! Started logfile: /scr/pima/bg219i_uvs/J0123-0923_X_uvs.log on Wed Apr  6 23:26:07 2016
obs /scr/pima/bg219i_uvs/J0123-0923_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0123-0923_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.834698 visibilities/baseline/integration-bin.
! Found source: J0123-0923
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25692 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0123-0923_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.011768Jy  sigma=23.170025
! Fit after  self-cal, rms=0.878514Jy  sigma=20.030563
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6997 mas, bmaj=1.775 mas, bpa=-2.378 degrees
! Estimated noise=0.476537 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0843757 Jy
! Component: 100  -  total flux cleaned = 0.121013 Jy
! Total flux subtracted in 100 components = 0.121013 Jy
! Clean residual min=-0.008105 max=0.018851 Jy/beam
! Clean residual mean=0.000025 rms=0.002313 Jy/beam
! Combined flux in latest and established models = 0.121013 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.121013 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075916Jy  sigma=1.672528
! Fit after  self-cal, rms=0.075608Jy  sigma=1.666622
! Inverting map 
! Added new window around map position (0.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228366 Jy
! Component: 100  -  total flux cleaned = 0.037053 Jy
! Total flux subtracted in 100 components = 0.037053 Jy
! Clean residual min=-0.005124 max=0.008495 Jy/beam
! Clean residual mean=0.000008 rms=0.001271 Jy/beam
! Combined flux in latest and established models = 0.158066 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 15 components and 0.158066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066828Jy  sigma=1.444277
! Fit after  self-cal, rms=0.066729Jy  sigma=1.441017
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0104133 Jy
! Component: 100  -  total flux cleaned = 0.0135438 Jy
! Total flux subtracted in 100 components = 0.0135438 Jy
! Clean residual min=-0.005543 max=0.006379 Jy/beam
! Clean residual mean=0.000001 rms=0.001159 Jy/beam
! Combined flux in latest and established models = 0.17161 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.17161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.065299Jy  sigma=1.404537
! Fit after  self-cal, rms=0.065148Jy  sigma=1.401070
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00289127 Jy
! Component: 100  -  total flux cleaned = 0.00267113 Jy
! Total flux subtracted in 100 components = 0.00267113 Jy
! Clean residual min=-0.005816 max=0.005600 Jy/beam
! Clean residual mean=0.000000 rms=0.001183 Jy/beam
! Combined flux in latest and established models = 0.174281 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 24 components and 0.174281 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064648Jy  sigma=1.389516
! Fit after  self-cal, rms=0.064556Jy  sigma=1.387784
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9527 mas, bmaj=2.183 mas, bpa=-2.188 degrees
! Estimated noise=0.26084 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000939408 Jy
! Component: 100  -  total flux cleaned = 0.000565167 Jy
! Component: 150  -  total flux cleaned = 0.000570931 Jy
! Component: 200  -  total flux cleaned = 0.000442284 Jy
! Total flux subtracted in 200 components = 0.000442284 Jy
! Clean residual min=-0.003129 max=0.002769 Jy/beam
! Clean residual mean=-0.000001 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.174724 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 31 components and 0.174724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064305Jy  sigma=1.382315
! Fit after  self-cal, rms=0.064226Jy  sigma=1.381136
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9527 x 2.183 at -2.188 degrees (North through East)
! Clean map  min=-0.0028074  max=0.11057 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.03     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        0.99     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.97     KP        0.99     
!   LA        1.01     MK        0.98     NL        1.00     OV        0.97     
!   PT        1.00     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.99     MK        0.94     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.95     KP        1.00     
!   LA        1.00     MK        0.94     NL        1.03     OV        0.98     
!   PT        1.03     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.95     KP        0.99     
