! Started logfile: /scr/pima/bg219h_uvs/J2308+2008_X_dfm.log on Thu May 19 22:46:18 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2308+2008_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2308+2008_X_uva.fits
! AN table 1: 48 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.927778 visibilities/baseline/integration-bin.
! Found source: J2308+2008
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 24048 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2308+2008_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.025748Jy  sigma=23.987020
! Fit after  self-cal, rms=0.798658Jy  sigma=18.664591
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7125 mas, bmaj=1.528 mas, bpa=-1.961 degrees
! Estimated noise=0.417907 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.147371 Jy
! Component: 100  -  total flux cleaned = 0.191277 Jy
! Total flux subtracted in 100 components = 0.191277 Jy
! Clean residual min=-0.011953 max=0.041096 Jy/beam
! Clean residual mean=-0.000009 rms=0.003287 Jy/beam
! Combined flux in latest and established models = 0.191277 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.191277 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.099849Jy  sigma=2.261254
! Fit after  self-cal, rms=0.099712Jy  sigma=2.257908
! Inverting map 
! Added new window around map position (-2.6, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0351552 Jy
! Component: 100  -  total flux cleaned = 0.0541561 Jy
! Total flux subtracted in 100 components = 0.0541561 Jy
! Clean residual min=-0.008891 max=0.017157 Jy/beam
! Clean residual mean=-0.000005 rms=0.002133 Jy/beam
! Combined flux in latest and established models = 0.245433 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 17 components and 0.245433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.081757Jy  sigma=1.803697
! Fit after  self-cal, rms=0.080703Jy  sigma=1.774854
! Inverting map 
! Added new window around map position (-1.2, -0.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.018627 Jy
! Component: 100  -  total flux cleaned = 0.0312309 Jy
! Total flux subtracted in 100 components = 0.0312309 Jy
! Clean residual min=-0.006092 max=0.008251 Jy/beam
! Clean residual mean=-0.000003 rms=0.001447 Jy/beam
! Combined flux in latest and established models = 0.276664 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 29 components and 0.276664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.073250Jy  sigma=1.583363
! Fit after  self-cal, rms=0.072954Jy  sigma=1.575365
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108873 Jy
! Component: 100  -  total flux cleaned = 0.0188417 Jy
! Total flux subtracted in 100 components = 0.0188417 Jy
! Clean residual min=-0.005000 max=0.005958 Jy/beam
! Clean residual mean=-0.000001 rms=0.001123 Jy/beam
! Combined flux in latest and established models = 0.295505 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 36 components and 0.295505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.069985Jy  sigma=1.498344
! Fit after  self-cal, rms=0.069892Jy  sigma=1.495720
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9148 mas, bmaj=1.853 mas, bpa=-1.83 degrees
! Estimated noise=0.1995 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.011449 Jy
! Component: 100  -  total flux cleaned = 0.0188278 Jy
! Component: 150  -  total flux cleaned = 0.0239984 Jy
! Component: 200  -  total flux cleaned = 0.0277482 Jy
! Total flux subtracted in 200 components = 0.0277482 Jy
! Clean residual min=-0.003733 max=0.005882 Jy/beam
! Clean residual mean=0.000002 rms=0.000973 Jy/beam
! Combined flux in latest and established models = 0.323254 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 72 components and 0.323253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.067705Jy  sigma=1.439952
! Fit after  self-cal, rms=0.067578Jy  sigma=1.436447
! Inverting map 
! Added new window around map position (-4.2, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00603597 Jy
! Component: 100  -  total flux cleaned = 0.00933709 Jy
! Component: 150  -  total flux cleaned = 0.0106188 Jy
! Component: 200  -  total flux cleaned = 0.0113799 Jy
! Total flux subtracted in 200 components = 0.0113799 Jy
! Clean residual min=-0.003218 max=0.003998 Jy/beam
! Clean residual mean=0.000002 rms=0.000752 Jy/beam
! Combined flux in latest and established models = 0.334633 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 101 components and 0.334633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066991Jy  sigma=1.420931
! Fit after  self-cal, rms=0.066908Jy  sigma=1.418524
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9148 x 1.853 at -1.83 degrees (North through East)
