! Started logfile: /scr/pima/bg219i_uvs/J0123-0923_X_dfm.log on Thu May 19 22:55:32 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0123-0923_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0123-0923_X_uva.fits
! AN table 1: 57 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.834698 visibilities/baseline/integration-bin.
! Found source: J0123-0923
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 25692 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0123-0923_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009761Jy  sigma=22.227539
! Fit after  self-cal, rms=0.878872Jy  sigma=19.253914
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6929 mas, bmaj=1.737 mas, bpa=-2.353 degrees
! Estimated noise=0.415167 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0828382 Jy
! Component: 100  -  total flux cleaned = 0.11843 Jy
! Total flux subtracted in 100 components = 0.11843 Jy
! Clean residual min=-0.007938 max=0.018398 Jy/beam
! Clean residual mean=0.000022 rms=0.002027 Jy/beam
! Combined flux in latest and established models = 0.11843 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.11843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080223Jy  sigma=1.676865
! Fit after  self-cal, rms=0.079870Jy  sigma=1.670789
! Inverting map 
! Added new window around map position (0.4, 1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226663 Jy
! Component: 100  -  total flux cleaned = 0.037151 Jy
! Total flux subtracted in 100 components = 0.037151 Jy
! Clean residual min=-0.005302 max=0.008591 Jy/beam
! Clean residual mean=0.000008 rms=0.001110 Jy/beam
! Combined flux in latest and established models = 0.155581 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.155581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.071092Jy  sigma=1.454292
! Fit after  self-cal, rms=0.070999Jy  sigma=1.451168
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0107276 Jy
! Component: 100  -  total flux cleaned = 0.0157556 Jy
! Total flux subtracted in 100 components = 0.0157556 Jy
! Clean residual min=-0.005302 max=0.005592 Jy/beam
! Clean residual mean=0.000002 rms=0.000951 Jy/beam
! Combined flux in latest and established models = 0.171336 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 19 components and 0.171336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069407Jy  sigma=1.411554
! Fit after  self-cal, rms=0.069267Jy  sigma=1.408356
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266773 Jy
! Component: 100  -  total flux cleaned = 0.00267747 Jy
! Total flux subtracted in 100 components = 0.00267747 Jy
! Clean residual min=-0.005397 max=0.004724 Jy/beam
! Clean residual mean=0.000001 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.174014 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 24 components and 0.174014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068820Jy  sigma=1.398360
! Fit after  self-cal, rms=0.068730Jy  sigma=1.396665
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.946 mas, bmaj=2.165 mas, bpa=-2.1 degrees
! Estimated noise=0.207874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011788 Jy
! Component: 100  -  total flux cleaned = 0.00116889 Jy
! Component: 150  -  total flux cleaned = 0.00109319 Jy
! Component: 200  -  total flux cleaned = 0.00103439 Jy
! Total flux subtracted in 200 components = 0.00103439 Jy
! Clean residual min=-0.002924 max=0.002439 Jy/beam
! Clean residual mean=-0.000001 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.175048 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.175048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068513Jy  sigma=1.392001
! Fit after  self-cal, rms=0.068456Jy  sigma=1.391160
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.946 x 2.165 at -2.1 degrees (North through East)
! Clean map  min=-0.0024397  max=0.10965 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.03     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.02     NL        0.99     OV        0.98     
!   PT        1.00     SC        0.96     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.05     HN        0.98     KP        0.99     
!   LA        0.99     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.03     HN        1.02     KP        0.98     
!   LA        0.97     MK        0.97     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.02     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.04     HN        0.97     KP        0.99     
!   LA        1.01     MK        0.99     NL        1.00     OV        0.97     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.01     HN        0.99     KP        1.02     
!   LA        0.95     MK        0.97     NL        1.04     OV        1.01     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.05     HN        1.03     KP        1.00     
!   LA        0.99     MK        0.95     NL        1.00     OV        0.98     
!   PT        1.02     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.04     HN        0.95     KP        1.00     
!   LA        1.00     MK        0.94     NL        1.02     OV        0.98     
!   PT        1.03     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.95     KP        0.99     
!   LA        1.00     MK        0.92     NL        1.01     OV        0.96     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.05     HN        0.96     KP        1.01     
!   LA        0.98     MK        0.93     NL        1.02     OV        0.99     
!   PT        1.02     SC        0.95     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.00     HN        0.94     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.05     OV        0.99     
!   PT        1.00     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.07     HN        0.98     KP        1.01     