!   LA        1.00     MK        0.91     NL        1.02     OV        0.96     
!   PT        1.00     SC        0.95     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.064226Jy  sigma=1.381136
! Fit after  self-cal, rms=0.063471Jy  sigma=1.377136
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9434 mas, bmaj=2.167 mas, bpa=-2.375 degrees
! Estimated noise=0.258108 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000232918 Jy
! Component: 100  -  total flux cleaned = -0.000497644 Jy
! Component: 150  -  total flux cleaned = -0.000713279 Jy
! Component: 200  -  total flux cleaned = -0.000808672 Jy
! Total flux subtracted in 200 components = -0.000808672 Jy
! Clean residual min=-0.002775 max=0.002798 Jy/beam
! Clean residual mean=-0.000001 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.173915 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 38 components and 0.173915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063344Jy  sigma=1.374336
! Fit after  self-cal, rms=0.063314Jy  sigma=1.373422
! Inverting map 
! Added new window around map position (1.6, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142507 Jy
! Component: 100  -  total flux cleaned = 0.00134252 Jy
! Component: 150  -  total flux cleaned = 0.00126836 Jy
! Component: 200  -  total flux cleaned = 0.00120018 Jy
! Total flux subtracted in 200 components = 0.00120018 Jy
! Clean residual min=-0.002649 max=0.002247 Jy/beam
! Clean residual mean=-0.000001 rms=0.000536 Jy/beam
! Combined flux in latest and established models = 0.175115 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.175115 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063103Jy  sigma=1.368465
! Fit after  self-cal, rms=0.063090Jy  sigma=1.368053
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063090Jy  sigma=1.368053
! Fit after  self-cal, rms=0.063002Jy  sigma=1.365453
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9336 mas, bmaj=2.17 mas, bpa=-2.53 degrees
! Estimated noise=0.256625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000950567 Jy
! Component: 100  -  total flux cleaned = 0.00106408 Jy
! Component: 150  -  total flux cleaned = 0.000965714 Jy
! Component: 200  -  total flux cleaned = 0.000968054 Jy
! Total flux subtracted in 200 components = 0.000968054 Jy
! Clean residual min=-0.002303 max=0.002081 Jy/beam
! Clean residual mean=-0.000002 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 0.176083 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 57 components and 0.176083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062914Jy  sigma=1.363115
! Fit after  self-cal, rms=0.062918Jy  sigma=1.362723
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.25949e-05 Jy
! Component: 100  -  total flux cleaned = -6.45332e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106067 Jy
! Component: 200  -  total flux cleaned = -0.000144617 Jy
! Total flux subtracted in 200 components = -0.000144617 Jy
! Clean residual min=-0.002199 max=0.002090 Jy/beam
! Clean residual mean=-0.000002 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.175939 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 65 components and 0.175939 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062857Jy  sigma=1.361138
! Fit after  self-cal, rms=0.062846Jy  sigma=1.360857
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062846Jy  sigma=1.360857
! Fit after  self-cal, rms=0.062715Jy  sigma=1.360736
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9293 mas, bmaj=2.166 mas, bpa=-2.492 degrees
! Estimated noise=0.256032 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000409063 Jy
! Component: 100  -  total flux cleaned = 0.000490774 Jy
! Component: 150  -  total flux cleaned = 0.000563234 Jy
! Component: 200  -  total flux cleaned = 0.000597124 Jy
! Total flux subtracted in 200 components = 0.000597124 Jy
! Clean residual min=-0.002080 max=0.002083 Jy/beam
! Clean residual mean=-0.000002 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.176536 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 72 components and 0.176536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062669Jy  sigma=1.359469
! Fit after  self-cal, rms=0.062661Jy  sigma=1.359230
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51859e-06 Jy
! Component: 100  -  total flux cleaned = 2.25574e-06 Jy
! Component: 150  -  total flux cleaned = 1.69837e-06 Jy
! Component: 200  -  total flux cleaned = 8.04802e-07 Jy
! Total flux subtracted in 200 components = 8.04802e-07 Jy