! Clean map  min=-0.0026754  max=0.19337 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.04     OV        1.01     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.99     HN        1.03     KP        0.98     
!   LA        0.98     MK        1.01     NL        1.02     OV        1.02     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.99     HN        1.03     KP        1.01     
!   LA        0.98     MK        1.02     NL        1.02     OV        1.02     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.05     KP        0.98     
!   LA        0.98     MK        1.00     NL        1.03     OV        1.02     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.99     HN        1.03     KP        0.99     
!   LA        0.99     MK        0.99     NL        1.02     OV        1.00     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.03     KP        1.01     
!   LA        0.97     MK        0.99     NL        1.02     OV        0.99     
!   PT        0.99     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.98     MK        0.99     NL        1.01     OV        0.99     
!   PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.04     KP        0.99     
!   LA        0.97     MK        1.01     NL        1.03     OV        1.02     
!   PT        0.99     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        1.04     KP        0.98     
!   LA        0.98     MK        0.98     NL        1.01     OV        1.01     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.00     KP        0.99     
!   LA        0.98     MK        0.96     NL        1.02     OV        1.00     
!   PT        1.01     SC        0.99     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.01     HN        1.05     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.00     OV        0.99     
!   PT        0.99     SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.02     KP        1.00     
!   LA        0.98     MK        1.00     NL        1.01     OV        1.02     
!   PT        1.00     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.066908Jy  sigma=1.418524
! Fit after  self-cal, rms=0.066988Jy  sigma=1.412994
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9152 mas, bmaj=1.854 mas, bpa=-1.689 degrees
! Estimated noise=0.198997 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000285923 Jy
! Component: 100  -  total flux cleaned = -0.000144662 Jy
! Component: 150  -  total flux cleaned = -2.24425e-05 Jy
! Component: 200  -  total flux cleaned = 0.000149315 Jy
! Total flux subtracted in 200 components = 0.000149315 Jy
! Clean residual min=-0.002577 max=0.002781 Jy/beam
! Clean residual mean=0.000003 rms=0.000635 Jy/beam
! Combined flux in latest and established models = 0.334783 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 111 components and 0.334783 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066821Jy  sigma=1.409429
! Fit after  self-cal, rms=0.066820Jy  sigma=1.409165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066820Jy  sigma=1.409165
! Fit after  self-cal, rms=0.066680Jy  sigma=1.394745
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9173 mas, bmaj=1.843 mas, bpa=-1.794 degrees
! Estimated noise=0.198658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000922826 Jy
! Component: 100  -  total flux cleaned = 0.00124921 Jy
! Component: 150  -  total flux cleaned = 0.00132474 Jy
! Component: 200  -  total flux cleaned = 0.00142276 Jy
! Total flux subtracted in 200 components = 0.00142276 Jy
! Clean residual min=-0.001492 max=0.001711 Jy/beam
! Clean residual mean=-0.000003 rms=0.000365 Jy/beam
! Combined flux in latest and established models = 0.336205 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 123 components and 0.336205 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066618Jy  sigma=1.393404
! Fit after  self-cal, rms=0.066623Jy  sigma=1.393229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-6, 43.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00142425 Jy
! Component: 100  -  total flux cleaned = 0.00174793 Jy
! Component: 150  -  total flux cleaned = 0.00196432 Jy
! Component: 200  -  total flux cleaned = 0.00210251 Jy
! Total flux subtracted in 200 components = 0.00210251 Jy
! Clean residual min=-0.001506 max=0.001497 Jy/beam
! Clean residual mean=-0.000003 rms=0.000338 Jy/beam
! Combined flux in latest and established models = 0.338308 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 136 components and 0.338308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066580Jy  sigma=1.392124
