! Started logfile: /scr/pima/bg219h_uvs/J2251+4030_S_dfm.log on Thu May 19 22:45:32 2016 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.22000 obs /scr/pima/bg219h_uvs/J2251+4030_S_uva.fits ! Reading UV FITS file: /scr/pima/bg219h_uvs/J2251+4030_S_uva.fits ! AN table 1: 61 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.902095 visibilities/baseline/integration-bin. ! Found source: J2251+4030 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.22e+09 3.2e+07 1 3.2e+07 ! 02 2 2.252e+09 3.2e+07 1 3.2e+07 ! 03 3 2.284e+09 3.2e+07 1 3.2e+07 ! 04 4 2.348e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 54 lines of history. ! ! Reading 7924 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2251+4030_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002687Jy sigma=25.644471 ! Fit after self-cal, rms=0.950367Jy sigma=24.288069 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.935 mas, bmaj=5.12 mas, bpa=-14.82 degrees ! Estimated noise=0.536836 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386109 Jy ! Component: 100 - total flux cleaned = 0.0476228 Jy ! Total flux subtracted in 100 components = 0.0476228 Jy ! Clean residual min=-0.003259 max=0.003969 Jy/beam ! Clean residual mean=0.000006 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.0476228 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0476228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057457Jy sigma=1.369597 ! Fit after self-cal, rms=0.056181Jy sigma=1.338334 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.554 mas, bmaj=5.835 mas, bpa=-11.61 degrees ! Estimated noise=0.334115 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575774 Jy ! Component: 100 - total flux cleaned = 0.00852292 Jy ! Component: 150 - total flux cleaned = 0.0101605 Jy ! Component: 200 - total flux cleaned = 0.0111957 Jy ! Total flux subtracted in 200 components = 0.0111957 Jy ! Clean residual min=-0.002223 max=0.002445 Jy/beam ! Clean residual mean=0.000003 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0588185 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 29 components and 0.0588185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055622Jy sigma=1.322719 ! Fit after self-cal, rms=0.055632Jy sigma=1.322335 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.554 x 5.835 at -11.61 degrees (North through East) ! Clean map min=-0.0021652 max=0.052282 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 HN 0.99 KP 0.96 LA 0.91 ! MK 1.03 NL 0.95 OV 0.99 PT 1.00 ! SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 1.05 KP 1.04 LA 1.01 ! MK 1.02 NL 0.93 OV 1.02 PT 0.97 ! SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 HN 0.94 KP 1.04 LA 1.03 ! MK 1.00 NL 1.04 OV 1.02 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 HN 1.03 KP 1.01 LA 0.98 ! MK 1.00 NL 1.03 OV 1.01 PT 0.98 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.055632Jy sigma=1.322335 ! Fit after self-cal, rms=0.054993Jy sigma=1.320195 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=5.84 mas, bpa=-11.18 degrees ! Estimated noise=0.331525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415624 Jy ! Component: 100 - total flux cleaned = 0.000538927 Jy ! Component: 150 - total flux cleaned = 0.000583266 Jy ! Component: 200 - total flux cleaned = 0.000623207 Jy ! Total flux subtracted in 200 components = 0.000623207 Jy ! Clean residual min=-0.002215 max=0.002250 Jy/beam ! Clean residual mean=0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.0594417 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0594417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054982Jy sigma=1.319911 ! Fit after self-cal, rms=0.054987Jy sigma=1.319578 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054987Jy sigma=1.319578 ! Fit after self-cal, rms=0.055151Jy sigma=1.317520 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.555 mas, bmaj=5.826 mas, bpa=-11.57 degrees ! Estimated noise=0.332305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000522921 Jy ! Component: 100 - total flux cleaned = 0.000630704 Jy ! Component: 150 - total flux cleaned = 0.000652668 Jy ! Component: 200 - total flux cleaned = 0.000652399 Jy ! Total flux subtracted in 200 components = 0.000652399 Jy ! Clean residual min=-0.002130 max=0.001993 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0600941 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 38 components and 0.0600941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055145Jy sigma=1.317344 ! Fit after self-cal, rms=0.055166Jy sigma=1.317160 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.60245e-05 Jy ! Component: 100 - total flux cleaned = 6.6774e-05 Jy ! Component: 150 - total flux cleaned = 7.61774e-05 Jy ! Component: 200 - total flux cleaned = 7.59219e-05 Jy ! Total flux subtracted in 200 components = 7.59219e-05 Jy ! Clean residual min=-0.002148 max=0.002002 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.06017 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.06017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055163Jy sigma=1.317072 ! Fit after self-cal, rms=0.055165Jy sigma=1.317060 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055165Jy sigma=1.317060 ! Fit after self-cal, rms=0.055162Jy sigma=1.317021 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.548 mas, bmaj=5.811 mas, bpa=-11.63 degrees ! Estimated noise=0.332524 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000352412 Jy ! Component: 100 - total flux cleaned = 0.000389415 Jy ! Component: 150 - total flux cleaned = 0.000398132 Jy ! Component: 200 - total flux cleaned = 0.000405738 Jy ! Total flux subtracted in 200 components = 0.000405738 Jy ! Clean residual min=-0.002155 max=0.001982 Jy/beam ! Clean residual mean=0.000002 rms=0.000480 Jy/beam ! Combined flux in latest and established models = 0.0605758 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 39 components and 0.0605758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055159Jy sigma=1.316935 ! Fit after self-cal, rms=0.055161Jy sigma=1.316923 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.10774e-05 Jy ! Component: 100 - total flux cleaned = 2.07915e-05 Jy ! Component: 150 - total