! Started logfile: /scr/pima/bg219h_uvs/J2312+3847_X_uvs.log on Thu Apr  7 12:22:47 2016
obs /scr/pima/bg219h_uvs/J2312+3847_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2312+3847_X_uva.fits
! AN table 1: 58 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.91954 visibilities/baseline/integration-bin.
! Found source: J2312+3847
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 28800 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: (none)
! Reading IF 10 channels: (none)
! Reading IF 11 channels: (none)
! Reading IF 12 channels: (none)
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/bg219h_uvs/J2312+3847_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=1.017904Jy  sigma=25.347804
! Fit after  self-cal, rms=0.848089Jy  sigma=21.140173
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6837 mas, bmaj=1.453 mas, bpa=-4.545 degrees
! Estimated noise=0.480887 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108614 Jy
! Component: 100  -  total flux cleaned = 0.150901 Jy
! Total flux subtracted in 100 components = 0.150901 Jy
! Clean residual min=-0.015128 max=0.053989 Jy/beam
! Clean residual mean=-0.000013 rms=0.004485 Jy/beam
! Combined flux in latest and established models = 0.150901 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.150901 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.113048Jy  sigma=2.750293
! Fit after  self-cal, rms=0.112776Jy  sigma=2.742513
! Inverting map 
! Added new window around map position (-1.2, -1.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0473262 Jy
! Component: 100  -  total flux cleaned = 0.0720361 Jy
! Total flux subtracted in 100 components = 0.0720361 Jy
! Clean residual min=-0.009850 max=0.016246 Jy/beam
! Clean residual mean=-0.000011 rms=0.002635 Jy/beam
! Combined flux in latest and established models = 0.222937 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 15 components and 0.222937 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.085247Jy  sigma=2.036834
! Fit after  self-cal, rms=0.082782Jy  sigma=1.972394
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199719 Jy
! Component: 100  -  total flux cleaned = 0.032941 Jy
! Total flux subtracted in 100 components = 0.032941 Jy
! Clean residual min=-0.007290 max=0.014351 Jy/beam
! Clean residual mean=-0.000010 rms=0.001968 Jy/beam
! Combined flux in latest and established models = 0.255878 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 20 components and 0.255878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.075175Jy  sigma=1.773699
! Fit after  self-cal, rms=0.074984Jy  sigma=1.767586
! Inverting map 
! Added new window around map position (4.4, 2.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155145 Jy
! Component: 100  -  total flux cleaned = 0.0260022 Jy
! Total flux subtracted in 100 components = 0.0260022 Jy
! Clean residual min=-0.005072 max=0.009435 Jy/beam
! Clean residual mean=-0.000008 rms=0.001520 Jy/beam
! Combined flux in latest and established models = 0.281881 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 28 components and 0.281881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.069829Jy  sigma=1.621448
! Fit after  self-cal, rms=0.069672Jy  sigma=1.617858
! Inverting map 
! Added new window around map position (1.2, 0.6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0101512 Jy
! Component: 100  -  total flux cleaned = 0.018166 Jy
! Total flux subtracted in 100 components = 0.018166 Jy
! Clean residual min=-0.004514 max=0.006355 Jy/beam
! Clean residual mean=-0.000007 rms=0.001269 Jy/beam
! Combined flux in latest and established models = 0.300047 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.300047 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.066971Jy  sigma=1.544731
! Fit after  self-cal, rms=0.066913Jy  sigma=1.543021
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8799 mas, bmaj=1.758 mas, bpa=-6.228 degrees
! Estimated noise=0.229814 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012088 Jy
! Component: 100  -  total flux cleaned = 0.0209902 Jy
! Component: 150  -  total flux cleaned = 0.0278776 Jy
! Component: 200  -  total flux cleaned = 0.0332474 Jy
! Total flux subtracted in 200 components = 0.0332474 Jy
! Clean residual min=-0.003415 max=0.005084 Jy/beam
! Clean residual mean=-0.000014 rms=0.001022 Jy/beam
! Combined flux in latest and established models = 0.333294 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 54 components and 0.333294 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063924Jy  sigma=1.459854
! Fit after  self-cal, rms=0.063822Jy  sigma=1.456733
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8799 x 1.758 at -6.228 degrees (North through East)
! Clean map  min=-0.0031238  max=0.14977 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.07     KP        0.99     
!   LA        0.94     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.97     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.97     HN        1.07     KP        0.97     
!   LA        0.94     MK        1.03     NL        1.01     OV        0.99     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.05     KP        0.98     
!   LA        0.95     MK        0.99     NL        1.00     OV        1.00     
!   PT        0.99     SC        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     HN        1.00     KP        0.98     
!   LA        0.94     MK        0.98     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.01     KP        0.98     
!   LA        0.95     MK        0.99     NL        1.01     OV        1.00     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.00     HN        1.02     KP        0.98     
!   LA        0.94     MK        1.04     NL        1.02     OV        1.02     
!   PT        0.99     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.05     KP        0.98     
!   LA        0.96     MK        0.98     NL        1.02     OV        1.01     
!   PT        0.99     SC        0.97     
! 
