! Started logfile: /scr/pima/bg219h_uvs/J2311+3425_X_dfm.log on Thu May 19 22:46:27 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2311+3425_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2311+3425_X_uva.fits
! AN table 1: 36 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.819753 visibilities/baseline/integration-bin.
! Found source: J2311+3425
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 15936 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2311+3425_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 40 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.187962Jy  sigma=23.849518
! Fit after  self-cal, rms=0.395574Jy  sigma=7.790093
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6768 mas, bmaj=1.4 mas, bpa=-4.628 degrees
! Estimated noise=0.664221 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.462653 Jy
! Component: 100  -  total flux cleaned = 0.567457 Jy
! Total flux subtracted in 100 components = 0.567457 Jy
! Clean residual min=-0.026890 max=0.043286 Jy/beam
! Clean residual mean=-0.000021 rms=0.005218 Jy/beam
! Combined flux in latest and established models = 0.567456 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.567456 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.153001Jy  sigma=3.003343
! Fit after  self-cal, rms=0.152753Jy  sigma=3.000628
! Inverting map 
! Added new window around map position (0.4, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0488739 Jy
! Component: 100  -  total flux cleaned = 0.0810986 Jy
! Total flux subtracted in 100 components = 0.0810986 Jy
! Clean residual min=-0.020383 max=0.020845 Jy/beam
! Clean residual mean=-0.000015 rms=0.003808 Jy/beam
! Combined flux in latest and established models = 0.648555 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 21 components and 0.648555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122562Jy  sigma=2.353502
! Fit after  self-cal, rms=0.121715Jy  sigma=2.341691
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8962 mas, bmaj=1.731 mas, bpa=-4.849 degrees
! Estimated noise=0.314158 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0465293 Jy
! Component: 100  -  total flux cleaned = 0.0746312 Jy
! Component: 150  -  total flux cleaned = 0.0939796 Jy
! Component: 200  -  total flux cleaned = 0.107995 Jy
! Total flux subtracted in 200 components = 0.107995 Jy
! Clean residual min=-0.010279 max=0.014699 Jy/beam
! Clean residual mean=-0.000024 rms=0.002811 Jy/beam
! Combined flux in latest and established models = 0.75655 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 58 components and 0.75655 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.100759Jy  sigma=1.882584
! Fit after  self-cal, rms=0.099891Jy  sigma=1.868124
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8962 x 1.731 at -4.849 degrees (North through East)
! Clean map  min=-0.0090674  max=0.61818 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.06     KP        1.00     
!   LA        0.98     MK        1.02     NL        1.00     OV        1.01     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        1.05     KP        0.98     
!   LA        0.97     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.01     HN        1.06     KP        1.00     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.98     HN        1.05     KP        0.99     
!   LA        0.96     MK        1.02     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.03     KP        0.98     
!   LA        0.96     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.05     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.00     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        1.05     KP        0.98     
!   LA        0.96     MK        1.00     NL        0.99     OV        1.00     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.03     KP        0.99     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        1.03     KP        0.98     
!   LA        0.96     MK        1.00     NL        0.98     OV        1.00     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        0.98     
!   LA        0.95     MK        1.02     NL        0.97     OV        1.00     
!   PT        0.97     SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.00     HN        0.98     KP        0.99     
!   LA        0.96     MK        1.01     NL        0.99     OV        0.99     
!   PT        0.96     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.95     MK        1.01     NL        0.98     OV        0.99     
!   PT        0.98     SC        0.99     
! 
! 
