! Started logfile: /scr/pima/bg219h_uvs/J2247+4723_X_dfm.log on Thu May 19 22:45:12 2016
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /scr/pima/bg219h_uvs/J2247+4723_X_uva.fits
! Reading UV FITS file: /scr/pima/bg219h_uvs/J2247+4723_X_uva.fits
! AN table 1: 61 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.791257 visibilities/baseline/integration-bin.
! Found source: J2247+4723
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 134 lines of history.
! 
! Reading 26064 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J2247+4723_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 78 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002272Jy  sigma=23.777558
! Fit after  self-cal, rms=0.928939Jy  sigma=22.038457
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6981 mas, bmaj=1.11 mas, bpa=-11.72 degrees
! Estimated noise=0.412845 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0543849 Jy
! Component: 100  -  total flux cleaned = 0.0663665 Jy
! Total flux subtracted in 100 components = 0.0663665 Jy
! Clean residual min=-0.003357 max=0.004373 Jy/beam
! Clean residual mean=-0.000002 rms=0.000761 Jy/beam
! Combined flux in latest and established models = 0.0663665 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0663665 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.066928Jy  sigma=1.424311
! Fit after  self-cal, rms=0.066266Jy  sigma=1.409580
! Inverting map 
! Added new window around map position (-11.6, 1.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00525508 Jy
! Component: 100  -  total flux cleaned = 0.00864013 Jy
! Total flux subtracted in 100 components = 0.00864013 Jy
! Clean residual min=-0.003082 max=0.003021 Jy/beam
! Clean residual mean=-0.000001 rms=0.000657 Jy/beam
! Combined flux in latest and established models = 0.0750066 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 12 components and 0.0750066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065663Jy  sigma=1.393496
! Fit after  self-cal, rms=0.065650Jy  sigma=1.393107
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.922 mas, bmaj=1.434 mas, bpa=-11.68 degrees
! Estimated noise=0.199178 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00406061 Jy
! Component: 100  -  total flux cleaned = 0.00625237 Jy
! Component: 150  -  total flux cleaned = 0.00760895 Jy
! Component: 200  -  total flux cleaned = 0.0081398 Jy
! Total flux subtracted in 200 components = 0.0081398 Jy
! Clean residual min=-0.001485 max=0.002552 Jy/beam
! Clean residual mean=-0.000001 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.0831464 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 25 components and 0.0831464 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065395Jy  sigma=1.386514
! Fit after  self-cal, rms=0.065397Jy  sigma=1.386365
! Inverting map 
! Added new window around map position (-18.8, 2.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161405 Jy
! Component: 100  -  total flux cleaned = 0.00197471 Jy
! Component: 150  -  total flux cleaned = 0.00220022 Jy
! Component: 200  -  total flux cleaned = 0.00234176 Jy
! Total flux subtracted in 200 components = 0.00234176 Jy
! Clean residual min=-0.001676 max=0.001319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000329 Jy/beam
! Combined flux in latest and established models = 0.0854882 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 36 components and 0.0854882 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.065322Jy  sigma=1.384526
! Fit after  self-cal, rms=0.065312Jy  sigma=1.384298
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.922 x 1.434 at -11.68 degrees (North through East)
! Clean map  min=-0.0014271  max=0.073713 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.02     HN        1.05     KP        1.00     
!   LA        0.96     MK        1.01     NL        1.01     OV        0.99     
!   PT        1.01     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.97     HN        0.97     KP        1.00     
!   LA        1.00     MK        1.03     NL        0.94     OV        1.05     
!   PT        0.97     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.02     HN        0.89     KP        0.99     
!   LA        0.92     MK        1.01     NL        0.99     OV        0.97     
!   PT        1.05     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        0.97     KP        0.97     
!   LA        0.97     MK        1.02     NL        1.07     OV        1.04     
!   PT        1.00     SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.97     KP        1.01     
!   LA        0.97     MK        1.08     NL        1.01     OV        0.99     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.03     HN        0.95     KP        1.00     
!   LA        1.01     MK        1.00     NL        1.00     OV        0.99     
!   PT        1.04     SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.02     HN        0.90     KP        1.01     
!   LA        1.02     MK        0.96     NL        1.05     OV        1.02     
!   PT        1.00     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.02     HN        0.97     KP        1.02     
!   LA        0.97     MK        1.06     NL        1.10     OV        1.04     
!   PT        1.02     SC        0.98     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.00     HN        0.98     KP        1.03     
!   LA        0.95     MK        0.96     NL        1.08     OV        0.98     
!   PT        0.96     SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     HN        0.96     KP        1.05     
!   LA        0.94     MK        0.99     NL        1.04     OV        1.04     