!   LA        0.99     MK        0.99     NL        1.00     OV        0.97     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        0.98     KP        0.99     
!   LA        0.97     MK        0.97     NL        1.06     OV        0.99     
!   PT        1.04     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.068456Jy  sigma=1.391160
! Fit after  self-cal, rms=0.067530Jy  sigma=1.387051
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9384 mas, bmaj=2.153 mas, bpa=-2.289 degrees
! Estimated noise=0.205868 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000282622 Jy
! Component: 100  -  total flux cleaned = -0.000475694 Jy
! Component: 150  -  total flux cleaned = -0.000686948 Jy
! Component: 200  -  total flux cleaned = -0.000821941 Jy
! Total flux subtracted in 200 components = -0.000821941 Jy
! Clean residual min=-0.002535 max=0.002356 Jy/beam
! Clean residual mean=-0.000001 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.174226 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.174226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067424Jy  sigma=1.384763
! Fit after  self-cal, rms=0.067380Jy  sigma=1.383841
! Inverting map 
! Added new window around map position (1.6, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101609 Jy
! Component: 100  -  total flux cleaned = 0.000850977 Jy
! Component: 150  -  total flux cleaned = 0.000779837 Jy
! Component: 200  -  total flux cleaned = 0.000780123 Jy
! Total flux subtracted in 200 components = 0.000780123 Jy
! Clean residual min=-0.002346 max=0.002050 Jy/beam
! Clean residual mean=-0.000002 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.175006 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 45 components and 0.175006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067206Jy  sigma=1.380032
! Fit after  self-cal, rms=0.067188Jy  sigma=1.379659
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067188Jy  sigma=1.379659
! Fit after  self-cal, rms=0.067078Jy  sigma=1.377024
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9293 mas, bmaj=2.153 mas, bpa=-2.359 degrees
! Estimated noise=0.204903 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000956943 Jy
! Component: 100  -  total flux cleaned = 0.00102001 Jy
! Component: 150  -  total flux cleaned = 0.00107181 Jy
! Component: 200  -  total flux cleaned = 0.00107119 Jy
! Total flux subtracted in 200 components = 0.00107119 Jy
! Clean residual min=-0.002167 max=0.001975 Jy/beam
! Clean residual mean=-0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.176077 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 52 components and 0.176078 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066987Jy  sigma=1.374866
! Fit after  self-cal, rms=0.066989Jy  sigma=1.374514
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.32498e-05 Jy
! Component: 100  -  total flux cleaned = 1.99241e-05 Jy
! Component: 150  -  total flux cleaned = -2.30844e-05 Jy
! Component: 200  -  total flux cleaned = -6.2549e-05 Jy
! Total flux subtracted in 200 components = -6.2549e-05 Jy
! Clean residual min=-0.002063 max=0.001952 Jy/beam
! Clean residual mean=-0.000002 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.176015 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 56 components and 0.176015 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066927Jy  sigma=1.373057
! Fit after  self-cal, rms=0.066916Jy  sigma=1.372801
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066916Jy  sigma=1.372801
! Fit after  self-cal, rms=0.066621Jy  sigma=1.372614
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9231 mas, bmaj=2.146 mas, bpa=-2.28 degrees
! Estimated noise=0.204107 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00049256 Jy
! Component: 100  -  total flux cleaned = 0.000619345 Jy
! Component: 150  -  total flux cleaned = 0.000695871 Jy
! Component: 200  -  total flux cleaned = 0.000663674 Jy
! Total flux subtracted in 200 components = 0.000663674 Jy
! Clean residual min=-0.002034 max=0.001932 Jy/beam
! Clean residual mean=-0.000002 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.176679 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 61 components and 0.176679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066572Jy  sigma=1.371397
! Fit after  self-cal, rms=0.066566Jy  sigma=1.371169
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.13394e-05 Jy
! Component: 100  -  total flux cleaned = -2.11257e-05 Jy
! Component: 150  -  total flux cleaned = -2.0459e-05 Jy
! Component: 200  -  total flux cleaned = -2.08273e-05 Jy
! Total flux subtracted in 200 components = -2.08273e-05 Jy
! Clean residual min=-0.001958 max=0.001900 Jy/beam
! Clean residual mean=-0.000002 rms=0.000387 Jy/beam
! Combined flux in latest and established models = 0.176658 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 65 components and 0.176658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066532Jy  sigma=1.370299
! Fit after  self-cal, rms=0.066525Jy  sigma=1.370119
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066525Jy  sigma=1.370119
! Fit after  self-cal, rms=0.066362Jy  sigma=1.370052
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.866 mas, bpa=2.175 degrees
! Estimated noise=0.258034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389873 Jy
! Component: 100  -  total flux cleaned = -0.000415083 Jy
! Component: 150  -  total flux cleaned = -0.000394423 Jy
! Component: 200  -  total flux cleaned = -0.000379089 Jy
! Total flux subtracted in 200 components = -0.000379089 Jy
! Clean residual min=-0.001622 max=0.001718 Jy/beam
! Clean residual mean=-0.000003 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.176279 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 81 components and 0.176279 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066357Jy  sigma=1.369845
