! Started logfile: /scr/pima/bg219i_uvs/J0111-1422_S_uvs.log on Wed Apr  6 22:46:55 2016
obs /scr/pima/bg219i_uvs/J0111-1422_S_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0111-1422_S_uva.fits
! AN table 1: 61 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.428571 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0111-1422
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 2196 visibilities.
select rr, 1,2,3,4,6,7,8 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219i_uvs/J0111-1422_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 175 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.009555Jy  sigma=20.706678
! Fit after  self-cal, rms=0.946061Jy  sigma=19.145950
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=13.53 mas, bmaj=24.02 mas, bpa=28.88 degrees
! Estimated noise=1.07375 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.043486 Jy
! Component: 100  -  total flux cleaned = 0.0507513 Jy
! Total flux subtracted in 100 components = 0.0507513 Jy
! Clean residual min=-0.003639 max=0.003632 Jy/beam
! Clean residual mean=-0.000033 rms=0.001302 Jy/beam
! Combined flux in latest and established models = 0.0507513 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0507513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054064Jy  sigma=1.052375
! Fit after  self-cal, rms=0.052474Jy  sigma=1.023683
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.97 mas, bmaj=25.72 mas, bpa=27.81 degrees
! Estimated noise=0.928874 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000322825 Jy
! Component: 100  -  total flux cleaned = 0.00136027 Jy
! Component: 150  -  total flux cleaned = 0.00196789 Jy
! Component: 200  -  total flux cleaned = 0.00190932 Jy
! Total flux subtracted in 200 components = 0.00190932 Jy
! Clean residual min=-0.000961 max=0.000953 Jy/beam
! Clean residual mean=-0.000005 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.0526607 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 81 components and 0.0526607 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051948Jy  sigma=1.011872
! Fit after  self-cal, rms=0.051958Jy  sigma=1.010254
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.97 x 25.72 at 27.81 degrees (North through East)
! Clean map  min=-0.0035005  max=0.053295 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.01     KP        1.08     LA        0.98     
!   NL        1.00*    OV        1.11     PT        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.94     KP        0.94     LA        0.99     
!   NL        1.00*    OV        1.01     PT        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.95     KP        1.01     LA        0.95     
!   NL        1.00*    OV        0.98     PT        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     KP        1.06     LA        1.05     
!   NL        1.00*    OV        0.95     PT        1.01     
! 
! 
! Fit before self-cal, rms=0.051958Jy  sigma=1.010254
! Fit after  self-cal, rms=0.051490Jy  sigma=1.007553
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=14.99 mas, bmaj=25.57 mas, bpa=28.61 degrees
! Estimated noise=0.918065 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.31579e-05 Jy
! Component: 100  -  total flux cleaned = 0.000829658 Jy
! Component: 150  -  total flux cleaned = 0.00124953 Jy
! Component: 200  -  total flux cleaned = 0.0015652 Jy
! Total flux subtracted in 200 components = 0.0015652 Jy
! Clean residual min=-0.000500 max=0.000497 Jy/beam
! Clean residual mean=-0.000008 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0542259 Jy
! Performing phase self-cal
! Adding 93 model components to the UV plane model.
! The established model now contains 171 components and 0.0542259 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051411Jy  sigma=1.005654
! Fit after  self-cal, rms=0.051457Jy  sigma=1.003480
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051457Jy  sigma=1.003480
! Fit after  self-cal, rms=0.051467Jy  sigma=1.002231
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.96 mas, bmaj=25.57 mas, bpa=28.56 degrees
! Estimated noise=0.917375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000102868 Jy
! Component: 100  -  total flux cleaned = 0.000331479 Jy
! Component: 150  -  total flux cleaned = 0.000424618 Jy
! Component: 200  -  total flux cleaned = 0.000507805 Jy
! Total flux subtracted in 200 components = 0.000507805 Jy
! Clean residual min=-0.000435 max=0.000438 Jy/beam
! Clean residual mean=-0.000006 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0547337 Jy
selfcal
! Performing phase self-cal
! Adding 92 model components to the UV plane model.
! The established model now contains 259 components and 0.0547337 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051413Jy  sigma=1.001131
! Fit after  self-cal, rms=0.051454Jy  sigma=1.000693
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000172433 Jy
! Component: 100  -  total flux cleaned = 0.000199963 Jy
! Component: 150  -  total flux cleaned = 0.000199094 Jy
! Component: 200  -  total flux cleaned = 0.000176054 Jy
! Total flux subtracted in 200 components = 0.000176054 Jy
! Clean residual min=-0.000371 max=0.000369 Jy/beam
! Clean residual mean=-0.000004 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0549097 Jy
! Performing phase self-cal
! Adding 86 model components to the UV plane model.