flux cleaned = 2.80352e-05 Jy ! Component: 200 - total flux cleaned = 2.77573e-05 Jy ! Total flux subtracted in 200 components = 2.77573e-05 Jy ! Clean residual min=-0.002162 max=0.001975 Jy/beam ! Clean residual mean=0.000002 rms=0.000479 Jy/beam ! Combined flux in latest and established models = 0.0606035 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.0606035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055159Jy sigma=1.316874 ! Fit after self-cal, rms=0.055160Jy sigma=1.316870 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055160Jy sigma=1.316870 ! Fit after self-cal, rms=0.055152Jy sigma=1.316854 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.981 mas, bmaj=9.159 mas, bpa=-12.49 degrees ! Estimated noise=0.415737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000768505 Jy ! Component: 100 - total flux cleaned = 0.000879254 Jy ! Component: 150 - total flux cleaned = 0.00095423 Jy ! Component: 200 - total flux cleaned = 0.00101081 Jy ! Total flux subtracted in 200 components = 0.00101081 Jy ! Clean residual min=-0.001902 max=0.001985 Jy/beam ! Clean residual mean=0.000004 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0616143 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 44 components and 0.0616143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055163Jy sigma=1.317095 ! Fit after self-cal, rms=0.055157Jy sigma=1.316922 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68882e-05 Jy ! Component: 100 - total flux cleaned = 0.000122171 Jy ! Component: 150 - total flux cleaned = 0.000172521 Jy ! Component: 200 - total flux cleaned = 0.000187389 Jy ! Total flux subtracted in 200 components = 0.000187389 Jy ! Clean residual min=-0.001881 max=0.001889 Jy/beam ! Clean residual mean=0.000003 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0618017 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.0618017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055168Jy sigma=1.317213 ! Fit after self-cal, rms=0.055165Jy sigma=1.317137 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=5.8 mas, bpa=-11.68 degrees ! Estimated noise=0.332672 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 5.8 at -11.68 degrees (North through East) ! Clean map min=-0.0020812 max=0.051679 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.921 mas, bmaj=5.087 mas, bpa=-15.01 degrees ! Estimated noise=0.534946 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.039664 Jy ! Component: 100 - total flux cleaned = 0.0491985 Jy ! Component: 150 - total flux cleaned = 0.0532953 Jy ! Component: 200 - total flux cleaned = 0.0556912 Jy ! Total flux subtracted in 200 components = 0.0556912 Jy ! Clean residual min=-0.003195 max=0.003127 Jy/beam ! Clean residual mean=0.000003 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.0556912 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0556912 Jy ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=5.8 mas, bpa=-11.68 degrees ! Estimated noise=0.332672 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210967 Jy ! Component: 100 - total flux cleaned = 0.00337204 Jy ! Component: 150 - total flux cleaned = 0.00415547 Jy ! Component: 200 - total flux cleaned = 0.00432481 Jy ! Total flux subtracted in 200 components = 0.00432481 Jy ! Clean residual min=-0.002169 max=0.001977 Jy/beam ! Clean residual mean=0.000003 rms=0.000490 Jy/beam ! Combined flux in latest and established models = 0.060016 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.060016 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.981 mas, bmaj=9.159 mas, bpa=-12.49 degrees ! Estimated noise=0.415737 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104375 Jy ! Component: 100 - total flux cleaned = 0.00119713 Jy ! Component: 150 - total flux cleaned = 0.00127092 Jy ! Component: 200 - total flux cleaned = 0.00133155 Jy ! Total flux subtracted in 200 components = 0.00133155 Jy ! Clean residual min=-0.001955 max=0.002035 Jy/beam ! Clean residual mean=0.000004 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0613476 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.8945e-05 Jy ! Component: 100 - total flux cleaned = 8.36251e-05 Jy ! Component: 150 - total flux cleaned = 0.000123655 Jy ! Component: 200 - total flux cleaned = 0.000150725 Jy ! Total flux subtracted in 200 components = 0.000150725 Jy ! Clean residual min=-0.001924 max=0.001963 Jy/beam ! Clean residual mean=0.000004 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0614983 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0614983 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.544 mas, bmaj=5.8 mas, bpa=-11.68 degrees ! Estimated noise=0.332672 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000257531 Jy ! Component: 100 - total flux cleaned = -0.000395348 Jy ! Component: 150 - total flux cleaned = -0.000541656 Jy ! Component: 200 - total flux cleaned = -0.000605085 Jy ! Total flux subtracted in 200 components = -0.000605085 Jy ! Clean residual min=-0.002148 max=0.001951 Jy/beam ! Clean residual mean=0.000002 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.0608932 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.0608932 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055161Jy sigma=1.317114 ! Fit after self-cal, rms=0.055157Jy sigma=1.316997 wmodel /J2251+4030_S_map.mod ! wmodel: Unable to open new model file: /J2251+4030_S_map.mod ! Error occured in command: wmodel ![Exited script file: /opt64/bin/pima_mupet_01.dfm] ! wmap /scr/pima/bg219h_uvs/J2251+4030_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.544 x 5.8 at -11.68 degrees (North through East) ! Clean map min=-0.0020463 max=0.051652 Jy/beam ! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2251+4030_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0516517 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000480471 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.79064 2.79064 5.58129 11.1626 22.3251 44.6503 89.3006 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.051 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 107.502 quit ! Quitting program ! Log file /scr/pima/bg219h_uvs/J2251+4030_S_dfm.log closed on Thu May 19 22:45:34 2016