!   PT        0.98     SC        0.95     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.02     HN        0.94     KP        0.97     
!   LA        0.92     MK        1.02     NL        0.96     OV        1.01     
!   PT        1.06     SC        1.06     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.94     HN        0.93     KP        1.02     
!   LA        1.00     MK        0.95     NL        1.12     OV        1.01     
!   PT        1.02     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.065312Jy  sigma=1.384298
! Fit after  self-cal, rms=0.063833Jy  sigma=1.381302
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9202 mas, bmaj=1.43 mas, bpa=-11.39 degrees
! Estimated noise=0.19761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000650383 Jy
! Component: 100  -  total flux cleaned = 0.000784135 Jy
! Component: 150  -  total flux cleaned = 0.000863806 Jy
! Component: 200  -  total flux cleaned = 0.000937189 Jy
! Total flux subtracted in 200 components = 0.000937189 Jy
! Clean residual min=-0.001314 max=0.001246 Jy/beam
! Clean residual mean=0.000001 rms=0.000299 Jy/beam
! Combined flux in latest and established models = 0.0864253 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 49 components and 0.0864253 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063816Jy  sigma=1.380938
! Fit after  self-cal, rms=0.063801Jy  sigma=1.380770
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063801Jy  sigma=1.380770
! Fit after  self-cal, rms=0.063947Jy  sigma=1.378170
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9234 mas, bmaj=1.422 mas, bpa=-11.76 degrees
! Estimated noise=0.197712 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000619957 Jy
! Component: 100  -  total flux cleaned = 0.000748457 Jy
! Component: 150  -  total flux cleaned = 0.000809663 Jy
! Component: 200  -  total flux cleaned = 0.000850974 Jy
! Total flux subtracted in 200 components = 0.000850974 Jy
! Clean residual min=-0.001125 max=0.001219 Jy/beam
! Clean residual mean=0.000000 rms=0.000257 Jy/beam
! Combined flux in latest and established models = 0.0872763 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 60 components and 0.0872763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063936Jy  sigma=1.377938
! Fit after  self-cal, rms=0.063951Jy  sigma=1.377816
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (28.2, -29.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000793411 Jy
! Component: 100  -  total flux cleaned = 0.000790361 Jy
! Component: 150  -  total flux cleaned = 0.000823246 Jy
! Component: 200  -  total flux cleaned = 0.00086592 Jy
! Total flux subtracted in 200 components = 0.00086592 Jy
! Clean residual min=-0.001073 max=0.001110 Jy/beam
! Clean residual mean=-0.000000 rms=0.000244 Jy/beam
! Combined flux in latest and established models = 0.0881422 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 72 components and 0.0881422 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063932Jy  sigma=1.377358
! Fit after  self-cal, rms=0.063929Jy  sigma=1.377297
! Inverting map 
! Added new window around map position (24.8, 34.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000829847 Jy
! Component: 100  -  total flux cleaned = 0.00109951 Jy
! Component: 150  -  total flux cleaned = 0.00119045 Jy
! Component: 200  -  total flux cleaned = 0.00125602 Jy
! Total flux subtracted in 200 components = 0.00125602 Jy
! Clean residual min=-0.001007 max=0.000950 Jy/beam
! Clean residual mean=-0.000000 rms=0.000236 Jy/beam
! Combined flux in latest and established models = 0.0893983 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 88 components and 0.0893983 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063910Jy  sigma=1.376920
! Fit after  self-cal, rms=0.063909Jy  sigma=1.376897
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063909Jy  sigma=1.376897
! Fit after  self-cal, rms=0.063791Jy  sigma=1.376839
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9236 mas, bmaj=1.422 mas, bpa=-11.84 degrees
! Estimated noise=0.197484 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000271299 Jy
! Component: 100  -  total flux cleaned = 0.000400112 Jy
! Component: 150  -  total flux cleaned = 0.000490536 Jy
! Component: 200  -  total flux cleaned = 0.000576262 Jy
! Total flux subtracted in 200 components = 0.000576262 Jy
! Clean residual min=-0.000985 max=0.000962 Jy/beam
! Clean residual mean=-0.000000 rms=0.000232 Jy/beam
! Combined flux in latest and established models = 0.0899745 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 92 components and 0.0899745 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063783Jy  sigma=1.376686
! Fit after  self-cal, rms=0.063782Jy  sigma=1.376681
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131033 Jy
! Component: 100  -  total flux cleaned = 0.000198547 Jy
! Component: 150  -  total flux cleaned = 0.000288436 Jy
! Component: 200  -  total flux cleaned = 0.000349476 Jy
! Total flux subtracted in 200 components = 0.000349476 Jy
! Clean residual min=-0.000989 max=0.000953 Jy/beam
! Clean residual mean=-0.000000 rms=0.000230 Jy/beam
! Combined flux in latest and established models = 0.090324 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 99 components and 0.090324 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063777Jy  sigma=1.376580
! Fit after  self-cal, rms=0.063777Jy  sigma=1.376575
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063777Jy  sigma=1.376575
! Fit after  self-cal, rms=0.063733Jy  sigma=1.376566
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.311 mas, bmaj=2.556 mas, bpa=-29.81 degrees