! Fit after  self-cal, rms=0.066577Jy  sigma=1.392067
! Inverting map 
! Added new window around map position (23.8, 46.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125177 Jy
! Component: 100  -  total flux cleaned = 0.00185759 Jy
! Component: 150  -  total flux cleaned = 0.00223088 Jy
! Component: 200  -  total flux cleaned = 0.00249985 Jy
! Total flux subtracted in 200 components = 0.00249985 Jy
! Clean residual min=-0.001426 max=0.001197 Jy/beam
! Clean residual mean=-0.000003 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.340808 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 147 components and 0.340808 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066545Jy  sigma=1.391268
! Fit after  self-cal, rms=0.066543Jy  sigma=1.391242
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066543Jy  sigma=1.391242
! Fit after  self-cal, rms=0.066646Jy  sigma=1.391065
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9177 mas, bmaj=1.841 mas, bpa=-1.788 degrees
! Estimated noise=0.198487 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.83163e-05 Jy
! Component: 100  -  total flux cleaned = 0.000476804 Jy
! Component: 150  -  total flux cleaned = 0.000691527 Jy
! Component: 200  -  total flux cleaned = 0.000936458 Jy
! Total flux subtracted in 200 components = 0.000936458 Jy
! Clean residual min=-0.001410 max=0.001122 Jy/beam
! Clean residual mean=-0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.341744 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 157 components and 0.341744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066627Jy  sigma=1.390657
! Fit after  self-cal, rms=0.066627Jy  sigma=1.390639
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00019475 Jy
! Component: 100  -  total flux cleaned = 0.000339659 Jy
! Component: 150  -  total flux cleaned = 0.000476044 Jy
! Component: 200  -  total flux cleaned = 0.000550442 Jy
! Total flux subtracted in 200 components = 0.000550442 Jy
! Clean residual min=-0.001399 max=0.001110 Jy/beam
! Clean residual mean=-0.000002 rms=0.000301 Jy/beam
! Combined flux in latest and established models = 0.342295 Jy
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 167 components and 0.342295 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066615Jy  sigma=1.390382
! Fit after  self-cal, rms=0.066615Jy  sigma=1.390371
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066615Jy  sigma=1.390371
! Fit after  self-cal, rms=0.066661Jy  sigma=1.390337
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=2.825 mas, bpa=-4.164 degrees
! Estimated noise=0.248078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000403799 Jy
! Component: 100  -  total flux cleaned = 0.00060705 Jy
! Component: 150  -  total flux cleaned = 0.000655902 Jy
! Component: 200  -  total flux cleaned = 0.000656687 Jy
! Total flux subtracted in 200 components = 0.000656687 Jy
! Clean residual min=-0.001449 max=0.001680 Jy/beam
! Clean residual mean=-0.000005 rms=0.000401 Jy/beam
! Combined flux in latest and established models = 0.342951 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 189 components and 0.342951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066657Jy  sigma=1.390198
! Fit after  self-cal, rms=0.066657Jy  sigma=1.390183
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.59818e-05 Jy
! Component: 100  -  total flux cleaned = 6.92701e-05 Jy
! Component: 150  -  total flux cleaned = 6.95528e-05 Jy
! Component: 200  -  total flux cleaned = 9.0345e-05 Jy
! Total flux subtracted in 200 components = 9.0345e-05 Jy
! Clean residual min=-0.001453 max=0.001640 Jy/beam
! Clean residual mean=-0.000005 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.343041 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 200 components and 0.343041 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066655Jy  sigma=1.390119
! Fit after  self-cal, rms=0.066655Jy  sigma=1.390110
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=1.841 mas, bpa=-1.786 degrees
! Estimated noise=0.198371 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9178 x 1.841 at -1.786 degrees (North through East)
! Clean map  min=-0.0012273  max=0.1921 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7127 mas, bmaj=1.513 mas, bpa=-2.034 degrees
! Estimated noise=0.416201 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.146408 Jy
! Component: 100  -  total flux cleaned = 0.199379 Jy
! Component: 150  -  total flux cleaned = 0.230815 Jy
! Component: 200  -  total flux cleaned = 0.252702 Jy
! Total flux subtracted in 200 components = 0.252702 Jy
! Clean residual min=-0.006143 max=0.012461 Jy/beam