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.063822Jy  sigma=1.456733
! Fit after  self-cal, rms=0.062698Jy  sigma=1.442695
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8824 mas, bmaj=1.761 mas, bpa=-5.79 degrees
! Estimated noise=0.225339 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00438156 Jy
! Component: 100  -  total flux cleaned = 0.00561023 Jy
! Component: 150  -  total flux cleaned = 0.00621954 Jy
! Component: 200  -  total flux cleaned = 0.00651336 Jy
! Total flux subtracted in 200 components = 0.00651336 Jy
! Clean residual min=-0.002741 max=0.002866 Jy/beam
! Clean residual mean=-0.000007 rms=0.000675 Jy/beam
! Combined flux in latest and established models = 0.339808 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 86 components and 0.339807 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062330Jy  sigma=1.432136
! Fit after  self-cal, rms=0.062307Jy  sigma=1.431178
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062307Jy  sigma=1.431178
! Fit after  self-cal, rms=0.062342Jy  sigma=1.418272
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8849 mas, bmaj=1.748 mas, bpa=-5.821 degrees
! Estimated noise=0.225842 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00152591 Jy
! Component: 100  -  total flux cleaned = 0.00211664 Jy
! Component: 150  -  total flux cleaned = 0.00264637 Jy
! Component: 200  -  total flux cleaned = 0.0031169 Jy
! Total flux subtracted in 200 components = 0.0031169 Jy
! Clean residual min=-0.001709 max=0.002529 Jy/beam
! Clean residual mean=-0.000001 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.342924 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 103 components and 0.342924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062255Jy  sigma=1.415567
! Fit after  self-cal, rms=0.062250Jy  sigma=1.415279
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, 2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199744 Jy
! Component: 100  -  total flux cleaned = 0.00252558 Jy
! Component: 150  -  total flux cleaned = 0.00279901 Jy
! Component: 200  -  total flux cleaned = 0.00298124 Jy
! Total flux subtracted in 200 components = 0.00298124 Jy
! Clean residual min=-0.001495 max=0.001901 Jy/beam
! Clean residual mean=-0.000000 rms=0.000352 Jy/beam
! Combined flux in latest and established models = 0.345906 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 125 components and 0.345906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062175Jy  sigma=1.412998
! Fit after  self-cal, rms=0.062171Jy  sigma=1.412883
! Inverting map 
! Added new window around map position (22.4, 20.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157645 Jy
! Component: 100  -  total flux cleaned = 0.00215888 Jy
! Component: 150  -  total flux cleaned = 0.00244004 Jy
! Component: 200  -  total flux cleaned = 0.0026402 Jy
! Total flux subtracted in 200 components = 0.0026402 Jy
! Clean residual min=-0.001356 max=0.001321 Jy/beam
! Clean residual mean=0.000000 rms=0.000320 Jy/beam
! Combined flux in latest and established models = 0.348546 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 139 components and 0.348546 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062124Jy  sigma=1.411595
! Fit after  self-cal, rms=0.062121Jy  sigma=1.411543
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062121Jy  sigma=1.411543
! Fit after  self-cal, rms=0.062151Jy  sigma=1.411341
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8847 mas, bmaj=1.747 mas, bpa=-5.906 degrees
! Estimated noise=0.225625 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000502907 Jy
! Component: 100  -  total flux cleaned = 0.000841697 Jy
! Component: 150  -  total flux cleaned = 0.000970205 Jy
! Component: 200  -  total flux cleaned = 0.00104922 Jy
! Total flux subtracted in 200 components = 0.00104922 Jy
! Clean residual min=-0.001319 max=0.001322 Jy/beam
! Clean residual mean=0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.349595 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 148 components and 0.349595 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062134Jy  sigma=1.410940
! Fit after  self-cal, rms=0.062135Jy  sigma=1.410922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000184989 Jy
! Component: 100  -  total flux cleaned = 0.000240249 Jy
! Component: 150  -  total flux cleaned = 0.000275278 Jy
! Component: 200  -  total flux cleaned = 0.000357579 Jy
! Total flux subtracted in 200 components = 0.000357579 Jy
! Clean residual min=-0.001291 max=0.001307 Jy/beam
! Clean residual mean=0.000000 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.349953 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 156 components and 0.349953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062125Jy  sigma=1.410695
! Fit after  self-cal, rms=0.062125Jy  sigma=1.410691
! Inverting map 
! Added new window around map position (-23.4, 25.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00115681 Jy
! Component: 100  -  total flux cleaned = 0.00122038 Jy
! Component: 150  -  total flux cleaned = 0.0013136 Jy
! Component: 200  -  total flux cleaned = 0.00147879 Jy
! Total flux subtracted in 200 components = 0.00147879 Jy
! Clean residual min=-0.001285 max=0.001239 Jy/beam
! Clean residual mean=0.000000 rms=0.000283 Jy/beam