! Clean residual min=-0.002008 max=0.002071 Jy/beam
! Clean residual mean=-0.000002 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.176536 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 75 components and 0.176536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062627Jy  sigma=1.358300
! Fit after  self-cal, rms=0.062619Jy  sigma=1.358107
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062619Jy  sigma=1.358107
! Fit after  self-cal, rms=0.062540Jy  sigma=1.358064
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=3.877 mas, bpa=2.12 degrees
! Estimated noise=0.323868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000536687 Jy
! Component: 100  -  total flux cleaned = -0.000535888 Jy
! Component: 150  -  total flux cleaned = -0.000517782 Jy
! Component: 200  -  total flux cleaned = -0.000517602 Jy
! Total flux subtracted in 200 components = -0.000517602 Jy
! Clean residual min=-0.001732 max=0.001769 Jy/beam
! Clean residual mean=-0.000002 rms=0.000470 Jy/beam
! Combined flux in latest and established models = 0.176019 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 86 components and 0.176019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062536Jy  sigma=1.357884
! Fit after  self-cal, rms=0.062525Jy  sigma=1.357641
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.0842e-06 Jy
! Component: 100  -  total flux cleaned = -7.1662e-06 Jy
! Component: 150  -  total flux cleaned = -2.08133e-05 Jy
! Component: 200  -  total flux cleaned = -4.44631e-05 Jy
! Total flux subtracted in 200 components = -4.44631e-05 Jy
! Clean residual min=-0.001730 max=0.001774 Jy/beam
! Clean residual mean=-0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.175974 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 95 components and 0.175974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062520Jy  sigma=1.357445
! Fit after  self-cal, rms=0.062510Jy  sigma=1.357232
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=2.162 mas, bpa=-2.422 degrees
! Estimated noise=0.255779 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 2.162 at -2.422 degrees (North through East)
! Clean map  min=-0.0021607  max=0.1076 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6838 mas, bmaj=1.766 mas, bpa=-2.312 degrees
! Estimated noise=0.457439 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0851218 Jy
! Component: 100  -  total flux cleaned = 0.123069 Jy
! Component: 150  -  total flux cleaned = 0.144919 Jy
! Component: 200  -  total flux cleaned = 0.158784 Jy
! Total flux subtracted in 200 components = 0.158784 Jy
! Clean residual min=-0.007085 max=0.007965 Jy/beam
! Clean residual mean=0.000007 rms=0.001329 Jy/beam
! Combined flux in latest and established models = 0.158784 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.158784 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=2.162 mas, bpa=-2.422 degrees
! Estimated noise=0.255779 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107866 Jy
! Component: 100  -  total flux cleaned = 0.0124708 Jy
! Component: 150  -  total flux cleaned = 0.0131428 Jy
! Component: 200  -  total flux cleaned = 0.0137768 Jy
! Total flux subtracted in 200 components = 0.0137768 Jy
! Clean residual min=-0.002688 max=0.002656 Jy/beam
! Clean residual mean=0.000000 rms=0.000572 Jy/beam
! Combined flux in latest and established models = 0.172561 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 31 components and 0.172561 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.187 mas, bmaj=3.877 mas, bpa=2.12 degrees
! Estimated noise=0.323868 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00213144 Jy
! Component: 100  -  total flux cleaned = 0.00258344 Jy
! Component: 150  -  total flux cleaned = 0.00277829 Jy
! Component: 200  -  total flux cleaned = 0.00286162 Jy
! Total flux subtracted in 200 components = 0.00286162 Jy
! Clean residual min=-0.001837 max=0.001820 Jy/beam
! Clean residual mean=-0.000002 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.175423 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.32383e-05 Jy
! Component: 100  -  total flux cleaned = 0.000138711 Jy
! Component: 150  -  total flux cleaned = 0.000196761 Jy
! Component: 200  -  total flux cleaned = 0.000232145 Jy
! Total flux subtracted in 200 components = 0.000232145 Jy
! Clean residual min=-0.001803 max=0.001821 Jy/beam
! Clean residual mean=-0.000002 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.175655 Jy
! Adding 26 model components to the UV plane model.
