! Started logfile: /scr/pima/bg219i_uvs/J0102+5824_X_dfm.log on Thu May 19 22:54:19 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219i_uvs/J0102+5824_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219i_uvs/J0102+5824_X_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.885714 visibilities/baseline/integration-bin.
! Found source: J0102+5824
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 3348 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0102+5824_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 14 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=3.249791Jy  sigma=31.285595
! Fit after  self-cal, rms=2.129461Jy  sigma=20.369934
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5849 mas, bmaj=2.574 mas, bpa=29.43 degrees
! Estimated noise=2.41607 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.1854 Jy
! Component: 100  -  total flux cleaned = 2.78969 Jy
! Total flux subtracted in 100 components = 2.78969 Jy
! Clean residual min=-0.134902 max=0.276776 Jy/beam
! Clean residual mean=0.000194 rms=0.033035 Jy/beam
! Combined flux in latest and established models = 2.78969 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 2.78969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.529279Jy  sigma=5.054419
! Fit after  self-cal, rms=0.527640Jy  sigma=5.046396
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.309521 Jy
! Component: 100  -  total flux cleaned = 0.473687 Jy
! Total flux subtracted in 100 components = 0.473687 Jy
! Clean residual min=-0.052273 max=0.079360 Jy/beam
! Clean residual mean=0.000071 rms=0.012757 Jy/beam
! Combined flux in latest and established models = 3.26338 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 8 components and 3.26338 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.197710Jy  sigma=1.892241
! Fit after  self-cal, rms=0.194168Jy  sigma=1.872884
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0908825 Jy
! Component: 100  -  total flux cleaned = 0.142895 Jy
! Total flux subtracted in 100 components = 0.142895 Jy
! Clean residual min=-0.031297 max=0.043429 Jy/beam
! Clean residual mean=0.000034 rms=0.008108 Jy/beam
! Combined flux in latest and established models = 3.40627 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 12 components and 3.40627 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.128948Jy  sigma=1.251459
! Fit after  self-cal, rms=0.127767Jy  sigma=1.245177
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7458 mas, bmaj=2.482 mas, bpa=29.67 degrees
! Estimated noise=1.62602 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, -1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0479628 Jy
! Component: 100  -  total flux cleaned = 0.0790159 Jy
! Component: 150  -  total flux cleaned = 0.101378 Jy
! Component: 200  -  total flux cleaned = 0.115121 Jy
! Total flux subtracted in 200 components = 0.115121 Jy
! Clean residual min=-0.020637 max=0.023078 Jy/beam
! Clean residual mean=0.000022 rms=0.004111 Jy/beam
! Combined flux in latest and established models = 3.52139 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 43 components and 3.52139 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102687Jy  sigma=1.020900
! Fit after  self-cal, rms=0.101828Jy  sigma=1.010620
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7458 x 2.482 at 29.67 degrees (North through East)
! Clean map  min=-0.016635  max=2.9989 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.00     KP        1.00     
!   LA        1.00     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        0.99     
!   LA        1.00     MK        1.03     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.03     NL        1.01     OV        0.97     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        1.01     
!   LA        0.99     MK        1.01     NL        1.02     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.00     KP        1.01     
!   LA        0.99     MK        1.02     NL        1.01     OV        0.98     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        0.99     KP        1.00     
!   LA        1.00     MK        1.02     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.98     KP        0.99     
!   LA        1.00     MK        1.00     NL        1.00     OV        0.98     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.99     KP        0.99     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.02     HN        1.01     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.98     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        0.98     KP        1.00     
!   LA        0.99     MK        1.01     NL        1.01     OV        0.98     
!   PT        0.98     SC        0.97     
! 
! 