! Combined flux in latest and established models = 0.351431 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 167 components and 0.351431 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062096Jy  sigma=1.409874
! Fit after  self-cal, rms=0.062094Jy  sigma=1.409851
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062094Jy  sigma=1.409851
! Fit after  self-cal, rms=0.062044Jy  sigma=1.409805
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=2.611 mas, bpa=-7.113 degrees
! Estimated noise=0.287079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.67814e-05 Jy
! Component: 100  -  total flux cleaned = 0.000156485 Jy
! Component: 150  -  total flux cleaned = 0.000155556 Jy
! Component: 200  -  total flux cleaned = 0.000116438 Jy
! Total flux subtracted in 200 components = 0.000116438 Jy
! Clean residual min=-0.001196 max=0.001067 Jy/beam
! Clean residual mean=0.000001 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.351548 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 194 components and 0.351548 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062039Jy  sigma=1.409691
! Fit after  self-cal, rms=0.062040Jy  sigma=1.409679
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.39603e-05 Jy
! Component: 100  -  total flux cleaned = 6.71488e-05 Jy
! Component: 150  -  total flux cleaned = 3.56241e-05 Jy
! Component: 200  -  total flux cleaned = 5.68689e-06 Jy
! Total flux subtracted in 200 components = 5.68689e-06 Jy
! Clean residual min=-0.001191 max=0.001022 Jy/beam
! Clean residual mean=0.000001 rms=0.000310 Jy/beam
! Combined flux in latest and established models = 0.351554 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 209 components and 0.351554 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062038Jy  sigma=1.409637
! Fit after  self-cal, rms=0.062037Jy  sigma=1.409628
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8843 mas, bmaj=1.748 mas, bpa=-5.959 degrees
! Estimated noise=0.225483 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8843 x 1.748 at -5.959 degrees (North through East)
! Clean map  min=-0.0012234  max=0.14628 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6865 mas, bmaj=1.442 mas, bpa=-4.385 degrees
! Estimated noise=0.473381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108012 Jy
! Component: 100  -  total flux cleaned = 0.163523 Jy
! Component: 150  -  total flux cleaned = 0.199158 Jy
! Component: 200  -  total flux cleaned = 0.223819 Jy
! Total flux subtracted in 200 components = 0.223819 Jy
! Clean residual min=-0.007882 max=0.014294 Jy/beam
! Clean residual mean=-0.000009 rms=0.002313 Jy/beam
! Combined flux in latest and established models = 0.223819 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.223819 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8843 mas, bmaj=1.748 mas, bpa=-5.959 degrees
! Estimated noise=0.225483 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0289366 Jy
! Component: 100  -  total flux cleaned = 0.0498127 Jy
! Component: 150  -  total flux cleaned = 0.0656142 Jy
! Component: 200  -  total flux cleaned = 0.0777482 Jy
! Total flux subtracted in 200 components = 0.0777482 Jy
! Clean residual min=-0.003950 max=0.007051 Jy/beam
! Clean residual mean=-0.000010 rms=0.001319 Jy/beam
! Combined flux in latest and established models = 0.301567 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 46 components and 0.301567 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940332 Jy
! Component: 100  -  total flux cleaned = 0.0167932 Jy
! Component: 150  -  total flux cleaned = 0.0226485 Jy
! Component: 200  -  total flux cleaned = 0.0273103 Jy
! Total flux subtracted in 200 components = 0.0273103 Jy
! Clean residual min=-0.002157 max=0.002769 Jy/beam
! Clean residual mean=-0.000004 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.328877 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 65 components and 0.328877 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00372975 Jy
! Component: 100  -  total flux cleaned = 0.00674201 Jy
! Component: 150  -  total flux cleaned = 0.00924314 Jy
! Component: 200  -  total flux cleaned = 0.0113373 Jy
! Total flux subtracted in 200 components = 0.0113373 Jy
! Clean residual min=-0.001524 max=0.001557 Jy/beam
! Clean residual mean=-0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.340215 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 88 components and 0.340215 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=2.611 mas, bpa=-7.113 degrees
! Estimated noise=0.287079 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308013 Jy
! Component: 100  -  total flux cleaned = 0.00501455 Jy
! Component: 150  -  total flux cleaned = 0.00649581 Jy
! Component: 200  -  total flux cleaned = 0.0077061 Jy
! Total flux subtracted in 200 components = 0.0077061 Jy
! Clean residual min=-0.001542 max=0.001425 Jy/beam
! Clean residual mean=-0.000001 rms=0.000383 Jy/beam
! Combined flux in latest and established models = 0.347921 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100967 Jy
! Component: 100  -  total flux cleaned = 0.00173328 Jy
! Component: 150  -  total flux cleaned = 0.00221559 Jy
! Component: 200  -  total flux cleaned = 0.00253754 Jy
! Total flux subtracted in 200 components = 0.00253754 Jy
! Clean residual min=-0.001362 max=0.001199 Jy/beam
! Clean residual mean=0.000000 rms=0.000339 Jy/beam
! Combined flux in latest and established models = 0.350458 Jy
! Adding 94 model components to the UV plane model.