! The established model now contains 338 components and 0.0549097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051425Jy  sigma=1.000120
! Fit after  self-cal, rms=0.051408Jy  sigma=0.999581
! Inverting map 
! Added new window around map position (70.5, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000552079 Jy
! Component: 100  -  total flux cleaned = 0.000534889 Jy
! Component: 150  -  total flux cleaned = 0.000613244 Jy
! Component: 200  -  total flux cleaned = 0.000648408 Jy
! Total flux subtracted in 200 components = 0.000648408 Jy
! Clean residual min=-0.000600 max=0.000533 Jy/beam
! Clean residual mean=-0.000005 rms=0.000187 Jy/beam
! Combined flux in latest and established models = 0.0555581 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 381 components and 0.0555581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051397Jy  sigma=0.999320
! Fit after  self-cal, rms=0.051405Jy  sigma=0.999255
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051405Jy  sigma=0.999255
! Fit after  self-cal, rms=0.051016Jy  sigma=1.000236
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=14.96 mas, bmaj=25.6 mas, bpa=28.36 degrees
! Estimated noise=0.909027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000212163 Jy
! Component: 100  -  total flux cleaned = 0.000271995 Jy
! Component: 150  -  total flux cleaned = 0.000331037 Jy
! Component: 200  -  total flux cleaned = 0.000413655 Jy
! Total flux subtracted in 200 components = 0.000413655 Jy
! Clean residual min=-0.000845 max=0.000988 Jy/beam
! Clean residual mean=-0.000003 rms=0.000239 Jy/beam
! Combined flux in latest and established models = 0.0559718 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 430 components and 0.0559718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050987Jy  sigma=0.999612
! Fit after  self-cal, rms=0.051034Jy  sigma=0.998941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000272878 Jy
! Component: 100  -  total flux cleaned = 0.000291983 Jy
! Component: 150  -  total flux cleaned = 0.000264172 Jy
! Component: 200  -  total flux cleaned = 0.000241902 Jy
! Total flux subtracted in 200 components = 0.000241902 Jy
! Clean residual min=-0.000687 max=0.000680 Jy/beam
! Clean residual mean=-0.000004 rms=0.000209 Jy/beam
! Combined flux in latest and established models = 0.0562137 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 474 components and 0.0562137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051022Jy  sigma=0.998746
! Fit after  self-cal, rms=0.051026Jy  sigma=0.998700
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051026Jy  sigma=0.998700
! Fit after  self-cal, rms=0.051065Jy  sigma=0.999834
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.45 mas, bmaj=26.09 mas, bpa=27.19 degrees
! Estimated noise=0.908784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00021402 Jy
! Component: 100  -  total flux cleaned = 0.000208378 Jy
! Component: 150  -  total flux cleaned = 0.000209245 Jy
! Component: 200  -  total flux cleaned = 0.000225799 Jy
! Total flux subtracted in 200 components = 0.000225799 Jy
! Clean residual min=-0.000865 max=0.000895 Jy/beam
! Clean residual mean=-0.000004 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0564395 Jy
selfcal
! Performing phase self-cal
! Adding 59 model components to the UV plane model.
! The established model now contains 521 components and 0.0564395 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051043Jy  sigma=0.999330
! Fit after  self-cal, rms=0.051091Jy  sigma=0.999183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.43179e-05 Jy
! Component: 100  -  total flux cleaned = 3.40318e-07 Jy
! Component: 150  -  total flux cleaned = 2.86585e-07 Jy
! Component: 200  -  total flux cleaned = 8.33482e-06 Jy
! Total flux subtracted in 200 components = 8.33482e-06 Jy
! Clean residual min=-0.000727 max=0.000706 Jy/beam
! Clean residual mean=-0.000004 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.0564478 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 562 components and 0.0564478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.051085Jy  sigma=0.999078
! Fit after  self-cal, rms=0.051090Jy  sigma=0.999055
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=14.98 mas, bmaj=25.62 mas, bpa=28.15 degrees
! Estimated noise=0.90585 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.98 x 25.62 at 28.15 degrees (North through East)
! Clean map  min=-0.0028648  max=0.052437 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=13.55 mas, bmaj=23.84 mas, bpa=29.6 degrees
! Estimated noise=1.04069 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00863487 Jy
! Component: 100  -  total flux cleaned = 0.00258319 Jy
! Component: 150  -  total flux cleaned = -4.5354e-05 Jy
! Component: 200  -  total flux cleaned = -0.000376234 Jy
! Total flux subtracted in 200 components = -0.000376234 Jy
! Clean residual min=-0.018101 max=0.032912 Jy/beam
! Clean residual mean=0.000088 rms=0.007457 Jy/beam
! Combined flux in latest and established models = -0.000376233 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 55 model components to the UV plane model.