! Fit before self-cal, rms=0.101828Jy  sigma=1.010620
! Fit after  self-cal, rms=0.088638Jy  sigma=0.876943
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.746 mas, bmaj=2.485 mas, bpa=29.66 degrees
! Estimated noise=1.61959 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0023452 Jy
! Component: 100  -  total flux cleaned = 0.00135012 Jy
! Component: 150  -  total flux cleaned = 0.00130515 Jy
! Component: 200  -  total flux cleaned = 0.00132087 Jy
! Total flux subtracted in 200 components = 0.00132087 Jy
! Clean residual min=-0.007270 max=0.007439 Jy/beam
! Clean residual mean=-0.000001 rms=0.001603 Jy/beam
! Combined flux in latest and established models = 3.52272 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 59 components and 3.52272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086403Jy  sigma=0.862683
! Fit after  self-cal, rms=0.086159Jy  sigma=0.861449
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.086159Jy  sigma=0.861449
! Fit after  self-cal, rms=0.085873Jy  sigma=0.859506
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7457 mas, bmaj=2.484 mas, bpa=29.66 degrees
! Estimated noise=1.61865 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000103508 Jy
! Component: 100  -  total flux cleaned = 0.000287709 Jy
! Component: 150  -  total flux cleaned = 0.000458767 Jy
! Component: 200  -  total flux cleaned = 0.000612068 Jy
! Total flux subtracted in 200 components = 0.000612068 Jy
! Clean residual min=-0.006171 max=0.006431 Jy/beam
! Clean residual mean=-0.000001 rms=0.001418 Jy/beam
! Combined flux in latest and established models = 3.52333 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 70 components and 3.52333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084905Jy  sigma=0.854062
! Fit after  self-cal, rms=0.084800Jy  sigma=0.853654
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-7, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00334253 Jy
! Component: 100  -  total flux cleaned = 0.00384989 Jy
! Component: 150  -  total flux cleaned = 0.00386831 Jy
! Component: 200  -  total flux cleaned = 0.00374397 Jy
! Total flux subtracted in 200 components = 0.00374397 Jy
! Clean residual min=-0.005374 max=0.005676 Jy/beam
! Clean residual mean=-0.000002 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 3.52707 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 87 components and 3.52707 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084158Jy  sigma=0.849986
! Fit after  self-cal, rms=0.084084Jy  sigma=0.849713
! Inverting map 
! Added new window around map position (12.8, 35.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0045298 Jy
! Component: 100  -  total flux cleaned = 0.00505653 Jy
! Component: 150  -  total flux cleaned = 0.00528149 Jy
! Component: 200  -  total flux cleaned = 0.00538007 Jy
! Total flux subtracted in 200 components = 0.00538007 Jy
! Clean residual min=-0.004740 max=0.004618 Jy/beam
! Clean residual mean=-0.000001 rms=0.001097 Jy/beam
! Combined flux in latest and established models = 3.53245 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 108 components and 3.53245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083632Jy  sigma=0.846673
! Fit after  self-cal, rms=0.083603Jy  sigma=0.846479
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083603Jy  sigma=0.846479
! Fit after  self-cal, rms=0.083542Jy  sigma=0.844442
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7455 mas, bmaj=2.484 mas, bpa=29.66 degrees
! Estimated noise=1.61697 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00164991 Jy
! Component: 100  -  total flux cleaned = -0.00108753 Jy
! Component: 150  -  total flux cleaned = -0.00118924 Jy
! Component: 200  -  total flux cleaned = -0.00119113 Jy
! Total flux subtracted in 200 components = -0.00119113 Jy
! Clean residual min=-0.004307 max=0.004378 Jy/beam
! Clean residual mean=0.000000 rms=0.001061 Jy/beam
! Combined flux in latest and established models = 3.53126 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 121 components and 3.53126 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083156Jy  sigma=0.843526
! Fit after  self-cal, rms=0.083140Jy  sigma=0.843466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000478635 Jy
! Component: 100  -  total flux cleaned = -0.000558461 Jy
! Component: 150  -  total flux cleaned = -0.000634006 Jy
! Component: 200  -  total flux cleaned = -0.000560133 Jy
! Total flux subtracted in 200 components = -0.000560133 Jy
! Clean residual min=-0.004069 max=0.004219 Jy/beam
! Clean residual mean=0.000001 rms=0.001010 Jy/beam
