! Started logfile: /scr/pima/bg219i_uvs/J0106-4034_X_dfm.log on Thu May 19 22:54:37 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0106-4034_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0106-4034_X_uva.fits
! AN table 1: 7 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.714286 visibilities/baseline/integration-bin.
! Found source: J0106-4034
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 600 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0106-4034_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 13 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.425466Jy  sigma=16.227075
! Fit after  self-cal, rms=0.468654Jy  sigma=6.552522
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.978 mas, bmaj=32.57 mas, bpa=19.74 degrees
! Estimated noise=3.22531 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.714667 Jy
! Component: 100  -  total flux cleaned = 0.996767 Jy
! Total flux subtracted in 100 components = 0.996767 Jy
! Clean residual min=-0.054958 max=0.114006 Jy/beam
! Clean residual mean=-0.001948 rms=0.033080 Jy/beam
! Combined flux in latest and established models = 0.996767 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.996767 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.212899Jy  sigma=2.407500
! Fit after  self-cal, rms=0.211930Jy  sigma=2.395596
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=36.46 mas, bpa=19.35 degrees
! Estimated noise=2.8981 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.141882 Jy
! Component: 100  -  total flux cleaned = 0.199295 Jy
! Component: 150  -  total flux cleaned = 0.215424 Jy
! Component: 200  -  total flux cleaned = 0.214711 Jy
! Total flux subtracted in 200 components = 0.214711 Jy
! Clean residual min=-0.014848 max=0.015001 Jy/beam
! Clean residual mean=-0.000018 rms=0.006675 Jy/beam
! Combined flux in latest and established models = 1.21148 Jy
! Performing phase self-cal
! Adding 82 model components to the UV plane model.
! The established model now contains 89 components and 1.21148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084722Jy  sigma=0.983142
! Fit after  self-cal, rms=0.084572Jy  sigma=0.981456
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.037 x 36.46 at 19.35 degrees (North through East)
! Clean map  min=-0.023039  max=0.60248 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.97     LA        1.15     OV        0.97     
!   PT        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.03     KP        0.99     LA        1.01     OV        1.00     
!   PT        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     KP        0.98     LA        1.00     OV        1.01     
!   PT        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        0.97     LA        1.10     OV        0.99     
!   PT        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.084572Jy  sigma=0.981456
! Fit after  self-cal, rms=0.083851Jy  sigma=0.967168
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=36.56 mas, bpa=19.35 degrees
! Estimated noise=2.9083 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000275738 Jy
! Component: 100  -  total flux cleaned = -0.00420619 Jy
! Component: 150  -  total flux cleaned = -0.00540024 Jy
! Component: 200  -  total flux cleaned = -0.0034889 Jy
! Total flux subtracted in 200 components = -0.0034889 Jy
! Clean residual min=-0.006465 max=0.006434 Jy/beam
! Clean residual mean=0.000103 rms=0.002159 Jy/beam
! Combined flux in latest and established models = 1.20799 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 139 components and 1.20799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080273Jy  sigma=0.920953
! Fit after  self-cal, rms=0.080210Jy  sigma=0.919157
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.080210Jy  sigma=0.919157
! Fit after  self-cal, rms=0.079580Jy  sigma=0.914354
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=36.5 mas, bpa=19.35 degrees
! Estimated noise=2.90547 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00394667 Jy
! Component: 100  -  total flux cleaned = -0.00559511 Jy
! Component: 150  -  total flux cleaned = -0.00631007 Jy
! Component: 200  -  total flux cleaned = -0.00772877 Jy
! Total flux subtracted in 200 components = -0.00772877 Jy
! Clean residual min=-0.003952 max=0.004012 Jy/beam
! Clean residual mean=0.000114 rms=0.001524 Jy/beam
! Combined flux in latest and established models = 1.20026 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 215 components and 1.20026 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.078165Jy  sigma=0.896818
! Fit after  self-cal, rms=0.078079Jy  sigma=0.895767
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000994009 Jy
! Component: 100  -  total flux cleaned = 0.00208307 Jy