! Estimated noise=0.250796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000289392 Jy
! Component: 100  -  total flux cleaned = 0.000476836 Jy
! Component: 150  -  total flux cleaned = 0.000626246 Jy
! Component: 200  -  total flux cleaned = 0.000738526 Jy
! Total flux subtracted in 200 components = 0.000738526 Jy
! Clean residual min=-0.001106 max=0.000921 Jy/beam
! Clean residual mean=-0.000000 rms=0.000266 Jy/beam
! Combined flux in latest and established models = 0.0910626 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 114 components and 0.0910626 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063731Jy  sigma=1.376539
! Fit after  self-cal, rms=0.063731Jy  sigma=1.376526
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.23624e-05 Jy
! Component: 100  -  total flux cleaned = 0.000118721 Jy
! Component: 150  -  total flux cleaned = 0.000162403 Jy
! Component: 200  -  total flux cleaned = 0.000195257 Jy
! Total flux subtracted in 200 components = 0.000195257 Jy
! Clean residual min=-0.001107 max=0.000907 Jy/beam
! Clean residual mean=0.000000 rms=0.000264 Jy/beam
! Combined flux in latest and established models = 0.0912578 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 120 components and 0.0912578 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063730Jy  sigma=1.376525
! Fit after  self-cal, rms=0.063730Jy  sigma=1.376522
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9235 mas, bmaj=1.422 mas, bpa=-11.88 degrees
! Estimated noise=0.197494 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9235 x 1.422 at -11.88 degrees (North through East)
! Clean map  min=-0.00092729  max=0.073159 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6984 mas, bmaj=1.102 mas, bpa=-11.95 degrees
! Estimated noise=0.408584 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541938 Jy
! Component: 100  -  total flux cleaned = 0.0662564 Jy
! Component: 150  -  total flux cleaned = 0.0715198 Jy
! Component: 200  -  total flux cleaned = 0.0752858 Jy
! Total flux subtracted in 200 components = 0.0752858 Jy
! Clean residual min=-0.002630 max=0.002661 Jy/beam
! Clean residual mean=-0.000002 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.0752859 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0752859 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9235 mas, bmaj=1.422 mas, bpa=-11.88 degrees
! Estimated noise=0.197494 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00443518 Jy
! Component: 100  -  total flux cleaned = 0.00703798 Jy
! Component: 150  -  total flux cleaned = 0.00892834 Jy
! Component: 200  -  total flux cleaned = 0.0103479 Jy
! Total flux subtracted in 200 components = 0.0103479 Jy
! Clean residual min=-0.001192 max=0.001035 Jy/beam
! Clean residual mean=-0.000002 rms=0.000281 Jy/beam
! Combined flux in latest and established models = 0.0856337 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 28 components and 0.0856337 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.311 mas, bmaj=2.556 mas, bpa=-29.81 degrees
! Estimated noise=0.250796 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00151267 Jy
! Component: 100  -  total flux cleaned = 0.00219631 Jy
! Component: 150  -  total flux cleaned = 0.00272176 Jy
! Component: 200  -  total flux cleaned = 0.00317214 Jy
! Total flux subtracted in 200 components = 0.00317214 Jy
! Clean residual min=-0.001150 max=0.000968 Jy/beam
! Clean residual mean=-0.000001 rms=0.000294 Jy/beam
! Combined flux in latest and established models = 0.0888059 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390638 Jy
! Component: 100  -  total flux cleaned = 0.000730435 Jy
! Component: 150  -  total flux cleaned = 0.00102698 Jy
! Component: 200  -  total flux cleaned = 0.00128851 Jy
! Total flux subtracted in 200 components = 0.00128851 Jy
! Clean residual min=-0.001100 max=0.000914 Jy/beam
! Clean residual mean=-0.000001 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.0900944 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 58 components and 0.0900944 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9235 mas, bmaj=1.422 mas, bpa=-11.88 degrees
! Estimated noise=0.197494 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000332885 Jy
! Component: 100  -  total flux cleaned = 0.000509514 Jy
! Component: 150  -  total flux cleaned = 0.000621638 Jy
! Component: 200  -  total flux cleaned = 0.000683372 Jy
! Total flux subtracted in 200 components = 0.000683372 Jy
! Clean residual min=-0.001063 max=0.000936 Jy/beam
! Clean residual mean=-0.000000 rms=0.000234 Jy/beam
! Combined flux in latest and established models = 0.0907778 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.0907778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.063754Jy  sigma=1.376944
! Fit after  self-cal, rms=0.063750Jy  sigma=1.376875
wmodel /J2247+4723_X_map.mod
! wmodel: Unable to open new model file: /J2247+4723_X_map.mod
! Error occured in command: wmodel
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap /scr/pima/bg219h_uvs/J2247+4723_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9235 x 1.422 at -11.88 degrees (North through East)
! Clean map  min=-0.00094089  max=0.07321 Jy/beam
! Writing clean map to FITS file: /scr/pima/bg219h_uvs/J2247+4723_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.0732102 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000231547 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.948832 0.948832 1.89766 3.79533 7.59066 15.1813 30.3626 60.7252
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.073 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  316.178 
quit
! Quitting program
! Log file /scr/pima/bg219h_uvs/J2247+4723_X_dfm.log closed on Thu May 19 22:45:15 2016