! Fit after  self-cal, rms=0.066348Jy  sigma=1.369614
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.8092e-06 Jy
! Component: 100  -  total flux cleaned = 1.13375e-05 Jy
! Component: 150  -  total flux cleaned = 8.70745e-06 Jy
! Component: 200  -  total flux cleaned = 8.63276e-06 Jy
! Total flux subtracted in 200 components = 8.63276e-06 Jy
! Clean residual min=-0.001614 max=0.001723 Jy/beam
! Clean residual mean=-0.000003 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.176287 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 87 components and 0.176287 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066342Jy  sigma=1.369435
! Fit after  self-cal, rms=0.066332Jy  sigma=1.369216
! Inverting map 
! Added new window around map position (-1, -33.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000664245 Jy
! Component: 100  -  total flux cleaned = 0.000625522 Jy
! Component: 150  -  total flux cleaned = 0.000477912 Jy
! Component: 200  -  total flux cleaned = 0.000382807 Jy
! Total flux subtracted in 200 components = 0.000382807 Jy
! Clean residual min=-0.001668 max=0.001446 Jy/beam
! Clean residual mean=-0.000003 rms=0.000357 Jy/beam
! Combined flux in latest and established models = 0.17667 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 115 components and 0.17667 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066286Jy  sigma=1.368208
! Fit after  self-cal, rms=0.066280Jy  sigma=1.368120
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9196 mas, bmaj=2.14 mas, bpa=-2.196 degrees
! Estimated noise=0.203668 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9196 x 2.14 at -2.196 degrees (North through East)
! Clean map  min=-0.0016795  max=0.10662 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6768 mas, bmaj=1.727 mas, bpa=-2.196 degrees
! Estimated noise=0.397754 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0835319 Jy
! Component: 100  -  total flux cleaned = 0.120734 Jy
! Component: 150  -  total flux cleaned = 0.142547 Jy
! Component: 200  -  total flux cleaned = 0.156727 Jy
! Total flux subtracted in 200 components = 0.156727 Jy
! Clean residual min=-0.007415 max=0.007731 Jy/beam
! Clean residual mean=0.000007 rms=0.001141 Jy/beam
! Combined flux in latest and established models = 0.156727 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.156727 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9196 mas, bmaj=2.14 mas, bpa=-2.196 degrees
! Estimated noise=0.203668 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0119103 Jy
! Component: 100  -  total flux cleaned = 0.0148606 Jy
! Component: 150  -  total flux cleaned = 0.0157345 Jy
! Component: 200  -  total flux cleaned = 0.0162528 Jy
! Total flux subtracted in 200 components = 0.0162528 Jy
! Clean residual min=-0.002629 max=0.002370 Jy/beam
! Clean residual mean=0.000000 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.17298 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 25 components and 0.17298 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=3.866 mas, bpa=2.175 degrees
! Estimated noise=0.258034 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00230238 Jy
! Component: 100  -  total flux cleaned = 0.00248524 Jy
! Component: 150  -  total flux cleaned = 0.00285526 Jy
! Component: 200  -  total flux cleaned = 0.00308642 Jy
! Total flux subtracted in 200 components = 0.00308642 Jy
! Clean residual min=-0.001673 max=0.001505 Jy/beam
! Clean residual mean=-0.000002 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.176066 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000168357 Jy
! Component: 100  -  total flux cleaned = 0.000226403 Jy
! Component: 150  -  total flux cleaned = 0.000333156 Jy
! Component: 200  -  total flux cleaned = 0.000406354 Jy
! Total flux subtracted in 200 components = 0.000406354 Jy
! Clean residual min=-0.001617 max=0.001410 Jy/beam
! Clean residual mean=-0.000003 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.176473 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 67 components and 0.176473 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9196 mas, bmaj=2.14 mas, bpa=-2.196 degrees
! Estimated noise=0.203668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000463459 Jy
! Component: 100  -  total flux cleaned = -0.000541555 Jy
! Component: 150  -  total flux cleaned = -0.000471748 Jy
! Component: 200  -  total flux cleaned = -0.000474821 Jy
! Total flux subtracted in 200 components = -0.000474821 Jy
! Clean residual min=-0.002222 max=0.001865 Jy/beam
! Clean residual mean=-0.000001 rms=0.000376 Jy/beam
! Combined flux in latest and established models = 0.175998 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 90 components and 0.175998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066338Jy  sigma=1.370208
! Fit after  self-cal, rms=0.066281Jy  sigma=1.368874
wmodel /J0123-0923_X_map.mod
! wmodel: Unable to open new model file: /J0123-0923_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0123-0923_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9196 x 2.14 at -2.196 degrees (North through East)
! Clean map  min=-0.0017931  max=0.10657 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0123-0923_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.106567 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000358601 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.00951 1.00951 2.01902 4.03803 8.07606 16.1521 32.3043 64.6085
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.106 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  297.174 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0123-0923_X_dfm.log closed on Thu May 19 22:55:36 2016