! Component: 150  -  total flux cleaned = 0.0040558 Jy
! Component: 200  -  total flux cleaned = 0.00608323 Jy
! Total flux subtracted in 200 components = 0.00608323 Jy
! Clean residual min=-0.003093 max=0.003108 Jy/beam
! Clean residual mean=0.000090 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 1.20634 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 263 components and 1.20634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077383Jy  sigma=0.889090
! Fit after  self-cal, rms=0.077374Jy  sigma=0.888954
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077374Jy  sigma=0.888954
! Fit after  self-cal, rms=0.077433Jy  sigma=0.887932
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.038 mas, bmaj=36.52 mas, bpa=19.35 degrees
! Estimated noise=2.91141 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000129345 Jy
! Component: 100  -  total flux cleaned = 0.00125261 Jy
! Component: 150  -  total flux cleaned = 0.00232155 Jy
! Component: 200  -  total flux cleaned = 0.00280392 Jy
! Total flux subtracted in 200 components = 0.00280392 Jy
! Clean residual min=-0.002757 max=0.002788 Jy/beam
! Clean residual mean=0.000062 rms=0.001027 Jy/beam
! Combined flux in latest and established models = 1.20915 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 307 components and 1.20915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077004Jy  sigma=0.882647
! Fit after  self-cal, rms=0.076952Jy  sigma=0.882128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000948336 Jy
! Component: 100  -  total flux cleaned = 0.00162952 Jy
! Component: 150  -  total flux cleaned = 0.00190324 Jy
! Component: 200  -  total flux cleaned = 0.00176296 Jy
! Total flux subtracted in 200 components = 0.00176296 Jy
! Clean residual min=-0.002373 max=0.002368 Jy/beam
! Clean residual mean=0.000042 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 1.21091 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 363 components and 1.21091 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076609Jy  sigma=0.878570
! Fit after  self-cal, rms=0.076572Jy  sigma=0.878264
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076572Jy  sigma=0.878264
! Fit after  self-cal, rms=0.076881Jy  sigma=0.878026
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.245 mas, bmaj=35.62 mas, bpa=19.31 degrees
! Estimated noise=2.94787 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00110252 Jy
! Component: 100  -  total flux cleaned = 0.00132301 Jy
! Component: 150  -  total flux cleaned = 0.0009944 Jy
! Component: 200  -  total flux cleaned = 0.000653941 Jy
! Total flux subtracted in 200 components = 0.000653941 Jy
! Clean residual min=-0.001916 max=0.001975 Jy/beam
! Clean residual mean=0.000019 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 1.21156 Jy
selfcal
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 402 components and 1.21156 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076655Jy  sigma=0.874666
! Fit after  self-cal, rms=0.076664Jy  sigma=0.874472
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.88711e-06 Jy
! Component: 100  -  total flux cleaned = 0.000512473 Jy
! Component: 150  -  total flux cleaned = 0.000940947 Jy
! Component: 200  -  total flux cleaned = 0.00126853 Jy
! Total flux subtracted in 200 components = 0.00126853 Jy
! Clean residual min=-0.001855 max=0.001862 Jy/beam
! Clean residual mean=0.000040 rms=0.000751 Jy/beam
! Combined flux in latest and established models = 1.21283 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 431 components and 1.21283 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076434Jy  sigma=0.872168
! Fit after  self-cal, rms=0.076436Jy  sigma=0.871983
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.037 mas, bmaj=36.56 mas, bpa=19.36 degrees
! Estimated noise=2.91885 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.037 x 36.56 at 19.36 degrees (North through East)
! Clean map  min=-0.019206  max=0.59156 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.076436Jy  sigma=0.871983
! Fit after  self-cal, rms=0.064999Jy  sigma=0.749738
! Inverting map and beam 
! Estimated beam: bmin=3.029 mas, bmaj=36.64 mas, bpa=19.37 degrees
! Estimated noise=2.91769 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00193097 Jy
! Component: 100  -  total flux cleaned = -0.00229237 Jy
! Component: 150  -  total flux cleaned = -0.00188589 Jy
! Component: 200  -  total flux cleaned = -0.00117941 Jy
! Total flux subtracted in 200 components = -0.00117941 Jy
! Clean residual min=-0.001702 max=0.001713 Jy/beam
! Clean residual mean=0.000038 rms=0.000730 Jy/beam
! Combined flux in latest and established models = 1.21165 Jy
! Performing phase self-cal
! Adding 69 model components to the UV plane model.