! The established model now contains 55 components and 0.175655 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9274 mas, bmaj=2.162 mas, bpa=-2.422 degrees
! Estimated noise=0.255779 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.68166e-05 Jy
! Component: 100  -  total flux cleaned = -0.000174889 Jy
! Component: 150  -  total flux cleaned = -0.000243867 Jy
! Component: 200  -  total flux cleaned = -0.000119975 Jy
! Total flux subtracted in 200 components = -0.000119975 Jy
! Clean residual min=-0.002414 max=0.002176 Jy/beam
! Clean residual mean=-0.000001 rms=0.000489 Jy/beam
! Combined flux in latest and established models = 0.175535 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 69 components and 0.175535 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062611Jy  sigma=1.360030
! Fit after  self-cal, rms=0.062534Jy  sigma=1.358379
wmodel /scr/pima/bg219i_uvs/J0123-0923_X_map.mod
! Writing 69 model components to file: /scr/pima/bg219i_uvs/J0123-0923_X_map.mod
wobs /scr/pima/bg219i_uvs/J0123-0923_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0123-0923_X_uvs.fits
wwins /scr/pima/bg219i_uvs/J0123-0923_X_map.win
! wwins: Wrote 3 windows to /scr/pima/bg219i_uvs/J0123-0923_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000804503 Jy
! Component: 100  -  total flux cleaned = -0.00120925 Jy
! Component: 150  -  total flux cleaned = -0.00155642 Jy
! Component: 200  -  total flux cleaned = -0.00181894 Jy
! Component: 250  -  total flux cleaned = -0.0019752 Jy
! Component: 300  -  total flux cleaned = -0.0020661 Jy
! Component: 350  -  total flux cleaned = -0.00218173 Jy
! Component: 400  -  total flux cleaned = -0.00204023 Jy
! Component: 450  -  total flux cleaned = -0.00198661 Jy
! Component: 500  -  total flux cleaned = -0.0020134 Jy
! Component: 550  -  total flux cleaned = -0.00203916 Jy
! Component: 600  -  total flux cleaned = -0.00201447 Jy
! Component: 650  -  total flux cleaned = -0.00198962 Jy
! Component: 700  -  total flux cleaned = -0.00189458 Jy
! Component: 750  -  total flux cleaned = -0.001918 Jy
! Component: 800  -  total flux cleaned = -0.00189518 Jy
! Component: 850  -  total flux cleaned = -0.00196157 Jy
! Component: 900  -  total flux cleaned = -0.00191791 Jy
! Component: 950  -  total flux cleaned = -0.00204586 Jy
! Component: 1000  -  total flux cleaned = -0.00204496 Jy
! Component: 1050  -  total flux cleaned = -0.00200412 Jy
! Component: 1100  -  total flux cleaned = -0.00204471 Jy
! Component: 1150  -  total flux cleaned = -0.00206433 Jy
! Component: 1200  -  total flux cleaned = -0.00208386 Jy
! Component: 1250  -  total flux cleaned = -0.00214077 Jy
! Component: 1300  -  total flux cleaned = -0.00210331 Jy
! Component: 1350  -  total flux cleaned = -0.00215875 Jy
! Component: 1400  -  total flux cleaned = -0.00214077 Jy
! Component: 1450  -  total flux cleaned = -0.00215892 Jy
! Component: 1500  -  total flux cleaned = -0.00221165 Jy
! Component: 1550  -  total flux cleaned = -0.00219452 Jy
! Component: 1600  -  total flux cleaned = -0.00222844 Jy
! Component: 1650  -  total flux cleaned = -0.00227852 Jy
! Component: 1700  -  total flux cleaned = -0.00229479 Jy
! Component: 1750  -  total flux cleaned = -0.00229482 Jy
! Component: 1800  -  total flux cleaned = -0.00231084 Jy
! Component: 1850  -  total flux cleaned = -0.00234205 Jy
! Component: 1900  -  total flux cleaned = -0.00231053 Jy
! Component: 1950  -  total flux cleaned = -0.00229528 Jy