! Clean residual mean=-0.000005 rms=0.001743 Jy/beam
! Combined flux in latest and established models = 0.252701 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.252701 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=1.841 mas, bpa=-1.786 degrees
! Estimated noise=0.198371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0253603 Jy
! Component: 100  -  total flux cleaned = 0.0415417 Jy
! Component: 150  -  total flux cleaned = 0.0527259 Jy
! Component: 200  -  total flux cleaned = 0.0607381 Jy
! Total flux subtracted in 200 components = 0.0607381 Jy
! Clean residual min=-0.002537 max=0.004510 Jy/beam
! Clean residual mean=-0.000006 rms=0.000787 Jy/beam
! Combined flux in latest and established models = 0.31344 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 47 components and 0.31344 Jy
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00585222 Jy
! Component: 100  -  total flux cleaned = 0.0102022 Jy
! Component: 150  -  total flux cleaned = 0.0135211 Jy
! Component: 200  -  total flux cleaned = 0.0161529 Jy
! Total flux subtracted in 200 components = 0.0161529 Jy
! Clean residual min=-0.001689 max=0.001989 Jy/beam
! Clean residual mean=-0.000004 rms=0.000436 Jy/beam
! Combined flux in latest and established models = 0.329592 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 74 components and 0.329592 Jy
! Inverting map 
! Added new window around map position (-11.8, 8.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223629 Jy
! Component: 100  -  total flux cleaned = 0.00370106 Jy
! Component: 150  -  total flux cleaned = 0.00479269 Jy
! Component: 200  -  total flux cleaned = 0.00576845 Jy
! Total flux subtracted in 200 components = 0.00576845 Jy
! Clean residual min=-0.001443 max=0.001479 Jy/beam
! Clean residual mean=-0.000003 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.335361 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 95 components and 0.335361 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.086 mas, bmaj=2.825 mas, bpa=-4.164 degrees
! Estimated noise=0.248078 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00199228 Jy
! Component: 100  -  total flux cleaned = 0.00341865 Jy
! Component: 150  -  total flux cleaned = 0.00455113 Jy
! Component: 200  -  total flux cleaned = 0.00547951 Jy
! Total flux subtracted in 200 components = 0.00547951 Jy
! Clean residual min=-0.001596 max=0.001500 Jy/beam
! Clean residual mean=-0.000004 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.34084 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000768868 Jy
! Component: 100  -  total flux cleaned = 0.00103571 Jy
! Component: 150  -  total flux cleaned = 0.00120471 Jy
! Component: 200  -  total flux cleaned = 0.00136018 Jy
! Total flux subtracted in 200 components = 0.00136018 Jy
! Clean residual min=-0.001542 max=0.001399 Jy/beam
! Clean residual mean=-0.000003 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.342201 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 164 components and 0.342201 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9178 mas, bmaj=1.841 mas, bpa=-1.786 degrees
! Estimated noise=0.198371 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000443846 Jy
! Component: 100  -  total flux cleaned = -0.000343319 Jy
! Component: 150  -  total flux cleaned = -0.000281487 Jy
! Component: 200  -  total flux cleaned = -0.000113125 Jy
! Total flux subtracted in 200 components = -0.000113125 Jy
! Clean residual min=-0.001175 max=0.001209 Jy/beam
! Clean residual mean=-0.000001 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.342087 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 183 components and 0.342087 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066668Jy  sigma=1.390329
! Fit after  self-cal, rms=0.066652Jy  sigma=1.389967
wmodel /J2308+2008_X_map.mod
! wmodel: Unable to open new model file: /J2308+2008_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2308+2008_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9178 x 1.841 at -1.786 degrees (North through East)
! Clean map  min=-0.0010911  max=0.1919 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2308+2008_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.1919 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000290243 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.453741 0.453741 0.907481 1.81496 3.62993 7.25985 14.5197 29.0394 58.0788
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.191 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  661.17 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2308+2008_X_dfm.log closed on Thu May 19 22:46:22 2016