! Started logfile: /scr/pima/bg219h_uvs/J2330+3348_X_dfm.log on Thu May 19 22:47:26 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2330+3348_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2330+3348_X_uva.fits
! AN table 1: 28 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.923016 visibilities/baseline/integration-bin.
! Found source: J2330+3348
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 13956 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2330+3348_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.032344Jy  sigma=23.463176
! Fit after  self-cal, rms=0.717050Jy  sigma=16.183285
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6976 mas, bmaj=1.5 mas, bpa=-3.344 degrees
! Estimated noise=0.488428 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.204901 Jy
! Component: 100  -  total flux cleaned = 0.280032 Jy
! Total flux subtracted in 100 components = 0.280032 Jy
! Clean residual min=-0.013473 max=0.035877 Jy/beam
! Clean residual mean=-0.000013 rms=0.003547 Jy/beam
! Combined flux in latest and established models = 0.280032 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.280032 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107926Jy  sigma=2.395002
! Fit after  self-cal, rms=0.107636Jy  sigma=2.389788
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0412287 Jy
! Component: 100  -  total flux cleaned = 0.0641891 Jy
! Total flux subtracted in 100 components = 0.0641891 Jy
! Clean residual min=-0.008142 max=0.023285 Jy/beam
! Clean residual mean=-0.000003 rms=0.001996 Jy/beam
! Combined flux in latest and established models = 0.344221 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 10 components and 0.344221 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083903Jy  sigma=1.795589
! Fit after  self-cal, rms=0.083741Jy  sigma=1.793022
! Inverting map 
! Added new window around map position (1.2, -0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211096 Jy
! Component: 100  -  total flux cleaned = 0.0319622 Jy
! Total flux subtracted in 100 components = 0.0319622 Jy
! Clean residual min=-0.006138 max=0.007323 Jy/beam
! Clean residual mean=-0.000001 rms=0.001365 Jy/beam
! Combined flux in latest and established models = 0.376183 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.376183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.077132Jy  sigma=1.632311
! Fit after  self-cal, rms=0.076709Jy  sigma=1.622761
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0080436 Jy
! Component: 100  -  total flux cleaned = 0.0123208 Jy
! Total flux subtracted in 100 components = 0.0123208 Jy
! Clean residual min=-0.004690 max=0.005829 Jy/beam
! Clean residual mean=0.000000 rms=0.001177 Jy/beam
! Combined flux in latest and established models = 0.388504 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 17 components and 0.388504 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.075539Jy  sigma=1.593935
! Fit after  self-cal, rms=0.075491Jy  sigma=1.592829
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8698 mas, bmaj=1.817 mas, bpa=-3.03 degrees
! Estimated noise=0.295007 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.6, 23.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00647453 Jy
! Component: 100  -  total flux cleaned = 0.0105677 Jy
! Component: 150  -  total flux cleaned = 0.0133864 Jy
! Component: 200  -  total flux cleaned = 0.0142567 Jy
! Total flux subtracted in 200 components = 0.0142567 Jy
! Clean residual min=-0.004097 max=0.004878 Jy/beam
! Clean residual mean=-0.000004 rms=0.000972 Jy/beam
! Combined flux in latest and established models = 0.402761 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 33 components and 0.402761 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074797Jy  sigma=1.578344
! Fit after  self-cal, rms=0.074777Jy  sigma=1.577731
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8698 x 1.817 at -3.03 degrees (North through East)
! Clean map  min=-0.0038087  max=0.28754 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.06     KP        0.99     
!   LA        0.97     MK        0.96     NL        0.99     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.99     MK        0.98     NL        1.00     OV        1.04     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.03     KP        1.00     
!   LA        0.97     MK        0.97     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.99     
!   LA        0.96     MK        0.96     NL        1.01     OV        1.03     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.02     KP        0.99     
!   LA        0.97     MK        1.03     NL        1.00     OV        1.01     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        1.05     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.01     OV        1.02     
!   PT        1.00     SC        0.94     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.02     HN        1.03     KP        1.02     
!   LA        0.99     MK        0.97     NL        0.98     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.04     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.04     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.01     HN        1.04     KP        0.99     
!   LA        0.97     MK        0.99     NL        1.02     OV        1.02     
!   PT        0.98     SC        1.01     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.03     KP        1.00     
!   LA        0.96     MK        0.98     NL        1.00     OV        1.03     
!   PT        1.00     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.05     KP        1.00     
!   LA        0.99     MK        1.00     NL        0.99     OV        1.04     
!   PT        0.98     SC        0.97     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.96     MK        1.00     NL        1.01     OV        1.03     
!   PT        1.00     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.074777Jy  sigma=1.577731