! Fit before self-cal, rms=0.099891Jy  sigma=1.868124
! Fit after  self-cal, rms=0.098157Jy  sigma=1.822139
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=1.745 mas, bpa=-4.586 degrees
! Estimated noise=0.311106 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.4, 10.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113211 Jy
! Component: 100  -  total flux cleaned = 0.0160328 Jy
! Component: 150  -  total flux cleaned = 0.0181115 Jy
! Component: 200  -  total flux cleaned = 0.0185296 Jy
! Total flux subtracted in 200 components = 0.0185296 Jy
! Clean residual min=-0.008743 max=0.009632 Jy/beam
! Clean residual mean=-0.000007 rms=0.002066 Jy/beam
! Combined flux in latest and established models = 0.77508 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 79 components and 0.77508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096285Jy  sigma=1.789074
! Fit after  self-cal, rms=0.096175Jy  sigma=1.786779
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.096175Jy  sigma=1.786779
! Fit after  self-cal, rms=0.092567Jy  sigma=1.713152
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9025 mas, bmaj=1.739 mas, bpa=-4.822 degrees
! Estimated noise=0.312359 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00229647 Jy
! Component: 100  -  total flux cleaned = 0.0023031 Jy
! Component: 150  -  total flux cleaned = 0.00292585 Jy
! Component: 200  -  total flux cleaned = 0.00325337 Jy
! Total flux subtracted in 200 components = 0.00325337 Jy
! Clean residual min=-0.005011 max=0.007257 Jy/beam
! Clean residual mean=-0.000001 rms=0.001212 Jy/beam
! Combined flux in latest and established models = 0.778333 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 94 components and 0.778333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092058Jy  sigma=1.703508
! Fit after  self-cal, rms=0.091992Jy  sigma=1.702257
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.6, 7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00693692 Jy
! Component: 100  -  total flux cleaned = 0.00904342 Jy
! Component: 150  -  total flux cleaned = 0.00966642 Jy
! Component: 200  -  total flux cleaned = 0.00986959 Jy
! Total flux subtracted in 200 components = 0.00986959 Jy
! Clean residual min=-0.004209 max=0.005369 Jy/beam
! Clean residual mean=0.000000 rms=0.001036 Jy/beam
! Combined flux in latest and established models = 0.788203 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.788203 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091383Jy  sigma=1.690083
! Fit after  self-cal, rms=0.091330Jy  sigma=1.689079
! Inverting map 
! Added new window around map position (3.4, 5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052273 Jy
! Component: 100  -  total flux cleaned = 0.00796304 Jy
! Component: 150  -  total flux cleaned = 0.00874775 Jy
! Component: 200  -  total flux cleaned = 0.00908674 Jy
! Total flux subtracted in 200 components = 0.00908674 Jy
! Clean residual min=-0.003692 max=0.003614 Jy/beam
! Clean residual mean=0.000000 rms=0.000884 Jy/beam
! Combined flux in latest and established models = 0.797289 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 139 components and 0.79729 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090970Jy  sigma=1.681501
! Fit after  self-cal, rms=0.090947Jy  sigma=1.681152
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090947Jy  sigma=1.681152
! Fit after  self-cal, rms=0.090911Jy  sigma=1.680145
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9023 mas, bmaj=1.738 mas, bpa=-4.787 degrees
! Estimated noise=0.312101 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000677975 Jy
! Component: 100  -  total flux cleaned = 0.00133534 Jy
! Component: 150  -  total flux cleaned = 0.00155776 Jy
! Component: 200  -  total flux cleaned = 0.00176278 Jy
! Total flux subtracted in 200 components = 0.00176278 Jy
! Clean residual min=-0.003392 max=0.003441 Jy/beam
! Clean residual mean=0.000000 rms=0.000811 Jy/beam
! Combined flux in latest and established models = 0.799052 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 148 components and 0.799053 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090790Jy  sigma=1.677570
! Fit after  self-cal, rms=0.090775Jy  sigma=1.677385
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.91347e-05 Jy
! Component: 100  -  total flux cleaned = 0.000224856 Jy
! Component: 150  -  total flux cleaned = 0.000398255 Jy
! Component: 200  -  total flux cleaned = 0.000507042 Jy
! Total flux subtracted in 200 components = 0.000507042 Jy
! Clean residual min=-0.003226 max=0.003441 Jy/beam
! Clean residual mean=0.000000 rms=0.000786 Jy/beam
