleaned = 8.00887e-05 Jy
! Total flux subtracted in 200 components = 8.00887e-05 Jy
! Clean residual min=-0.002358 max=0.002223 Jy/beam
! Clean residual mean=-0.000003 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 0.209459 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 62 components and 0.209459 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082098Jy  sigma=1.406997
! Fit after  self-cal, rms=0.082094Jy  sigma=1.406973
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082094Jy  sigma=1.406973
! Fit after  self-cal, rms=0.082439Jy  sigma=1.406060
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8267 mas, bmaj=2.026 mas, bpa=-4.349 degrees
! Estimated noise=0.337179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237261 Jy
! Component: 100  -  total flux cleaned = -0.000219848 Jy
! Component: 150  -  total flux cleaned = -0.000186319 Jy
! Component: 200  -  total flux cleaned = -0.000170848 Jy
! Total flux subtracted in 200 components = -0.000170848 Jy
! Clean residual min=-0.002100 max=0.002053 Jy/beam
! Clean residual mean=-0.000001 rms=0.000499 Jy/beam
! Combined flux in latest and established models = 0.209289 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 63 components and 0.209289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082432Jy  sigma=1.405876
! Fit after  self-cal, rms=0.082436Jy  sigma=1.405846
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.35111e-05 Jy
! Component: 100  -  total flux cleaned = -4.10401e-05 Jy
! Component: 150  -  total flux cleaned = -2.58487e-05 Jy
! Component: 200  -  total flux cleaned = -1.16372e-05 Jy
! Total flux subtracted in 200 components = -1.16372e-05 Jy
! Clean residual min=-0.002073 max=0.002041 Jy/beam
! Clean residual mean=-0.000001 rms=0.000496 Jy/beam
! Combined flux in latest and established models = 0.209277 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 64 components and 0.209277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082431Jy  sigma=1.405714
! Fit after  self-cal, rms=0.082429Jy  sigma=1.405702
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082429Jy  sigma=1.405702
! Fit after  self-cal, rms=0.082476Jy  sigma=1.405687
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.186 mas, bmaj=5.054 mas, bpa=0.008794 degrees
! Estimated noise=0.431021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000504293 Jy
! Component: 100  -  total flux cleaned = -0.00049838 Jy
! Component: 150  -  total flux cleaned = -0.000494463 Jy
! Component: 200  -  total flux cleaned = -0.000491686 Jy
! Total flux subtracted in 200 components = -0.000491686 Jy
! Clean residual min=-0.002649 max=0.002368 Jy/beam
! Clean residual mean=-0.000002 rms=0.000628 Jy/beam
! Combined flux in latest and established models = 0.208785 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 64 components and 0.208785 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082478Jy  sigma=1.405696
! Fit after  self-cal, rms=0.082472Jy  sigma=1.405582
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.5469e-05 Jy
! Component: 100  -  total flux cleaned = -3.03682e-05 Jy
! Component: 150  -  total flux cleaned = -5.41486e-06 Jy
! Component: 200  -  total flux cleaned = 1.64171e-05 Jy
! Total flux subtracted in 200 components = 1.64171e-05 Jy
! Clean residual min=-0.002637 max=0.002352 Jy/beam
! Clean residual mean=-0.000002 rms=0.000623 Jy/beam
! Combined flux in latest and established models = 0.208802 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 64 components and 0.208802 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082476Jy  sigma=1.405634
! Fit after  self-cal, rms=0.082472Jy  sigma=1.405590
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8272 mas, bmaj=2.026 mas, bpa=-4.33 degrees
! Estimated noise=0.337062 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8272 x 2.026 at -4.33 degrees (North through East)
! Clean map  min=-0.0019244  max=0.1653 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.634 mas, bmaj=1.653 mas, bpa=-4.827 degrees
! Estimated noise=0.515278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124208 Jy
! Component: 100  -  total flux cleaned = 0.163848 Jy
! Component: 150  -  total flux cleaned = 0.181378 Jy
! Component: 200  -  total flux cleaned = 0.191271 Jy
! Total flux subtracted in 200 components = 0.191271 Jy
! Clean residual min=-0.003703 max=0.004987 Jy/beam
! Clean residual mean=-0.000001 rms=0.000847 Jy/beam
! Combined flux in latest and established models = 0.191271 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.191271 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8272 mas, bmaj=2.026 mas, bpa=-4.33 degrees
! Estimated noise=0.337062 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782803 Jy
! Component: 100  -  total flux cleaned = 0.0119103 Jy
! Component: 150  -  total flux cleaned = 0.0143456 Jy
! Component: 200  -  total flux cleaned = 0.0156447 Jy
! Total flux subtracted in 200 components = 0.0156447 Jy
! Clean residual min=-0.002296 max=0.002087 Jy/beam
! Clean residual mean=-0.000001 rms=0.000519 Jy/beam
! Combined flux in latest and established models = 0.206916 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 37 components and 0.206916 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.186 mas, bmaj=5.054 mas, bpa=0.008794 degrees
! Estimated noise=0.431021 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000692556 Jy
! Component: 100  -  total flux cleaned = 0.000856331 Jy
! Component: 150  -  total flux cleaned = 0.000994681 Jy
! Component: 200  -  total flux cleaned = 0.00111192 Jy
! Total flux subtracted in 200 components = 0.00111192 Jy
! Clean residual min=-0.002638 max=0.002373 Jy/beam
! Clean residual mean=-0.000002 rms=0.000637 Jy/beam
! Combined flux in latest and established models = 0.208028 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000124146 Jy
! Component: 100  -  total flux cleaned = 0.000209058 Jy
! Component: 150  -  total flux cleaned = 0.000282543 Jy
! Component: 200  -  total flux cleaned = 0.000346173 Jy
! Total flux subtracted in 200 components = 0.000346173 Jy
! Clean residual min=-0.002637 max=0.002347 Jy/beam
! Clean residual mean=-0.000002 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.208374 Jy
! Adding 10 model components to the UV plane model.
! The established model now contains 43 components and 0.208374 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8272 mas, bmaj=2.026 mas, bpa=-4.33 degrees
! Estimated noise=0.337062 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026092 Jy
! Component: 100  -  total flux cleaned = 0.00045938 Jy
! Component: 150  -  total flux cleaned = 0.000492489 Jy
! Component: 200  -  total flux cleaned = 0.000518777 Jy
! Total flux subtracted in 200 components = 0.000518777 Jy
! Clean residual min=-0.002175 max=0.002029 Jy/beam
! Clean residual mean=-0.000001 rms=0.000494 Jy/beam
! Combined flux in latest and established models = 0.208893 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 49 components and 0.208893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082492Jy  sigma=1.405948
! Fit after  self-cal, rms=0.082484Jy  sigma=1.405871
wmodel /J0138-2254_X_map.mod
! wmodel: Unable to open new model file: /J0138-2254_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0138-2254_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8272 x 2.026 at -4.33 degrees (North through East)
! Clean map  min=-0.0019618  max=0.16515 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0138-2254_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.165147 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000492621 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.894875 0.894875 1.78975 3.5795 7.159 14.318 28.636 57.272
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.165 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  335.242 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0138-2254_X_dfm.log closed on Thu May 19 22:56:15 2016