! Fit after  self-cal, rms=0.074612Jy  sigma=1.565672
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8667 mas, bmaj=1.813 mas, bpa=-2.788 degrees
! Estimated noise=0.292652 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000737201 Jy
! Component: 100  -  total flux cleaned = -0.000747836 Jy
! Component: 150  -  total flux cleaned = -0.000750124 Jy
! Component: 200  -  total flux cleaned = -0.000581014 Jy
! Total flux subtracted in 200 components = -0.000581014 Jy
! Clean residual min=-0.003493 max=0.003869 Jy/beam
! Clean residual mean=-0.000001 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.40218 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 47 components and 0.40218 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074471Jy  sigma=1.563573
! Fit after  self-cal, rms=0.074475Jy  sigma=1.563468
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.074475Jy  sigma=1.563468
! Fit after  self-cal, rms=0.073968Jy  sigma=1.539180
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8682 mas, bmaj=1.804 mas, bpa=-2.996 degrees
! Estimated noise=0.293208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00203506 Jy
! Component: 100  -  total flux cleaned = -0.00274352 Jy
! Component: 150  -  total flux cleaned = -0.0029148 Jy
! Component: 200  -  total flux cleaned = -0.00306257 Jy
! Total flux subtracted in 200 components = -0.00306257 Jy
! Clean residual min=-0.002070 max=0.002126 Jy/beam
! Clean residual mean=-0.000002 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.399117 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 75 components and 0.399117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073892Jy  sigma=1.537503
! Fit after  self-cal, rms=0.073901Jy  sigma=1.537371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (27, -15.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00123837 Jy
! Component: 100  -  total flux cleaned = 0.00163898 Jy
! Component: 150  -  total flux cleaned = 0.00175288 Jy
! Component: 200  -  total flux cleaned = 0.0018215 Jy
! Total flux subtracted in 200 components = 0.0018215 Jy
! Clean residual min=-0.002032 max=0.002033 Jy/beam
! Clean residual mean=-0.000002 rms=0.000458 Jy/beam
! Combined flux in latest and established models = 0.400938 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 101 components and 0.400938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073833Jy  sigma=1.536024
! Fit after  self-cal, rms=0.073832Jy  sigma=1.535985
! Inverting map 
! Added new window around map position (-2.2, 9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00135477 Jy
! Component: 100  -  total flux cleaned = 0.00160608 Jy
! Component: 150  -  total flux cleaned = 0.00164664 Jy
! Component: 200  -  total flux cleaned = 0.00172535 Jy
! Total flux subtracted in 200 components = 0.00172535 Jy
! Clean residual min=-0.001877 max=0.001866 Jy/beam
! Clean residual mean=-0.000002 rms=0.000429 Jy/beam
! Combined flux in latest and established models = 0.402664 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 114 components and 0.402664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073759Jy  sigma=1.534436
! Fit after  self-cal, rms=0.073754Jy  sigma=1.534328
! Inverting map 
! Added new window around map position (9, 37.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161883 Jy
! Component: 100  -  total flux cleaned = 0.00220506 Jy
! Component: 150  -  total flux cleaned = 0.0024253 Jy
! Component: 200  -  total flux cleaned = 0.00246001 Jy
! Total flux subtracted in 200 components = 0.00246001 Jy
! Clean residual min=-0.001769 max=0.001661 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.405124 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 129 components and 0.405124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073698Jy  sigma=1.533222
! Fit after  self-cal, rms=0.073695Jy  sigma=1.533150
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073695Jy  sigma=1.533150
! Fit after  self-cal, rms=0.073759Jy  sigma=1.532864
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8678 mas, bmaj=1.803 mas, bpa=-2.954 degrees
! Estimated noise=0.29303 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000566154 Jy
! Component: 100  -  total flux cleaned = -0.000644364 Jy
! Component: 150  -  total flux cleaned = -0.000678166 Jy
! Component: 200  -  total flux cleaned = -0.000583634 Jy
! Total flux subtracted in 200 components = -0.000583634 Jy
! Clean residual min=-0.001703 max=0.001597 Jy/beam
! Clean residual mean=-0.000001 rms=0.000382 Jy/beam
! Combined flux in latest and established models = 0.40454 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 136 components and 0.40454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073725Jy  sigma=1.532158
! Fit after  self-cal, rms=0.073724Jy  sigma=1.532132
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.33747e-05 Jy
! Component: 100  -  total flux cleaned = 9.26229e-05 Jy
! Component: 150  -  total flux cleaned = 6.4951e-05 Jy
! Component: 200  -  total flux cleaned = 0.000118225 Jy
! Total flux subtracted in 200 components = 0.000118225 Jy
! Clean residual min=-0.001691 max=0.001619 Jy/beam
! Clean residual mean=-0.000001 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.404658 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 140 components and 0.404658 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073704Jy  sigma=1.531696
! Fit after  self-cal, rms=0.073703Jy  sigma=1.531686
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073703Jy  sigma=1.531686
! Fit after  self-cal, rms=0.073714Jy  sigma=1.531620
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=2.725 mas, bpa=-2.361 degrees
! Estimated noise=0.379172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000329513 Jy
! Component: 100  -  total flux cleaned = -0.000177815 Jy
! Component: 150  -  total flux cleaned = 2.48201e-05 Jy
! Component: 200  -  total flux cleaned = 0.000222702 Jy