! Component: 2000  -  total flux cleaned = -0.00232565 Jy
! Component: 2050  -  total flux cleaned = -0.0023254 Jy
! Component: 2100  -  total flux cleaned = -0.00231055 Jy
! Component: 2150  -  total flux cleaned = -0.00233986 Jy
! Component: 2200  -  total flux cleaned = -0.0023541 Jy
! Component: 2250  -  total flux cleaned = -0.0023543 Jy
! Component: 2300  -  total flux cleaned = -0.00239636 Jy
! Component: 2350  -  total flux cleaned = -0.00240994 Jy
! Component: 2400  -  total flux cleaned = -0.00241012 Jy
! Component: 2450  -  total flux cleaned = -0.00245049 Jy
! Component: 2500  -  total flux cleaned = -0.00246398 Jy
! Component: 2550  -  total flux cleaned = -0.00246415 Jy
! Component: 2600  -  total flux cleaned = -0.00251626 Jy
! Component: 2650  -  total flux cleaned = -0.00252909 Jy
! Component: 2700  -  total flux cleaned = -0.00252896 Jy
! Component: 2750  -  total flux cleaned = -0.00255412 Jy
! Component: 2800  -  total flux cleaned = -0.00260393 Jy
! Component: 2850  -  total flux cleaned = -0.00260374 Jy
! Component: 2900  -  total flux cleaned = -0.00264027 Jy
! Component: 2950  -  total flux cleaned = -0.0026401 Jy
! Component: 3000  -  total flux cleaned = -0.0026403 Jy
! Component: 3050  -  total flux cleaned = -0.00264006 Jy
! Component: 3100  -  total flux cleaned = -0.00267516 Jy
! Component: 3150  -  total flux cleaned = -0.00267512 Jy
! Component: 3200  -  total flux cleaned = -0.00267527 Jy
! Component: 3250  -  total flux cleaned = -0.00269815 Jy
! Component: 3300  -  total flux cleaned = -0.00267555 Jy
! Component: 3350  -  total flux cleaned = -0.00270936 Jy
! Component: 3400  -  total flux cleaned = -0.00273172 Jy
! Component: 3450  -  total flux cleaned = -0.00277575 Jy
! Component: 3500  -  total flux cleaned = -0.00277579 Jy
! Component: 3550  -  total flux cleaned = -0.00274322 Jy
! Component: 3600  -  total flux cleaned = -0.00277557 Jy
! Component: 3650  -  total flux cleaned = -0.00274362 Jy
! Component: 3700  -  total flux cleaned = -0.00274376 Jy
! Component: 3750  -  total flux cleaned = -0.00277522 Jy
! Component: 3800  -  total flux cleaned = -0.00276475 Jy
! Component: 3850  -  total flux cleaned = -0.00273379 Jy
! Component: 3900  -  total flux cleaned = -0.00277486 Jy
! Component: 3950  -  total flux cleaned = -0.00280534 Jy
! Component: 4000  -  total flux cleaned = -0.00279513 Jy
! Component: 4050  -  total flux cleaned = -0.00279512 Jy
! Total flux subtracted in 4096 components = -0.00281503 Jy
! Clean residual min=-0.000594 max=0.000619 Jy/beam
! Clean residual mean=-0.000000 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.17272 Jy
keep
! Adding 288 model components to the UV plane model.
! The established model now contains 356 components and 0.17272 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0123-0923_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9274 x 2.162 at -2.422 degrees (North through East)
! Clean map  min=-0.0022299  max=0.10767 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0123-0923_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.107672 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000168225 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.468714 0.468714 0.937428 1.87486 3.74971 7.49942 14.9988 29.9977 59.9954
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.107 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  640.049 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0123-0923_X_uvs.log closed on Wed Apr  6 23:26:12 2016