! Combined flux in latest and established models = 3.5307 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 138 components and 3.5307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082977Jy  sigma=0.842744
! Fit after  self-cal, rms=0.082963Jy  sigma=0.842708
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082963Jy  sigma=0.842708
! Fit after  self-cal, rms=0.083093Jy  sigma=0.841965
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.876 mas, bmaj=2.665 mas, bpa=34.16 degrees
! Estimated noise=2.3746 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0034322 Jy
! Component: 100  -  total flux cleaned = -0.00453308 Jy
! Component: 150  -  total flux cleaned = -0.00506107 Jy
! Component: 200  -  total flux cleaned = -0.00530193 Jy
! Total flux subtracted in 200 components = -0.00530193 Jy
! Clean residual min=-0.005323 max=0.005782 Jy/beam
! Clean residual mean=0.000001 rms=0.001541 Jy/beam
! Combined flux in latest and established models = 3.5254 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 164 components and 3.5254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082945Jy  sigma=0.842134
! Fit after  self-cal, rms=0.082940Jy  sigma=0.842071
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000947641 Jy
! Component: 100  -  total flux cleaned = -0.00123551 Jy
! Component: 150  -  total flux cleaned = -0.0013685 Jy
! Component: 200  -  total flux cleaned = -0.00149718 Jy
! Total flux subtracted in 200 components = -0.00149718 Jy
! Clean residual min=-0.004896 max=0.005541 Jy/beam
! Clean residual mean=0.000002 rms=0.001420 Jy/beam
! Combined flux in latest and established models = 3.5239 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 176 components and 3.5239 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082887Jy  sigma=0.841952
! Fit after  self-cal, rms=0.082874Jy  sigma=0.841927
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7454 mas, bmaj=2.483 mas, bpa=29.67 degrees
! Estimated noise=1.61551 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7454 x 2.483 at 29.67 degrees (North through East)
! Clean map  min=-0.0067144  max=2.9867 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.082874Jy  sigma=0.841927
! Fit after  self-cal, rms=0.068848Jy  sigma=0.515452
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=2.484 mas, bpa=29.65 degrees
! Estimated noise=1.61736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00180383 Jy
! Component: 100  -  total flux cleaned = -0.00179721 Jy
! Component: 150  -  total flux cleaned = -0.00127444 Jy
! Component: 200  -  total flux cleaned = -0.00091662 Jy
! Total flux subtracted in 200 components = -0.00091662 Jy
! Clean residual min=-0.005000 max=0.006537 Jy/beam
! Clean residual mean=0.000001 rms=0.001179 Jy/beam
! Combined flux in latest and established models = 3.52298 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 195 components and 3.52298 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068266Jy  sigma=0.508783
! Fit after  self-cal, rms=0.068258Jy  sigma=0.508567
! Inverting map 
! Added new window around map position (10, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00261822 Jy
! Component: 100  -  total flux cleaned = 0.00180187 Jy
! Component: 150  -  total flux cleaned = 0.002371 Jy
! Component: 200  -  total flux cleaned = 0.00298294 Jy
! Total flux subtracted in 200 components = 0.00298294 Jy
! Clean residual min=-0.004035 max=0.004469 Jy/beam
! Clean residual mean=-0.000000 rms=0.000984 Jy/beam
! Combined flux in latest and established models = 3.52597 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 214 components and 3.52597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067584Jy  sigma=0.501888
! Fit after  self-cal, rms=0.067565Jy  sigma=0.501438
! Inverting map 
! Added new window around map position (3.8, 37).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241295 Jy
! Component: 100  -  total flux cleaned = 0.00284745 Jy
! Component: 150  -  total flux cleaned = 0.00361861 Jy
! Component: 200  -  total flux cleaned = 0.00467746 Jy
! Total flux subtracted in 200 components = 0.00467746 Jy
! Clean residual min=-0.003370 max=0.003396 Jy/beam
! Clean residual mean=-0.000000 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 3.53064 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 237 components and 3.53064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067124Jy  sigma=0.498037
! Fit after  self-cal, rms=0.067129Jy  sigma=0.497881
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067129Jy  sigma=0.497881
! Fit after  self-cal, rms=0.067292Jy  sigma=0.495975
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5874 mas, bmaj=2.573 mas, bpa=29.4 degrees