! Combined flux in latest and established models = 0.79956 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 157 components and 0.799559 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090703Jy  sigma=1.675839
! Fit after  self-cal, rms=0.090693Jy  sigma=1.675730
! Inverting map 
! Added new window around map position (-9.8, 49).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00322163 Jy
! Component: 100  -  total flux cleaned = 0.00492636 Jy
! Component: 150  -  total flux cleaned = 0.00614755 Jy
! Component: 200  -  total flux cleaned = 0.0069485 Jy
! Total flux subtracted in 200 components = 0.0069485 Jy
! Clean residual min=-0.003002 max=0.002962 Jy/beam
! Clean residual mean=-0.000001 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.806508 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 176 components and 0.806508 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090536Jy  sigma=1.672961
! Fit after  self-cal, rms=0.090528Jy  sigma=1.672839
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090528Jy  sigma=1.672839
! Fit after  self-cal, rms=0.090502Jy  sigma=1.672510
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=2.719 mas, bpa=-7.777 degrees
! Estimated noise=0.393455 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000135067 Jy
! Component: 100  -  total flux cleaned = 0.000777668 Jy
! Component: 150  -  total flux cleaned = 0.00139088 Jy
! Component: 200  -  total flux cleaned = 0.0020955 Jy
! Total flux subtracted in 200 components = 0.0020955 Jy
! Clean residual min=-0.003679 max=0.003834 Jy/beam
! Clean residual mean=-0.000001 rms=0.001024 Jy/beam
! Combined flux in latest and established models = 0.808603 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 196 components and 0.808603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090451Jy  sigma=1.671508
! Fit after  self-cal, rms=0.090440Jy  sigma=1.671351
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.92646e-05 Jy
! Component: 100  -  total flux cleaned = 0.000358545 Jy
! Component: 150  -  total flux cleaned = 0.000804121 Jy
! Component: 200  -  total flux cleaned = 0.00137344 Jy
! Total flux subtracted in 200 components = 0.00137344 Jy
! Clean residual min=-0.003548 max=0.003673 Jy/beam
! Clean residual mean=-0.000001 rms=0.000993 Jy/beam
! Combined flux in latest and established models = 0.809977 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 206 components and 0.809977 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090420Jy  sigma=1.670879
! Fit after  self-cal, rms=0.090412Jy  sigma=1.670766
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9022 mas, bmaj=1.738 mas, bpa=-4.772 degrees
! Estimated noise=0.311949 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9022 x 1.738 at -4.772 degrees (North through East)
! Clean map  min=-0.0041318  max=0.61208 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.090412Jy  sigma=1.670766
! Fit after  self-cal, rms=0.085866Jy  sigma=1.585126
! Inverting map and beam 
! Estimated beam: bmin=0.9042 mas, bmaj=1.74 mas, bpa=-4.767 degrees
! Estimated noise=0.30748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00720084 Jy
! Component: 100  -  total flux cleaned = -0.0100936 Jy
! Component: 150  -  total flux cleaned = -0.0113189 Jy
! Component: 200  -  total flux cleaned = -0.011585 Jy
! Total flux subtracted in 200 components = -0.011585 Jy
! Clean residual min=-0.003503 max=0.003076 Jy/beam
! Clean residual mean=-0.000002 rms=0.000762 Jy/beam
! Combined flux in latest and established models = 0.798392 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 222 components and 0.798392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085226Jy  sigma=1.573276
! Fit after  self-cal, rms=0.085215Jy  sigma=1.573090
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000453452 Jy
! Component: 100  -  total flux cleaned = -0.000295295 Jy
! Component: 150  -  total flux cleaned = -0.000100714 Jy
! Component: 200  -  total flux cleaned = 3.06615e-05 Jy
! Total flux subtracted in 200 components = 3.06615e-05 Jy
! Clean residual min=-0.003384 max=0.002912 Jy/beam
! Clean residual mean=-0.000002 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.798422 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 233 components and 0.798422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085151Jy  sigma=1.571996
! Fit after  self-cal, rms=0.085147Jy  sigma=1.571933
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085147Jy  sigma=1.571933
! Fit after  self-cal, rms=0.084186Jy  sigma=1.561882
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.684 mas, bmaj=1.402 mas, bpa=-4.703 degrees