! The established model now contains 55 components and -0.000376233 Jy
! Inverting map and beam 
! Estimated beam: bmin=14.98 mas, bmaj=25.62 mas, bpa=28.15 degrees
! Estimated noise=0.90585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129633 Jy
! Component: 100  -  total flux cleaned = -0.00360947 Jy
! Component: 150  -  total flux cleaned = -0.00416137 Jy
! Component: 200  -  total flux cleaned = -0.00490636 Jy
! Total flux subtracted in 200 components = -0.00490636 Jy
! Clean residual min=-0.019305 max=0.029460 Jy/beam
! Clean residual mean=0.000180 rms=0.007419 Jy/beam
! Combined flux in latest and established models = -0.00528259 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 89 components and -0.00528259 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=15.45 mas, bmaj=26.09 mas, bpa=27.19 degrees
! Estimated noise=0.908784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.4966e-05 Jy
! Component: 100  -  total flux cleaned = 2.72045e-05 Jy
! Component: 150  -  total flux cleaned = -0.000179094 Jy
! Component: 200  -  total flux cleaned = -0.000380413 Jy
! Total flux subtracted in 200 components = -0.000380413 Jy
! Clean residual min=-0.019140 max=0.028066 Jy/beam
! Clean residual mean=0.000184 rms=0.007292 Jy/beam
! Combined flux in latest and established models = -0.005663 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000375919 Jy
! Component: 100  -  total flux cleaned = -0.000734753 Jy
! Component: 150  -  total flux cleaned = -0.000737209 Jy
! Component: 200  -  total flux cleaned = -0.000572978 Jy
! Total flux subtracted in 200 components = -0.000572978 Jy
! Clean residual min=-0.019035 max=0.026525 Jy/beam
! Clean residual mean=0.000181 rms=0.007020 Jy/beam
! Combined flux in latest and established models = -0.00623598 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 155 components and -0.00623598 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=14.98 mas, bmaj=25.62 mas, bpa=28.15 degrees
! Estimated noise=0.90585 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000165926 Jy
! Component: 100  -  total flux cleaned = -0.000322569 Jy
! Component: 150  -  total flux cleaned = -0.000322736 Jy
! Component: 200  -  total flux cleaned = -0.000322358 Jy
! Total flux subtracted in 200 components = -0.000322358 Jy
! Clean residual min=-0.018155 max=0.024796 Jy/beam
! Clean residual mean=0.000159 rms=0.006548 Jy/beam
! Combined flux in latest and established models = -0.00655834 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 174 components and -0.00655834 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060817Jy  sigma=1.211383
! Fit after  self-cal, rms=0.056248Jy  sigma=1.116337
wmodel /scr/pima/bg219i_uvs/J0111-1422_S_map.mod
! Writing 174 model components to file: /scr/pima/bg219i_uvs/J0111-1422_S_map.mod
wobs /scr/pima/bg219i_uvs/J0111-1422_S_uvs.fits
! Writing UV FITS file: /scr/pima/bg219i_uvs/J0111-1422_S_uvs.fits
wwins /scr/pima/bg219i_uvs/J0111-1422_S_map.win
! wwins: Wrote 1 windows to /scr/pima/bg219i_uvs/J0111-1422_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00464896 Jy
! Component: 100  -  total flux cleaned = 0.00561937 Jy
! Component: 150  -  total flux cleaned = 0.0063575 Jy
! Component: 200  -  total flux cleaned = 0.00737439 Jy
! Component: 250  -  total flux cleaned = 0.00813584 Jy
! Component: 300  -  total flux cleaned = 0.00920874 Jy
! Component: 350  -  total flux cleaned = 0.0103357 Jy
! Component: 400  -  total flux cleaned = 0.0115002 Jy
! Component: 450  -  total flux cleaned = 0.0125426 Jy
! Component: 500  -  total flux cleaned = 0.0132132 Jy
! Component: 550  -  total flux cleaned = 0.0137816 Jy
! Component: 600  -  total flux cleaned = 0.0142996 Jy
! Component: 650  -  total flux cleaned = 0.0146084 Jy
! Component: 700  -  total flux cleaned = 0.014705 Jy
! Component: 750  -  total flux cleaned = 0.0147667 Jy
! Component: 800  -  total flux cleaned = 0.0147966 Jy
! Component: 850  -  total flux cleaned = 0.0147094 Jy
! Component: 900  -  total flux cleaned = 0.0146526 Jy
! Component: 950  -  total flux cleaned = 0.0145968 Jy
! Component: 1000  -  total flux cleaned = 0.0145166 Jy
! Component: 1050  -  total flux cleaned = 0.0144121 Jy
! Component: 1100  -  total flux cleaned = 0.0143354 Jy
! Component: 1150  -  total flux cleaned = 0.0142358 Jy