! Estimated noise=2.4114 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18075 Jy
! Component: 100  -  total flux cleaned = 2.77944 Jy
! Component: 150  -  total flux cleaned = 3.08419 Jy
! Component: 200  -  total flux cleaned = 3.2477 Jy
! Total flux subtracted in 200 components = 3.2477 Jy
! Clean residual min=-0.047085 max=0.079041 Jy/beam
! Clean residual mean=0.000069 rms=0.010712 Jy/beam
! Combined flux in latest and established models = 3.2477 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 3.2477 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=2.484 mas, bpa=29.64 degrees
! Estimated noise=1.6175 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.112426 Jy
! Component: 100  -  total flux cleaned = 0.16767 Jy
! Component: 150  -  total flux cleaned = 0.199895 Jy
! Component: 200  -  total flux cleaned = 0.221132 Jy
! Total flux subtracted in 200 components = 0.221132 Jy
! Clean residual min=-0.012152 max=0.013558 Jy/beam
! Clean residual mean=0.000037 rms=0.002868 Jy/beam
! Combined flux in latest and established models = 3.46883 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 26 components and 3.46883 Jy
! Inverting map 
! Added new window around map position (20.8, 25.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160664 Jy
! Component: 100  -  total flux cleaned = 0.0284443 Jy
! Component: 150  -  total flux cleaned = 0.036032 Jy
! Component: 200  -  total flux cleaned = 0.0414126 Jy
! Total flux subtracted in 200 components = 0.0414126 Jy
! Clean residual min=-0.008784 max=0.007925 Jy/beam
! Clean residual mean=0.000014 rms=0.001788 Jy/beam
! Combined flux in latest and established models = 3.51024 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 49 components and 3.51024 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.876 mas, bmaj=2.666 mas, bpa=34.17 degrees
! Estimated noise=2.37519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793854 Jy
! Component: 100  -  total flux cleaned = 0.0121323 Jy
! Component: 150  -  total flux cleaned = 0.0156367 Jy
! Component: 200  -  total flux cleaned = 0.0185083 Jy
! Total flux subtracted in 200 components = 0.0185083 Jy
! Clean residual min=-0.006980 max=0.006899 Jy/beam
! Clean residual mean=0.000010 rms=0.002078 Jy/beam
! Combined flux in latest and established models = 3.52875 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00241219 Jy
! Component: 100  -  total flux cleaned = 0.0047665 Jy
! Component: 150  -  total flux cleaned = 0.0070464 Jy
! Component: 200  -  total flux cleaned = 0.00899503 Jy
! Total flux subtracted in 200 components = 0.00899503 Jy
! Clean residual min=-0.005601 max=0.005974 Jy/beam
! Clean residual mean=0.000006 rms=0.001713 Jy/beam
! Combined flux in latest and established models = 3.53775 Jy
! Adding 70 model components to the UV plane model.
! The established model now contains 115 components and 3.53775 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7465 mas, bmaj=2.484 mas, bpa=29.64 degrees
! Estimated noise=1.6175 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122292 Jy
! Component: 100  -  total flux cleaned = 0.00267675 Jy
! Component: 150  -  total flux cleaned = 0.00339851 Jy
! Component: 200  -  total flux cleaned = 0.00421931 Jy
! Total flux subtracted in 200 components = 0.00421931 Jy
! Clean residual min=-0.005524 max=0.004925 Jy/beam
! Clean residual mean=0.000002 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 3.54197 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 142 components and 3.54197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.068119Jy  sigma=0.507751
! Fit after  self-cal, rms=0.068090Jy  sigma=0.505897
wmodel /J0102+5824_X_map.mod
! wmodel: Unable to open new model file: /J0102+5824_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219i_uvs/J0102+5824_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7465 x 2.484 at 29.64 degrees (North through East)
! Clean map  min=-0.0047051  max=2.9852 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219i_uvs/J0102+5824_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 2.98515 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00110604 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.111154 0.111154 0.222309 0.444618 0.889235 1.77847 3.55694 7.11388 14.2278 28.4555 56.911
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0033 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       2.985 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  2698.95 
quit
! Quitting program
! Log file /scr/pima/bg219i_uvs/J0102+5824_X_dfm.log closed on Thu May 19 22:54:22 2016