! Estimated noise=0.651919 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.453942 Jy
! Component: 100  -  total flux cleaned = 0.559684 Jy
! Component: 150  -  total flux cleaned = 0.609382 Jy
! Component: 200  -  total flux cleaned = 0.640742 Jy
! Total flux subtracted in 200 components = 0.640742 Jy
! Clean residual min=-0.010895 max=0.016841 Jy/beam
! Clean residual mean=-0.000010 rms=0.002788 Jy/beam
! Combined flux in latest and established models = 0.640741 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.640741 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9058 mas, bmaj=1.741 mas, bpa=-4.792 degrees
! Estimated noise=0.303621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0357818 Jy
! Component: 100  -  total flux cleaned = 0.0572512 Jy
! Component: 150  -  total flux cleaned = 0.0713996 Jy
! Component: 200  -  total flux cleaned = 0.0817325 Jy
! Total flux subtracted in 200 components = 0.0817325 Jy
! Clean residual min=-0.005490 max=0.007443 Jy/beam
! Clean residual mean=-0.000012 rms=0.001595 Jy/beam
! Combined flux in latest and established models = 0.722474 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 57 components and 0.722474 Jy
! Inverting map 
! Added new window around map position (0.4, 3.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00879494 Jy
! Component: 100  -  total flux cleaned = 0.015842 Jy
! Component: 150  -  total flux cleaned = 0.0217762 Jy
! Component: 200  -  total flux cleaned = 0.0268579 Jy
! Total flux subtracted in 200 components = 0.0268579 Jy
! Clean residual min=-0.004356 max=0.004108 Jy/beam
! Clean residual mean=-0.000007 rms=0.001085 Jy/beam
! Combined flux in latest and established models = 0.749332 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 86 components and 0.749332 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.141 mas, bmaj=2.718 mas, bpa=-8.033 degrees
! Estimated noise=0.381682 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00731698 Jy
! Component: 100  -  total flux cleaned = 0.0123313 Jy
! Component: 150  -  total flux cleaned = 0.0163881 Jy
! Component: 200  -  total flux cleaned = 0.0197517 Jy
! Total flux subtracted in 200 components = 0.0197517 Jy
! Clean residual min=-0.005245 max=0.005086 Jy/beam
! Clean residual mean=-0.000009 rms=0.001439 Jy/beam
! Combined flux in latest and established models = 0.769084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00285905 Jy
! Component: 100  -  total flux cleaned = 0.00533291 Jy
! Component: 150  -  total flux cleaned = 0.00732087 Jy
! Component: 200  -  total flux cleaned = 0.00884575 Jy
! Total flux subtracted in 200 components = 0.00884575 Jy
! Clean residual min=-0.004451 max=0.004468 Jy/beam
! Clean residual mean=-0.000007 rms=0.001297 Jy/beam
! Combined flux in latest and established models = 0.777929 Jy
! Adding 87 model components to the UV plane model.
! The established model now contains 157 components and 0.777929 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9058 mas, bmaj=1.741 mas, bpa=-4.792 degrees
! Estimated noise=0.303621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219124 Jy
! Component: 100  -  total flux cleaned = 0.00115688 Jy
! Component: 150  -  total flux cleaned = 0.00183745 Jy
! Component: 200  -  total flux cleaned = 0.00232731 Jy
! Total flux subtracted in 200 components = 0.00232731 Jy
! Clean residual min=-0.003596 max=0.003224 Jy/beam
! Clean residual mean=-0.000003 rms=0.000750 Jy/beam
! Combined flux in latest and established models = 0.780257 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 182 components and 0.780257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083823Jy  sigma=1.553976
! Fit after  self-cal, rms=0.083756Jy  sigma=1.552681
wmodel /J2311+3425_X_map.mod
! wmodel: Unable to open new model file: /J2311+3425_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2311+3425_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9058 x 1.741 at -4.792 degrees (North through East)
! Clean map  min=-0.0033108  max=0.59961 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2311+3425_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.599612 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000742598 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371539 0.371539 0.743078 1.48616 2.97231 5.94463 11.8893 23.7785 47.557 95.114
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0022 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.599 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  807.451 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2311+3425_X_dfm.log closed on Thu May 19 22:46:30 2016