! Component: 1200  -  total flux cleaned = 0.0141373 Jy
! Component: 1250  -  total flux cleaned = 0.014113 Jy
! Component: 1300  -  total flux cleaned = 0.0142095 Jy
! Component: 1350  -  total flux cleaned = 0.0142574 Jy
! Component: 1400  -  total flux cleaned = 0.0143296 Jy
! Component: 1450  -  total flux cleaned = 0.0144253 Jy
! Component: 1500  -  total flux cleaned = 0.0145208 Jy
! Component: 1550  -  total flux cleaned = 0.0146164 Jy
! Component: 1600  -  total flux cleaned = 0.0146876 Jy
! Component: 1650  -  total flux cleaned = 0.0147591 Jy
! Component: 1700  -  total flux cleaned = 0.0147354 Jy
! Component: 1750  -  total flux cleaned = 0.0147355 Jy
! Component: 1800  -  total flux cleaned = 0.0147118 Jy
! Component: 1850  -  total flux cleaned = 0.0147594 Jy
! Component: 1900  -  total flux cleaned = 0.0147595 Jy
! Component: 1950  -  total flux cleaned = 0.0147597 Jy
! Component: 2000  -  total flux cleaned = 0.0147113 Jy
! Component: 2050  -  total flux cleaned = 0.0147115 Jy
! Component: 2100  -  total flux cleaned = 0.0146866 Jy
! Component: 2150  -  total flux cleaned = 0.0146616 Jy
! Component: 2200  -  total flux cleaned = 0.0146616 Jy
! Component: 2250  -  total flux cleaned = 0.0146363 Jy
! Component: 2300  -  total flux cleaned = 0.0146106 Jy
! Component: 2350  -  total flux cleaned = 0.0146105 Jy
! Component: 2400  -  total flux cleaned = 0.0146625 Jy
! Component: 2450  -  total flux cleaned = 0.0146626 Jy
! Component: 2500  -  total flux cleaned = 0.0147417 Jy
! Component: 2550  -  total flux cleaned = 0.0147681 Jy
! Component: 2600  -  total flux cleaned = 0.0148221 Jy
! Component: 2650  -  total flux cleaned = 0.0148763 Jy
! Component: 2700  -  total flux cleaned = 0.0149036 Jy
! Component: 2750  -  total flux cleaned = 0.0149313 Jy
! Component: 2800  -  total flux cleaned = 0.0150156 Jy
! Component: 2850  -  total flux cleaned = 0.0149865 Jy
! Component: 2900  -  total flux cleaned = 0.0150725 Jy
! Component: 2950  -  total flux cleaned = 0.0150724 Jy
! Component: 3000  -  total flux cleaned = 0.0151314 Jy
! Component: 3050  -  total flux cleaned = 0.0151911 Jy
! Component: 3100  -  total flux cleaned = 0.0152212 Jy
! Component: 3150  -  total flux cleaned = 0.0152827 Jy
! Component: 3200  -  total flux cleaned = 0.0153142 Jy
! Component: 3250  -  total flux cleaned = 0.0153458 Jy
! Component: 3300  -  total flux cleaned = 0.0154098 Jy
! Component: 3350  -  total flux cleaned = 0.0154426 Jy
! Component: 3400  -  total flux cleaned = 0.0154756 Jy
! Component: 3450  -  total flux cleaned = 0.0156092 Jy
! Component: 3500  -  total flux cleaned = 0.0156095 Jy
! Component: 3550  -  total flux cleaned = 0.0157123 Jy
! Component: 3600  -  total flux cleaned = 0.0157466 Jy
! Component: 3650  -  total flux cleaned = 0.0158511 Jy
! Component: 3700  -  total flux cleaned = 0.0159579 Jy
! Component: 3750  -  total flux cleaned = 0.0161391 Jy
! Component: 3800  -  total flux cleaned = 0.0161757 Jy
! Component: 3850  -  total flux cleaned = 0.0162867 Jy
! Component: 3900  -  total flux cleaned = 0.0163994 Jy
! Component: 3950  -  total flux cleaned = 0.01659 Jy
! Component: 4000  -  total flux cleaned = 0.0167067 Jy
! Component: 4050  -  total flux cleaned = 0.0169038 Jy
! Total flux subtracted in 4096 components = 0.0169838 Jy
! Clean residual min=-0.002440 max=0.002474 Jy/beam
! Clean residual mean=0.000074 rms=0.000843 Jy/beam
! Combined flux in latest and established models = 0.0104254 Jy
keep
! Adding 402 model components to the UV plane model.
! The established model now contains 576 components and 0.0104254 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219i_uvs/J0111-1422_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 14.98 x 25.62 at 28.15 degrees (North through East)
! Clean map  min=-0.02207  max=0.020144 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0111-1422_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0201442 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00107241 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -15.9711 15.9711 31.9422 63.8843
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0032 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.02 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  18.783 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0111-1422_S_uvs.log closed on Wed Apr  6 22:46:59 2016