! The established model now contains 496 components and 1.21165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064650Jy  sigma=0.746053
! Fit after  self-cal, rms=0.064653Jy  sigma=0.745874
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00157113 Jy
! Component: 100  -  total flux cleaned = -0.00172517 Jy
! Component: 150  -  total flux cleaned = -0.0017294 Jy
! Component: 200  -  total flux cleaned = -0.00193752 Jy
! Total flux subtracted in 200 components = -0.00193752 Jy
! Clean residual min=-0.001113 max=0.001126 Jy/beam
! Clean residual mean=0.000034 rms=0.000528 Jy/beam
! Combined flux in latest and established models = 1.20972 Jy
! Performing phase self-cal
! Adding 79 model components to the UV plane model.
! The established model now contains 567 components and 1.20972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064468Jy  sigma=0.744096
! Fit after  self-cal, rms=0.064488Jy  sigma=0.743968
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.064488Jy  sigma=0.743968
! Fit after  self-cal, rms=0.064369Jy  sigma=0.742942
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.965 mas, bmaj=32.75 mas, bpa=19.76 degrees
! Estimated noise=3.25369 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.717721 Jy
! Component: 100  -  total flux cleaned = 0.998115 Jy
! Component: 150  -  total flux cleaned = 1.10894 Jy
! Component: 200  -  total flux cleaned = 1.13037 Jy
! Total flux subtracted in 200 components = 1.13037 Jy
! Clean residual min=-0.026434 max=0.026527 Jy/beam
! Clean residual mean=-0.000736 rms=0.010707 Jy/beam
! Combined flux in latest and established models = 1.13037 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 1.13037 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=36.67 mas, bpa=19.37 degrees
! Estimated noise=2.91603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0474625 Jy
! Component: 100  -  total flux cleaned = 0.0580466 Jy
! Component: 150  -  total flux cleaned = 0.0592591 Jy
! Component: 200  -  total flux cleaned = 0.0578265 Jy
! Total flux subtracted in 200 components = 0.0578265 Jy
! Clean residual min=-0.011691 max=0.011648 Jy/beam
! Clean residual mean=-0.000243 rms=0.004413 Jy/beam
! Combined flux in latest and established models = 1.1882 Jy
! Adding 73 model components to the UV plane model.
! The established model now contains 113 components and 1.1882 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.234 mas, bmaj=35.72 mas, bpa=19.32 degrees
! Estimated noise=2.94757 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00344439 Jy
! Component: 100  -  total flux cleaned = -0.000663846 Jy
! Component: 150  -  total flux cleaned = 0.00120142 Jy
! Component: 200  -  total flux cleaned = 0.00238294 Jy
! Total flux subtracted in 200 components = 0.00238294 Jy
! Clean residual min=-0.006697 max=0.006837 Jy/beam
! Clean residual mean=-0.000133 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 1.19058 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025637 Jy
! Component: 100  -  total flux cleaned = 0.00539856 Jy
! Component: 150  -  total flux cleaned = 0.008037 Jy
! Component: 200  -  total flux cleaned = 0.00869021 Jy
! Total flux subtracted in 200 components = 0.00869021 Jy
! Clean residual min=-0.011485 max=0.011158 Jy/beam
! Clean residual mean=-0.000182 rms=0.003411 Jy/beam
! Combined flux in latest and established models = 1.19927 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 164 components and 1.19927 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.026 mas, bmaj=36.67 mas, bpa=19.37 degrees
! Estimated noise=2.91603 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00136308 Jy
! Component: 100  -  total flux cleaned = 0.00135613 Jy
! Component: 150  -  total flux cleaned = 0.00040065 Jy
! Component: 200  -  total flux cleaned = -0.000218114 Jy
! Total flux subtracted in 200 components = -0.000218114 Jy
! Clean residual min=-0.010107 max=0.010407 Jy/beam
! Clean residual mean=-0.000001 rms=0.002493 Jy/beam
! Combined flux in latest and established models = 1.19905 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 171 components and 1.19905 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066768Jy  sigma=0.768494
! Fit after  self-cal, rms=0.066628Jy  sigma=0.766039
wmodel /J0106-4034_X_map.mod
! wmodel: Unable to open new model file: /J0106-4034_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0106-4034_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.026 x 36.67 at 19.37 degrees (North through East)
! Clean map  min=-0.017462  max=0.58796 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0106-4034_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.587959 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0017894 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.913024 0.913024 1.82605 3.6521 7.30419 14.6084 29.2168 58.4335
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0053 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.587 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  328.578 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0106-4034_X_dfm.log closed on Thu May 19 22:54:41 2016