! Total flux subtracted in 200 components = 0.000222702 Jy
! Clean residual min=-0.001850 max=0.001647 Jy/beam
! Clean residual mean=-0.000002 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.404881 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 167 components and 0.404881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073707Jy  sigma=1.531393
! Fit after  self-cal, rms=0.073707Jy  sigma=1.531364
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000132325 Jy
! Component: 100  -  total flux cleaned = 0.000312295 Jy
! Component: 150  -  total flux cleaned = 0.000419003 Jy
! Component: 200  -  total flux cleaned = 0.000500553 Jy
! Total flux subtracted in 200 components = 0.000500553 Jy
! Clean residual min=-0.001805 max=0.001634 Jy/beam
! Clean residual mean=-0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.405382 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 180 components and 0.405382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073704Jy  sigma=1.531303
! Fit after  self-cal, rms=0.073704Jy  sigma=1.531291
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8678 mas, bmaj=1.803 mas, bpa=-2.943 degrees
! Estimated noise=0.292862 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8678 x 1.803 at -2.943 degrees (North through East)
! Clean map  min=-0.0017906  max=0.28596 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6948 mas, bmaj=1.487 mas, bpa=-3.388 degrees
! Estimated noise=0.484589 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.203793 Jy
! Component: 100  -  total flux cleaned = 0.27992 Jy
! Component: 150  -  total flux cleaned = 0.322672 Jy
! Component: 200  -  total flux cleaned = 0.34897 Jy
! Total flux subtracted in 200 components = 0.34897 Jy
! Clean residual min=-0.005387 max=0.013583 Jy/beam
! Clean residual mean=-0.000005 rms=0.001487 Jy/beam
! Combined flux in latest and established models = 0.34897 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.34897 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8678 mas, bmaj=1.803 mas, bpa=-2.943 degrees
! Estimated noise=0.292862 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0224129 Jy
! Component: 100  -  total flux cleaned = 0.0337404 Jy
! Component: 150  -  total flux cleaned = 0.0397947 Jy
! Component: 200  -  total flux cleaned = 0.0436527 Jy
! Total flux subtracted in 200 components = 0.0436527 Jy
! Clean residual min=-0.002248 max=0.002290 Jy/beam
! Clean residual mean=-0.000002 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.392623 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 24 components and 0.392623 Jy
! Inverting map 
! Added new window around map position (-8, 23.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00288328 Jy
! Component: 100  -  total flux cleaned = 0.00524178 Jy
! Component: 150  -  total flux cleaned = 0.0064557 Jy
! Component: 200  -  total flux cleaned = 0.00723589 Jy
! Total flux subtracted in 200 components = 0.00723589 Jy
! Clean residual min=-0.001809 max=0.001786 Jy/beam
! Clean residual mean=-0.000002 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.399859 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 46 components and 0.399859 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.025 mas, bmaj=2.725 mas, bpa=-2.361 degrees
! Estimated noise=0.379172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196023 Jy
! Component: 100  -  total flux cleaned = 0.00300538 Jy
! Component: 150  -  total flux cleaned = 0.00376865 Jy
! Component: 200  -  total flux cleaned = 0.00422166 Jy
! Total flux subtracted in 200 components = 0.00422166 Jy
! Clean residual min=-0.002033 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.40408 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000329388 Jy
! Component: 100  -  total flux cleaned = 0.000625803 Jy
! Component: 150  -  total flux cleaned = 0.000776963 Jy
! Component: 200  -  total flux cleaned = 0.000944457 Jy
! Total flux subtracted in 200 components = 0.000944457 Jy
! Clean residual min=-0.001863 max=0.001531 Jy/beam
! Clean residual mean=-0.000002 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.405025 Jy
! Adding 55 model components to the UV plane model.
! The established model now contains 89 components and 0.405025 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8678 mas, bmaj=1.803 mas, bpa=-2.943 degrees
! Estimated noise=0.292862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.33078e-05 Jy
! Component: 100  -  total flux cleaned = -0.000229877 Jy
! Component: 150  -  total flux cleaned = -0.000186443 Jy
! Component: 200  -  total flux cleaned = -0.000225536 Jy
! Total flux subtracted in 200 components = -0.000225536 Jy
! Clean residual min=-0.001576 max=0.001550 Jy/beam
! Clean residual mean=-0.000001 rms=0.000373 Jy/beam
! Combined flux in latest and established models = 0.404799 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 108 components and 0.404799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073737Jy  sigma=1.532231
! Fit after  self-cal, rms=0.073729Jy  sigma=1.532068
wmodel /J2330+3348_X_map.mod
! wmodel: Unable to open new model file: /J2330+3348_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2330+3348_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8678 x 1.803 at -2.943 degrees (North through East)
! Clean map  min=-0.0014941  max=0.2857 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2330+3348_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.285696 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00037072 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.389281 0.389281 0.778562 1.55712 3.11425 6.22849 12.457 24.914 49.828 99.6559
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0011 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.285 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  770.651 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2330+3348_X_dfm.log closed on Thu May 19 22:47:29 2016