! The established model now contains 154 components and 0.350458 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8843 mas, bmaj=1.748 mas, bpa=-5.959 degrees
! Estimated noise=0.225483 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00103082 Jy
! Component: 100  -  total flux cleaned = 0.00167696 Jy
! Component: 150  -  total flux cleaned = 0.00204963 Jy
! Component: 200  -  total flux cleaned = 0.002234 Jy
! Total flux subtracted in 200 components = 0.002234 Jy
! Clean residual min=-0.001264 max=0.001312 Jy/beam
! Clean residual mean=0.000000 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.352692 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 178 components and 0.352692 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Not correcting unselected IF 9.
! 
! Not correcting unselected IF 10.
! 
! Not correcting unselected IF 11.
! 
! Not correcting unselected IF 12.
! 
! Fit before self-cal, rms=0.062068Jy  sigma=1.410219
! Fit after  self-cal, rms=0.062059Jy  sigma=1.410012
wmodel /scr/pima/bg219h_uvs/J2312+3847_X_map.mod
! Writing 178 model components to file: /scr/pima/bg219h_uvs/J2312+3847_X_map.mod
wobs /scr/pima/bg219h_uvs/J2312+3847_X_uvs.fits
! Writing UV FITS file: /scr/pima/bg219h_uvs/J2312+3847_X_uvs.fits
wwins /scr/pima/bg219h_uvs/J2312+3847_X_map.win
! wwins: Wrote 8 windows to /scr/pima/bg219h_uvs/J2312+3847_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 6.80899e-05 Jy
! Component: 100  -  total flux cleaned = 0.000215631 Jy
! Component: 150  -  total flux cleaned = 0.000315119 Jy
! Component: 200  -  total flux cleaned = 0.000448306 Jy
! Component: 250  -  total flux cleaned = 0.00052111 Jy
! Component: 300  -  total flux cleaned = 0.000627333 Jy
! Component: 350  -  total flux cleaned = 0.000765788 Jy
! Component: 400  -  total flux cleaned = 0.000867062 Jy
! Component: 450  -  total flux cleaned = 0.000966299 Jy
! Component: 500  -  total flux cleaned = 0.00106358 Jy
! Component: 550  -  total flux cleaned = 0.00119064 Jy
! Component: 600  -  total flux cleaned = 0.00122151 Jy
! Component: 650  -  total flux cleaned = 0.00123679 Jy
! Component: 700  -  total flux cleaned = 0.00126723 Jy
! Component: 750  -  total flux cleaned = 0.00132647 Jy
! Component: 800  -  total flux cleaned = 0.00132648 Jy
! Component: 850  -  total flux cleaned = 0.00138434 Jy
! Component: 900  -  total flux cleaned = 0.00139829 Jy
! Component: 950  -  total flux cleaned = 0.00138416 Jy
! Component: 1000  -  total flux cleaned = 0.00139809 Jy
! Component: 1050  -  total flux cleaned = 0.0013981 Jy
! Component: 1100  -  total flux cleaned = 0.00145225 Jy
! Component: 1150  -  total flux cleaned = 0.00143893 Jy
! Component: 1200  -  total flux cleaned = 0.00141238 Jy
! Component: 1250  -  total flux cleaned = 0.00143864 Jy
! Component: 1300  -  total flux cleaned = 0.00145169 Jy
! Component: 1350  -  total flux cleaned = 0.00143905 Jy
! Component: 1400  -  total flux cleaned = 0.00146493 Jy
! Component: 1450  -  total flux cleaned = 0.00151543 Jy
! Component: 1500  -  total flux cleaned = 0.00150291 Jy
! Component: 1550  -  total flux cleaned = 0.00157744 Jy
! Component: 1600  -  total flux cleaned = 0.00161448 Jy
! Component: 1650  -  total flux cleaned = 0.00166313 Jy
! Component: 1700  -  total flux cleaned = 0.00169941 Jy
! Component: 1750  -  total flux cleaned = 0.00167546 Jy
! Component: 1800  -  total flux cleaned = 0.00166373 Jy
! Component: 1850  -  total flux cleaned = 0.00172267 Jy
! Component: 1900  -  total flux cleaned = 0.00174588 Jy
! Component: 1950  -  total flux cleaned = 0.00173429 Jy
! Component: 2000  -  total flux cleaned = 0.00175727 Jy
! Component: 2050  -  total flux cleaned = 0.00173451 Jy
! Component: 2100  -  total flux cleaned = 0.00181409 Jy
! Component: 2150  -  total flux cleaned = 0.00180282 Jy
! Component: 2200  -  total flux cleaned = 0.00180283 Jy
! Component: 2250  -  total flux cleaned = 0.00188053 Jy
! Component: 2300  -  total flux cleaned = 0.00186948 Jy
! Component: 2350  -  total flux cleaned = 0.00192425 Jy
! Component: 2400  -  total flux cleaned = 0.00190248 Jy
! Component: 2450  -  total flux cleaned = 0.001924 Jy
! Component: 2500  -  total flux cleaned = 0.00196711 Jy
! Component: 2550  -  total flux cleaned = 0.00200979 Jy
! Component: 2600  -  total flux cleaned = 0.00198851 Jy
! Component: 2650  -  total flux cleaned = 0.00202001 Jy
! Component: 2700  -  total flux cleaned = 0.00199897 Jy
! Component: 2750  -  total flux cleaned = 0.00204048 Jy
! Component: 2800  -  total flux cleaned = 0.00206109 Jy
! Component: 2850  -  total flux cleaned = 0.00208168 Jy
! Component: 2900  -  total flux cleaned = 0.00209195 Jy
! Component: 2950  -  total flux cleaned = 0.00214261 Jy
! Component: 3000  -  total flux cleaned = 0.00216258 Jy
! Component: 3050  -  total flux cleaned = 0.00220263 Jy
! Component: 3100  -  total flux cleaned = 0.00219274 Jy
! Component: 3150  -  total flux cleaned = 0.00223228 Jy
! Component: 3200  -  total flux cleaned = 0.0022422 Jy
! Component: 3250  -  total flux cleaned = 0.00226171 Jy
! Component: 3300  -  total flux cleaned = 0.00228111 Jy
! Component: 3350  -  total flux cleaned = 0.00232938 Jy
! Component: 3400  -  total flux cleaned = 0.00237737 Jy
! Component: 3450  -  total flux cleaned = 0.00235813 Jy
! Component: 3500  -  total flux cleaned = 0.00238658 Jy
! Component: 3550  -  total flux cleaned = 0.00241497 Jy
! Component: 3600  -  total flux cleaned = 0.00241493 Jy
! Component: 3650  -  total flux cleaned = 0.00244296 Jy
! Component: 3700  -  total flux cleaned = 0.00249871 Jy
! Component: 3750  -  total flux cleaned = 0.00248948 Jy
! Component: 3800  -  total flux cleaned = 0.00252627 Jy
! Component: 3850  -  total flux cleaned = 0.00255375 Jy
! Component: 3900  -  total flux cleaned = 0.00256283 Jy
! Component: 3950  -  total flux cleaned = 0.00258986 Jy
! Component: 4000  -  total flux cleaned = 0.00264384 Jy
! Component: 4050  -  total flux cleaned = 0.00266177 Jy
! Total flux subtracted in 4096 components = 0.00260837 Jy
! Clean residual min=-0.000601 max=0.000487 Jy/beam
! Clean residual mean=0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.3553 Jy
keep
! Adding 295 model components to the UV plane model.
! The established model now contains 473 components and 0.3553 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/bg219h_uvs/J2312+3847_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8843 x 1.748 at -5.959 degrees (North through East)
! Clean map  min=-0.00091146  max=0.14543 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2312+3847_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.145427 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000148426 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.306187 0.306187 0.612373 1.22475 2.44949 4.89899 9.79798 19.596 39.1919 78.3838
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0004 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.145 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  979.794 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2312+3847_X_uvs.log closed on Thu Apr  7 12:22:52 2016